BuhinDana List of Products and Services

We would like to introduce the fan replacement unit '300/600/1500-FAN-01' that we handle. Starting with the "300-FAN-01" compatible with HWS300, we also offer the "600-FAN-01" compatible with HWS600, and the "1500-FAN-01" compatible with HWS1000, 1500, and 1800T. Please contact us for fan replacements, which will be provided for a fee. Additionally, the insulation tube for the output terminals of HWS1500 and 1800T can use "TCV-2001". 【Product Lineup】 ■300-FAN-01: Compatible model HWS300 ■600-FAN-01: Compatible model HWS600 ■1500-FAN-01: Compatible models HWS1000, 1500, 1800T *For more details, please refer to the PDF document or feel free to contact us.

• fan

The "EZA Series" is an isolated DC-DC converter that performs bidirectional power conversion. Through serial communication, it is possible to control voltage and current. In addition to external control via communication, it can also autonomously determine the direction of power conversion while monitoring the input and output voltages. It is well-suited for battery systems using solar power generation, small wind power generation, and energy regeneration systems such as motors. 【Features】 ■ Bidirectional boost and buck conversion can be performed with a single unit ■ High safety and advantageous for noise countermeasures, featuring high-frequency isolation for input and output ■ Autonomous operation allows for automatic switching of conversion direction to maintain constant input and output voltage ■ Capable of parallel operation, enabling rapid switching of conversion direction without stopping the converter ■ Serial communication (RS485) allows for control of current, voltage, conversion direction, and status monitoring *For more details, please refer to the PDF document or feel free to contact us.

• power supply

The "DBM20/ZBM20 series" is a module that allows for extended output hold time and output retention during momentary voltage drops simply by connecting it to a power supply. It stores energy in the built-in electrolytic capacitor of the module and provides backup when needed. Additionally, we offer the "ZBM-AC series," which can also extend output hold time and provide backup during momentary voltage drops by connecting to the primary side of the power supply. 【Features】 ■ Simply connect to the power supply output to enable extended output hold time and backup during momentary voltage drops ■ Extends output hold time during input interruption, momentary stoppage, or voltage drop ■ Provides strong backup for the system ■ Further extends output hold time through parallel connection ■ Maintains output voltage under various conditions *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The "CUT-J Series" is a board-type triple-output AC-DC power supply that does not require a minimum load current for each channel. It is available in 35W and 75W models. The dimensions are 35W: 2×4 inches and 75W: 3×5 inches, achieving approximately 35% miniaturization compared to our current triple-output power supplies. This power supply is suitable for control applications in general industrial equipment and medical devices, and we offer a wide range of optional products. 【Features】 ■ Low profile and compact (35W: 2×4 inches, 75W: 3×5 inches) ■ No minimum load current required for each channel ■ Wide operating temperature range: -20 to +70℃ ■ Can be used as a dual-output power supply by connecting CH2 and CH3 in series ■ Obtained UL/CSA/EN62368-1 for information processing equipment applications and IEC60601-1 Ed.3 for medical international standards *For more details, please refer to the PDF document or feel free to contact us.

• power supply

The "CCG Series (1.5W/3W)" is an ultra-compact, isolated DC-DC converter with a wide input voltage range. It allows for space-saving on the mounting area, and offers three types of input voltage ranges: 4.5–18VDC, 9–36VDC, and 18–76VDC. Additionally, we also offer a "15W/30W" model with a six-sided shield structure designed to consider noise. 【Features】 ■ Ultra-compact & space-saving mounting area ■ Wide operating temperature range: ambient temperature -40℃ to +100℃ ■ Mounting terminal types ・ SMD type (suitable for reflow soldering) ・ DIP type (suitable for flow soldering) ■ Voltage withstand (between input and output, for 1 minute) ・ 1,500VDC or 1,000VAC * For more details, please refer to the PDF materials or feel free to contact us.

• converter

The "GXE600" is an embedded power supply capable of constant voltage and constant current control, equipped with communication functions. It enables serial communication (RS-485) between the customer's device and this product. Real-time status monitoring allows for preventive maintenance, changes to power command values, and setting of protection functions. Abnormal input and output voltages are notified through AC fail signals and power fail signals, contributing to the safe shutdown of the device. 【Features】 ■ Natural air cooling 600W / Ensured quiet operation, reduced risk of foreign object intake, extended lifespan ■ Expected lifespan of over 10 years (ambient temperature: +40°C) ■ Enables serial communication (RS-485) between the customer's device and this product ■ Preventive maintenance through real-time status monitoring, possible changes to power command values and setting of protection functions ■ Capable of constant voltage (20-120%) and constant current (20-100%) control ■ Dedicated free software GXE-Access available *For more details, please refer to the PDF document or feel free to contact us.

• power supply

The "DRJ Series" is a unit-type AC-DC switching power supply specifically designed for DIN rail mounting. In addition to the conventional models of 15W, 30W, 50W, and 100W, new 120W and 240W models have been added to the lineup. It supports compact size, high efficiency, and peak loads of up to 120% of the maximum output current (only for DRJ120 and DRJ240). In addition to block terminals (screw type) for input and output connections, we also offer European terminals with spring clamp type, which have seen increasing demand in recent years. 【Features】 ■ Compact design considering the height and width of control equipment ■ Lineup of world-standard European terminals (spring clamp type) ■ European terminals are spring-type, eliminating the need for torque management, and there is no concern about screws loosening due to vibration ■ Complies with various safety standards and has obtained EN62477-1 OVCIII (Overvoltage Category III) certification *For more details, please refer to the PDF document or feel free to contact us.

• power supply

We would like to introduce our screwless terminal blocks for relay use. Starting with the "SL-4500 series," a two-piece terminal block compatible with stranded wires up to 2mm², we also offer the compact "ML-7000 series," which is small and compatible with stranded wires up to 2mm², as well as the "ML-7000-ME series," a conversion connector compatible with solid wires from Φ1.6 to Φ2.0mm. These products can be used in a wide range of fields, including FA industrial systems, information and communication, environmental applications, and security. 【Product Lineup】 ■ SL-4500 series ■ SL-4000 series ■ ML-7000 series ■ ML-7000-ME series ■ ML-3000 series ■ ML-1700 series *For more details, please refer to the PDF document or feel free to contact us.

• Terminal Blocks

The "SL-6000/8000 series" is a screwless terminal block that allows for flexible combinations. We offer the "SL-6000 series," which corresponds to a terminal pitch of 5.08mm for universal boards, and the "SL-8000 series," which is a panel-mount type that can be mounted with a single touch. These can be used in controllers, educational materials, measuring instruments, and more. Additionally, we provide an optional plate "SL-8000-EP" that can be attached to both ends of the "SL-8000" to cover the gaps of the mounting holes. 【SL-6000 Series Specifications (Excerpt)】 ■ Rated: 300V-10A ■ Compatible wire for rated current: - Solid wire: Φ1.2mm (AWG16) - Stranded wire: 1.25mm² (AWG16) *For more details, please refer to the PDF document or feel free to contact us.

• Terminal Blocks

The "SL-4500/4000 series" is a reusable terminal block. We offer the "SL-4500 series," rated at 300V-10A, compatible with stranded wires up to 2mm², and the "SL-4000 series," rated at 300V-5A, compatible with multi-pole stranded wires up to 1.25mm². Easy wiring is possible in three steps. No special tools are required, making it suitable for a wide range of wire materials, with various applications such as sensors for conveyors and machine tools. 【Features】 ■ No special tools required ■ Reduced working time ■ Wide range of wire compatibility ■ Reusable ■ Button lock *For more details, please refer to the PDF document or feel free to contact us.

• Terminal Blocks

We would like to introduce the DIN rail stopper 'SA-1030' that we handle. It can be used for screwless terminal blocks and fuse holders. The rail width is for 35mm, in a top hat shape, and the main material is steel with plating (zinc plating with trivalent chromate). Please feel free to contact us if you need any assistance. 【Specifications】 ■ Rail width: For 35mm, top hat shape ■ Main material ・Steel ・Plating: Zinc plating with trivalent chromate *For more details, please refer to the PDF document or feel free to contact us.

• Terminal Blocks

We would like to introduce our relay screwless terminal block, the "ML-7000 Series." We offer the compact "ML-7000," which allows for easy wiring with button operation, the "ML-7000-ME," which supports single wires with diameters of φ1.6 to φ2.0mm, and the fixed mountable "ML-7000-PM." The "ML-7000-ME" is convenient for cable extension and conversion. This series is widely adopted across various industrial sectors. 【ML-7000 Specifications (Excerpt)】 ■ Rated: 300V-10A ■ Contact Resistance: 20mΩ or less ■ Compatible Wire Specifications ・Solid Wire: Φ1.2mm (AWG16) ・Stranded Wire: 1.25mm² (AWG16) *For more details, please refer to the PDF document or feel free to contact us.

• Terminal Blocks

The "CAX-AD100" is an alcohol detector that supports two-way measurement using both straw and open blow methods. It employs a highly reliable, high-sensitivity, and high-quality sensor made in Japan. The response is quick, allowing for rapid and highly accurate measurements. Additionally, the sensor is heated with a heater to promote reactions, and further heating removes dirt and impurities attached to the sensor. 【Features】 ■ Utilizes high-precision, high-sensitivity, and high-quality sensors made in Japan ■ Supports two-way measurement using straw and open blow methods ■ Certified by the Alcohol Detection Device Association ■ Easy operation and measurement with electronic sounds, LED lamps, and digital display ■ Stylish design and compact construction ■ Long-lasting sensor with a lifespan notification feature for up to 5,000 uses *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

The "UBZ-LS27SET" is a specific low-power transceiver that does not require a license or qualification. It comes with a battery pack and charger included from the start, eliminating the hassle of purchasing options and allowing for immediate use. The main unit is treated with antibacterial and antiviral processing, and it has dustproof and waterproof performance rated at IP54. This product features a "battery save function" for long usage and a "battery level display function" that allows for easy checking of battery status. 【Features】 ■ Compatible with standard 2-pin connector options ■ High-output speaker with 400mW ■ Expanded communication area, compatible with repeaters (repeaters sold separately) ■ Dustproof and waterproof performance: IP54 rated ■ Antibacterial and antiviral processing (only for the transceiver main unit) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Hook and Loop Tape" handled by BuhinDana. The mushroom-shaped hooks interlock strongly and hold firmly. The size is 25×100mm each, and the usable temperature range is -20 to 100°C. It can be effectively bonded to materials such as aluminum, ABS resin, PP (polypropylene), and acrylic. Please feel free to contact us when you need it. 【Features】 ■ Strong interlocking with mushroom-shaped hooks ■ Compatible with large textured surfaces ■ One piece each of male and female ■ Size: 25×100mm each ■ Usable temperature range: -20 to 100°C ■ Weight: 10g *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables

The "Gyro Star" is a robot that moves along a single rail while maintaining balance without falling off. The course that this product travels on includes a 3-rail switch to change the direction of travel, a cross switch, and a seesaw rail that moves like a seesaw, allowing for various course layouts to be created. In addition to this, we offer various educational materials such as "Wide FM Hakoraji," "Wide FM Radio," and the "Easy LED Series." 【Features】 ■ Runs balanced on a single rail ■ Comes with rails that can be rearranged into various layouts - 3-rail switch, cross switch, seesaw rail ■ Experience the mysterious "gyro effect" *For more details, please refer to the PDF document or feel free to contact us.

• others

The "T360FD" is a tweeter that employs the Folded Diaphragm method. The magnetic circuit and housing that support the diaphragm are designed with careful consideration of not only frequency characteristics and standards but also the acoustic state of the finished product, taking into account shape, dimensions, and materials. To fully demonstrate acoustic performance, gold-plated terminals are used for the input terminals, and a wire with gold-plated Faston terminals is included for connection. 【Features】 ■ Adopts Folded Diaphragm method ■ Designed with careful consideration of shape, dimensions, and materials to prioritize the acoustic state of the finished product ■ Uses gold-plated terminals (#205 t0.8) for the input terminals ■ Includes a wire with gold-plated Faston terminals (#205 t0.8) crimped for connection (core wire of SFC103) *For more details, please refer to the PDF document or feel free to contact us.

• Sound Parts

The "FU-500/601" is an automatic soldering unit suitable for LCIA construction. The "FU-500" can be operated with simple I/O connections and can be connected to single-axis or multi-axis robots according to the application, enabling the automation of soldering. Additionally, the "FU-601" is equipped with two types of ultra-high output: 300W and 140W, which help improve soldering quality and reduce initial and running costs. 【FU-500 Features】 ■ Accurate solder supply ■ Compatible with solder diameters from φ0.3 to 1.6mm ■ Two types of feeder units (straight type and L-type) ■ Easy adjustment of solder supply position ■ Standard equipment for solder ball scattering prevention ■ Detection of solder supply errors *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

The "HU-200" is an all-in-one soldering robot that has a solder feeding controller and programming software built into the main body of the robot. All operations, such as solder supply amount and heating time, can be managed collectively using the standard-equipped tablet PC. The tip cleaner uses a brush type, effectively removing not only leftover solder from the tip but also burnt carbon from the flux. 【Features】 ■ Comes standard with easy programming software ■ Easy teaching with EPS (Easy Positioning System) ■ Convenient work origin and palletizing function for reducing teaching time ■ Prevents malfunctions by reading 2D codes ■ Standard feeder equipped with solder ball and flux splash prevention features *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

The "FX-971/972" is a multi-station equipped with 100W of power in a compact body, capable of handling a wide range of soldering tasks. With improved sensor sensitivity and a design that smoothly transfers heat from the heater to the tip, the tip temperature stabilizes, enabling better soldering. In addition, we offer a variety of products such as the "FX-9702 N2 Soldering Iron" and "FX-9705 Hot Tweezer," so please feel free to contact us. 【Features】 ■ Space-saving design that is compact and high-powered ■ Approximately 40% reduction in cycle time ■ Tips that accommodate various tasks ■ High visibility display ■ Improved visibility and operability with angle adjustment ■ Easy settings with four buttons *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

This catalog features a wide range of solder-related products handled by our company. We introduce many items including the "FX-971 100W 1-Port Station," "FX-9701 Soldering Iron," and "FX-9706 Micro Hot Tweezer." Additionally, we have included "Station, Iron Unit, Iron Stand, and Iron Tip Compatibility List" and "T39 Series Tip List." We encourage you to take a look. [Contents (Excerpt)] ■ Station, Iron Unit, Iron Stand, and Iron Tip Compatibility List ■ FX-971 100W 1-Port Station ■ FX-972 200W 2-Port Station ■ FX-9701 Soldering Iron ■ FX-9702 N2 Soldering Iron *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

The "TJC Series" we handle is a waterproof connector that uses rubber packing with excellent oil resistance. It features a shaft seal structure at the mating part, and the coupling nut and clamp nut are designed with consideration for tightening with tools. Made of brass, it is used in equipment in harsh environments such as salt damage areas and the steel industry. Please feel free to contact us when you need assistance. 【Features】 ■ The coupling nut and clamp nut are designed with consideration for tightening with tools ■ It has a shaft seal structure at the mating part ■ Uses rubber packing with excellent oil resistance ■ The receptacle mounting hole is common with NJW ■ Replacement from NJW is also possible * For more details, please refer to the PDF document or feel free to contact us.

• Waterproof Connector

The "STI Series" is a waterproof connector with a shaft seal structure at the mating part. The shell is made of stainless steel. Additionally, silicone rubber, which has excellent cold resistance, is used for the gaskets (only for 25STI). It is adopted in medical, pharmaceutical, and food-related equipment, and cable assembly support is also available. Please consult us separately. 【Features】 ■ Gaskets made of silicone rubber with excellent cold resistance (only for 25STI) ■ Shaft seal structure at the mating part ■ Cable assembly support is also available ■ Waterproof function during coupling: equivalent to IP67 ■ Locking method: screw lock ■ Wiring method: soldering *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof Connector

The "BWC Series" is a waterproof connector that can be attached and detached with just a twist of the wrist, using a bayonet lock mechanism. It is made of lightweight aluminum and is also robust. The rotation angle of the lock nut has been reduced to improve operability (compared to the BLW series). It features alignment marks that indicate the correct insertion position of the connector. Please feel free to contact us if you have any inquiries. 【Features】 ■ Compliant with RoHS Directive ■ Waterproof function when connected: equivalent to IP-67 (IP-68 class also available upon request) ■ Reduced insertion and extraction force of the connector due to bayonet structure ■ Alignment marks indicating the correct insertion position of the connector ■ Improved operability by reducing the rotation angle of the lock nut (compared to the BLW series) *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof Connector

We offer "10 Gigabit Compatible Automated Soldered LAN Cables." Due to the soldering process, the connection points are alloyed, resulting in improved stability of resistance values, enhanced vibration resistance, increased tensile strength, and better resistance to aging. These cables are suitable for devices with moving parts, such as robots and IP cameras. You can choose from three types: "SFTP type," "UTP type," and "Flat type," according to your needs. 【Features】 - Excellent vibration resistance, stability of resistance values, and tensile strength - Highly reliable, triple-checked - Continuity test, Fluke performance test, 4-terminal low resistance measurement - Supports a wide transmission range with reliable Category 6A - Equipped with a flexible cover to prevent tab breakage *For more details, please refer to the PDF document or feel free to contact us.

• LAN/Optical cable

We offer the IP68 waterproof connector "THB389 Series." We have options such as the "THB389E Series," which allows for easy connection and disconnection with just a push of a finger, and the compact "THB381 Series," which has a diameter of 14mm and a total length of 90mm. Additionally, we have a wide range of products including the "THB381E Series," "THB387L Series," and "THB387LE Series," so please feel free to contact us. 【Product Lineup (Excerpt)】 ■ One-touch connection waterproof connector THB389 Series ■ One-touch connection panel mount waterproof connector THB389E Series ■ Micro waterproof relay connector THB381 Series ■ Panel mount micro waterproof relay connector THB381E Series ■ UL certified waterproof relay connector THB387L Series *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof Connector

We would like to introduce our conductive tape, the 'CUT/ALT series'. It is flexible, making wrapping and sticking tasks easy. Since it uses a conductive adhesive, it ensures reliable conductivity without reducing the shielding effect. Additionally, we also offer conductive copper/aluminum sheets, the "CUTS/ALTS series," which are easy to use in B5 and A4 sizes. 【Features】 ■ Low-cost type ■ Flexible and easy to apply ■ Uses conductive adhesive ■ Ensures reliable conductivity without reducing the shielding effect ■ Copper foil tape CUT can be soldered to metal foil surfaces *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

We handle the Takachi-made conductive screws 'EV Series'. The back of the screw has protrusions that scrape the anodized layer or paint layer on the surface of the company's anodized or aluminum-coated products, allowing contact with the base material. They can be used in various products. In addition, we also offer fall prevention sleeves and screws "PLS, MTS, PM Series" that have surface treatments such as trivalent black chromate and nickel plating. 【Specifications (excerpt)】 ■EV3-5S 　・Material: Iron 　・Applicable cases: YM, MB, etc. ■EV4-5S 　・Material: Iron 　・Applicable cases: BDN, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce our free-size cases, the "UCS/UCGS series." The "UCS series" is a product with excellent strength, using aluminum extrusions for the top and bottom covers. The width and height dimensions can be selected in 1mm increments, and the depth can be chosen from 13 sizes. A silver color has been added, allowing you to choose from 7 types of color specifications. Additionally, the "UCGS series" comes with flexible silicone corner guards, providing impact resistance and non-slip properties, also serving as rubber feet. 【Features】 ■ Free-size case UCS series - A product with excellent strength using aluminum extrusions for the top and bottom covers - Width and height dimensions can be selected in 1mm increments, with depth available in 13 sizes - A silver color has been added, allowing selection from 7 types of color specifications *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Chassis with Cover" that we handle. We offer a wide range of products including the low-cost aluminum chassis "T Series" with a flat cover, the "TCF Series" with a free size that makes it easy to attach and detach the cover, and the stainless steel (SUS304) case "TCS Series" that excels in corrosion, salt, and chemical resistance. In addition, we also provide the nut-inserted adhesive spacers "AST Series" and the adhesive rubber feet and molded type "B Series." 【Features】 ■ Aluminum Chassis with Cover T Series - Made with aluminum plates that have conductive treatment on the back side - The inner surface is conductive, making it easy to connect to ground or earth - Easy to attach and detach the cover, facilitating equipment installation and maintenance - The corner parts have a unique fitting structure that provides sufficient strength without welding - Available in a total of 12 sizes *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Dry X EF MODEL SX-S350" we handle is a static electricity prevention agent that is quick-acting and has excellent durability. It is highly effective against difficult-to-discharge negative charge static electricity. It is non-toxic and can be safely used with food packaging equipment. Being a dry type, it does not wet the objects and leaves no stickiness. It resolves various static electricity issues with just one spray. 【Features】 ■ Quick-acting with excellent durability ■ Dry type, so it does not wet objects and leaves no stickiness ■ Non-toxic and safe for use with food packaging equipment ■ Resolves various static electricity issues with just one spray *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables

The "Phil Black MODEL BF-L300" is a product that can enhance electrical insulation, protection, and water resistance by applying it to circuit boards and electronic components. It cures at low temperatures in the same time as at room temperature. As a two-component, room temperature curing type, it can be used on heat-sensitive components without the need for heating. With its low viscosity, it offers good workability and can fill in details, and since it does not cure quickly after mixing the two components, it allows for a more relaxed working pace. 【Features】 ■ Enhances electrical insulation, protection, and water resistance by applying it to circuit boards and electronic components. ■ As a two-component, room temperature curing type, it can be used on heat-sensitive components without the need for heating. ■ Allows for a relaxed working pace as it does not cure quickly after mixing the two components. ■ Cures at low temperatures in the same time as at room temperature. *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables

We would like to introduce our "Shortened, Resin, and Metal Type LED Indicator Lights." We offer two types: metal frame type and molded frame type. Additionally, we also have types without resistors, such as "DOH-6MTS" and "DO-8HJ," so please feel free to contact us when you need them. 【Product Lineup (Partial)】 ■DOH-7T ■DOH-8F ■DOH-9TB ■DO-10HJT ■DO-11TP *For more details, please refer to the PDF document or feel free to contact us.

• Indicator Light

The "FT Series" is a touch panel that utilizes transparent conductive film technology with a resistive film method. By combining it with various display devices such as LCD panels and plasma EL, it allows for easy input operations in a dialog format, even for those who are not specialized operators or do not have computer knowledge. It offers high design flexibility in terms of input methods (digital, analog), sizes, etc., and is a proven method due to its relatively low cost. 【Features】 ■ Available in two types: analog and digital ■ Standard adoption of metal tails ■ Non-glare surface treatment ■ ANR film adoption ■ Narrow bezel support *For more details, please refer to the PDF materials or feel free to contact us.

• Touch Panel

The "FM Series" is a sheet keyboard switch suitable for the production of small quantities of various custom products. Depending on the presence or absence of a metal disk, you can choose the click feel. Installation into the housing is completed simply by sticking it with the adhesive on the back. By implementing chip LEDs corresponding to each key, it becomes easy to display the status of the keys while also allowing for a thinner design of the device. (Point light type) 【Features】 ■ Terminal pitch of 1.0mm ■ Miniaturization of applicable connectors ■ Contributes to reducing the mounting space for control boards ■ Responds to customer requests with total design, etc. ■ A total of 20 models are available *For more details, please refer to the PDF document or feel free to contact us.

• keyboard

The "FK Series" is a sheet keyboard switch equipped with both illuminated and non-illuminated types. By using high-performance mechanical key switches, it provides a reliable operational feel and good tactile feedback. Its sealed structure offers excellent environmental resistance, including dustproofing. The contact area has a long lifespan and high contact stability, and it can accommodate products where the switch circuit and LED circuit share a common connection (made to order). 【Features】 ■ Excellent environmental resistance, including dustproofing ■ Mechanical key switch: high performance with a sealed structure ■ Provides a reliable operational feel and good tactile feedback ■ The contact area has a long lifespan and high contact stability ■ Can accommodate products where the switch circuit and LED circuit share a common connection (made to order) *For more details, please refer to the PDF document or feel free to contact us.

• keyboard

The "TP02 Series" is an analog type 4-wire touch panel that can be used for a long time even in devices with high operating frequency. It achieves reliable response with a light press, requiring less than half the input load compared to our conventional models. It can detect continuous and quick operations without missing any inputs. It supports narrow bezels for LCDs, maintaining the design integrity of the device, and the film surface has a non-glare treatment that reduces reflections from fluorescent lights and other sources. 【Features】 ■ High durability with 10 million keystrokes ■ Improved contact stability ■ Smooth operation feel with light touch input ■ Wide range of input methods ■ Non-glare surface treatment *For more details, please refer to the PDF materials or feel free to contact us.

• Touch Panel

The "TMC Series" is a media converter suitable for outdoor use in a box. It achieves a guaranteed operating temperature range of -20 to +60°C. The "TMC102 Series" allows switching between store-and-forward mode and cut-through mode using DIP switches. With a compact size of 51×71×19.5mm, it comes standard with a strain relief clamp on the DC jack side. 【Features】 ■ The subrack chassis achieves -10 to 60°C ■ A variety of options available for wall mounting and DIN rail mounting ■ Compact size ■ Space-saving design allows for installation in various locations ■ Uses a power disconnection prevention code *For more details, please refer to the PDF document or feel free to contact us.

• converter

The "DC18-27V" is a switching hub that can output PoE (15W DC48V) with a DC24V input. Since it can directly use the commonly wired DC24V, there is no need for voltage boosting with a DC-BC converter. Additionally, its waterproof design allows for installation in harsh environments, enabling various wiring methods. 【Features】 ■ Wide temperature range from -30℃ to +70℃ ■ Robust design ■ Suitable for wiring in railway vehicles ■ Achieves gigabit communication and PoE power supply by adopting M12-X connectors ■ Capable of notifying various abnormalities by outputting alarm signals *For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs

We would like to introduce the "HT Series" that we handle. This series features a lug terminal (solder terminal) type with an input of 100V and an output voltage of 70V or less, allowing for fine-tuning of output voltage and current. In addition, we offer a variety of products including the "HTR Series," which is a power transformer with an input of 100V and two output circuits, as well as the "HTW Series," which consists of small-capacity power transformers with an output power of 500mA or less. Please feel free to contact us when you need assistance. 【Lineup (Excerpt)】 ■HT-601 ■HT-62 ■2H-605 ■HT-1225 ■BH124-1 *For more details, please refer to the PDF document or feel free to contact us.

• transformer

We would like to introduce our "Portable/Handy Case Transformer." The "CD220 and CD240 series" are conversion transformers designed for using measuring instruments and tools rated for 100V in regions with 220V to 240V. We also offer the "CU-S series," which is prepared for using overseas equipment with different voltages domestically, as well as conversion plugs that accommodate overseas outlet shapes. Please feel free to contact us when you need assistance. 【Product Lineup】 ■ CD110 and CD120 series ■ CD220 and CD240 series ■ CU-S series ■ KS series ■ Conversion adapters *For more details, please refer to the PDF document or feel free to contact us.

• transformer

The "TYC Standard Case" is a product designed for the purpose of selling transformers that are processed and assembled for installation on a stationary floor surface or for mounting stationary equipment in indoor environments with normal temperature and humidity. In addition to orders for transformers incorporated into the case, orders for the case alone are also possible. For standard orders, the terminal block is of the drawer type. Additionally, we offer processing for the installation of various components (SW, NFB, ELB, outlets, input cables, etc.) as options. Please feel free to contact us when you need assistance. 【Lineup (excerpt)】 ■TYC-100 ■TYC-300 ■TYC-01K ■TYC-03K ■TYC-05K *For more details, please refer to the PDF document or feel free to contact us.

• transformer

We would like to introduce the "NA Series" that we handle. By combining "isolation transformer" and "noise reduction function," we achieve superior noise reduction characteristics compared to standard isolation transformers. For those who feel uneasy with just a regular isolation transformer but want to keep costs down, this is a new standard model for noise countermeasures that meets your needs. 【Features】 ■ "Isolation transformer" + "Noise reduction function" ■ Achieves superior noise reduction characteristics compared to standard isolation transformers ■ Wiring section adopts terminal block method ■ Customizable to your desired voltage ■ Contains no substances subject to RoHS Directive *For more details, please refer to the PDF materials or feel free to contact us.

• transformer

We would like to introduce the "LD21 Series" that we handle. By adopting taps that are frequently used in the "SD21 Series," we have achieved cost reduction. When 180V is input into a 200V tap, the 110V tap can be used as a 100V tap. We also offer a variety of voltage taps with rich capacity configurations, such as the "SD41 Series," and the "SD51 Series," which supports input voltages of 480V and 500V. 【Features】 ■ Single-phase, multi-winding, 50/60Hz ■ Withstand voltage AC 1.5kV ■ Applicable standard for 1kVA or less JIS C-6436 ■ Electrostatic shield between primary and secondary ■ Contains no substances subject to RoHS Directive (10 substances) *For more details, please refer to the PDF materials or feel free to contact us.

• Power Supplies

The "LB/ELB-E series" is equipped with a breaker on the primary side, allowing for the protection of the transformer itself and the secondary side load devices. In the event of abnormal current flowing through the secondary side load devices or electrical equipment, it is possible to automatically stop the power supply. Additionally, a blue LED power indicator is provided on the secondary side of the transformer, and it can be easily reset by pressing the breaker switch. 【Features】 ■ Equipped with a breaker on the primary side ■ Protection of the transformer itself and secondary side load devices is possible ■ Can automatically stop the power supply in the event of abnormal current ■ Easy to reset by pressing the breaker switch ■ Blue LED power indicator is provided on the secondary side of the transformer *For more details, please refer to the PDF document or feel free to contact us.

• transformer