アイネックス Product Lineup

The 『PM-HDMIV20A08』 is a high-speed HDMI extension cable compatible with Ethernet. It extends the HDMI connector on the rear/expansion card, allowing you to install the connector in any location such as the front or rear panel. The nut is embedded in the mold and is secured with the included screws. It features triple shielding and durable gold-plated pins/gold-plated connectors. 【Specifications (partial)】 ■ Connector type - Rear/expansion card side: HDMI female (Type A 19-pin) - Chassis panel side: HDMI male (Type A 19-pin) ■ Color: Black ■ Cable diameter: 6.0mm ■ Cable length: 80cm *For more details, please download the PDF or feel free to contact us.

• Other cable related products

The "RS-300B" is a serial rear slot that extends a connector from the serial header on the motherboard to the rear slot. To accommodate motherboards with a serial header near the memory slots, the cable is a longer 47cm. It features a set pin type for easy connection to the motherboard and is compatible with low-profile PCI slots. 【Specifications】 ■ Connector Type - Rear Slot Side: D-Sub 9-pin Male x1 - Motherboard Side: 2x5-pin Female x1 ■ Cable Length: 47cm ■ Accessories: PCI bracket x1, low-profile PCI bracket x1 ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• Other Connectors

The "RS-003D" is a USB 3.0 rear slot that allows you to extend connectors from the USB 3.0 header on the motherboard to the rear slot. Make effective use of unused onboard USB ports. The pin set type makes it easy to connect to the motherboard. Both the cable and bracket are black in color. They are unobtrusive, making them suitable for illuminated PCs or internally painted black cases. 【Specifications (partial)】 ■ For rear slot (supports full height/low profile) ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed (5Gbps: theoretical value) compatible ■ Connector shape ・Rear slot side: USB 3.0 Standard-A female x2 ・Motherboard side: 2x10 pin female *For more details, please download the PDF or feel free to contact us.

• Other Connectors

The "RS-004C" is a USB rear slot that allows you to extend a connector from the USB 2.0 header on the motherboard to the rear slot. Make effective use of unused onboard USB ports. It features a pin header type for easy connection to the motherboard. It can be used with 4 ports. This is a model change from "RS-004B." There are no differences. The pin arrangement conforms to general guidelines. 【Specifications (partial)】 ■ For rear slot use ■ Supported standards: USB 2.0/1.1 ■ Connector shape ・ Rear slot side: USB 2.0 Standard-A female x4 ・ Motherboard side: 2x5 pin female x2 ■ Cable length: 30cm *For more details, please download the PDF or feel free to contact us.

• Other Connectors

The "RS-002F" is a USB rear slot that allows you to extend a connector from the USB 2.0 header on the motherboard to the rear slot. Make effective use of unused onboard USB. It features a set pin type for easy connection to the motherboard. It can be used with 2 ports and is compatible with low-profile slots. It is a model change of "RS-002E." There are no differences. 【Specifications (partial)】 ■ For rear slot (supports full height/low profile) ■ Supported standards: USB 2.0/1.1 ■ Connector configuration - Rear slot side: USB 2.0 Standard-A female x2 - Motherboard side: 2x5 pin female x1 ■ Cable length: 30cm *For more details, please download the PDF or feel free to contact us.

• Other Connectors

The 『EX-006A』 is a cable that allows for easy connection and disconnection of connectors, effectively preventing incorrect connector insertion. It consolidates the individual pin connectors for Front Panel I/O (such as front panel switches, LEDs, audio, USB 2.0, IEEE 1394, etc.) for easy connection to the motherboard. It is compatible with 2.54mm pitch connectors. With a length of 15cm, it is suitable for extensions and rear wiring. 【Specifications (partial)】 ■ Cable side: 2x5 pin male ■ Motherboard side: 2x5 pin female ■ Connector: 2.54mm pitch ■ Cable length: 15cm ■ Color: Black ■ 1 piece included *For more details, please download the PDF or feel free to contact us.

• Other cable related products

The "EX-004A" is an easy-to-remove and attach cable that effectively prevents incorrect connector insertion. It consolidates the individual pin connectors for Front Panel I/O (such as front panel switches/LEDs/audio/USB 2.0/IEEE 1394) for easy connection to the motherboard. It is compatible with 2.54mm pitch connectors. 【Specifications】 ■Cable side: 2x5 pin male ■Motherboard side: 2x5 pin female ■Connector: 2.54mm pitch ■Cable length: 3cm ■2 pieces included ■Compliant with RoHS directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• Other cable related products

The "EX-002A" is a pin conversion cable used when the pin arrangement on the motherboard differs from that of LED/USB 2.0/IEEE 1394 cables. It features a connector designed to prevent disconnection. The connector has a 2.54mm pitch, and the cable length is 4.5cm. It includes a total of 8 wires: 2 red, 2 white, 2 green, and 2 black. This is a model change of "EX-002." There are no differences. It cannot be used with connectors of different pitches (such as USB 3.0). 【Specifications】 ■ Connector designed to prevent disconnection ■ Connector: 2.54mm pitch ■ Cable length: 4.5cm ■ Total of 8 wires included (2 red, 2 white, 2 green, 2 black) ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• Other cable related products

The "KM-09" is a power checker that connects between a USB Type-C (USB-C) power source and a device, alternatingly displaying the supplied voltage/power. It supports a maximum power display of 140W and is compatible with USB PD (Power Delivery) 3.1 voltage. It supports bidirectional current, so it does not require a specific insertion direction. The main unit is compact, making it easy to carry and not taking up much space when plugged into a cable. The display is easy to read with an 8-segment blue LED. 【Specifications (partial)】 ■ Display content: Voltage/Power/PD operation display ■ Maximum supported power: 140W ■ Maximum data transfer speed: 40Gbps (theoretical value) ■ USB PD (Power Delivery) 3.1: Supported ■ DisplayPort Alt mode: Supported ■ eMarker: Not equipped *For more details, please download the PDF or feel free to contact us.

• Power Supplies

The "KM-08" is a power tester that connects between a USB Type-C (USB-C) power source and a device, allowing you to check various information such as voltage, current, power, current direction, D+, D-, CC, and more. It supports a maximum power display of 240W and is compatible with USB PD (Power Delivery) 3.1 voltage. Since it supports bidirectional current, you do not need to choose the direction of insertion. It also displays the direction of the current. The color LCD makes it easy to read the display. 【Specifications (partial)】 ■ Display contents: Voltage / Current / Power / D+ Voltage / D- Voltage / CC Voltage / Current direction / Usage time / Cumulative power during use (energy amount) ■ Compatible with USB PD (Power Delivery) 3.1 ■ Maximum supported power: 240W ■ Operating temperature range: 0 to 40℃ ■ Compliant with USB Type-C standards *For more details, please download the PDF or feel free to contact us.

• Power Supplies

The "KM-02C" is an ATX power supply testing board that allows for operation verification without incorporating internal parts/peripherals into the case. It features a toggle switch and switch cable, enabling power On/Off in two different ways, which is convenient. (Even when the toggle switch is Off, power can still be turned On/Off via the switch cable.) By connecting a case LED to the LED connector, you can check for power at your fingertips. It is also useful when using multiple power supplies simultaneously. 【Specifications】 ■ 1 shared connector for 20/24-pin main power supply, 1 3-pin connector for fans, and 1 LED connector ■ Includes power-on LED ■ Insulating plate with double-sided tape on the back of the board to prevent short circuits ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• switch
• switch

The "KM-07A" is a long 75cm switch/LED cable that is convenient for testing. It is suitable as a replacement for motherboard testing or if the power/reset switch of the main unit fails. To easily identify which switch is which, there is a black ink mark on the power switch side. To accommodate a 1x3 pin header, the power LED connector uses two separate 1-pin connectors. 【Specifications (partial)】 ■ Power Switch: Push Switch ■ Reset Switch: Push Switch ■ Power LED: Red, 5mm diameter ■ HDD LED: Green, 5mm diameter ■ Switch Operation: Momentary (Non-locking type) ■ Connector Pitch: 2.54mm *For more details, please download the PDF or feel free to contact us.

• switch
• switch

The "KM-01A" is a set of a very short cable length switch and LED. It is very convenient for motherboard testing, and it is a modified version of the "KM-01." There are no differences. Starting from the shipments around September 2022, the specifications have changed. The printing on the Power LED connector now only shows POWER LED- on the negative side. 【Set Contents】 ■Power Switch ×1 ■Reset Switch ×1 ■Power LED ×1 ■HDD LED ×1 ■Speaker ×1 *For more details, please download the PDF or feel free to contact us.

• switch
• switch

The "BZ-01A" is a buzzer unit with a short cable that is very convenient for testing motherboards. It connects to the speaker terminals on the motherboard. There is no need to secure it to the case, making installation easy. It is a model change of "BZ-01". There are no differences. It is a standalone package of the "KM-01" speaker. 【Specifications (partial)】 ■ Connector: 2.54mm pitch ■ Polarity (will sound regardless of polarity) - Positive: Black (with + symbol on the speaker) - Negative: White ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• switch
• switch

The "DTE-03" is a switch that allows you to control the power of your computer from a distance, right at your fingertips. The switch has a structure similar to that of a mechanical keyboard, providing a pleasant typing experience. It has a built-in magnet on the bottom, allowing it to be placed on any magnet-compatible surface. For surfaces that are not magnet-compatible, you can use the included metal plate with double-sided tape for installation. 【Specifications (partial)】 ■ Switch: Push switch (momentary operation) ■ Connector pitch: 2.54mm ■ Main cable: Cable length approximately 2m (directly attached to the main unit) ■ LED: Blue ■ Color: Black ■ Accessories: Internal connection branching connector, metal plate with double-sided tape *For more details, please download the PDF or feel free to contact us.

• switch
• switch

The "DTE-02" is a switch that allows you to operate the power/reset functions of your computer from a distance, right at your fingertips. It is also suitable as a replacement in case the main unit's power/reset switch fails. You can extend the power LED from the motherboard, and the blue ring will light up blue when the power is on. Two USB 2.0 ports are extended from the motherboard to the front, making it convenient for using USB devices. It can be fixed to your desk with double-sided tape on the bottom. 【Specifications (partial)】 ■ Switch - Power: Push switch - Reset: Push switch - Switch operation: Momentary (non-locking type) *For more details, please download the PDF or feel free to contact us.

• switch
• switch

The "PA-045B" is a reset switch kit used to reset a computer. It can be used for repairs or other DIY projects. It can also be used as a power switch. Please check if the specifications are compatible with your usage environment. This is a model change from "PA-045A." There are no differences. Feel free to contact us if you have any inquiries. 【Specifications】 ■ Push switch ■ Momentary operation (non-lock type) ■ Connector pitch: 2.54mm ■ Cable length: 50cm ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• switch
• switch

The "PA-062B" is an ATX power switch kit that you press when turning on your computer. When the power does not turn on, it is often the case that the switch is faulty. It can also be used as a reset switch. Please check if the specifications are suitable for your usage environment. Feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Push switch ■ Momentary operation (non-lock type) ■ Mounting hole: M3 ■ Mounting hole pitch: 20mm ■ Connector pitch: 2.54mm ■ Cable length: 100cm *For more details, please download the PDF or feel free to contact us.

• switch
• switch

The "PB-042B" is a plastic fixing pin for Intel genuine LGA775/LGA115x/LGA1200/LGA1366/LGA1700 coolers. It is used when the original pins are broken. Set of 4, compliant with RoHS directive (10 substances). This is a model number change from "PB-042A". There is no difference. Please feel free to contact us when you need it. 【Specifications】 ■ Set of 4 ■ Compliant with RoHS directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• Screw

The "MK-04C" is a pure copper guard plate for AMD AM5 CPUs. The inside of the frame is shaped to fit the heat spreader and is used by fitting it onto the CPU. Since a frame is added to the outside of the CPU, applying thermal grease becomes easier. By adding a pure copper frame to the CPU, improvements in heat dissipation are expected. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Compatible CPU: AMD AM5 ■ Size: W45×D45×H0.6mm ■ Material: Pure copper ■ Accessories: Spatula for applying thermal grease *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "CSF-01" is a frame designed to prevent warping issues with Intel LGA1700 CPUs. Replace the ILM included with the motherboard with this product. By attaching a metal frame to the CPU, it is expected to improve heat dissipation. The short edge on the back of the product is covered with a hard PVC insulating material. It is black, making it easy to match the color of the computer's interior. A screwdriver for installation is included. 【Specifications (partial)】 ■ Compatible CPU: Intel LGA1700 ■ Size: W73.5×D54×H5.5mm ■ Material ・Warp prevention frame: Made of aluminum ・Insulating material: Made of PVC ・T20 screwdriver: Made of aluminum *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "BM-AM5" is a retention mechanism specifically designed for Socket AM5 motherboards. The protrusions on the bottom of the retention mechanism correspond to the mounting holes on the motherboard, making it easy to align the orientation and position. It is recommended when the original part is broken or lost. The installation of the retention mechanism requires a backplate that is fixed to the motherboard. Please feel free to contact us when you need assistance. 【Specifications】 ■Retention: Made of plastic ■Contents ・Retention x2 ・Mounting screws x4 *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "BM-AM4B" is a retention mechanism with a backplate specifically designed for Socket AM4 motherboards. It can be fixed with the retention mechanism, and it is also compatible with CPU coolers that utilize the screw holes of the original backplate. The protrusions on the bottom of the retention mechanism correspond to the mounting holes on the motherboard, making it easy to align the orientation and position. 【Specifications】 ■ Retention: Made of plastic ■ Backplate: Made of SPCC ■ Contents: Retention x2, backplate, fixing screws x4 ■ A revised model of BM-AM4A *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "BS-1700" is a CPU cooler backplate specifically designed for Intel's genuine LGA1700 retail cooler. It is suitable for those who feel uneasy about standard pin fixation or find installation difficult. It is installed on top of the ILM backplate that comes with the motherboard. The use of springs increases the contact pressure, enhancing the CPU's thermal conductivity. An insulating sheet is already attached to the contact surface with the motherboard. [Contents] ■ Backplate main body ■ Spacer screws x4 ■ Springs x4 ■ E-rings x4 *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "BS-1156B" is a heat sink backplate specifically designed for Intel genuine LGA1156/LGA1155/LGA1151/LGA1150 retail coolers. It is suitable for those who feel uneasy about standard pin fixation or find installation difficult. It is installed on top of the ILM backplate that comes with the motherboard. By securing it with the backplate, the distortion of the motherboard is reduced. The use of springs increases the contact pressure, enhancing the thermal conductivity of the CPU. 【Contents】 ■ Main plate ■ Spacer screws x4 ■ Springs x4 ■ E-rings x4 *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "PC-Z05C-SRB" is a side-flow CPU cooler compatible with both Intel and AMD, designed for the LGA1851 socket. Despite being equipped with five 6mm diameter copper heat pipes, it is the same size as CPU coolers with four heat pipes. The MHDB (Hydro-Dynamic Bearing with Magnetic stabilization) fan achieves both quiet operation and effective cooling. 【Features】 - With a height of 157mm, it is compact enough to fit in narrow PC cases. - Can be installed with fewer parts and is easy to assemble. - Copper heat pipes make direct contact with the CPU for efficient cooling. - The fins are offset from the base towards the rear to avoid interference with memory. - Equipped with a 120mm square PWM 4-pin fan. - Vibration pads reduce fan noise. *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "G-130BK" is a side-flow CPU cooler compatible with both Intel and AMD, designed for LGA1851. The top cover display allows you to check the CPU temperature. With a height of 132mm, it is compact enough to fit in mini tower cases with limited internal space. The 92mm square fan is equipped with ARGB LED. You can connect the ARGB LED 3-pin cable to a motherboard with control functions to change the colors and lighting effects. 【Features】 ■ Easy installation with fewer parts and simple steps ■ Copper heat pipes make direct contact with the CPU for efficient cooling ■ Despite its small size, it features four 6mm diameter pipes ■ The fins are offset from the base to avoid interference with memory ■ Supports a maximum TDP of 180W ■ Vibration-damping pads reduce fan noise *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "NI01LP-9225SP" is a push-pin CPU cooler for LGA115x/1200. With a height of 45mm, it is compatible with small PC cases. It features a quiet fan with a maximum noise level of 37dB(A). As a top-flow type, the airflow from the cooling fan flows downward, making it effective for cooling electronic components around the CPU. The radial aluminum heatsink exhibits excellent heat dissipation performance, and the PWM fan achieves efficient cooling while minimizing noise. 【Fan Specifications (partial)】 ■ Speed: 1000±25% to 3000rpm±15% ■ Maximum airflow: 52.62CFM ■ Maximum noise level: 37dB(A) ■ Rated voltage: DC12V ■ Maximum power consumption: 3.36W ■ Size: 95×95×25mm *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "CC-09" is a CPU cooler with a unique copper base design and a quiet fan, designed for LGA1700. With a height of 64mm, it is compatible with small PC cases. It uses pre-installed spring screws for easy and secure attachment to the backplate. The uniquely designed copper core directly cools the heat-generating areas more efficiently. The radial aluminum heatsink maximizes heat dissipation, and the PWM fan provides optimal cooling with minimal noise levels. 【Fan Specifications (partial)】 ■ Speed: 900±300 to 2200rpm±10% ■ Maximum airflow: 46CFM ■ Maximum noise level: 19dB(A) ■ Rated input: DC12V ■ Maximum output: 1.44W *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "CC-06B" is a CPU cooler with blue LED lights designed for LGA115x sockets. With a height of 62mm, it is compatible with compact PC cases. As a top-flow type, the airflow from the cooling fan flows downward, making it effective for cooling electronic components around the CPU. The copper core directly cools the heat-generating parts. The radial aluminum heatsink maximizes heat dissipation, and the PWM fan provides optimal cooling with minimal noise levels. 【Fan Specifications (Partial)】 ■ Speed: 900±300 to 2200rpm±10% ■ Maximum airflow: 45CFM ■ Maximum noise level: 20dB(A) ■ Rated input: DC12V 2.16W ■ Size: 96×96×25mm ■ Sleeve bearing *For more details, please download the PDF or feel free to contact us.

• Cooling system

The "CC-06S" is a CPU cooler equipped with a quiet fan for LGA115x, with a height of 62mm, making it compatible with compact PC cases. Being a top-flow type, the airflow from the cooling fan flows downward, effectively cooling the electronic components around the CPU. It uses pre-installed spring screws, allowing for easy and secure attachment to the backplate. The copper core directly cools the heat-generating parts. 【Fan Specifications (Partial)】 ■ Speed: 800±300 to 2200rpm±10% ■ Maximum Airflow: 46CFM ■ Maximum Noise Level: 19dB(A) ■ Rated Input: DC12V 1.2W ■ Size: 96×96×25mm ■ Sleeve Bearing *For more details, please download the PDF or feel free to contact us.

• Control Panel Cooler

The "CC-10" is a slim CPU cooler for LGA1700 with a copper core that directly cools from the heated area, measuring 31mm in height. As a top-flow type, the airflow from the cooling fan flows downward, making it effective for cooling electronic components around the CPU. The radial aluminum heatsink maximizes heat dissipation, and the PWM fan provides optimal cooling with minimal noise levels. 【Fan Specifications (partial)】 ■ Speed: 900±300 to 2800rpm±10% ■ Maximum airflow: 35CFM ■ Noise level: 12–33dB(A) ■ Rated input: DC12V 1.9W ■ Size: 95×95×16.8mm ■ Sleeve bearing *For more details, please download the PDF or feel free to contact us.

• Control Panel Cooler

The 『CC-01』 is a slim CPU cooler for LGA115x. With a height of 32mm, it is suitable for Mini-ITX, HTPC, and SFF systems. It features pre-installed spring screws that allow for easy and secure attachment to the backplate. It comes with a 96mm PWM 4-pin fan that uses sleeve bearings. The radial aluminum heatsink maximizes heat dissipation, while the PWM fan provides optimal cooling with minimal noise levels. 【Fan Specifications (Partial)】 ■ Speed: 700±300 to 2700RPM±10% ■ Maximum airflow: 35CFM ■ Noise level: 12 to 33dB(A) ■ Rated input: DC12V 2.4W ■ Size: 96×96×17mm (excluding protrusions) ■ Sleeve bearing *For more details, please download the PDF or feel free to contact us.

• Control Panel Cooler

The "ANT-DM" is an antenna splitter that separates television antenna signals into terrestrial digital and BS/CS. It can also be used as a mixer to combine the terrestrial digital and BS/CS antenna cables into one. Screws for fixing are included. It is compatible with terrestrial/BS/CS digital broadcasting. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Compatible with terrestrial/BS/CS digital broadcasting ■ Power supply only for BS/CS terminal ■ Frequency range ・Terrestrial: 5–860MHz ・BS/CS: 950–2500MHz ■ Accessories: Tapping screws x2 *For more details, please download the PDF or feel free to contact us.

• antenna

The "ANT-02A" is an antenna splitter that distributes television antenna signals to four outputs. It supports terrestrial/BS/CS digital broadcasting and has power passing through all ports. The frequency range is 5 to 2650 MHz. From the shipments in late June 2017, the manufacturer has changed. The external dimensions are almost the same. The diameter of the screws has been slightly reduced, and the screws are slightly shorter. It is the successor to the "ANT-02." The manufacturer has changed, and screws are now included. Additionally, it complies with the RoHS directive. 【Specifications (partial)】 ■ Supports terrestrial/BS/CS digital broadcasting ■ Power passing through all ports ■ Frequency range: 5 to 2650 MHz ■ Connector type ・Input: F-type jack ・Output: F-type jack x 4 *For more details, please download the PDF or feel free to contact us.

• antenna

The "ANT-01A" is an antenna splitter that divides a television antenna signal into two outputs. It supports terrestrial/BS/CS digital broadcasting and has power passing through all terminals. The frequency range is 5 to 2650 MHz. From the shipments in late June 2017, the manufacturer has changed. The external dimensions are almost the same. The diameter of the screws has slightly decreased, and the screws have become slightly shorter. It is the successor to the "ANT-01." The manufacturer has changed, and screws are now included. Additionally, it complies with the RoHS directive. 【Specifications (partial)】 ■ Supports terrestrial/BS/CS digital broadcasting ■ Power passing through all terminals ■ Frequency range: 5 to 2650 MHz ■ Connector type ・Input: F-type jack ・Output: F-type jack x 2 *For more details, please download the PDF or feel free to contact us.

• antenna

We offer the antenna cable 'F4C Series' for connecting wall-mounted TVs and recorders. Our lineup includes the "F4C-10" with a cable length of approximately 1m and the "F4C-03" with a cable length of approximately 0.3m. These cables are compatible with satellite broadcasting. Both ends feature a straight type F connector plug. The screw-type plug ensures a secure connection. 【Features】 ■ Connects wall-mounted TV outlets to TVs and recorders ■ Both ends have a straight type F connector plug ■ Secure connection due to screw-type plug ■ Compatible with terrestrial/BS/CS digital broadcasting ■ Double shielding ■ Gold-plated terminals *For more details, please download the PDF or feel free to contact us.

• Other cable related products

The "MSW-03A" is an HDMI switch that allows you to connect three HDMI devices to a display. You can connect devices such as a computer, HDD recorder, Blu-ray/DVD player, and game console. It enables you to set up an environment with both a work computer and a personal computer on a single display. If you are short on HDMI ports, you won't need to swap cables. It supports high resolutions up to 4K (3840×2160) at 60Hz. 【Specifications (partial)】 ■ Supported resolutions: 480p to 2160p ■ 4K 60p/HDR support ■ 4K (2160p)/60Hz support ■ 3D TV compatible ■ HDCP 2.2 compliant ■ Deep Color display support *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "MSW-02" is an HDMI switcher that can connect two HDMI devices to a display. It allows you to switch one device to two HDMI outputs. You can connect a computer, HDD recorder, Blu-ray/DVD player, game console, and more. You can set up an environment with a telework PC and a personal PC on a single display. If you are short on HDMI ports, you won't need to swap cables. It supports high resolutions up to 4K (3840×2160)/60Hz. 【Specifications (partial)】 ■ Supported resolutions: 480p to 2160p ■ 4K 60p/HDR compatible ■ 4K (2160p)/60Hz compatible ■ 3D TV compatible ■ HDCP 2.2 compatible ■ Deep Color display compatible *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "AMC-USBHDW" is a USB-HDMI x2 conversion adapter that supports high resolutions up to 4K (2160p). It allows for easy setup of a multi-display environment. The screen display supports both duplicate and extended modes. Additionally, it can display in both duplicate and extended modes simultaneously. Equipped with a dedicated graphics chip (DL-6950), it does not rely on the computer's built-in graphics chip. 【Features】 ■ Supports high resolutions up to 4K UHD (4K (2160p), 3840×2160) / 60Hz ■ Compatible with both USB Type-C and Type-A ■ Easily connects to laptops and desktop computers ■ Supports Windows 10/11 (32/64bit) ■ Up to three units of this product can be connected to one computer ■ The aluminum body is highly durable and has good heat dissipation *For more details, please download the PDF or feel free to contact us.

• Converters and Transducers

The 『ADV-CHD01』 is a conversion adapter that allows a computer equipped with a USB Type-C (USB-C) port to connect to a display's HDMI port using a Type-C cable. It outputs video and audio from the computer to HDMI-equipped displays/TVs. It is suitable for presentations using HDMI-equipped TVs from laptops with Type-C ports. It supports high resolutions up to 4K UHD (4K (2160p), 3840×2160)/60Hz. 【Specifications】 ■ Connector Type - Computer side: USB Type-C Female - TV/Display side: HDMI Male (Type A 19-pin) ■ Size: W24×D43×H10mm (excluding connector D33mm) ■ Color: Gray *For more details, please download the PDF or feel free to contact us.

• Converters and Transducers

The "AMC-CHD20-V" is a conversion cable that allows a computer equipped with USB Type-C (USB-C) to connect to devices with HDMI. It outputs video and audio from a computer/smartphone to HDMI-equipped displays/TVs. It is suitable for presentations using an HDMI-equipped TV from a Type-C equipped laptop. It supports a maximum resolution of 4K UHD (4K (2160p), 3840×2160)/30Hz. It also supports 144Hz at 1080p, making it suitable for gaming. 【Specifications (partial)】 ■ HDCP 1.4 compliant ■ Connector type - Computer/smartphone side: USB Type-C male - TV/display side: HDMI male (Type A 19-pin) ■ System requirements: Type-C port compatible with DisplayPort Alt mode ■ Color: Black *For more details, please download the PDF or feel free to contact us.

• Other cable related products

The "AMC-CHD-V" is a conversion cable that outputs video from devices equipped with a USB Type-C port to displays/TVs with an HDMI port. It allows you to output video and audio from a computer or smartphone to HDMI-equipped displays/TVs. It is suitable for presentations using HDMI-equipped TVs from laptops with Type-C ports. It supports a maximum resolution of 2K (1080p, 1920×1080) at 60Hz. 【Specifications (partial)】 ■ Compatible with HDMI 1.4 ■ Compatible with HDCP 1.4 ■ Maximum resolution: 1920×1080/60Hz ■ Connector types ・Computer side: USB Type-C male ・Display/TV side: HDMI female (Type A 19-pin) *For more details, please download the PDF or feel free to contact us.

• Converters and Transducers

The "AMC-USBVGA" is a USB 3.0 to VGA conversion adapter that outputs video from a computer's USB 3.0 port to displays/projectors equipped with a VGA port. By using it alongside the computer's video output, a multi-display environment can be established. It supports a maximum resolution of Full HD (1920×1080) at 60Hz. Drivers can be easily installed from the folder that appears on Windows when the product is connected. Up to four of this product can be connected to a single computer. 【Specifications (partial)】 ■ USB 3.0 compliant ■ Maximum resolution: 1920×1080 (1080p) / 60Hz ■ Supported OS: Windows 10/11 (32/64bit) ■ Connector type ・Computer side: USB 3.0 Standard-A Male ・Display side: VGA Female (Mini D-Sub 15 pin) *For more details, please download the PDF or feel free to contact us.

• Converters and Transducers

The "AMC-USBHDA" is a USB 3.0 to HDMI conversion adapter that outputs video and audio from a computer's USB 3.0 port to a TV/display with an HDMI port. It allows for the creation of a multi-display environment in conjunction with the computer's video output. It supports up to Full HD (1920×1080)/60Hz. The screen display supports both duplicate and extended modes. The driver can be easily installed from the folder that appears on Windows when the product is connected. 【Specifications (partial)】 ■ Maximum resolution: 1920×1080 (1080p)/60Hz ■ Supported OS: Windows 10/11 (32/64bit) ■ Power supply: USB bus power ■ Connector type - Computer side: USB 3.0 Standard-A male - Display side: HDMI female (Type A 19-pin) *For more details, please download the PDF or feel free to contact us.

• Converters and Transducers