オガワ精機 List of Products and Services

The "OSK 40DP-26WF31E20" is an automatic consolidation testing machine that conducts consolidation tests through fully automated PC control. It supports various tests such as load increase, expansion, constant strain rate (CRS), and controlled water pressure gradient (CHG). With suitable control through a PID closed loop, it quickly, smoothly, and accurately performs and maintains each procedure. With the optional touchscreen controller, control, data storage, and text output are possible without a PC. 【Features】 ■ Conducts consolidation tests through fully automated PC control ■ Excellent quiet performance due to environmentally friendly electric servo operation ■ Compact design with a width and depth of less than 50 cm ■ Up to 60 units can be connected via software (optional) ■ Consolidation cells accommodate diameters from φ50.47 to φ112.80 mm *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Small-scale photobioreactor for research purposes

• Other physicochemical equipment

The FDA liquid contact parts are made of materials that comply with FDA standards.

• Plastic utensils and containers

The FDA contact parts use materials that comply with all FDA standards.

• Plastic utensils and containers

The FDA liquid contact parts use materials that comply with FDA standards.

• Plastic utensils and containers

The FDA liquid contact parts use materials that comply with all FDA standards.

• Plastic utensils and containers

The FDA liquid contact parts use materials that comply with all FDA standards.

• Plastic utensils and containers

Temperature can be accurately controlled in the range of room temperature to 100°C through microprocessor control. Cut-off protection function activates in case of overheating or low water volume.

• Thermostatic water bath

<Features> * Tabletop ultra-compact R&D tablet press * Capable of handling any size from a single unit in a short time * Optimization of active ingredient formulations * Supports various shapes, single-layer, and multi-layer tablets * Intuitive operation * Suitable for R&D to small batch production * Manufactured by PrivMed (Germany) ◎ This ultra-compact R&D tablet press is equipped with fully automatic dosing functionality. It allows for the individual dosing of required API amounts and programmable tablet pressing settings. Tablets can be produced in just a few minutes, and it supports multi-layer tablets, marking the arrival of the next generation of research and development tablet presses. ◎ For more details, please download the catalog or contact us.

• Food Testing/Analysis/Measuring Equipment
• Other physicochemical equipment
• Other processing machines

Microprocessor PID Control

• Drying Equipment

Up to 10 control programs can be registered, and temperature rise and fall can be automated (repeatable up to 99 times).

• Drying Equipment

Developed in collaboration with a major water utility company, it is suitable for drinking water, wastewater, and safe water monitoring.

• Water quality testing

Standard accessories for the electric digital flow meter: 4 filter plates included as standard: 5000/500/300/100 μm (size can be changed) 20 m power cable included as standard.

• Water quality testing

Usable up to a water depth of 100m.

• Water quality testing

Measuring the toughness of films, paper, and packaging materials. Two types: manual and pneumatic. Due to its compact size, it can be easily installed on a tabletop or laboratory bench without taking up much space.

• Testing Equipment and Devices

User-friendly automatic testing High repeatability accuracy Wide torque range: 0 to 10 N.m (0 to 90 lbf.in) Multiple tests completed in seconds Test result reporting Intuitive and user-friendly Emperor software Barcode tool identification (optional) Secure data storage for audit trails Reduction of operator fatigue and repetitive motion common with manual testers

• Strength Testing Equipment

Wire terminal tensile testing machine A crimp terminal test that does not require the "constant tensile speed" recommended by each standard An economical solution Space-saving, non-slip benchtop tester Adopts a base plate with scratch-resistant (hard-coated) treatment Independent power supply (solar cell or connected to a PC using USB interface) Portable and low-cost operation possible Securely grips various materials with clamping device

• Testing Equipment and Devices

Pull testing machine for wire terminals compliant with various standards Applicable standards: IPC/WHMA-A-620, UL 486, ASTM B913, USCAR 21, EN 2591-417, MIL-STD 202-H, NASA 8739-4, etc. Compact and robust benchtop type. Features a hardened, scratch-resistant base plate. Three testing modes available: destructive, non-destructive, and a third mode. Selectable constant pull speeds in 7 steps ranging from 10 to 200 mm/min. Two models with capacities of 500N and 1000N. Sturdy and compact.

• Testing Equipment and Devices

User-friendly and quick operability Three operation modes Economic solution Modular system Compact & portable (battery-operated) Robustness and reliability

• Strength Testing Equipment

Automatic capture of two peaks >> Peak value at click and maximum value Monitoring of limit values >> Detection of pass/fail for both peak values Calibration of torque tools compliant with ISO6789 >> For manual drivers and torque wrenches TTT_Certify software included as standard (compliant with ISO6789 requirements)

• Strength Testing Equipment

Used in over 100 binding facilities worldwide <Convenience> Quality assurance: Records performance and proves stable quality Sales improvement: Promotes binding capabilities to customers Problem solving: Quickly and efficiently identifies existing issues Complaint measures: Identifies and prevents problems before costs arise Better purchasing decisions: Enables verification of appropriate adhesives

• Testing Equipment and Devices

1000N capacity All information is clearly displayed digitally Accuracy: Full scale deviation ±0.1% Peak value capture rate 5000Hz Digital and analog output Reverse display and backlight function Traceable certification and calibration service Load per 2 seconds, load per 3 seconds Maximum tensile load Average load over 1 to 4 seconds Data accumulation and analysis are easily possible using the included data collection software

• Other inspection equipment and devices

<Features> Compliant with BS EN 14488-2 and related standards Accuracy and reproducibility, high reliability and safety Minimization of costly downtime Consistent quality control of concrete layers Easy operability for anyone <Main Functions> Built-in 1000N load cell Durable and easy-to-clean portable design Easy replacement of needles (penetration needles) Reversed display for improved readability Live display for immediate confirmation of peak force Measurement units: N, kN, mN, lbf, kgf, gf Accuracy: ±0.1% of full scale Needle adapter and 15 penetration needles Can store up to 500 readings RS232 output compatible (for PC or SPC systems) Resolution 1:5000

• Strength Testing Equipment
• Testing Equipment and Devices

Capacity 500N Quick action lever Easy operation for an economical solution Compact & portable Robust design Used in combination with Mecmesin force gauges (BFG, CFG) Suitable for tensile and compression testing

• Strength Testing Equipment

Capacity 1kN Handwheel operation Easy operation for an economical solution Compact & portable Robust design Used in combination with Mecmesin force gauges (BFG, CFG) Suitable for tensile and compression testing

• Strength Testing Equipment

Calibration certificate compliant with UK national standards Resolution 1:5000 Overload warning function available Standard equipped with a 1.5m cable – options available upon request Sensor is easily replaceable with plug & play functionality

• Strength Testing Equipment

The optional height scale (digital display) and clear reading values can be enhanced, and by attaching the mounting legs, the stand can also be used horizontally. Capacity 1kN Robust design Compact & portable Handwheel operation Can be used in combination with Mecmesin force gauges (AFG, BFG) Suitable for tensile and compression testing

• Strength Testing Equipment

Quick-acting lever for tensile and compression testing Capacity: 500N Compact & portable Quick-acting lever Used in combination with Mecmesin force gauges (AFG, BFG) Suitable for tensile and compression testing

• Strength Testing Equipment

<Features> Capable of a wide range of material testing up to 50kN 5kN, 7.5kN: Single column, 10kN, 25kN, 50kN: Twin column User-friendly and highly versatile testing machine Four components: Test frame, force sensor (ELS), fixtures, VectorProMT software Reading accuracy of ±0.5%

• Strength Testing Equipment

Compliant with ASTM D2265 and D4950 standards. This device can measure the drop point of lubricating oil up to 400°C. Consists of grease cups (6), test tubes (6), cup supports (6), thermometer holders (6), upper and lower corks (6), support rings (6), depth gauge, and metal rods. The heater is a high-temperature specification made of an aluminum block.

• Distillation Apparatus

Two types available: 300 mm and 600 mm caliber.

• Water quality testing

Supports loads up to 30kg.

• Stirrer

Compact and sturdy benchtop model. Features a base plate with scratch-resistant treatment. Three testing modes available: destructive, non-destructive, and three test modes. Selectable constant pull speeds in 7 steps from 10 to 200 mm/min. Two models with capacities of 500N and 1000N. Robust and compact.

• Strength Testing Equipment

The FMT-W30 is very easy to use with lever operation and is ideal as a portable device when a constant pulling speed is not required or when there is no main power supply to operate a motorized tensile testing machine.

• Strength Testing Equipment

Wide torque range: 0 to 10 N.m (0 to 90 lbf.in) Multiple tests completed in seconds Report generation of test results Intuitive and user-friendly Emperor software Barcode tool identification (optional) Secure data storage for audit trails Reduction of operator fatigue and repetitive motion common with manual testers

• Strength Testing Equipment

Reference standards: BS EN ISO 8295, ASTM D1894, ISO 15359, TAPPI T 549

• Strength Testing Equipment

UK Mecmesin New Product Versatile and fully functional touch screen force gauge Full scale accuracy ±0.1% Resolution 1:50,000 Equipped with Vector OS software Max mode, First peak mode: Records key values of the test Graph mode: Displays live curves to identify important events during measurement 5MHz high-speed sampling: Accurately captures sudden break forces with data acquisition at 2,000 times per second Visual pass/fail alarm: Immediate warning to the operator Overload warning: Prevents accidental damage to the load cell Pass/fail alarm: Audible and visual alerts Statistical summary: Saves displayed values in built-in memory, allowing for statistical analysis within the gauge Expandable external memory: Capable of storing all raw data on a 32GB microSDHC card Data output (to PC, printer, etc.) Can be mounted on a test stand (sold separately) Connectable to external load cells and torque sensors: Excellent versatility 2.5N to 2.5kN: 10 models

• Strength Testing Equipment

- Suitable for continuous operation at temperatures below 1350°C. - Perfect atmosphere control for an oxygen-free environment. - Rectangular chamber design accommodates a wide range of sample sizes compared to tubular furnaces. - Supports hardening, annealing, tempering, brazing, and sintering regardless of the presence of vacuum. - Vacuum, vacuum release, gas input, and gas output are configured with four individual ports. - Capable of creating multiple atmospheric environments (combustion in air, purging with air and pulling vacuum, inflow of inert gas and sintering). - Optional mass flow controller allows for presetting of inert gas (98), enabling more accurate and responsive stable gas management. - Optional back pressure valve maintains positive pressure within the chamber. - Full configuration with mass flow controller, back pressure valve, digital vacuum gauge, and vacuum pump enables complete and precise experiments.

• Electric furnace

- Suitable for continuous operation at temperatures below 1000°C. - Perfect atmosphere control for an oxygen-free environment. - Rectangular chamber design accommodates a wide range of sample sizes compared to tubular furnaces. - Supports hardening, annealing, tempering, brazing, and sintering regardless of the presence of vacuum. - Vacuum, vacuum release, gas input, and gas output are configured with individual 4 ports. - Capable of creating multiple atmospheric environments (combustion in air, purging air and pulling vacuum, flowing in inert gas and sintering). - Optional mass flow controller allows for presetting of inert gas (98), enabling more accurate and responsive stable gas management. - Optional back pressure valve maintains positive pressure within the chamber. - Full configuration with mass flow controller, back pressure valve, digital vacuum gauge, and vacuum pump enables complete and precise experiments.

• Electric furnace

- Shape and color sorting allows for the selection of discolored or deformed items, as well as moldy or cracked beans and impurities. - Capable of sorting from green beans to roasted beans and coffee cherries. - Uses components from well-known brands such as Osram LED lighting, Nikon cameras, Toshiba CCD sensors, and Qualcomm processors. - Equipped with a decaster for easy mobility. - The touch panel uses a Huawei tablet and can be easily replaced. - In addition to small models, large models are also available. - Useful for sorting nuts, legumes, seeds, dried vegetables, plastics, and more.

• Other food machinery

Suitable for operation at commonly used temperatures below 1000°C. The bottom of the furnace moves up and down with a motor drive, protecting users from the risk of burns. The opening is at the bottom of the furnace, which provides good thermal efficiency and makes it easy to set and remove samples. Ideal for reduction, firing, sintering, painting, etc. CE certified product. Equipped with an overheating prevention device.

• Electric furnace

- The compounds in the solution are diverse, so we assume the ion species to be NaCl according to the standards and convert it to NaCl / cm². - The contamination level can be measured using the static method. - The measurement accuracy of the device is high, capable of measuring down to 0.0001 µS/cm level. - Simultaneously cleaning the parts and recycling the cleaning solution with an ion resin filter minimizes environmental pollution. - It complies with the following international standards: - Mil-P-28809 and Mil-STD-2000A (USA) - Defense Standard 10/03 (UK) - IPC-TR-583 - We offer three different cleaning tank capacities: 0.4L, 8L, and 40L. - It has a highly durable and easy-to-maintain structure.

• Other measurement, recording and measuring instruments

*Azure Aqua Quad Mini-Cell Designed to accommodate 1 to 4 precast or hand-cast gels (cassette size 10cm x 8cm) for electrophoresis. The locking side fasteners maintain a tight airtight seal, allowing for rapid, easy, and reliable electrophoresis. The unit is equipped with 7 gel bases and a casting frame, making it ideal for hand-casting your own gels. * Aqua Transfer Cell Used to transfer two mini gels onto a membrane for Western blotting experiments (wet transfer). The transfer cassette and electrode core are color-coded for directional consideration, allowing for easy and direct transfer. High-speed transfers can be performed in 4 hours, or low-voltage transfers can be done overnight. *Power Supply The system is equipped with 4 power connections for conducting multiple experiments simultaneously, allowing for control of constant power, current, or voltage.

• Separation device

* Reliable quantification is possible for both strong and weak bands due to stable fluorescent signals. * Multiple proteins can be measured in a single blot, allowing for more results from each sample. * Speed and sensitivity with four times the dynamic range of traditional film. * Scanning and storage phosphor for autoradiography without the use of film. * Wide dynamic range for high-sensitivity detection. * User-friendly control software.

• Spectroscopic Analysis Equipment

* Independent optical microplate reader * Equipped with a user-friendly touch screen interface with a large 7" display * Preset and custom protocols * Single and dual wavelength detection modes * 8-position filter wheel (5 standard filters: 405, 450, 492, 595, 630 nm + 3 optional filters: 340–752 nm) * Built-in speed-selectable mixer * Electric door for easy sample loading

• Spectroscopic Analysis Equipment