Aggreko Japan Product Lineup

Aggreko's next-generation gas generator is a mobile, modular power solution that supports multiple gas fuels, including natural gas, LPG, and oil-related gases. Equipped with a high-efficiency gas engine, it achieves excellent performance with an electrical efficiency of 42%, balancing reduced power generation costs with stable electricity supply. Despite its compact container design of approximately 6.1m, it delivers high output and allows for quick installation and flexible expansion or reduction. It is ideal for areas with underdeveloped grid power, as a bridge power source until transmission begins, and for long-term baseload applications. With a clean design that considers exhaust gas regulations and a 24/7 turnkey service, it reliably provides power where needed.

• Generators and transmission motors

Aggreko's next-generation gas generator is a mobile power solution that supports multiple gas fuels, including natural gas, LPG, and oil-related gases. It achieves a high output of 1560 kW (50Hz) in a modular container of approximately 6.1m, contributing to a reduction in power generation costs with an excellent fuel efficiency of 42%.

• Generators and transmission motors

In the automotive painting industry, temperature management within the painting booth is crucial for maintaining paint quality. In particular, temperature fluctuations can affect the drying speed of the paint and the final finish, potentially leading to variations in quality and the occurrence of defective products. Container-type cooling towers help maintain a constant temperature in the painting booth, contributing to the stabilization of paint quality. 【Usage Scenarios】 - Automotive painting booths - Painting lines - Air conditioning within factories 【Benefits of Implementation】 - Improvement in paint quality - Reduction of defective products - Increase in productivity

• Chiller

In the plastic molding industry, proper temperature management of molds is essential to balance product quality and production efficiency. Insufficient temperature management of molds can lead to molding defects and decreased productivity. The GT-20 is a cooling tower housed in a 20-foot ISO standard container, designed to meet the cooling needs in plastic molding. It offers high cooling performance while being compact, reducing installation space constraints. 【Usage Scenarios】 - Plastic molding factories - Injection molding, blow molding, extrusion molding, etc. - Stabilization of cooling water temperature 【Benefits of Implementation】 - Shortened molding cycles - Improved product quality - Space-saving - Easy installation and mobility

• Chiller

In the shipbuilding industry, proper cooling is essential for achieving high-quality welding in the welding process. Overheating of the weld area can lead to warping and a decrease in strength, potentially compromising the quality of the product. Additionally, insufficient cooling can result in reduced work efficiency. Our container-type cooling tower is housed in a 20-foot ISO standard container, making it easy to install on-site at shipyards. This allows for a rapid response to cooling needs in the welding process and supports high-quality welding operations. 【Usage Scenarios】 - Welding areas at shipyards - Cooling of welding equipment - Improvement of quality control 【Effects of Implementation】 - Improvement in welding quality - Enhancement of work efficiency - Cost reduction

• Chiller

In the pharmaceutical industry, strict temperature control during the manufacturing process is essential to maintain the quality of pharmaceuticals. In particular, temperature fluctuations can lead to the degradation of active ingredients and deterioration of quality, so stable cooling capacity is required. Our container-type cooling tower is housed in an ISO standard 20ft container, making it easy to install and meeting the temperature management needs of pharmaceutical factories. 【Usage Scenarios】 - Cooling in the pharmaceutical manufacturing process - Temperature management in research and development facilities - Temperature adjustment in quality control departments 【Benefits of Implementation】 - Maintenance of pharmaceutical quality - Stabilization of the manufacturing process - Space-saving and easy installation

• Chiller

In the semiconductor industry, temperature management in the manufacturing process is a crucial factor that influences product quality and yield. Particularly, as density increases, there is a demand for precise cooling capabilities that can handle the rise in heat generation. Insufficient cooling capacity can lead to equipment malfunctions and product defects. Our container-type cooling towers are housed in ISO standard 20ft containers, allowing for flexible installation locations and rapid deployment. With powerful cooling performance, they meet the precise cooling needs in semiconductor manufacturing. 【Usage Scenarios】 - Semiconductor manufacturing plants - Clean rooms - Data centers 【Benefits of Implementation】 - Improved yield through stable temperature management - Early business commencement due to quick installation - Cost reduction through space-saving design

• Chiller

In the food processing industry, temperature management is crucial for maintaining product quality. In particular, cooling during the manufacturing process is essential to prevent food spoilage and quality deterioration, ensuring safety. A lack of adequate cooling capacity can lead to a decline in product quality and waste, resulting in significant losses. Our container-type cooling towers provide the cooling performance required in food processing settings, contributing to the preservation of product quality. 【Usage Scenarios】 - Cooling processes in food processing factories - Temperature management in refrigerated and frozen warehouses - Cooling in manufacturing lines 【Benefits of Implementation】 - Preservation of product quality - Improved yield - Reduction of food waste

• Chiller

In the plastic molding industry, temperature management is crucial as it affects product quality. To optimize the molding cycle and reduce defects, it is necessary to accurately control the mold temperature. Inadequate temperature management can lead to molding defects and decreased dimensional accuracy. Aggreko's air-cooled fluid chillers address the challenges of temperature management in plastic molding across a wide temperature range. 【Application Scenarios】 - Injection Molding - Blow Molding - Extrusion Molding - Vacuum Molding 【Benefits of Implementation】 - Shortened molding cycle - Improved product quality - Reduction of defective products - Enhanced energy efficiency

• Chiller

In the event industry, stable large-scale power supply is a crucial factor that influences the success of an event. Particularly for outdoor events and temporary venues, a stable power supply is essential. Power shortages can lead to malfunctions of equipment such as sound, lighting, and video, potentially causing interruptions or, in the worst case, cancellations of the event. Our 1000kVA container-type generator provides the necessary power when needed, supporting the smooth operation of events. 【Usage Scenarios】 - Large-scale music festivals - Exhibitions - Sports events - Outdoor movie screenings - Local festivals 【Benefits of Implementation】 - Stabilization of power supply during events - Backup power supply in case of unexpected power outages - Flexible power supply tailored to the scale of the event - Reduction of power-related concerns for event organizers

• power supply

In the telecommunications industry, stable operation 24 hours a day, 365 days a year is essential. Power outages can lead to the suspension of communication services, which can have significant social impacts, making the provision of emergency power sources a critical issue. A 1000kVA container-type generator can quickly supply power in the event of a power outage, supporting the continuity of communication services. 【Usage Scenarios】 - Emergency power supply for base stations - Backup power for communication equipment - Maintenance of communication infrastructure during disasters 【Benefits of Implementation】 - Continuation of communication services during power outages - Strengthening of BCP (Business Continuity Planning) - Providing peace of mind through reliable power supply

• power supply

In the construction industry, a stable power supply at the site is essential. Power is used for various purposes, such as heavy machinery, lighting, and office power, and power outages can lead to work interruptions and delays. Especially in large-scale construction projects like high-rise buildings and infrastructure development in urban areas, securing a reliable power source is crucial for the success of the project. Our 1000kVA container-type generator provides the necessary power when needed, supporting business continuity at construction sites. 【Usage Scenarios】 - Power supply to heavy machinery at construction sites - Power supply to temporary offices - Power supply during events 【Benefits of Implementation】 - Improved work efficiency due to stable power supply - Reduced risk of power outages - Strengthened business continuity planning (BCP)

• power supply

In the mining industry, a stable power supply is essential across various processes such as excavation, beneficiation, and transportation. Power outages can lead to production interruptions, equipment damage, and decreased safety, potentially resulting in significant losses. A 1000kVA container-type generator provides the necessary power when needed, supporting business continuity at mining sites. 【Usage Scenarios】 - Power supply for major equipment in mines - Use as an emergency power source - Utilization as a temporary power supply 【Benefits of Implementation】 - Maintenance of productivity through stable power supply - Reduction of power outage risks - Flexible response through rapid installation

• power supply

In the manufacturing industry, a halt in the production line leads to significant losses. Especially in factories that operate 24 hours a day or in environments where continuous production is required, power outages must be avoided to prevent production stoppages. Our 1000kVA container-type generator ensures a stable power supply even in the event of a power outage, preventing the halt of the production line. 【Usage Scenarios】 - Factories - Manufacturing sites - Production lines 【Benefits of Implementation】 - Continuation of production during power outages - Strengthening of business continuity plans (BCP) - Maintenance of productivity

• power supply

In the oil and gas drilling industry, the stability of power supply at the site is key to business continuity. Particularly, drilling operations are often conducted around the clock, and power outages can lead to significant losses. In harsh working environments, securing a reliable power source is essential. Our 1000kVA container-type generator meets the needs of drilling sites and ensures a stable power supply. 【Usage Scenarios】 - Power supply at drilling sites - Power supply on platforms - Use as an emergency power source 【Benefits of Implementation】 - Business continuity through stable power supply - Immediate response through quick installation - High durability in harsh environments

• power supply

In the port cargo handling environment, power outages can lead to work interruptions, delays in cargo, and economic losses. Especially for cargo handling equipment that requires high power, such as cranes and conveyors, a stable power supply is essential. Our 1000kVA container-type generator quickly provides power in the event of a power outage, supporting the continuation of cargo handling operations. 【Usage Scenarios】 - Container terminals - Warehouses - Cargo handling sites 【Benefits of Implementation】 - Business continuity during power outages - Prevention of delays in cargo transport - Minimization of economic losses

• power supply

In a data center, stable operation 24/7 is essential, and power outages can lead to service interruptions and potential damage to customers. Ensuring a reliable power supply as a backup power source is crucial. A 1000kVA container-type generator provides power to critical systems in the data center even during unexpected power outages, supporting business continuity. 【Use Cases】 - Backup power for data centers - Emergency power supply 【Benefits of Implementation】 - Reduces the risk of system downtime during power outages - Strengthens business continuity planning (BCP) - Enhances reliability from customers

• power supply

In the manufacturing industry, a halt in the production line can lead to significant losses. Power outages and unstable electricity supply can cause delays in production schedules, deterioration in product quality, and even loss of customer trust. This is especially true for factories that operate 24 hours a day or handle precision equipment, where a stable power supply is essential. Aggreko's battery-equipped hybrid generators serve as backup power during outages and contribute to peak shaving of electricity demand, supporting the continuity of production lines. 【Usage Scenarios】 - Backup power during outages - Power supply during peak electricity demand - Integration with renewable energy - Power supply for events and exhibitions 【Benefits of Implementation】 - Reduced risk of production line halts - Savings on fuel and electricity costs - Reduced environmental impact - Strengthened BCP (Business Continuity Plan)

• Power storage device

In the film industry, securing power at shooting locations can be a challenge. This is especially true when filming in natural settings or areas far from urban centers, where it can be difficult to obtain power. Additionally, stable power supply and low noise levels are required to avoid interfering with the delicate operation of filming equipment. Aggreko's battery-equipped hybrid generators work in conjunction with diesel generators to reduce generator operating time and significantly decrease fuel consumption, emissions, and noise. This helps to solve power-related challenges in film production, supports smooth shooting, and reduces environmental impact. 【Usage Scenarios】 - Power supply at filming locations - Nighttime and early morning shoots - Power supply for sound equipment - Power supply for lighting equipment 【Benefits of Implementation】 - Reduced fuel costs - Lower environmental impact - Smooth filming progress - Noise reduction for nearby areas

• Power storage device

Power supply in remote areas of the mining industry requires a balance between stable operations and environmental impact reduction. In particular, ease of mobility, stable fuel supply, and noise control are important at resource development and mining sites. Traditional diesel generators have faced challenges such as fuel transportation costs, noise issues, and environmental impact from exhaust emissions. Aggreko's battery-equipped hybrid generators work in conjunction with diesel generators to reduce fuel consumption, emissions, and noise by shortening generator operating hours. Additionally, the plug-and-play design allows for rapid deployment, addressing challenges in power supply in remote areas. 【Usage Scenarios】 - Power supply for remote mines - Power source at resource development sites - Temporary power supply at mining sites 【Benefits of Implementation】 - Reduction in fuel costs - Decrease in environmental impact due to reduced exhaust emissions - Improvement in working environment through noise reduction - Enhanced operational efficiency through rapid deployment

• Power storage device

In the data center industry, stable operation 24/7 is essential, and power outages can lead to significant system downtime and data loss. Backup power is crucial to avoid these risks. Aggreko's battery-equipped hybrid generators work in conjunction with diesel generators to quickly supply power during outages, supporting business continuity for data centers. 【Use Cases】 - Backup power for data centers - Power supply during outages - Emergency power 【Benefits of Implementation】 - Reduces the risk of data loss during outages - Ensures stable system operation - Strengthens BCP (Business Continuity Planning)

• Power storage device

In the event industry, consideration for the environment and ensuring the comfort of attendees are important. Especially for outdoor events and large-scale events, stable power supply and the suppression of noise and exhaust gases are required. Conventional diesel generators can pose problems with noise and exhaust emissions, and compliance with environmental regulations is also a challenge. Aggreko's hybrid generators equipped with battery storage address these issues and support the planning and operation of events. 【Usage Scenarios】 - Music festivals - Exhibitions - Sports events - Local festivals 【Benefits of Implementation】 - Reduction of environmental impact (decrease in CO2 emissions) - Noise suppression - Reduction of fuel costs - Use as emergency power supply - Enhancement of event brand image

• Power storage device

In the construction industry, a reliable emergency power supply is essential to ensure safety at the site and to continue work during disasters or power outages. Particularly in urban areas or regions with strict environmental regulations, power sources that minimize noise and exhaust emissions are required. Aggreko's hybrid generators equipped with batteries address these challenges and support business continuity at construction sites. 【Usage Scenarios】 - Emergency power supply for construction sites - Backup power during disasters - Continuation of work during power outages 【Benefits of Implementation】 - Reduction of noise and exhaust emissions - Decrease in fuel costs - Lower environmental impact

• Power storage device

In the seafood processing industry, rapid and uniform freezing is required to maintain freshness. Especially when handling large quantities of seafood, a lack of freezing capacity or temperature inconsistencies can lead to quality deterioration and reduced yield. The BUF2000 addresses flow regulation and capacity shortages in cold and hot water systems, contributing to the stabilization of the freezing process. 【Usage Scenarios】 - Cold water supply to rapid freezing storage - Pre-cooling process before freezing - Processing stages where temperature management is crucial 【Benefits of Implementation】 - Reduced freezing time - Improved product quality - Enhanced yield

• tank

In the brewing industry, temperature management during the fermentation process is a crucial factor that affects product quality and production efficiency. In particular, temperature changes influence yeast activity, significantly impacting the progress of fermentation and the final flavor of the product. Inadequate temperature management can lead to fermentation stagnation or the risk of undesirable components being produced. BUF2000 optimizes temperature management in the fermentation process, enabling stable quality and efficient production. 【Usage Scenarios】 - Breweries for beer, sake, wine, etc. - Temperature management of fermentation tanks - Capacity reinforcement for cooling and heating systems 【Benefits of Implementation】 - Stabilization of the fermentation process - Improvement in product quality - Enhancement of production efficiency

• tank

In agricultural irrigation systems, the management of water temperature significantly affects crop growth. Particularly in large-scale irrigation systems, fluctuations in water temperature can hinder uniform growth. BUF2000 addresses flow adjustments in cold and hot water systems and resolves capacity shortages, achieving stable water temperature supply. 【Usage Scenarios】 - Irrigation systems in large farms - Temperature management in greenhouse cultivation - Nutrient solution cultivation systems 【Benefits of Implementation】 - Promotion of growth through stabilization of water temperature - Improvement of overall system efficiency - Enhancement of crop quality

• tank

In the chemical plant industry, precise temperature management of reaction processes is essential for ensuring product quality and safety. In particular, temperature control, which greatly affects reaction rates and yields, is a critical factor that influences the overall efficiency of the plant. Inadequate temperature management can lead to runaway reactions, decreased quality, and even safety risks. BUF2000 addresses flow adjustment and capacity shortages in chilled and hot water systems, contributing to the stabilization of the reaction control process. 【Application Scenarios】 - Temperature control of chemical reaction processes - Removal of reaction heat and maintenance of temperature - Supply of cooling water and temperature management 【Benefits of Implementation】 - Stabilization of reaction processes - Improvement of product quality - Enhancement of overall plant efficiency

• tank

In the semiconductor manufacturing industry, precise temperature management is essential for improving the quality and yield of manufacturing processes. In particular, in wafer production and cleanroom environments, fluctuations in the temperature of cooling water directly affect product quality, necessitating stable cooling capabilities. Inadequate temperature management can lead to increased product defect rates and decreased manufacturing efficiency. The BUF2000 is a high-performance buffer tank that resolves flow adjustment and capacity shortages in cold and hot water systems. 【Usage Scenarios】 - Cooling water supply systems in semiconductor manufacturing plants - Air conditioning systems in cleanrooms - Cooling for precision equipment 【Benefits of Implementation】 - Stabilization of cooling water supply - Improved temperature management accuracy - Increased efficiency of manufacturing processes

• tank

In the metal processing industry, particularly in the quenching process, managing the cooling temperature, which affects product quality, is crucial. Rapid temperature changes can cause metal distortion and uneven hardness, potentially leading to defective products and reduced performance. BUF2000 contributes to improving product quality by stabilizing the cooling water temperature during the quenching process and achieving uniform cooling. 【Usage Scenarios】 - Stabilization of cooling water temperature in the quenching process - Prevention of distortion in metal parts - Reduction of quenching time 【Benefits of Implementation】 - Improvement in product quality - Reduction of defective products - Increase in productivity

• tank

In data centers, the stable operation of cooling systems is essential due to the high density of servers. Insufficient cooling capacity and unstable flow can lead to server overheating and system downtime, which may have serious impacts on business continuity. BUF2000 supports the stable operation of data centers by compensating for the cooling system's capacity shortfall and providing a stable flow. 【Usage Scenarios】 - Cooling systems in data centers - Temperature management in server rooms - Stabilization of cooling water supply 【Benefits of Implementation】 - Improved stability of cooling systems - Reduced risk of server overheating - Decreased system downtime

• tank

In the pharmaceutical manufacturing industry, strict temperature control during the manufacturing process is essential to maintain product quality. Particularly in the production of temperature-sensitive pharmaceuticals, temperature stability affects the efficacy and safety of the products. Inadequate temperature management can lead to product deterioration and quality degradation. BUF2000 resolves flow adjustment and capacity shortages in cold and hot water systems, enhancing the stability of temperature management in pharmaceutical manufacturing. 【Usage Scenarios】 - Pharmaceutical manufacturing plants - Research and development facilities - Quality control departments 【Benefits of Implementation】 - Improved product quality through stabilized temperature management - Increased efficiency in the manufacturing process - Compliance with regulations

• tank

In the food manufacturing industry, the stability of the cooling process is crucial for maintaining product quality. Insufficient cooling capacity and inadequate temperature management can lead to deterioration of food quality and decreased manufacturing efficiency. BUF2000 compensates for the lack of capacity in cooling systems and stabilizes temperature, contributing to the maintenance of food quality and improvement of manufacturing efficiency. 【Usage Scenarios】 - Food processing plants - Refrigerated warehouses - Enhancement of cooling equipment 【Effects of Implementation】 - Stabilization of cooling systems - Preservation of food quality - Improvement of manufacturing efficiency

• tank

The container-type generator (1500 kVA) is a containerized diesel generator that provides stable supply of large-capacity power. It is housed in an ISO standard 20ft container, allowing for quick installation both indoors and outdoors due to its soundproof and weather-resistant design. It features a robust structure that can handle high-load operations, along with advanced control and protection functions. Consideration has also been given to exhaust emissions and noise, making it suitable for various sites such as manufacturing plants, construction sites, events, and emergency power supply. From continuous operation to emergency response, it supports business continuity as a reliable power solution.

• power supply

The 1000 kVA is a container-type diesel generator that provides stable supply of high-capacity power. It is housed in an ISO standard 20ft container, allowing for quick installation both indoors and outdoors due to its soundproof and weather-resistant design. It features a robust structure that can handle high-load operations, along with advanced control and protection functions. Consideration has also been given to exhaust emissions and noise, making it suitable for various sites such as manufacturing plants, construction sites, events, and emergency power supply. It supports business continuity as a reliable power solution, from continuous operation to emergency response.

• power supply

The Aggreko 5.0, 6.0 MVA load bank MC1C is a large-capacity testing device used to verify the performance of generators and UPS under actual operating conditions. It can finely control loads from 1 kVA to 6,300 kVA, and with a power factor of 0.8, it enables real load testing that includes reactive power. The included handheld terminal allows for intuitive operation of load increases, rapid surges, and shutdowns, significantly improving testing efficiency on-site. The device is housed in a 10ft container, offering excellent transportability and durability, and can operate stably even in harsh environments. With multiple protection features and a robust structure, it is a load bank that balances safety and reliability.

• Heating device
• Electronic Load Unit

Aggreko's 3.3MVA load bank MC1C is a large-capacity testing device designed to verify the performance of generators and UPS under actual operating conditions. It can finely control loads ranging from 1kVA to 3,300kVA, and thanks to its 0.8 power factor capability, it allows for real load testing that includes reactive power. The included handheld terminal enables intuitive operation for load increases, sudden surges, and shutdowns, significantly improving testing efficiency on-site. The device is housed in a 10ft container, offering excellent transportability and durability, allowing for stable operation even in harsh environments. With multiple protection features and a robust structure, it is a load bank that balances safety and reliability.

• Heating device

The BUF1000 is a high-performance buffer tank designed to compensate for flow fluctuations and capacity shortages in cold and hot water systems. It ensures a maximum system capacity of 970L and allows for sectioning of cold and hot water through removable baffle plates. Made of highly corrosion-resistant HDPE, it reduces the risk of corrosion and is compatible with a wide range of heat transfer fluids. It enhances the stability and efficiency of systems in various applications such as manufacturing sites, factories, event venues, and emergency air conditioning. Its compact design makes transportation and installation easy, providing a solution that combines reliability and flexibility.

• tank

The BUF2000 is a high-performance buffer tank that resolves flow adjustment and capacity shortages in cold and hot water systems. It ensures a maximum system capacity of 2,100 liters and allows for the sectioning of cold and hot water through removable baffle plates. Made of highly corrosion-resistant HDPE, it reduces the risk of corrosion and is compatible with a wide range of heat transfer media. It enhances the stability and efficiency of systems in various applications, including manufacturing sites, factories, event venues, and emergency air conditioning. Its compact design makes transportation and installation easy, providing a solution that combines reliability and flexibility.

• tank

The AHC200 is a high-performance air conditioning handler suitable for a wide range of applications, including manufacturing sites, factories, and event venues. With a cooling capacity of 200 kW and a heating capacity of 330 kW, it creates a comfortable environment even under harsh temperature conditions. Its powerful airflow of up to 20,000 m³/h and variable speed control allow for flexible operation. The aluminum frame structure and insulated panels ensure durability and energy efficiency. Its compact design (width 2400 × depth 1450 × height 2100 mm) makes transportation and installation easy. It is ideal for sites that require reliability and responsiveness, such as factory process management, event air conditioning, and emergency response.

• air conditioning

Aggreko's 90kVA small battery energy storage system (BESS) is a next-generation solution that balances decarbonization and efficiency. It works in conjunction with diesel generators and renewable energy to reduce generator operating hours and significantly cut fuel consumption, emissions, and noise. With a capacity of 127.9kWh (usable 115.1kWh), a nominal efficiency of 90%, and a charging time of about 3 hours, it features a plug-and-play design for quick deployment with no capital investment required. It is waterproof with an IP55 rating and can operate in harsh environments with a temperature range of -12°C to +50°C. Aggreko's remote monitoring enables optimization, supporting companies in achieving their environmental goals and reducing costs.

• Power storage device

Aggreko is a global leader in providing power supply and temperature control solutions worldwide. In Japan, we rapidly constructed a 200MW temporary power plant after the Great East Japan Earthquake and were responsible for power supply during the Tokyo 2020 Olympics. We provide reliable power and temperature management where and when needed. We cater to a wide range of sectors including events, petrochemicals, power generation, data centers, and manufacturing, with flexible contracts available from short-term to long-term. We maximize efficiency with the latest technology and live monitoring, promoting sustainability with fuel-flexible generators and environmentally friendly options. With no CAPEX required and 24/7 support, we continue to support Japan's industry and society.

• Generators and transmission motors

Aggreko's medium-sized battery energy storage system (BESS) is a next-generation solution for a decarbonized society. With zero CO₂ emissions and zero noise, it supports collaboration with renewable energy and hybrid operation with generators, significantly reducing fuel consumption and emissions. With a capacity of 500kW/250kWh and a plug-and-play design for rapid deployment, it requires no capital investment. It caters to a wide range of applications, including stabilizing the power grid, peak load alleviation, and emergency power supply, contributing to environmental regulations and the SDGs. Aggreko aims for net zero by 2050, providing sustainable power supply to Japan's industries.

• Power storage device

Product Introduction for the Food and Beverage Industry Aggreko offers rental solutions that flexibly provide the temperature, humidity, and power necessary for food and beverage manufacturing in Japan. Our lineup includes refrigeration and cooling equipment, cooling towers, humidity control, air handlers, generators, heaters, and heat pumps. We support a wide range of applications such as meat processing, dairy products, beverage manufacturing, fermentation, storage, and wastewater temperature management, ensuring quality maintenance and continuous production.

• Other refrigerated/frozen

Features of Aggreko Temperature Control Equipment Rental Solutions • Total service including thermal design/planning/engineering • Frame-type and container-type equipment (easy installation, minimal civil engineering required) • Scalability through parallel connection (from tens of kW to several MW) • Support for procedures related to various regulations • Rental of peripheral components and equipment such as pumps, flexible hoses (camlock type), reducers, manifolds, generators, transformers, and distribution boards.

• Chiller

At a large-scale tennis tournament held in Tokyo, Aggreko provided a 90kVA battery energy storage system (BESS) to ensure that broadcasting could continue without interruption even during power outages. This system automatically switches in the event of a generator failure, securing backup power for up to 30 minutes. It was seamlessly integrated into the existing infrastructure and covered the entire tournament over a period of 12 days. As a result, it achieved a balance of reliability and environmental consideration, delivering uninterrupted power to fans around the world.

• Generator