ニュージャパンヨット List of Products and Services

● A door holder that keeps the cargo door open. ● Its rounded shape does not compromise the vehicle's design. ● It has a strong holding power, securely holding even heavier doors. * The holding power can be adjusted simply by spraying silicone spray or lightly sanding the ball receiving hole.

• Other Auto Parts

●This is a stretchable rubber string that can be used to hold doors and gates or to stabilize heavy objects. ●It is useful when shock cords are unreliable. The fixing power can also be adjusted due to the holes. ●The maximum stretch length is about 5 cm. ●Please attach the hold clip at any desired position to secure it.

• Other Auto Parts

● This is a door holder that is convenient for half doors and door stops. ● The knob part rotates and stops with a click every 90 degrees. ● The tip nose part is about 3mm "raised" from the mounting surface, allowing for the insertion of stainless plates or similar items.

• Other Auto Parts

●This is a slide-open ventilator that can be used for ventilation only when needed. ●Opening and closing is as simple as twisting the knob in the center. Fine adjustments are also possible. ●It does not come with an insect net, so it is intended for indoor ventilation.

• Other Auto Parts

● This is a slide-open and close ventilator that can be used only when you want to ventilate. ● It has an outer cover with an insect mesh, allowing for the intake of outside air. ● Opening and closing is as simple as sliding the central knob. ● Installation involves sandwiching the outer cover (with M4 bolts and nuts) and the indoor ventilator against the wall, then tightening the nuts from the inside. It accommodates wall thicknesses up to 30mm. ● Two nut hole cover plugs are included.

• Other Auto Parts

● This is an AC input socket on the vehicle side for connecting an external 100V power supply. ● The stylish round lid does not compromise the vehicle's design. ● When the plug is inserted, the lid of the plug securely engages with a projection at the back, ensuring it does not come out easily. ● To remove the plug, simply press down the lever at the front, which lifts the lid at the back, allowing for easy removal. ● The round shape allows for installation holes to be drilled using a hole saw (hole diameter: φ103-105mm). ● The cover on the back of the main unit can be easily removed, making wiring work straightforward. * The plug (sold separately) is available here. * The white cover becomes difficult to remove once attached to the main unit. Please ensure to attach the cover only after the main unit is installed on the vehicle.

• Other Auto Parts

● This is a slide-open and close ventilator that can be used only when you want ventilation. ● Opening and closing is as simple as twisting the knob in the center. Fine adjustments are also possible. ● Even when completely closed, about 30% of the ventilation area remains on both sides. ● Its fine construction also prevents the intrusion of insects.

• Other Auto Parts

● This is a convenient filler and cap for the water supply port of a camper van. ● The filler (vehicle side) and cap (with key) are not sold as a set; they are sold separately. ● To lock the cap, press it firmly against the filler and twist it, then turn the key to the right. This will prevent the cap from being removed, as it will only rotate. ● To unlock, turn the key to the left until you hear a click. The cap will no longer rotate and can be removed by twisting. The filler and cap are not sold as a set; they are sold separately.

• Other Auto Parts

● This is a small ventilator that is convenient for ventilation and air release, and it does not stand out when attached to furniture. ● Its round shape allows for easy installation by simply placing it into a hole (φ32) made with a hole saw.

• Other Auto Parts

It is an indoor ventilator with a large ventilation area.

• Other Auto Parts

- It features a cap with a lid for the water intake (blue cap) and fuel intake (black cap) that prevents the cap from being exposed and does not compromise the elegant appearance of the camper. - The cap is attached with a string, so there is no worry about it falling off or getting lost when opened. - The fuel intake is compatible with gasoline. - To lock it, press the cap firmly against the filler and twist it, then turn the key to the right to lock it; the cap will just spin and cannot be removed. - Turning the key to the left until you hear a click will unlock it. The cap will no longer spin and can be removed by twisting. * The outer diameter of the hose joint for the water intake is φ32, and for the fuel intake, it is φ39.

• Other Auto Parts

●This is a replacement screen door latch set for RV entrance doors (screws included). ●It can be used for either left or right opening by reversing it.

• Other Auto Parts

● A secure double lock that can be locked from inside the vehicle. ● Comes with 2 keys. * The "lock receiving plate" on the door frame side is not included as it is an aftermarket part. * Mounting screws are also not included. (As shown in the photo)

• Other Auto Parts

● This is a magnet-type door stopper that is convenient for holding small doors if the body is made of steel. ● It has a rounded shape that is less likely to scratch the body. ● It can also be used with FRP or aluminum bodies by adding another one on the body side to create a pair. ● Comes in a set of 2 pieces. *Please be cautious when using it with heavy doors or in strong winds.*

• Other Auto Parts

● The door can be locked, so you can feel secure against pranks. Once you open the door, you can easily open the water supply port by simply twisting it with your hand. ● Comes with a hose joint that can connect to the air release hose from the tank. ● The diameter of the water supply hose joint is φ40. The air release is φ10mm.

• Other Auto Parts

● This is a roof air conditioner for cabs (driver's and passenger's seats of trucks and buses) powered by DC24V from the global air conditioner/refrigerator manufacturer Vitrifrigo. ● It adopts the latest compressor technology, achieving a high cooling capacity of 6,000 BTU (1512 Kcal/1758 W) while minimizing power consumption. ● The ultra-thin aerodynamic design, only 135mm high, also contributes to fuel efficiency. The installation angle can be adjusted up to 30 degrees. ● The indoor and outdoor units are integrated into a single body, making installation simple and easy. ● It has characteristics that prevent interference from electromagnetic waves, allowing for stable operation. ● It has passed tests under harsh conditions of 43 degrees Celsius and essential vibration resistance tests for vehicles. - 6-speed fan speed switching - 3 operating mode switching (Auto: maximum performance of 1750W / Eco: long operation for over 14 hours / Night: quiet operation) - Comes with a remote control (with ON/OFF timer function) - Air outlet with 3 adjustable louvers - Battery save function - Tilt sensor included - Auto diagnostic function

• Vehicle body parts

We offer estimates for FRP shells (for light truck installations) and interior construction. Interior construction can be customized to meet your needs, such as for mobile sales vehicles or camper vans. We can also accommodate the installation of features like "large sales windows," entrance doors, and roof ventilators according to your intended use. There are two types of shell heights, with the "TALL type" achieving an interior height of approximately 172 cm. This allows for standing work inside, significantly improving usability. 【Features】 ■ Usable for mobile sales vehicles and camper van installations ■ Customizable to meet your requirements ■ Installation of features like "large sales windows," entrance doors, and roof ventilators is possible ■ Two types of shell heights available ■ The "STANDARD type" can be registered as a light vehicle by treating the shell itself as "cargo" ■ Interior furniture, water systems, and electrical wiring can also be accommodated separately *For more details, please refer to the PDF document or feel free to contact us.

• Other services

Our company specializes in interior construction for vehicles such as camper vans and mobile sales vehicles. As examples of camper van production, we have achievements in "light camper interiors," "overhead cabinets," and "plumbing work for water systems." Additionally, we also perform repairs on camper vans. Please feel free to contact us if you have any inquiries. 【Business Activities (Partial)】 ■ Manufacturing and sales of large ocean-going cruisers ■ Brokerage, purchase, and sale of used boats ■ Repair and maintenance of cruisers and dinghies ■ Design and construction of FRP products and wooden furniture ■ Interior work for camper vans and special vehicles *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

"Wrapull" is an automatic wrap-style toilet designed specifically for 12V vehicles, equipped with the film sealing technology from Rappon (Nihon Safety Co., Ltd.) and improved by Environmental Cloud Service Co., Ltd. for vehicle use. It is lightweight for installation in vehicles and features enhanced vibration-proof design. The toilet automatically seals waste after each use through thermal sealing, and the waste can be easily separated into individual packages, making post-processing hassle-free and maintenance simple. Additionally, no complicated installation is required, allowing for efficient use of space. 【Features】 - Adopts TOTO toilet seat for improved seating comfort - Equipped with film sealing technology from Rappon (Nihon Safety Co., Ltd.) - Lightweight with enhanced vibration-proof design - Automatically seals waste after each use through thermal sealing - Easy maintenance with individual packaging for waste separation *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "Can Compact 1 Burner Sink" is an integrated combination unit that reveals a compactly arranged 1 burner and a cylinder sink with a faucet when the glass cover is opened. It comes with a reliable flame-out safety device, and the 1 burner stove features automatic ignition with a single push button. It includes drainage fittings that can be used with either Φ19 or Φ25. 【Features】 ■ Width is 530mm ■ The hose nipple for use with the faucet is 3/8 inch ■ Optional drainage fittings (drain) are also available *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Wrapull Handy Battery for Wrappon." It is a rechargeable battery that provides peace of mind even during power outages. With this product, you can operate the Wrapull even in places where there is no power supply. Since it uses a lithium-ion battery, it can be recharged and used repeatedly. When not in use with the Wrapull, it can also be used for devices that require USB power. 【Features】 ■ Rechargeable for peace of mind during power outages ■ Lithium-ion battery ■ Can be recharged and used repeatedly *For more details, please refer to the PDF document or feel free to contact us.

• Secondary Cells/Batteries

We would like to introduce the "Submersible Pump (Reich) 19L" that we handle. It features a built-in non-return valve to prevent backflow of water. When directly connecting a hose, it is compatible with a φ10 hose. A strainer can be installed. The astonishing pumping capacity of 19L/min. offers power comparable to that of a pressure pump. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Water supply rate: 19L/min ■ Pressure: 1.1bar ■ 12V 35-45W *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "External Water Supply Connector (with Door)" is a water supply plug equipped with a pressure regulator that allows for direct connection to an external water supply in the camper's water supply piping system. It can handle high water pressure up to 12 bar and reduces it to 0.7 or 1.4 bar for camper use, ensuring that existing piping is not damaged. Additionally, it features a check valve to prevent backflow of water. 【Features】 ■ Easily detachable with a garden hose connector ■ Convenient for filling fresh water tanks ■ Case made of UV-resistant ABS material ■ Installation opening size is 160×70mm, with only a 70mm protrusion into the vehicle interior ■ The hose joint on the back is compatible with hoses of inner diameter φ10mm to φ12mm *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

We would like to introduce the "Can Compact 2 Burner Sink" that we handle. When you open the glass cover, a compactly arranged 2-burner and sink appear as an integrated combination unit. The 2-burner stove features piezoelectric ignition. Of course, it comes with a safety device to prevent accidental extinguishing. 【Specifications (partial)】 ■ Made of 304 stainless steel (satin finish) + tempered glass cover ■ 2-burner stove (for propane/butane gas) with piezo ignition ■ Power: 1000W + 1900W ■ Consumption: (73g/h + 127g/h) ■ Size: 765×355×100 + 50mm *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the KUPO Fuel and Water Tank Sender (Sensor) 'SFW-04' that we handle. It is a float-type sender (sensor) made with a SUS316 stainless steel shaft and a polyethylene float, compatible with various liquid tanks. It is available in lengths starting from 250mm, suitable for fuel tanks and water tanks of various depths. Please feel free to contact us if you have any requests. 【Ohm Values】 ■Empty: 240 Ohms ■Full: 30 Ohms *For more details, please refer to the PDF document or feel free to contact us.

• tank

We would like to introduce our product, the "G2 (for φ30 pipe)." This is a new specification bike holder for φ30 pipes, available in two colors: black and silver. The size refers to the center-to-center length between the pipes. Please feel free to contact us if you have any requests. 【Features】 ■ For φ30 pipes ■ Available in black and silver ■ Size refers to the center-to-center length between the pipes *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts

We would like to introduce the towbar cycle carrier 'Thule Epos' that we handle. Unlike typical towbar cycle carriers, it features independent fixing arms for each bicycle. It can be compactly folded for storage. Additionally, the 25cm spacing between bicycles helps prevent contact between them, and it accommodates bicycles with tire widths of up to 3.2 inches. 【Features】 ■ Tilt mechanism allows access to the vehicle trunk ■ Supports bicycles weighing up to 30kg ■ Equipped with independent fixing arms for each bicycle ■ Can be compactly folded for storage ■ 25cm spacing between bicycles helps prevent contact *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

The "THULE FatBike Rail (for Lift V16/Elite G2)" is a product that allows bicycles with wider tires to be transported using conventional bike carriers. It is compatible with Thule Excellent or Thule Elite G2. The rail can be slid left or right to be positioned in the most suitable location. Additionally, it fits wheel sizes of 3-5 inches and can be easily installed. 【Features】 ■ Compatible with Thule Excellent or Thule Elite G2 ■ Easy installation ■ Fits wheel sizes of 3-5 inches ■ 1.40m extra long rail *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

The "THULE Elite Van XT" is a product that does not require drilling holes in the vehicle body, as it is fixed using clamps and adhesive. It is designed for Sprinters manufactured after 2006. The height of the bike rail platform can be selected from three levels, allowing for an easy-to-use height. Additionally, the carrier body can be easily removed from the mounting plate, and the rubber seal strip ensures that the appearance is not compromised. 【Overview】 ■ Extension width: 3 levels ■ Maximum load capacity: 35kg for up to 2 bikes (not suitable for more than 3 bikes) *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

We would like to introduce the "Thule OutWay Platform" that we handle. It is secured to the vehicle with a steel cable using a torque wrench mechanism dial. The tire tray and arms ensure that the cycles are securely loaded. This rear door cycle carrier is primarily compatible with European hatchbacks and SUVs, and can carry a maximum of 2 cycles. 【Features】 ■ The tray can be folded when not carrying cycles ■ Comes with a lock ■ Ensures secure loading of cycles with the tire tray and arms ■ Secured to the vehicle with a steel cable using a torque wrench mechanism dial *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

We would like to introduce the "Thule Outway Hanging" that we handle. This rear door cycle carrier is designed primarily for European hatchbacks and SUVs, capable of carrying up to 2 bicycles. It securely attaches to the vehicle using a steel cable with a torque wrench mechanism dial, and ensures that the bicycles are firmly loaded with the tire tray and arms. 【Features】 ■ Includes a lock ■ The tray can be folded when not carrying bicycles ■ Ensures secure loading of bicycles with the tire tray and arms ■ Secures to the vehicle with a steel cable using a torque wrench mechanism dial *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

We would like to introduce the "Sport G2 (for Elite) 3rd Rail + Bike Holder (Optional)" that we handle. This is an additional bike rail for the Sport G2 Elite. By adding it, you can expand to accommodate 3 or 4 bikes. Additionally, the rail can slide left and right. Please feel free to contact us if you have any inquiries. 【Features】 ■ Additional bike rail for Sport G2 Elite ■ Can be expanded to accommodate 3 or 4 bikes ■ Rail can slide left and right ■ Maximum load capacity: 15kg *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

The "THULE Caravan A-Frame Smart" is a trailer bike carrier from THULE that has been elevated to a higher level of completeness in both strength and ease of use (Caravan A-Frame). It ensures flexibility that adapts to all types of A-frames and provides accessibility to the trailer. It features a new bike holder that quickly and securely grips the bicycle frame. Additionally, it has a lower platform that makes loading and unloading bicycles easier. 【Features】 ■ Easy loading and unloading of bicycles with a lower platform ■ Improved safety with a low center of gravity ■ Capable of carrying one electric bicycle *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

We would like to introduce the "THULE Super B 3rd Rail + Bike Holder" that we handle. This is an additional bike rail for the Super B. By adding this, you can carry a total of three bicycles. Additionally, one bike holder is included. Please feel free to contact us if you have any inquiries. 【Features】 ■ Additional bike rail for the Super B ■ Allows you to carry a total of three bicycles ■ One bike holder included *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

The "THULE Caravan A-Frame Super" is a bike carrier for trailers that has elevated the level of strength and ease of use to a higher degree of perfection (Caravan A-Frame). It features a new bike holder that quickly and securely grips the bike frame. The platform is designed to be lower for easier loading of bicycles. This product ensures flexibility to fit all types of A-frames and accessibility to the trailer. 【Features】 ■ Can be expanded to carry 3 bikes with additional bike rails and holders ■ Lower platform makes loading and unloading bicycles easy ■ Low center of gravity enhances safety ■ Can carry up to 2 electric bikes ■ Bike holder comes with a theft prevention key lock *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

We would like to introduce the "THULE 2 Bike Lift V16" that we handle. With a crank handle operation, the rail can be raised and lowered by 70 cm, making it safer and easier to load and unload bicycles. The adjustable width is 70 to 95 cm, and the maximum load capacity is 50 kg. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Installation location: Rear wall ■ Number of bicycles that can be loaded: 2 (3) ■ Maximum weight of each bicycle: 30 kg ■ Maximum tire width: 2.75 inches ■ Distance between bicycles: 30 cm *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

We would like to introduce the 'THULE Elite Van XT (Aluminum Color)' that we handle. It is fixed with clamps and adhesive, so there is no need to drill holes in the vehicle body. The bike rails are spaced 20 cm apart, allowing for ample room to load bicycles. This is a dedicated bike carrier specifically designed for Euro campers with a "Hinged Door" rear, such as the "Ducato." Please feel free to contact us if you have any inquiries. 【Features】 ■ The height of the bike rail platform can be selected from three levels ■ The carrier body can be easily removed from the vehicle mounting plate ■ The rubber seal strip does not compromise the appearance ■ Compatible with Fiat Ducato/Citroen Jumper/Peugeot Boxer models from 2007 onwards *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

The "THULE Elite G 2-Bike Short" is a new type of lower mounting rail that distributes the load on the vehicle body. With an oval (egg-shaped) cross-section frame, it achieves a maximum load capacity of 60 kg, making it one of the strongest in its series. It is a bike carrier with high quality, design, and functionality. Additionally, it is compatible with vehicles that have limited installation space. By adding rails, it can be expanded to accommodate 3 or 4 bikes. 【Features】 - The mounting screws are concealed, providing a beautiful appearance while also being effective against theft. - Comes with a new bike holder that quickly and securely grips the bicycle frame. - Can be expanded to accommodate 3 or 4 bikes with optional additional bike rails and holders. *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

The mounting screws are hidden, providing a beautiful appearance while also being effective for theft prevention. The bike rail can move left and right, making it easy to position bikes without interference. Additionally, the adoption of an oval (egg-shaped) cross-section frame achieves a class-leading load capacity of 60 kg. This bike carrier boasts a high level of quality, design, and functionality. 【Features】 ● A new type of lower mounting rail that distributes the load on the vehicle body. (Upper mounting rail is optional) ● The mounting screws are hidden, providing a beautiful appearance while also being effective for theft prevention. ● Quickly and securely grips the bicycle frame. *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

The "bike cover" is made of lightweight PVC with a rubber coating, designed to protect bicycles from rain, dirt, and theft. It can be washed with water, allowing for easy cleaning and reuse. The installation is simple and secure with the elastic cord and steel hooks. Additionally, it features an integrated transparent sleeve for warning display plates, and comes with a carry bag for neat storage. 【Features】 ■ Material: PVC ■ Washable ■ Integrated transparent sleeve for warning display plates (50×50 cm) ■ Comes with a carry bag for neat storage *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts

We would like to introduce our product, the "Bike Holder G2 with Key Lock." This is the initial version of the bike holder for φ30 pipes. The size refers to the center-to-center length between the pipes. Please feel free to contact us if you have any inquiries. 【Features】 ■ For φ30 pipes ■ Size refers to the center-to-center length between the pipes *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

We would like to introduce our "Mounting Rail for Veloslide 140cm." This mounting rail is necessary for the installation of the "Veloslide." With this product, you can slide the main unit horizontally. Additionally, it allows you to leave only the rail in place while removing the main unit. You can cut it to the desired length as needed. 【Features】 ■140cm (set = 3pcs) ■Allows for the main unit to be removed while leaving only the rail ■Can be cut to the desired length as needed *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

We would like to introduce the "Mounting Rail for Veloslide 70cm" that we handle. This is the mounting rail necessary for the installation of the "Veloslide," which allows the main unit to slide horizontally. You can cut it to the desired length as needed. It is also possible to leave only the rail and remove just the main unit. Please feel free to contact us if you have any requests. 【Features】 ■70cm (set = 3 pcs) ■Necessary for the installation of the "Veloslide" ■Allows the main unit to slide horizontally *For more details, please refer to the PDF document or feel free to contact us.

• Vehicle body parts

The "THULE Veloslide" is a convenient sliding rack for loading bicycles into garage compartments (cargo areas) and more. Unlocking is as simple as lightly gripping the handle, allowing for one-handed operation. It can slide not only forward but also backward, making access to other cargo easy. Additionally, the sturdy rack can support up to 70 kg with two bikes and slides 1.5 meters, allowing you to load and unload bicycles while standing. 【Features】 - Uses a "mounting rail" (sold separately) for installation - The main unit can slide left and right - Secures the bike by placing the tires on the wheel holder and using a pumping buckle strap - Simply grasp the frame with the bike holder to complete the setup *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts

We would like to introduce the "3rd Rail + Bike Holder (Optional) for Sport G2" that we handle. This is an additional bike rail for the Sport G2. By adding it, you can expand to accommodate 3 bikes. One bike holder is also included. Please feel free to contact us if you have any inquiries. 【Features】 ■ Additional bike rail for Sport G2 ■ Can be expanded to accommodate 3 bikes ■ One bike holder included *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts