テックトレーディング List of Products and Services

The "Presto NEO Gear Motor / Hyponic Reducer" can be washed with water, making it suitable for machines that may splash water or require regular washing. It is available in protection ratings IP65 and IP67. The "Presto NEO Gear Motor" ranges from 40W to 2.2kW, while the "Hyponic Reducer" offers a wide variation from 15W to 2.2kW. Additionally, we also offer the "Compact Inverter CAI Series," which is easy to operate with volume and switch controls on the front panel. 【Presto NEO Gear Motor Specifications】 ■ Output Shaft: Made of rust-resistant stainless steel ■ Wiring - 40–90W: Cab tire cable type - 0.1–2.2kW: Conduit terminal box (terminal block type) ■ Coating: Polyester-based high-temperature baked paint *For more details, please refer to the PDF document or feel free to contact us as we have offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

The "ZK Series" is a unit that combines FYH's original Z-Lock sleeve, which replaces the current UK tapered hole bearings and adapters. Installation is as simple as tightening two set screws by hand with just one hex wrench. Since it is pre-assembled and shipped from the factory, it can be used immediately after being taken out of the box. We offer a lineup that includes the pillow block unit "ZKP," the thick-walled pillow block unit "ZKIP," and the square flange unit "ZKF." 【Features】 - A unit that combines FYH's original Z-Lock sleeve - Pre-assembled and shipped from the factory, allowing for immediate use after unpacking - Installation requires only one hex wrench to tighten two set screws by hand - No impact on the internal clearance of the bearing due to over-tightening *For more details, please refer to the PDF document or feel free to contact us as we have offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

The "self-aligning roller bearing unit" has many advantages compared to commonly used pillow blocks, such as a larger alignment angle, ease of installation, and convenience of maintenance. The triple seal, which has an alignment angle of ±2°, accommodates various angular changes of the shaft and maintains constant contact with a special ring called a sealing ring with uniform force. The integrated ductile cast iron housing has about twice the strength of standard gray cast iron, and the flat back design provides strength during installation and withstands high loads. [Features] - Z-lock: Locking system using an inner diameter tapered locking collar - Triple seal: The inner ring maintains constant contact to prevent dust, regardless of the alignment angle - Flat back housing: Approximately twice the strength of standard gray cast iron - By moving the snap ring located on the back of the unit, it can be easily changed from a fixed type to a movable type *For more details, please refer to the PDF document or feel free to contact our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

We would like to introduce our "Corrosion-Resistant Unit." The stainless steel housing has been redesigned, and the surface, which features laser marking, is so smooth that there are no places where water droplets remain after washing. Covers can be attached to all model numbers. Additionally, all stainless steel bearings are pre-filled with H1-grade food grease, making them safe for use in the food-related industry. 【Features】 ■ The smooth surface and flat mounting surface help reduce the incidence of bacteria. ■ Covers can be attached to all model numbers. ■ The plastic cover has a drain hole, allowing for immediate drainage even if water enters. ■ All materials are SCS14, providing improved corrosion resistance compared to SCS13. ■ Designed to withstand harsh operating conditions. *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

We would like to introduce our unit, the "Clean Series." We offer a "pillow type unit" that combines a compact bearing with a special alloy bearing box, which is a maintenance-free design. Additionally, we have a "hexagonal flange type unit" that features a rubber-coated surface on the cover, ensuring good adhesion with the bearing box. We also provide a stainless steel version that can accommodate rubber-coated covers for all units. 【Features】 <Pillow Type Unit> - A compact and lightweight unit that combines a special alloy bearing box with a maintenance-free design. - Designed for the miniaturization and lightweight of equipment machinery, it features a screw method for easy attachment to the shaft. - Cylindrical hole (with set screw). *For more details, please refer to the PDF document or feel free to contact us as we have sales offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

This document introduces the "Insert Bearing Units / Self-Aligning Roller Bearing Units" handled by our company. It explains the structure and features, unit selection, installation methods, and more. Additionally, it includes dimension tables for insert bearing units such as "Pillow Type Units" and "Thick-Walled Pillow Type Units." FYH bearing units are used in various locations according to their applications and specifications. [Contents (Partial)] <Insert Bearing Units> ■ Technical Explanation - Structure and Features - Unit Selection ■ Unit Dimension Table ■ Parts and Accessories *For more details, please refer to the PDF document or feel free to contact us at our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

We would like to introduce our high-strength series "STEEL UNITS." Our lineup includes the pillow block unit "UCP-H5," the square flange unit "UCF-H5," and the square flange unit with a seal "UCFS-H5," among others. The bearing housings of these products are made by cutting general structural rolled steel (SS400), which offers superior strength characteristics such as higher fracture strength and impact resistance compared to cast iron bearing housings (FC200). 【Product Lineup】 ■ Pillow block unit "UCP-H5" ■ Square flange unit "UCF-H5" ■ Square flange unit with seal "UCFS-H5" ■ Diamond flange unit "UCFL-H5" ■ Round flange unit with seal "UCFC-H5" ■ Take-up unit "UCT-H5" *For more details, please refer to the PDF document or feel free to contact us at our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

The "Seismic Isolation Table TSD Type" is a rolling seismic isolation device that combines LM linear guides for smooth linear motion at right angles. With smooth movement in all 360° directions, it can absorb the shaking from earthquakes, maintaining a constant posture relative to the floor, even during large or prolonged tremors. This provides excellent seismic isolation effects. When introducing earthquake countermeasure equipment to absorb shaking and continue operations in case of emergencies, it is essential to choose devices that can consistently deliver stable seismic isolation effects. 【Features】 ■ Customizable selection based on the mounted object ■ Built-in restoration function, easy to return to the origin ■ Easy system construction and recovery ■ Safe and secure ■ Compliant with RoHS directive *For more details, please refer to the PDF document or feel free to contact our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Anti-vibration, earthquake-proof, vibration-isolating devices

The "Seismic Isolation Module TGS Type" is a compact device that condenses the technology of seismic isolation systems for buildings. By connecting compact modules, it enables partial seismic isolation tailored to various applications, from standalone installations for production equipment and measuring instruments to entire floors such as data centers, server rooms, and operation centers. It also responds to the shaking of large earthquakes that have occurred in recent years with its unique mechanism. Customization is possible according to your needs, so please feel free to consult us. 【Features】 ■ Compact condensation of seismic isolation functionality ■ The device does not separate even when exceeding the maximum displacement ■ High stability, capable of withstanding approximately 13 times the load compared to typical planar contact types ■ Low device height of 100-112mm, making it compact ■ Modules are made of aluminum die-cast, making them lightweight ■ Load capacity ranges from 750 to 3000 kgf/m2, accommodating various equipment *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Anti-vibration, earthquake-proof, vibration-isolating devices

This document is a linear guidebook regarding "THK Seismic Isolation," suitable for earthquake countermeasures. It includes seismic isolation devices for buildings, floor seismic isolation devices, precision measurement equipment seismic isolation devices, semiconductor manufacturing equipment seismic isolation devices, and art object seismic isolation devices. By applying the innovative technologies of "LM Linear Guides" and "Ball Screws," we develop seismic isolation and damping devices to protect buildings and equipment from the threat of earthquakes. The earthquake that will come someday may be the one that comes now. Please make use of this for selecting products related to "earthquake countermeasures," such as building seismic isolation and equipment seismic isolation. [Contents (excerpt)] ■ Building seismic isolation ■ Equipment seismic isolation ■ THK seismic isolation ■ Seismic isolation devices for buildings ■ Damping devices for buildings *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Anti-vibration, earthquake-proof, vibration-isolating devices

The "Roller Linear Guide EXRAIL" is a linear motion bearing that employs needle rollers for high rigidity, high motion accuracy, and high damping characteristics. It consists of rails and blocks with four precisely ground tracks. The block is further composed of the main body, needle rollers, return caps, and seals. It is widely applicable to heavy load and precision drive applications, including precision machine tools. Please feel free to consult us when needed. 【Features】 ■ High rigidity ■ High motion accuracy ■ High damping characteristics ■ Corrosion-resistant specifications ■ Dustproof ■ Maintenance-free mechanism *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

This catalog introduces the "Positioning Table," a general-purpose precision positioning table driven by a pulse motor. We offer models such as the "Positioning Table NWT type," which achieves a positioning accuracy of less than 3μm and a repeat positioning accuracy of ±0.2μm, and the "Alignment Stage NTX type," which allows for free setting of the rotation center position. The catalog is rich in information about the structure, features, accuracy, and specifications of AC servo motors and drivers. Please make use of it for product selection. [Contents] ■ Positioning Table ■ Positioning Table NWT type ■ Alignment Stage NTX type ■ Smart Table *For more details, please refer to the PDF document or feel free to contact our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Other machine elements

This catalog introduces the "Ball Spline," a linear motion mechanism that utilizes the rolling motion of balls. We offer mechanisms such as the "Rotary Ball Spline," which can perform linear and rotational motion simultaneously, and the "Stroke Ball Spline," which is a bearing for linear motion with a limited stroke. We provide detailed information on the structure and features, preload gaps, dimension tables, and more. Please use this information to assist in selecting products. [Contents] ■ Ball Spline ■ Rotary Ball Spline ■ Stroke Ball Spline ■ Ball Screw Spline *For more details, please refer to the PDF materials or feel free to contact our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

This catalog introduces "dry bearings." In the resin category, we feature the completely oil-free bearing "Daidain DDK05," which requires no lubricants at all, as well as the "Daidain DDK02," which does not use any environmentally harmful substances like lead, and the "DaiBest DBB01," which is made from lead-free materials and also requires no lubricants. In the metal category, we offer a wide range of products including the metal oil-free bearing "Thermaloy D type" and the lead-free material "Thermaloy TM." [Contents] ■ Resin category ■ Metal category *For more details, please refer to the PDF document or feel free to contact us as we have offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Other machine elements

"Top Ball" is a linear motion mechanism that utilizes the rolling motion of a ball. This product features high load capacity and long lifespan, along with self-aligning properties. The floating seal smoothly follows the shaft even when there is eccentricity in the outer and inner diameters at both ends due to the self-aligning function. Additionally, it enables excellent high-speed performance, with a motion speed of up to 5 m/s. Please feel free to consult us when you need assistance. [Features] ■ High load capacity and long lifespan ■ Self-aligning properties ■ Floating seal ■ High-speed compatibility *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Other machine elements

The "slide bush" is a linear motion mechanism that utilizes the rolling motion of balls. This product incorporates a retainer within a cylindrical outer casing, and the guide surface of the retainer is designed and manufactured to allow the balls to circulate smoothly. This enables smooth linear motion. Due to its simple mechanism, it achieves low-friction linear motion and is used in a wide range of applications, including transport equipment, food machinery, and semiconductor manufacturing equipment. Please feel free to consult us when you need assistance. 【Features】 ■ Compact mechanism that makes effective use of space ■ Diverse shapes and mounting methods ■ Options available to suit the environment ■ Compatibility ■ Double lip seal *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Other machine elements

The "Slide Screw" is a unique drive device that effectively utilizes the friction between radial ball bearings and the shaft to convert rotational motion into linear motion. Due to its simple mechanism, maintenance is easy and installation is straightforward. While achieving precise positioning may seem difficult, by fully utilizing the characteristics of this product, it can be used in the transport sections of various devices. Please feel free to consult us when you need assistance. 【Features】 ■ Linear drive is possible with a round shaft ■ High mechanical efficiency ■ Can be used without lubrication ■ Overload prevention mechanism *For more details, please refer to the PDF materials or feel free to contact our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

This catalog introduces the "Slide Linear Guide," a high-precision and high-rigidity linear guide bearing. We offer a range of products including the compact and lightweight "Slide Linear Guide Miniature SEBS type," the compact "Slide Linear Guide SGL type" with high load capacity, and the "Slide Linear Guide SGW type," which is suitable for single-axis use. Detailed information on mounting methods, rated loads, precision, rail lengths, and more is included. Please use this information to assist in your product selection. [Contents] ■ Slide Linear Guide ■ Slide Linear Guide Miniature SEBS type ■ Slide Linear Guide SGL type ■ Slide Linear Guide SGW type *For more details, please refer to the PDF document or feel free to contact our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

This catalog introduces the "Slide Way," a non-recirculating linear motion bearing. We offer a variety of products including the "Slide Table" which incorporates the Slide Way, the "Miniature Slide" which utilizes balls as rolling elements, and the "Gonioway" for curved motion bearings. Detailed information on the structure and features, rated life calculations, dimension tables, and more are included. Please make use of this information for product selection. [Contents] ■ Slide Way ■ Slide Table ■ Miniature Slide ■ Gonioway *For more details, please refer to the PDF document or feel free to contact our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

This catalog introduces the "Stroke Bush." In addition to linear motion, we offer "Stroke Bushes" that can perform rotary motion, as well as the "Slide Rotary Bush SRE Series" and "Slide Rotary Bush RK Series," which allow for significant compactness. We provide detailed information on the structure, features, types, and installation methods. Please make use of this for product selection. [Contents] ■ Stroke Bush ■ Slide Rotary Bush SRE Series ■ Slide Rotary Bush RK Series *For more details, please refer to the PDF document or feel free to contact our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Metal bearings

This catalog introduces "shafts." We offer a lineup including the "slide shaft," a round shaft used in combination with slide bushes, the "spindle shaft" that meets customer requirements, the standard specification "spindle unit (M-BT type / G-MA type)," and the "general machinery shaft," which is produced based on customer-provided drawings. We have included features and examples of processing. Please make use of this information for product selection. [Contents] ■ Slide Shaft ■ Spindle Shaft ■ Spindle Unit ■ General Machinery Shaft *For more details, please refer to the PDF document or feel free to contact us at our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Other machine elements

The "1-axis actuator" is a compact product that integrates a slide linear guide and a ball screw. We offer the "BG" and "BH" series. With a built-in support unit, complex precision adjustments are unnecessary, allowing for significant reductions in assembly processes. By adopting a U-shaped linear guide rail and placing a slide block that combines the functions of a linear guide block and a ball screw nut inside it, we have achieved a compact design. 【Features】 ■ No adjustment required ■ Space-saving ■ High precision ■ High rigidity *For more details, please refer to the PDF document or feel free to contact us at our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Other machine elements

The "VC/VX series" is a geared motor equipped with an overload protection device that prevents damage to machinery due to overload. With a dip switch, it is possible to set the cutoff current and cutoff time. Thanks to microcontroller control, it detects overloads with high-precision relay signals and achieves reliability that is resistant to temperature changes. 【Features】 ■ Detects overcurrent caused by overload fluctuations ■ Cutoff current and cutoff time can be set via dip switch (Cutoff current: 16 levels, Cutoff time: 9 levels) ■ Overload detection error ±3% ■ Energy-saving and low noise ■ Rigid and long-lasting *For more details, please refer to the PDF document or feel free to contact us as we have offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Gearbox

This document introduces examples of applications for gearboxes, reducers, and geared motors. From the industrial sector, we showcase applications such as "electric shutter openers" and "sheet shutter openers" for buildings and factories, and from everyday life, we include examples like "parking systems" and "blind openers." The geared motors we handle, the 'VX/VC series,' allow for variable speed operation using inverters, catering to various applications and environments. 【Examples of Applications (Partial)】 <Industrial Sector> ■ Buildings/Factories/Electric Shutter Openers ■ Factories/Sheet Shutter Openers ■ Factories/Panel Door Openers ■ Factories/Motor in Wheel ■ Construction/Concrete Drill Use *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Gearbox

The "VG" is a geared drive for transport carts with a compact and simple appearance. It supports high-speed and high-frequency operations, and allows for the selection of servo motors from various manufacturers. Maintenance of the motor and electromagnetic brake is easy. Additionally, options such as low noise specifications, low backlash specifications, and cleanroom specifications are also available. 【Features】 ■ Built-in reduction gear in the wheels for a neat design ■ Compact and simple appearance ■ High-quality design even for small lots ■ High efficiency and high strength design backed by extensive experience ■ Design that shapes the customer's ideals ■ Optional specifications (low noise, low backlash, cleanroom) *For more details, please refer to the PDF materials or feel free to contact us at our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Gearbox

The "VX-H Series" is a high-precision reduction gear dedicated to servo motors. Thanks to our unique gear processing technology for the "Parallel Axis VX Series," we have achieved low noise levels. By enhancing the precision of the components, we have minimized backlash without applying preload. We offer both foot-mounted and flange-mounted types. 【Features】 ■ Suppresses backlash without applying preload ■ High rigidity due to the use of the same casing as the Parallel Axis VX Series ■ Achieves low noise through our unique gear processing technology for the Parallel Axis VX Series ■ High efficiency due to the stepped gear structure of the Parallel Axis VX Series *For more details, please refer to the PDF document or feel free to contact us at our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Gearbox

The "VC series" is a small geared motor with a concentric hollow shaft and dual flange mounting type, allowing for flexible installation. All models are equipped with built-in thermal protectors to prevent motor burnout due to overload. High-precision technology ensures stable quietness. Additionally, it features a smart form with a compact design, and all models are grease-lubricated, requiring no maintenance. 【Features】 ■ All models come with built-in thermal protectors ■ Excellent energy-saving and high-efficiency performance ■ Smart form with a compact design ■ Our unique hypoid gear has been miniaturized, inheriting excellent strength and long lifespan ■ Safety cap can be installed *For more details, please refer to the PDF document or feel free to contact our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Gearbox

This catalog introduces our "Geared Motors" that comply with the Top Runner standards. Starting with the "VX series Parallel Shaft (Standard Type)" which adds ease of use to high reliability performance, we also feature the "VC series Orthogonal Shaft (Waterproof Type)" equipped with high-performance VC motors, and "Geared Motors with Protective Relay," among others. Please make use of this information for product selection. 【Contents】 ■ VX series / VC series Product System and Features ■ VX series Standard Type Waterproof Type ■ VC series Standard Type Waterproof Type Compact ■ VX-H series ■ With Protective Relay ■ Technical Data ■ Price List and Application Examples *For more details, please refer to the PDF materials or feel free to contact our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Gearbox

The "Maki Ace" is a high-efficiency worm reduction gear that supports speeds up to 3000 rpm. Compared to the S series, torque has increased by over 60%, and overhang load has increased by over 80%. We offer a lineup that includes the single-stage reducer "MA (MAL) series," the two-stage reducer (worm/helical) "MAF series," and the two-stage reducer (worm/worm) "MAH series." 【Features】 ■ High Torque & Powerful - Torque has increased by over 60% and overhang load by over 80% compared to the S series. ■ High Efficiency - Efficiency has increased by over 10% compared to the S series. - Pursuit of larger modules. - Improved simultaneous contact lines, increased meshing length, increased tooth contact area, and better lubricity of tooth surfaces. *For more details, please refer to the PDF materials or feel free to contact us at our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Other machine elements

The "Cylinder Ace" is a high-performance linear actuator equipped with functions such as simplicity, safety, and strength. Its meticulous design and suitable material usage achieve compactness and high rigidity. Thanks to its sealed grease lubrication, it remains clean and maintenance-free for long periods. Additionally, the use of high-performance screws, nuts, and gears allows for stable operation with low power consumption. 【Features】 ■ Lightweight ■ Compact and high rigidity ■ Safety-focused ■ Maintenance-free ■ Stable operation *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Other machine elements

We would like to introduce the "Jack" handled by Tech Trading. The static load is permissible at 1.2 to 2 times the operating load. We offer a lineup including the standard type "JA/JB," the traveling nut type "JTA/JTB," and the bevel jack "NX/BX," allowing you to choose a model that suits your application. 【Partial Lineup】 ■ Standard Type JA (Screw Type: Trapezoidal) ■ Standard Type JB (Screw Type: Ball) ■ Traveling Nut Type JTA (Screw Type: Trapezoidal) ■ Traveling Nut Type JTB (Screw Type: Ball) ■ Bevel Jack NX/BX (Screw Type: Trapezoidal & Ball) *For more details, please refer to the PDF document or feel free to contact us as we have offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Other machine elements

The "One-Way Hinge" is a mechanical component that combines the functions of a one-way clutch and a torque limiter. When opening the lid, it can be done lightly (only the weight of the lid), and it can be held at any desired position. As a standard, torque settings can be made in the range of 0.1 to 3.0 N·m in 0.1 N·m steps. There are two types available: Type R (shield color: black), which generates torque when the shaft is rotated clockwise, and a type that generates torque when rotated counterclockwise (shield color: white). 【Features】 ■ Compact, thin, and high torque ■ Free stop ■ Less affected by environmental conditions (temperature and humidity) ■ Wide range of torque settings ■ Two types of torque generation direction (R and L) available *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• clutch

The "GXZ type" is a one-way clutch that exhibits excellent heat resistance characteristics due to all its components being made of metal. It is compact and slim, allowing for space-saving in devices. We offer two types: the R type, which locks when the shaft is rotated clockwise, and the L type, which locks in the opposite direction. Additionally, it comes with a seal, allowing for standalone supply of the one-way clutch, and it can be easily assembled into gears and pulleys (made of resin) through press fitting. 【Features】 ■ Resistant to environmental conditions (temperature and humidity) ■ Compact size ■ Two locking directions available (R and L) ■ Standalone supply possible ■ Easy assembly *For more details, please refer to the PDF document or feel free to contact us.

• clutch

"Miracle Urethane" is a caster that enables manual transportation of 1.2 tons. The starting rotational resistance at 500 kgf is reduced by 40% compared to standard urethane wheels and by 5% compared to monomer casting nylon wheels. After starting, the wheel's elastic recovery increases its lightness, contributing to labor management and productivity improvement. In addition, we also offer "KAIZEN casters" for powered towing and "STM casters" for medium loads. 【Features】 ■ Minimizes energy loss through elastic recovery ■ Helps reduce the workforce and actively promotes the employment of women and seniors ■ Capable of transporting 1200 kg by one person in a single trip ■ Improves work efficiency and reduces costs ■ Expands the possibilities of manual transportation by reducing heavy labor *For more details, please refer to the PDF document or feel free to contact us as we have offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• caster

We would like to introduce the "Ball Valve SUS304" from Pisco, handled by Tech Trading Co., Ltd. The metal material used is SUS304, making it suitable for applications in chemical environments. It can be used safely, securely, and reliably when combined with optional products. 【Features】 ■ Suitable for applications in chemical environments ■ Metal material is SUS304 ■ Seal material is FKM ■ Can be used safely, securely, and reliably in combination with optional products *For more details, please refer to the PDF document or feel free to contact us as we have offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Pipe Fittings

The "Flexible Holder" is a related device for vacuum pads that is suitable when the workpiece's suction surface is inclined or curved. It features a stroke that softens the impact during workpiece contact. With a built-in spring, it resets the tilt, ensuring that the orientation of the pad's suction surface remains constant during the workpiece suction operation. 【Features】 - The vacuum pad follows the inclined work surface for stable suction. - Stroke included to soften the impact during workpiece contact. - Built-in spring resets the tilt. - The orientation of the pad's suction surface remains constant during workpiece suction operation. *For more details, please refer to the PDF document or feel free to contact us as we have offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Pipe Fittings

Tech Trading Co., Ltd. has newly added 18 shapes and 160 models of "Tube Fittings with Corrosion Resistance Equivalent to SUS303." These fittings use special stainless steel equivalent to SUS303 or SUS303 itself, making them suitable for applications requiring strength or in corrosive environments. The double and triple joints allow for the adjustment of the tube's extraction angle after installation, enabling compact and concentrated piping. 【Features】 ■ Suitable for applications requiring strength or in corrosive environments ■ Uses special stainless steel equivalent to SUS303 or SUS303 ■ Utilizes seal rubber material "HNBR" for low-concentration ozone countermeasures ■ Offers clean washing specifications suitable for various manufacturing processes that are sensitive to particles and oil *For more details, please refer to the PDF document or feel free to contact our sales offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Pipe Fittings

We would like to introduce the "Vacuum Pad Holder with Dust Catcher" handled by Tech Trading Co., Ltd. For the spring-type holders VPSC, VPC, VPD, and VPF, which generate wear particles due to the sliding of the shaft and bush, we offer a low-cost and simple dust catcher type as an option. Please make use of this for addressing wear particles in spring-type pad holders. 【Product Lineup (Partial)】 ＜VPSC (Spring Type)＞ ■ Vacuum outlet: Top, slim type with built-in dust catcher and quick-connect fitting ■ Vacuum outlet: Top, slim type with built-in dust catcher and barb fitting ■ Vacuum outlet: Top, slim type with built-in dust catcher and nemesis ＜VPF (Direct Mount Spring Type)＞ ■ Standard type with dust catcher *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Vacuum Equipment

We would like to introduce the German-made automatic continuous lubricator 'perma', handled by Tech Trading Co., Ltd. In addition to reducing maintenance costs, it allows for the selection of lubrication intervals. Furthermore, it is a safe and reliable product even in hazardous locations, dusty environments, and wet conditions. Our lineup includes the "perma CLASSIC" with a simple operating principle, as well as the "perma FUTURA," which allows for easy visibility of lubricant levels. 【Product Lineup】 ■perma FLEX ■perma CLASSIC ■perma FUTURA ■perma STAR VARIO *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• others

The "Camlock Fastener" is a product that allows for locking and unlocking with a simple one-touch operation by pressing the head of the plug. Made entirely of stainless steel, it has excellent corrosion resistance and features a cam lock design that makes it resistant to disconnection due to vibration. Additionally, when locked, the head of the plug becomes flat to prevent accidental unlocking. Please use a pointed object to press when locking and unlocking. 【Features】 ■ Reduces work time ■ Fits flat ■ Prevents loss of parts ■ Resistant to disconnection due to vibration *For more details, please refer to the PDF document or feel free to contact us as we have offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• fastener

The "HEU Series" is an energy-saving cooling device that does not use a compressor (refrigeration unit). Since it is free of refrigerants, it is not subject to the Fluorocarbon Emission Control Law and does not use any refrigerants at all. It can be used for cooling optical laser equipment and devices in clean rooms. 【Features】 ■ Energy-saving cooling device without a compressor (refrigeration unit) ■ Uses 7°C chilled water for air conditioning ■ Refrigerant-free ■ High-pressure pump driven by an inverter ■ Same capacity in 50/60Hz regions *For more details, please refer to the PDF materials or feel free to contact us as we have offices in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Cooling system

The "RKE1500C-VRA" is a non-fluorocarbon inverter chiller that achieves zero refrigerant management workload by adopting HFO-1234yf. With the TESC (Three Eco Control) system, it is possible to operate with the minimum necessary power consumption to control the rotation speed of three motors. Power consumption changes in accordance with the load rate. 【Features】 ■ Zero refrigerant management workload due to the adoption of HFO-1234yf ■ Significant reduction in environmental impact ■ Equipped with TESC (Three Eco Control) ■ Allows setting of flow rate or water supply pressure in addition to operating frequency ■ Capable of operating at optimal flow rate or pressure for the load *For more details, please refer to the PDF document or feel free to contact us at our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• air conditioning

The "Hertz Free Dryer" is a slim, easy-to-install refrigerant compressed air dehumidifier that does not stop even under high loads. It has been designed to accommodate increased airflow from the compressor, reducing the need to select a higher class model. Additionally, it processes the same amount of air at both 50 and 60 Hz, making model selection straightforward. With a capability to operate at ambient temperatures of up to 50°C, it minimizes the risk of stopping in the harsh heat of Japanese work environments. 【Features】 ■ Supports ambient temperatures up to 50°C ■ Multi-information LED ■ Corrosion-resistant ■ Built-in electromagnetic drain trap ■ Front air intake and upward air discharge *For more details, please refer to the PDF document or feel free to contact our offices located in Tokyo, Tama, Kanagawa, Kumagaya, Tochigi, and Yamagata.

• Dehumidifier

We have stocked compatible guides made by THK. Short delivery times are available (for out-of-stock items, please inquire separately), and we only support standard specifications. (SUS specifications, surface treatments, joint specifications, preload, and precision grades are not available) *SRS will be SUS. Please feel free to contact us if you have any requests. 【Supported Series】 ■SSR: 15・20・25 ■SHS: 15・20・25 ■SRS: 9XM・9WM・12M・12WM・15M・15WM *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "λGEL(R) COH Series" is a sheet-like thermal conductive gel with excellent electrical insulation and flame retardancy. Its outstanding flexibility and adhesion allow it to conform to fine uneven surfaces, preventing air pockets from forming at the contact surface. Please feel free to contact us if you have any inquiries. 【Basic Specifications】 ■ Size: 400×400mm ■ Thickness: 0.5, 1.0, 2.0, 3.0mm *For more details, please download the PDF or feel free to contact us.

• Other polymer materials
• Other filters