Aggreko Japan Product Lineup

Features of Aggreko Temperature Control Equipment Rental Solutions • Total service including thermal design/planning/engineering • Frame-type and container-type equipment (easy installation, minimal civil engineering required) • Scalability through parallel connection (from tens of kW to several MW) • Support for procedures related to various regulations • Rental of peripheral components and equipment such as pumps, flexible hoses (camlock type), reducers, manifolds, generators, transformers, and distribution boards.

Product Overview Supports cooling and heating with water or water-glycol. Designed for outdoor installation, fully assembled and ready for immediate setup. Equipped with Aggreko control system: nighttime noise suppression, energy-saving mode, low noise operation.

Aggreko's air-cooled fluid chillers are designed for water or water-glycol cooling and are complete units that can be installed outdoors. They are easy to transport and install, and they accommodate a wide range of temperature control.

GT-20 Cooling Tower Overview The GT-20 is an induced draft counterflow modular cooling tower, with module dimensions that conform to the size of a 20-foot ISO container. When in use, the legs are extended to ensure air flow from the bottom. No scaffolding is required, making installation easy. Main Components Water tank, spray nozzles, PVC fill media, drift eliminator, top EC axial fan, Carel pCO5 controller. Performance Heat exchange capacity: 592 tons (2082 kW) Water flow rate: 1320 GPM (83 L/s) Inlet water temperature: 35°C Outlet water temperature: 29°C Wet bulb temperature: 26°C Operating Data Makeup water flow: approximately 15 GPM Number of nozzles: 32 Temperature range: 7 to 63°C Water flow rate range: 500 to 2000 GPM

Aggreko is a global leader in providing power supply and temperature control solutions worldwide. In Japan, we rapidly constructed a 200MW temporary power plant after the Great East Japan Earthquake and were responsible for power supply during the Tokyo 2020 Olympics. We provide reliable power and temperature management where and when needed. We cater to a wide range of sectors including events, petrochemicals, power generation, data centers, and manufacturing, with flexible contracts available from short-term to long-term. We maximize efficiency with the latest technology and live monitoring, promoting sustainability with fuel-flexible generators and environmentally friendly options. With no CAPEX required and 24/7 support, we continue to support Japan's industry and society.

The BUF2000 is a high-performance buffer tank that resolves flow adjustment and capacity shortages in cold and hot water systems. It ensures a maximum system capacity of 2,100 liters and allows for the sectioning of cold and hot water through removable baffle plates. Made of highly corrosion-resistant HDPE, it reduces the risk of corrosion and is compatible with a wide range of heat transfer media. It enhances the stability and efficiency of systems in various applications, including manufacturing sites, factories, event venues, and emergency air conditioning. Its compact design makes transportation and installation easy, providing a solution that combines reliability and flexibility.

The BUF1000 is a high-performance buffer tank designed to compensate for flow fluctuations and capacity shortages in cold and hot water systems. It ensures a maximum system capacity of 970L and allows for sectioning of cold and hot water through removable baffle plates. Made of highly corrosion-resistant HDPE, it reduces the risk of corrosion and is compatible with a wide range of heat transfer fluids. It enhances the stability and efficiency of systems in various applications such as manufacturing sites, factories, event venues, and emergency air conditioning. Its compact design makes transportation and installation easy, providing a solution that combines reliability and flexibility.

In the food manufacturing industry, the stability of the cooling process is crucial for maintaining product quality. Insufficient cooling capacity and inadequate temperature management can lead to deterioration of food quality and decreased manufacturing efficiency. BUF2000 compensates for the lack of capacity in cooling systems and stabilizes temperature, contributing to the maintenance of food quality and improvement of manufacturing efficiency. 【Usage Scenarios】 - Food processing plants - Refrigerated warehouses - Enhancement of cooling equipment 【Effects of Implementation】 - Stabilization of cooling systems - Preservation of food quality - Improvement of manufacturing efficiency

In the pharmaceutical manufacturing industry, strict temperature control during the manufacturing process is essential to maintain product quality. Particularly in the production of temperature-sensitive pharmaceuticals, temperature stability affects the efficacy and safety of the products. Inadequate temperature management can lead to product deterioration and quality degradation. BUF2000 resolves flow adjustment and capacity shortages in cold and hot water systems, enhancing the stability of temperature management in pharmaceutical manufacturing. 【Usage Scenarios】 - Pharmaceutical manufacturing plants - Research and development facilities - Quality control departments 【Benefits of Implementation】 - Improved product quality through stabilized temperature management - Increased efficiency in the manufacturing process - Compliance with regulations

In data centers, the stable operation of cooling systems is essential due to the high density of servers. Insufficient cooling capacity and unstable flow can lead to server overheating and system downtime, which may have serious impacts on business continuity. BUF2000 supports the stable operation of data centers by compensating for the cooling system's capacity shortfall and providing a stable flow. 【Usage Scenarios】 - Cooling systems in data centers - Temperature management in server rooms - Stabilization of cooling water supply 【Benefits of Implementation】 - Improved stability of cooling systems - Reduced risk of server overheating - Decreased system downtime

In the metal processing industry, particularly in the quenching process, managing the cooling temperature, which affects product quality, is crucial. Rapid temperature changes can cause metal distortion and uneven hardness, potentially leading to defective products and reduced performance. BUF2000 contributes to improving product quality by stabilizing the cooling water temperature during the quenching process and achieving uniform cooling. 【Usage Scenarios】 - Stabilization of cooling water temperature in the quenching process - Prevention of distortion in metal parts - Reduction of quenching time 【Benefits of Implementation】 - Improvement in product quality - Reduction of defective products - Increase in productivity

In the semiconductor manufacturing industry, precise temperature management is essential for improving the quality and yield of manufacturing processes. In particular, in wafer production and cleanroom environments, fluctuations in the temperature of cooling water directly affect product quality, necessitating stable cooling capabilities. Inadequate temperature management can lead to increased product defect rates and decreased manufacturing efficiency. The BUF2000 is a high-performance buffer tank that resolves flow adjustment and capacity shortages in cold and hot water systems. 【Usage Scenarios】 - Cooling water supply systems in semiconductor manufacturing plants - Air conditioning systems in cleanrooms - Cooling for precision equipment 【Benefits of Implementation】 - Stabilization of cooling water supply - Improved temperature management accuracy - Increased efficiency of manufacturing processes

In the chemical plant industry, precise temperature management of reaction processes is essential for ensuring product quality and safety. In particular, temperature control, which greatly affects reaction rates and yields, is a critical factor that influences the overall efficiency of the plant. Inadequate temperature management can lead to runaway reactions, decreased quality, and even safety risks. BUF2000 addresses flow adjustment and capacity shortages in chilled and hot water systems, contributing to the stabilization of the reaction control process. 【Application Scenarios】 - Temperature control of chemical reaction processes - Removal of reaction heat and maintenance of temperature - Supply of cooling water and temperature management 【Benefits of Implementation】 - Stabilization of reaction processes - Improvement of product quality - Enhancement of overall plant efficiency

In agricultural irrigation systems, the management of water temperature significantly affects crop growth. Particularly in large-scale irrigation systems, fluctuations in water temperature can hinder uniform growth. BUF2000 addresses flow adjustments in cold and hot water systems and resolves capacity shortages, achieving stable water temperature supply. 【Usage Scenarios】 - Irrigation systems in large farms - Temperature management in greenhouse cultivation - Nutrient solution cultivation systems 【Benefits of Implementation】 - Promotion of growth through stabilization of water temperature - Improvement of overall system efficiency - Enhancement of crop quality

In the brewing industry, temperature management during the fermentation process is a crucial factor that affects product quality and production efficiency. In particular, temperature changes influence yeast activity, significantly impacting the progress of fermentation and the final flavor of the product. Inadequate temperature management can lead to fermentation stagnation or the risk of undesirable components being produced. BUF2000 optimizes temperature management in the fermentation process, enabling stable quality and efficient production. 【Usage Scenarios】 - Breweries for beer, sake, wine, etc. - Temperature management of fermentation tanks - Capacity reinforcement for cooling and heating systems 【Benefits of Implementation】 - Stabilization of the fermentation process - Improvement in product quality - Enhancement of production efficiency

In the seafood processing industry, rapid and uniform freezing is required to maintain freshness. Especially when handling large quantities of seafood, a lack of freezing capacity or temperature inconsistencies can lead to quality deterioration and reduced yield. The BUF2000 addresses flow regulation and capacity shortages in cold and hot water systems, contributing to the stabilization of the freezing process. 【Usage Scenarios】 - Cold water supply to rapid freezing storage - Pre-cooling process before freezing - Processing stages where temperature management is crucial 【Benefits of Implementation】 - Reduced freezing time - Improved product quality - Enhanced yield

In the aerospace industry, testing requires precise temperature control for product performance evaluation. Particularly when verifying the reliability of aircraft components and systems, durability testing against temperature changes is essential. Inadequate temperature management can compromise the reliability of test results and lead to delays in product development. Aggreko's air-cooled fluid chillers achieve precise temperature control across a wide range of -12°C to +15°C, strongly supporting testing in the aerospace field. 【Application Scenarios】 * Temperature cycle testing of aircraft components * Environmental testing of space equipment * Performance evaluation of various sensors 【Benefits of Implementation】 * Improved accuracy of tests * Reduced testing time * Increased efficiency in product development

In the shipbuilding industry, high-quality welding work is required. Particularly in the welding of large structures, temperature management is crucial and affects the quality of the welds. Proper cooling is essential to suppress distortion and prevent cracking. Aggreko's air-cooled fluid chillers meet the cooling needs of welding operations and support high-quality welding. 【Usage Scenarios】 - Welding operations at shipyards - Cooling of welding equipment - Outdoor welding operations 【Benefits of Implementation】 - Improvement in welding quality - Enhancement of work efficiency - Stable operation of equipment

In the chemical industry, precise temperature control is essential for optimizing reaction rates and yields. In particular, controlling reaction heat and maintaining reactions within specific temperature ranges are crucial for ensuring product quality and safety. Inadequate temperature management can lead to runaway reactions or the generation of by-products. Aggreko's air-cooled fluid chillers accommodate a wide temperature range of -12°C to +15°C, enabling stable temperature supply in reaction control processes. 【Application Scenarios】 - Temperature control in chemical reaction processes - Removal of reaction heat - Supply to cooling jackets 【Benefits of Implementation】 - Increased efficiency and improved quality of reactions - Stabilization of processes - Enhanced safety

In the plastic molding industry, temperature management is crucial as it affects product quality. To optimize the molding cycle and reduce defects, it is necessary to accurately control the mold temperature. Inadequate temperature management can lead to molding defects and decreased dimensional accuracy. Aggreko's air-cooled fluid chillers address the challenges of temperature management in plastic molding across a wide temperature range. 【Application Scenarios】 - Injection Molding - Blow Molding - Extrusion Molding - Vacuum Molding 【Benefits of Implementation】 - Shortened molding cycle - Improved product quality - Reduction of defective products - Enhanced energy efficiency

In the semiconductor industry, temperature management in the manufacturing process is a critical factor that affects product quality and yield. Particularly in processes that require precise temperature control, the stability and reliability of cooling capacity are essential. Inadequate temperature management can lead to product defects and performance degradation. Aggreko's air-cooled fluid chillers are designed for water or water-glycol cooling, achieving precise temperature control across a wide range of -12°C to +15°C. They can be installed outdoors and meet the cooling needs of semiconductor manufacturing processes. 【Usage Scenarios】 - Cooling for semiconductor manufacturing plants - Temperature management in clean rooms - Cooling for manufacturing equipment 【Benefits of Implementation】 - Improved product quality through stable temperature management - Increased efficiency in the manufacturing process - Cost optimization through flexible rental options

In data centers, stable cooling capacity is essential due to the high density of servers. Overheating of servers can lead to system downtime and data loss. Aggreko's air-cooled fluid chillers can be installed outdoors and support a wide range of temperature control, ensuring the stable operation of data centers. 【Usage Scenarios】 - Cooling servers in data centers - Backup for existing equipment - Temporary enhancement of cooling capacity 【Benefits of Implementation】 - Stable operation of servers - Reduction of system downtime - Flexible enhancement of cooling capacity

In the pharmaceutical industry, strict temperature control during the manufacturing process is essential to maintain the quality of pharmaceuticals. Accurate temperature management is particularly important in the storage of raw materials and products sensitive to temperature changes, as well as in controlling reaction processes, to ensure the stability and efficacy of the products. Inadequate temperature management can lead to product degradation and a decline in quality. Aggreko's air-cooled fluid chillers achieve precise temperature control across a wide range of -12°C to +15°C, optimizing pharmaceutical processes. 【Usage Scenarios】 - Pharmaceutical manufacturing plants - Research and development facilities - Raw material storage - Quality control departments 【Benefits of Implementation】 - Improved product quality and safety - Increased efficiency in manufacturing processes - Compliance with regulations

In the metal processing industry, proper cooling is essential to suppress heat generation during grinding processes, extend machining accuracy, and prolong tool life. Particularly in situations where high precision machining is required, the stability of the cooling water temperature becomes crucial. Inadequate cooling can lead to machining defects and premature tool wear. Aggreko's air-cooled fluid chiller provides an optimal cooling environment for grinding processes due to its wide temperature control range and high cooling capacity. 【Usage Scenarios】 - Metal grinding processing - Cooling of machine tools - Cooling water supply within factories 【Benefits of Implementation】 - Improved machining accuracy - Extended tool life - Increased productivity

In the automotive industry’s welding process, high-quality finishes and high productivity are required. In particular, the cooling of welds is essential for suppressing distortion and ensuring strength. If proper cooling is not performed, it may lead to welding defects and a decline in product quality. Aggreko's air-cooled fluid chillers provide optimal temperature management for welding cooling, contributing to quality improvement and increased productivity. [Application Scenarios] - Automotive body welding - Parts welding - Robot welding [Effects of Implementation] - Improved quality of welds - Increased productivity - Stable operation of the cooling system

In the food processing industry, cooling storage is essential for maintaining product quality. In particular, temperature management is a crucial factor that affects the freshness and safety of food. Inadequate temperature management can lead to food spoilage and quality deterioration, resulting in significant losses. Aggreko's air-cooled fluid chillers address the challenges of cooling storage in food processing. Designed for water or water-glycol cooling, they are complete units that can be installed outdoors. They are easy to transport and install, and they accommodate a wide range of temperature control. 【Usage Scenarios】 * Refrigerated and frozen storage in food factories * Cooling processes for processed foods * Temperature management in food warehouses 【Benefits of Implementation】 * Preservation of food quality * Optimization of temperature management * Strengthening of business continuity planning (BCP)

In the medical industry, especially in facilities that operate MRI (Magnetic Resonance Imaging) machines, stable operation of the equipment is essential. MRI requires precise temperature control, and any malfunction in the cooling system can lead to decreased diagnostic accuracy or equipment shutdown. Our air-cooled fluid chiller provides stable temperature control to meet the cooling needs of MRI. 【Usage Scenarios】 - MRI rooms - Cooling for medical imaging devices - Backup cooling systems 【Benefits of Implementation】 - Stable operation of MRI - Maintenance of diagnostic accuracy - Prolonged equipment lifespan

In the printing industry, temperature management during the ink drying process is a crucial factor that affects print quality. Insufficient drying of the ink can lead to smudging and rubbing, resulting in a decline in product quality. On the other hand, excessive drying can cause the ink to crack. Aggreko's air-cooled fluid chiller is designed for water or water-glycol cooling, precisely controlling the temperature during the ink drying process and providing an optimal drying environment. It is a complete unit that can be installed outdoors, making transportation and installation easy, and it accommodates a wide range of temperature control. 【Application Scenarios】 * Offset printing * Gravure printing * Screen printing * Inkjet printing * UV curing ink drying 【Benefits of Implementation】 * Improved print quality * Optimization of ink drying time * Increased productivity * Enhanced energy efficiency

In the food processing industry, temperature management is crucial for maintaining product quality. In particular, cooling during the manufacturing process is essential to prevent food spoilage and quality deterioration, ensuring safety. A lack of adequate cooling capacity can lead to a decline in product quality and waste, resulting in significant losses. Our container-type cooling towers provide the cooling performance required in food processing settings, contributing to the preservation of product quality. 【Usage Scenarios】 - Cooling processes in food processing factories - Temperature management in refrigerated and frozen warehouses - Cooling in manufacturing lines 【Benefits of Implementation】 - Preservation of product quality - Improved yield - Reduction of food waste

In the semiconductor industry, temperature management in the manufacturing process is a crucial factor that influences product quality and yield. Particularly, as density increases, there is a demand for precise cooling capabilities that can handle the rise in heat generation. Insufficient cooling capacity can lead to equipment malfunctions and product defects. Our container-type cooling towers are housed in ISO standard 20ft containers, allowing for flexible installation locations and rapid deployment. With powerful cooling performance, they meet the precise cooling needs in semiconductor manufacturing. 【Usage Scenarios】 - Semiconductor manufacturing plants - Clean rooms - Data centers 【Benefits of Implementation】 - Improved yield through stable temperature management - Early business commencement due to quick installation - Cost reduction through space-saving design

In the pharmaceutical industry, strict temperature control during the manufacturing process is essential to maintain the quality of pharmaceuticals. In particular, temperature fluctuations can lead to the degradation of active ingredients and deterioration of quality, so stable cooling capacity is required. Our container-type cooling tower is housed in an ISO standard 20ft container, making it easy to install and meeting the temperature management needs of pharmaceutical factories. 【Usage Scenarios】 - Cooling in the pharmaceutical manufacturing process - Temperature management in research and development facilities - Temperature adjustment in quality control departments 【Benefits of Implementation】 - Maintenance of pharmaceutical quality - Stabilization of the manufacturing process - Space-saving and easy installation

In the shipbuilding industry, proper cooling is essential for achieving high-quality welding in the welding process. Overheating of the weld area can lead to warping and a decrease in strength, potentially compromising the quality of the product. Additionally, insufficient cooling can result in reduced work efficiency. Our container-type cooling tower is housed in a 20-foot ISO standard container, making it easy to install on-site at shipyards. This allows for a rapid response to cooling needs in the welding process and supports high-quality welding operations. 【Usage Scenarios】 - Welding areas at shipyards - Cooling of welding equipment - Improvement of quality control 【Effects of Implementation】 - Improvement in welding quality - Enhancement of work efficiency - Cost reduction

In the plastic molding industry, proper temperature management of molds is essential to balance product quality and production efficiency. Insufficient temperature management of molds can lead to molding defects and decreased productivity. The GT-20 is a cooling tower housed in a 20-foot ISO standard container, designed to meet the cooling needs in plastic molding. It offers high cooling performance while being compact, reducing installation space constraints. 【Usage Scenarios】 - Plastic molding factories - Injection molding, blow molding, extrusion molding, etc. - Stabilization of cooling water temperature 【Benefits of Implementation】 - Shortened molding cycles - Improved product quality - Space-saving - Easy installation and mobility

In the automotive painting industry, temperature management within the painting booth is crucial for maintaining paint quality. In particular, temperature fluctuations can affect the drying speed of the paint and the final finish, potentially leading to variations in quality and the occurrence of defective products. Container-type cooling towers help maintain a constant temperature in the painting booth, contributing to the stabilization of paint quality. 【Usage Scenarios】 - Automotive painting booths - Painting lines - Air conditioning within factories 【Benefits of Implementation】 - Improvement in paint quality - Reduction of defective products - Increase in productivity