エフ・アイ・ティー・パシフィック List of Products and Services

【Basic Specifications】 - Frequency: 0.5Hz to 350kHz - Acceleration: up to 600m/s² - Maximum weight of test specimen: 25kg - Sine wave, sweep, and field data reproduction vibration - Can be combined with various tests such as low frequency, magnetic field, temperature, and acoustic testing * The values are maximum limits and depend on the equipment configuration and test content. 【Application Example 1: MEMS Sensor Development】 Supports ultra-high frequencies up to 350kHz, allowing for performance evaluation tests and exploration of natural frequencies and resonance frequencies. It can be combined with various environmental testing equipment such as magnetic field, temperature, and acoustic tests, enabling testing under various conditions. 【Application Example 2: Quality Control】 Suitable for shipping tests and inspections of base products, it is expected to improve quality standards by detecting defective products. The latest models "SE-16" and "SE-11" shakers can simultaneously vibrate up to five test specimens. 【Application Example 3: Modal Analysis】 In addition to high-frequency vibration analysis, low-frequency models can accommodate test specimens weighing up to 25kg, allowing for vibration tests as structural components. Vibration can also be conducted using actual vibration data for field reproduction tests, in addition to sine wave and sweep vibration.

**Features** The SE-16 and SE-11 shakers can directly process the base for mounting test samples, allowing for up to five samples to be set simultaneously. By directly processing the base, there is no need to attach fixtures, which reduces distortion and resonance at high frequencies. **Basic Specifications** ● SE-16 - Frequency: 5 kHz to 100 kHz - Acceleration: up to 400 m/s² - Test sample weight: up to 5 grams ● SE-11 - Frequency: 1 kHz to 50 kHz - Acceleration: up to 400 m/s² - Test sample weight: up to 10 grams *Note: The values are maximums and depend on the equipment configuration and test conditions.*

This is a frequency characteristic calibration device for accelerometers from the German company SPEKTRA, a specialized manufacturer of vibration and acoustic sensor calibration equipment. It is a general-purpose type that can be used in a wide range of fields for verifying the response of accelerometers in a general frequency bandwidth. It is certified by the German DKD and can issue calibration certificates traceable to PTB and NIST, and there is also a primary calibration device used by national verification agencies.

The portable vibration generator CV-01 is a new product from SPEKTRA, a company based in Germany. It is scheduled for release in December, and orders are currently being accepted. With a lightweight body weighing only 950 grams, it can vibrate accelerometers weighing up to 150 grams, making it compatible with most sensors. Additionally, its lightweight and compact design allows for easy transport of the main unit, battery, charger, tools, and fixtures in the included dedicated case. The power source is battery-operated, making it ideal for portable use. This allows it to be effective in locations where securing a power supply is difficult, such as outdoors. Furthermore, the battery is an environmentally friendly rechargeable type.

This is a low-frequency vibration exciter from the German company SPEKTRA, a specialized manufacturer of calibration devices for vibration and acoustic sensors. The APS series provides excitation at ultra-low frequencies for seismic measurements and achieves large amplitude strokes, allowing for the verification of the response of low-frequency accelerometers necessary for vibration analysis of structures in the fields of seismic resistance, vibration control, and isolation. Additionally, its application range is extensive, including modal analysis in transportation systems such as automobiles and aircraft, as well as in the electronics field. It is a secondary calibration device certified by the German DKD, capable of issuing calibration certificates traceable to PTB and NIST.

The APS113 series is a calibration device for low-frequency acceleration sensors. It can generate vibrations at low frequencies ranging from DC to 200Hz. While models designed for high frequencies can only produce slight acceleration at low frequencies, the APS113 series can output high G levels even at low frequencies due to its long stroke of 158mm. Additionally, it supports both vertical and horizontal directions. We offer the option to sell the vibration generator alone, and amplifiers and controllers can also be customized to meet your needs, making it useful for vibration impact analysis tests with development products.

The CS18-VHS is a shock-type accelerometer calibration device that uses the Hopkinson bar method. The operation is automated, and it provides electrical pulses to the piezoelectric element a specified number of times according to a list table, resulting in very short test times and excellent waveform reproducibility. It is capable of calibration up to an extremely high G level of 200,000G. Please utilize it for dynamic calibration of accelerometers and G linearity testing. It is suitable for fields that require high G resistance performance, such as aerospace, as well as for shock durability testing in product development and shock evaluation in production.

The CS18-HS is a shock-type accelerometer calibration device that uses the Hopkinson bar method. The operation is automated, and it electrically pulses the piezoelectric element a specified number of times according to a list table, resulting in a very short test time and excellent waveform reproducibility. It is capable of calibration up to a very high G level of 100,000G. Please use it for dynamic calibration of accelerometers and G linearity testing. This product is for secondary calibration, but we also have primary calibration equipment available.

The CS18-MS is a shock-type accelerometer calibration device that uses the Hopkinson bar method. The operation is automated, providing electrical pulses to the piezoelectric element a specified number of times according to a list table, resulting in very short test times and excellent waveform reproducibility. It is capable of calibration up to a very high G level of 4,000G. Please utilize it for dynamic calibration of accelerometers and G linearity testing. This product is for secondary calibration, but we also offer primary calibration equipment.

The CS18-LS is a pendulum impact-type accelerometer calibration device. It is pendulum-based and applies G-force using a hammer from a user-defined angle. It is ideal for dynamic testing calibration of accelerometers and measuring the linearity of G. Additionally, its applications extend to modal analysis in various fields such as transportation machinery like automobiles and aircraft, as well as electronics, industrial machinery, and machine tools.

This is a frequency characteristic calibration device for accelerometers from the German company SPEKTRA, a specialized manufacturer of vibration and acoustic sensor calibration equipment. It allows for the verification of the response of accelerometers in the high-frequency range. It is a secondary calibration machine certified by the German DKD, capable of issuing calibration certificates traceable to PTB and NIST, and there is also a primary calibration machine used by national verification bodies.

The CS18-VLF is a low-frequency sensor calibration device. It is capable of excitation at ultra-low frequencies required for seismic measurements and can achieve the necessary G output from large amplitude strokes. It allows for the calibration of seismometers and accelerometers in the low-frequency range needed for vibration analysis of structures in the fields of seismic resistance, vibration control, and isolation. Additionally, its application range is extensive, including modal analysis in transportation machines such as automobiles and aircraft, as well as in electronics, industrial machinery, and machine tools. This calibration device is intended for secondary calibration in the private sector, but primary standard calibration devices (NIST traceable) are also available.

This is a shock-type accelerometer calibration device from the German company SPEKTRA, a specialized manufacturer of vibration and acoustic sensor calibration equipment. Generally, the calibration and response testing of accelerometers, which is performed statically through frequency calibration (ISO 16063-21 comparative secondary calibration), can now be conducted dynamically by applying actual acceleration and verifying the operation. With a wide testing capability of up to 10,000g, it enables calibration not only from low g levels but also high g calibration necessary for automotive crash tests, as well as in aerospace and military fields.

The PR-Box is an option compatible with the CS18 accelerometer calibration system. It is a junction box designed for the easy installation of accelerometers using piezoelectric elements, bridge resistors, or metal gauges. It is compatible with PR-type sensors (such as piezo and strain gauges) widely used in research institutions, development sites, and fields related to automotive safety and crash testing. It supports both half and full bridge configurations, and is also compatible with shunt checks.

The 'CS18 Option Sensor SUPPLY internal' is a slot for controller expansion of the CS18 series calibration device. It can provide basic DC power supply as well as power supply with short circuit protection. Customization is also possible depending on the usage environment.

The "AS (Automotive Safety) Division" of F.I.T. Pacific conducts business related to vehicle collision testing and imports and sells heat-resistant and abrasion-resistant hoses. We handle products such as TE's "accelerometers and various sensors," Boxboro Systems' optical chest displacement measurement system "Rib Eye," and NORRES' heat-resistant hoses "CP series." Additionally, our Tsukuba Technical Center, which is an ISO/IEC 17025:2005 accredited testing laboratory for the calibration of load cells, accelerometers, displacement sensors, and human dummies, provides calibration services that comply with international standards. 【Products/Services Offered by the AS Division (Partial List)】 ■ Accelerometers and various sensors ■ Dynamic Thread Test System ■ Optical Chest Displacement Measurement System "Rib Eye" ■ Chest Displacement Measuring Device "S-Track" ■ Abdominal Pressure Sensor "APTS" for Q Dummies *For more details, please refer to the PDF document or feel free to contact us.

F.I.T. Pacific is engaged in businesses related to vehicle collision testing, planning, manufacturing, and sales of nursing care welfare equipment, as well as providing ICT (information and communication technology) related products and services. The AS division provides solutions that contribute to improving automotive safety, the CS division solves issues through "monozukuri + kotzukuri" open innovation, and the CFM division achieves efficient operational management through integrated wiring management of networks, all responding to customer needs. We aim to create products that, even if they are inconspicuous or plain, are indispensable and always provide us with safety and peace of mind in unseen ways. 【Business Activities (Excerpt)】 ■ Maintenance services for human dummies and load cells for vehicle collision testing ■ Import and sales of accelerometers for vehicle collision testing, along with maintenance services ■ Sales of CAD-based integrated wiring management database software, data entry, and maintenance services ■ Import and sales of heat-resistant and wear-resistant hoses ■ Planning and sales of bone conduction, repellents, and other products *For more details, please refer to the PDF document or feel free to contact us.