ジャパンセンサー List of Products and Services

The Capella C3 series two-color thermometer is less affected by emissivity and can accurately measure temperature even when the view is obstructed by smoke or dirt on the viewport. ■ Applications - Measuring furnace temperature through dirty windows - Temperature measurement in the steel industry with high levels of smoke and water. ■ Key Features - Switchable between two-color mode and single-color mode - Can switch between direct viewfinder or green laser targeting. The temperature can be displayed directly in the viewfinder, allowing you to check the temperature reading while visually monitoring the work situation. - Achieves a fast response time of less than 1 msec - The movable focus can be adjusted continuously from a measurement distance of 400mm to 10m. - Minimum spot diameter of φ1.2mm. An optional close-up lens for short-distance measurements can achieve a spot diameter of φ0.4mm. ■ Other - Equipped with a camera tripod screw hole at the bottom of the grip for fixed-point observation. - Comes with "SensorTool Software" for managing temperature data. - Includes a dedicated carrying case for convenient transport and storage. - Robust cast aluminum housing with shock-absorbing rubber bumpers. ★ Please apply for a free demo unit using the link below.

• Radiation thermometer
• Other temperature and humidity measuring instruments
• Temperature and humidity measuring instruments

The Metis series is less affected by emissivity and can accurately measure temperature even when the view is obstructed by smoke or viewport dirt. ■Features of the Metis Series - Two-color calculation can be performed with just 2% infrared energy - Temperature measurement possible from 250°C - High-speed response (1msec or 80μsec) & small spot diameter (minimum φ0.8mm) achieved ■Applications - Temperature measurement inside furnaces through dirty windows - Temperature measurement in the steel industry with large amounts of steam and smoke - Temperature measurement of fine wires in the wire drawing process ■High-performance Software (Included) - Simultaneous measurement and graphing in "two-color thermometer mode" and "single-color thermometer mode" - Can also measure radiation signal intensity, allowing for a simple measurement of the workpiece's emissivity ★ We are currently running a free demo unit loan campaign. Please take this opportunity to try it out!

• Radiation thermometer
• Other temperature and humidity measuring instruments
• Temperature and humidity measuring instruments

The PyroMini series of radiation thermometers can be used in high-temperature environments up to 180°C without a cooling jacket. (Manufactured by Calex Electronics) There are numerous implementation records in various applications such as paper, resin, food, and painting. 【Features】 - Equipped with a compact sensor head that can be used at a maximum ambient temperature of 180°C. - Features a touch screen interface! It allows for temperature display and various settings, and in graph display mode, it can also show temperature history. - Alarms can be set, and when in alarm mode, the screen color changes to red, allowing for immediate identification of abnormalities. - Utilizes a micro SD card, enabling data logging and viewing with the display setting device alone. - The compact sensor head is made of SUS316, achieving a protection rating of IP65, making it usable in harsh environments. * A version without a touch screen is also available. ★ Please apply for a free demo unit using the link below.

• Radiation thermometer

The Ex-Temp series is the only domestically certified intrinsically safe explosion-proof type radiation thermometer in Japan (manufactured by Calex Electronics). It can be installed in atmospheres where flammable substances such as solvents are present, such as chemical plants and resin factories. There are numerous implementation records with major companies in plastic manufacturing lines, tape production, high-performance film and paint production, and paint application processes. 【Features】 ■ Sensor heads can be installed in hazardous gas atmospheres, Zones 0, 1, and 2. ■ It has obtained intrinsic safety explosion-proof certification numbers from JPEx, ATEX, IECEx, and UKCA, allowing use in Japan, Europe, and other countries that accept IECEx international explosion-proof certification. ■ Protection rating IP65. The sensor head is made of SUS316, making it usable in harsh environments. * This product must be used in combination with the intrinsically safe explosion-proof isolation barrier (D5014S/D5014D). ★ Please apply for a free demo unit using the link below.

• Radiation thermometer

The EXM8 series is an intrinsically safe explosion-proof infrared thermometer that can be used in high-temperature environments up to 180°C without a cooling jacket. (Manufactured by Calex Electronics) It has been widely adopted by major companies in drying ovens for high-performance films and ceramic sheets. 【Features】 ■ Sensor heads can be installed in hazardous gas atmospheres in Zone 0, and amplifier units in Zone 1. ■ It has obtained intrinsic safety explosion-proof certification numbers from JPEx, ATEX, IECEx, and UKCA, allowing for use in countries worldwide that accept IECEx international explosion-proof certification, including Japan and Europe. ■ It features a compact sensor head that can be used at ambient temperatures up to 180°C. ■ Protection rating IP65. The sensor head is made of SUS316, making it suitable for harsh environments. *This product must be used in combination with the intrinsically safe explosion-proof isolation barrier (D5014S/D5014D). ★ Please apply for a free demonstration unit using the link below.

• Radiation thermometer

Despite being a low-cost type of a general-purpose model, it is strong in metal measurement and offers excellent cost performance. *Custom orders and customization are available from just one unit! We have a diverse track record of installations with major companies such as automobile manufacturers, machinery manufacturers, and semiconductor equipment manufacturers. ●ISO9001 certified ●All products are manufactured consistently in Japan ●Test reports, calibration certificates, and traceability diagrams can be issued ■Newly adopted InSb (Indium Antimonide) sensor. Faster response time and more stability. ■Adopts a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■Constructed to IP67 standards. Can be installed even in harsh environments. ■A wide range of accessories for measurements in harsh environments. ★Please apply for a free demo unit using the link below.

• Radiation thermometer
• Thermometer
• Sensors

This is a radiation thermometer specialized for measuring the temperature of small components and fine wires. *Custom orders and customization are available starting from just one unit! It has been adopted by major manufacturers for applications such as fiber optic welding, chip multilayer ceramic capacitors, and catheter temperature measurement. ● ISO9001 certified ● All products are manufactured consistently in Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Newly adopted InSb (Indium Antimonide) sensor. Faster response time and more stable performance. ■ Equipped with a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■ Constructed to IP67 standards, making it suitable for installation in harsh environments. ■ A wide range of accessories for measurements in adverse conditions. ★ Please apply for a free demonstration unit using the link below.

• Radiation thermometer
• Thermometer
• Sensors

This model has the largest temperature range of 0°C to 1350°C for thermometers that can be measured at room temperature, and it also has a long measurement distance of 500mm, making it a highly versatile model. It is widely adopted by automotive manufacturers and machinery manufacturers. ● ISO9001 certified ● All products are manufactured consistently in Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Newly adopted InSb (Indium Antimonide) sensor. Faster response time and more stability. ■ Equipped with a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■ Features a structure equivalent to IP67. Can be installed even in harsh environmental conditions. ■ A wide range of accessories for measuring in harsh environments. ★ Please apply for a free demo unit using the link below.

• Radiation thermometer
• Thermometer
• Sensors

The TMHX-CQE radiation thermometer for use through quartz glass enables stable temperature measurement even through glass in furnaces by adopting a new wavelength that can pass through quartz glass. Two types are available depending on the wavelength and target size. *Custom orders and customization are possible from just one unit! We have a proven track record of deliveries to furnace manufacturers and others. ● ISO9001 certified ● All products are manufactured consistently within Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Newly adopted InSb (indium antimonide) sensor. Faster response time and more stable performance. ■ Equipped with a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■ IP67 equivalent structure adopted. Can be installed even in harsh environmental conditions. ■ A wide range of accessories for measurements in harsh environments is available. ★ Please apply for a free loan of a demo unit from the link below.

• Glass
• Radiation thermometer
• Thermometer

This is a radiation thermometer developed by Japan Sensor, which has a history of 48 years in the industry, specifically for mirror surface measurement. Two models are available depending on the measurement distance and target size. *Custom orders and modifications are possible from just one unit! We have a proven track record in temperature measurement for mirror rollers and low-temperature aluminum for many major companies. ●ISO 9001 certified ●All products are manufactured consistently in Japan ●Test reports, calibration certificates, and traceability diagrams can be issued ■Newly adopted InSb (Indium Antimonide) sensor. Faster response time and more stability. ■Adopts a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■Constructed to IP67 standards. Can be installed even in harsh environments. ■A wide range of accessories for measuring in harsh conditions. ★Please apply for a free demo unit using the link below.

• Radiation thermometer
• Thermometer
• Temperature and humidity measuring instruments

Japan Sensor, with a history of 48 years, proudly presents a super high-spec model that achieves a response speed of 0.1 msec (100 μsec) from 0°C. *Custom orders and modifications are possible even for a single unit! Leveraging the ultra-fast response feature of 0.1 msec from room temperature, we have a proven track record in various universities and research institutions, as well as in detecting the presence or absence of hot melt coatings, detecting heat seal defects, and for integration into packaging machines for food and other products. ● ISO9001 certified ● All products are manufactured consistently within Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Newly adopted InSb (Indium Antimonide) sensors. Faster response speed and more stability. ■ Equipped with a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■ Designed to IP67 standards. Can be installed even in harsh environments. ■ A wide range of accessories for measurements in difficult environments. ★ Please apply for a free demo unit using the link below.

• Radiation thermometer
• Thermometer
• Temperature and humidity measuring instruments

Japan Sensor, with a history of 48 years, proudly presents a high-performance model that can measure from 0°C with a response speed of 1 msec. *Custom orders and modifications are available from just one unit! Leveraging its features of room temperature and high-speed response, it has numerous achievements in detecting the presence or absence of hot melt application, detecting heat seal defects, and for integration into packaging machines for food and other products. ● ISO9001 certified ● All products are manufactured consistently in Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Newly adopted InSb (Indium Antimonide) sensor. Faster response speed and more stable performance. ■ Equipped with a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■ Features an IP67 equivalent structure. Can be installed even in harsh environments. ■ A wide range of accessories for measuring in adverse conditions is available. ★ Please apply for a free demo unit using the link below.

• Radiation thermometer
• Thermometer
• Temperature and humidity measuring instruments

By setting the measurement wavelength to 3.9μm, which avoids the absorption wavelength band of flames, we have minimized the influence of flames and achieved stable temperature measurements. *Custom orders and modifications are available even for a single unit. Ideal for burner brazing and metal bending processing with burners. There are case studies of implementation in burner brazing themes for heat exchangers at major air conditioning manufacturers. ● ISO9001 certified ● All products are consistently manufactured in Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Newly adopted InSb (Indium Antimonide) sensor. Faster response time and more stability. ■ Equipped with a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■ Adopts a structure equivalent to IP67. Can be installed even in harsh environments. ■ A wide range of accessories for measurements in harsh environments. ★ Please apply for a free demo unit using the link below.

• Radiation thermometer
• Thermometer
• Temperature and humidity measuring instruments

The lamp heating radiation thermometer TMHX-CPE does not use near-infrared wavelengths of approximately 0.7 to 2.5 μm, making it less susceptible to the influence of lamp light. Furthermore, by adopting shorter wavelengths in the mid-infrared range of 5.0 to 6.8 μm, it can stably measure even workpieces with poor emissivity. It is also effective for heater heating. *Custom orders and modifications are possible from just one unit! There are proven applications in soldering with metal heating and lamp heating at major automobile manufacturers, as well as in semiconductor manufacturers. ● ISO9001 certified ● All products are manufactured consistently in Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Newly adopted InSb (indium antimonide) sensor. Faster response time and more stable performance. ■ Equipped with a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■ Features an IP67 equivalent structure. Can be installed even in harsh environmental conditions. ■ A wide range of accessories for measuring in adverse environments. ★ Please apply for a free demo unit using the link below.

• Radiation thermometer
• Thermometer
• Sensors

The TMHX-CFE radiation thermometer for film measures at a wavelength of 3.4μm, which corresponds to the absorption wavelength range of polyolefin-based films, enabling high-precision temperature measurements even for thin films. *Custom orders and modifications are available starting from just one unit! We have a proven track record in the production of separator films for lithium-ion batteries. ●ISO9001 certified ●All products are manufactured consistently within Japan ●Test reports, calibration certificates, and traceability diagrams can be issued ■Newly adopted InSb (Indium Antimonide) sensor. Faster response time and more stable performance. ■Adopts a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■Constructed to IP67 standards. Can be installed in harsh environments. ■A wide range of accessories for measurements in adverse conditions. ★Please apply for a free demo unit using the link below.

• Radiation thermometer
• Thermometer
• Engineering Plastics

The TMHX-CGE glass radiation thermometer enables stable temperature measurement without transmission even with ultra-thin glass by measuring the absorption wavelength band of glass. *Custom orders and modifications are available starting from one unit! There are case studies of implementation with glass manufacturers, bottle manufacturers, lamp manufacturers, and others. ● ISO9001 certified ● All products are consistently manufactured in Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Newly adopted InSb (indium antimonide) sensor. Faster response time and more stable performance. ■ Equipped with a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■ Designed to IP67 standards. Can be installed even in harsh environments. ■ A wide range of accessories for measurements in harsh environments. ★ Please apply for a free demo unit from the link below.

• Glass
• Radiation thermometer
• Thermometer

This is a new generation series of radiation thermometers that can be used according to various fields and applications, starting with low-cost types and including high-function versions for high-speed response, small points, long distances, as well as applications for glass measurement and film measurement, and heating types such as lamp heating and burners. They have been widely adopted by automobile manufacturers and semiconductor manufacturers. ● ISO9001 certified ● All products are manufactured consistently in Japan ● Test reports, calibration certificates, and traceability system diagrams can be issued ■ Newly adopted InSb (Indium Antimonide) sensor. Faster response speed and more stable performance. ■ Equipped with a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■ Features a structure equivalent to IP67. Can be installed even in harsh environments. ■ A wide range of accessories for measuring in harsh environments. ★ Please apply for a free demo unit from the link below.

• Radiation thermometer
• Thermometer
• Sensors

Introducing the TSS-5X-3 emissivity measurement device developed by Japan Sensor, a manufacturer specializing in infrared measuring instruments for over 40 years. Using two types of reference plates (emissivity 0.06 and 0.97) as a standard, it allows for easy and instantaneous measurement of the object without heating it, maintaining it at room temperature. It is widely used in various fields, from research and development to mass production lines, including space, semiconductors, and nuclear power. 【Features】 ■ Simple measurement of emissivity at room temperature ■ Material design focused on heat dissipation and insulation ■ Quantification of subtle differences in surface treatment of materials ■ Applicable from research laboratories to mass production lines in space, semiconductors, and nuclear power ■ Power supply is AC240V, ensuring safety for overseas use *For more details, please refer to the PDF document or feel free to contact us.

• Radiation thermometer
• Other temperature and humidity measuring instruments
• others

The BBZ5 series small blackbody furnace developed by Japan Sensor, a manufacturer specializing in infrared measurement instruments with over 40 years of experience, features a very fast and stable heating time compared to conventional products, and is a compact and lightweight blackbody furnace for calibrating radiation thermometers. With a dual-cone design that has minimal wavelength dependence, it can be used in both tabletop and handheld modes. An alarm sounds when the set value reaches the stable region of the blackbody furnace, preventing wasted time during subsequent operations. It has a built-in timer for powering ON and OFF, and includes a battery to ensure that the cooling fan continues to operate even during power outages when the blackbody furnace is at high temperatures. 【Features】 - Usable without regard to the measurement wavelength of the radiation thermometer being calibrated - Improved setting operability - Shortened heating time contributes to reduced working time and energy savings - Built-in battery keeps the cooling fan running during sudden power interruptions - Temperature ranges can be selected as needed *For more details, please refer to the PDF document or feel free to contact us.

• Radiation thermometer
• Other temperature and humidity measuring instruments
• others

The LTH1 series linear sensor radiation thermometer is a radiometric thermometer that can simultaneously measure multiple points along a straight line. It can measure at a maximum speed of 1 kHz, allowing for measurements of moving objects without missing them! It is possible to distribute 46 sensors across up to 8 sectors, and since it can output analog signals for each sector, it can be freely utilized on production lines. Additionally, by using the dedicated PC software LTMS, it is possible to process and display temperature data as images, similar to thermography. *Custom orders and modifications are available even for just one unit! Please feel free to contact us. We have numerous achievements in measuring the temperatures of randomly flowing workpieces on conveyors, temperature distributions of various workpieces such as steel plates and films, and sealing temperatures of bag-shaped packages for food products. 【Features】 ■ Simultaneous measurement of multiple points along a straight line ■ High-speed scanning at a maximum of 1 kHz ■ Relatively inexpensive compared to thermography ■ Outputs analog signals for 8 points, making it usable for controlling production equipment ■ Measurement through windows is also possible ■ The included PC software can save all pixel sampling data ■ Continuous measurement of upper limits, lower limits, average values, etc. ★ Please apply for a free demo unit using the link below.

• Radiation thermometer
• Thermometer
• Temperature and humidity measuring instruments

This model allows for the measurement of metals, which have traditionally been difficult to measure, starting from 50°C, and it also supports high-speed response (0.001 seconds). Furthermore, it uses wavelengths that can pass through quartz glass, making it adept at temperature measurements through viewports. It has been adopted by major companies across a wide range of themes, including soldering, metals in vacuum chambers, mirror rollers, laser processing, and temperature measurement during induction heating. There is also a light-shielding hood (sold separately) available to ensure stable temperature measurement below 100°C. Utilizing a rich array of accessories expands the installation environment significantly. ● ISO9001 certified ● All products are manufactured consistently within Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Adopts a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured for temperature, making alignment very easy. ■ Features an IP67 equivalent structure, allowing installation even in harsh environments. ■ A wide variety of accessories are available for measurements in adverse conditions. ★ Please apply for a free demo unit through the link below.

• Radiation thermometer
• Other temperature and humidity measuring instruments
• Thermometer

Japan Sensor, a manufacturer specializing in radiation thermometers with over 40 years of experience, offers the Fiberless Radiation Thermometer FLHX series, which is a semi-custom type that can be selected from over 110 combinations according to your preferences. *Custom orders and modifications are also available starting from just one unit! Due to its ability to transmit through materials like quartz glass, it has numerous achievements in measuring through windows in vacuum layers and heating furnaces, as well as in high-frequency heating and laser welding, particularly for automotive-related companies. ● ISO9001 certified ● All products are manufactured consistently within Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Adopts a coaxial LED aiming mechanism. The area illuminated by the aiming light directly corresponds to the temperature measurement area, making alignment very easy. ■ A wide range of accessories for measuring in harsh environments. ■ Equipped with green LEDs for easy visibility and alignment even with heated workpieces. ■ Features analog output and RS232C output. ■ Ensures reliable temperature measurement with a world-class fast response time of 1mS (0.001 seconds). ■ Target sizes start from φ0.15mm. ★ Please apply for a free demonstration unit using the link below.

• Radiation thermometer
• Other temperature and humidity measuring instruments
• Temperature and humidity measuring instruments

Japan Sensor, a manufacturer specializing in radiation thermometers with over 40 years of experience, offers the FTKX series fiber-type radiation thermometers, which can be selected according to your preferences from over 140 combinations. *Custom orders and modifications are also possible from just one unit, in addition to combinations! We have numerous achievements in automotive-related companies for applications such as high-frequency heating, laser welding, resistance welding, and measurements through windows in vacuum chambers or heating furnaces. ● ISO9001 certified ● All products are manufactured consistently in Japan ● Test reports, calibration certificates, and traceability diagrams can be issued ■ Adopts a coaxial LED aiming mechanism. The area illuminated by the aiming light is the same as the area being measured, making alignment very easy. ■ Features an IP67 equivalent structure, allowing installation even in harsh environments. ■ A wide range of accessories for measurements in harsh environments. ■ Uses green LEDs, making it easy to see and align even with glowing workpieces. ■ Fiber head heat resistance temperature of 150°C ■ Equipped with analog output and RS232C output ■ Ensures accurate temperature measurement with a world-class fast response time of 1mS (0.001 seconds) ■ Target size from φ0.15mm ★ Please apply for a free demonstration unit using the link below.

• Radiation thermometer
• Other temperature and humidity measuring instruments
• Thermometer

The TMHX-TAN laser heating radiation thermometer developed by Japan Sensor, a manufacturer specializing in radiation thermometers with over 40 years of experience, is designed to minimize the influence of lasers and enable stable temperature measurements. *Custom orders are available starting from just one unit! We have numerous achievements in large companies for integration into devices such as laser soldering. ★If you wish to measure temperature along the same optical axis as the laser, we can provide know-how on infrared reflective mirrors. Please feel free to contact us. ●ISO9001 certified ●All products are manufactured consistently in Japan ●Test reports, calibration certificates, and traceability diagrams can be issued 【Features】 ■Visualize the temperature and processing status of the workpiece with coaxial measurement ■Easy alignment with coaxial LED aiming method ■Order types available to accommodate various scenes ■Equipped with both analog output and RS232C output ■Reliable temperature measurement with a world-class response speed of 0.1mS (0.0001 seconds) ■Easily confirm processing points with a CCD camera and align positions with an LED aiming pointer. ★Please apply for a free demo unit using the link below.

• Radiation thermometer
• Other temperature and humidity measuring instruments
• Temperature and humidity measuring instruments