中央電機計器製作所 List of Products and Services

This is a compact-sized outlet box (distribution board). It has been improved to be more compact than traditional outlet boxes. With a size comparable to a desktop PC, it can effectively utilize space on-site. AC100V is input from the main power panel and output to each outlet (front and bottom of the panel) via an NFB. 【Features】 - Equipped with a ground fault detection circuit If a ground fault occurs between the "L phase or N phase of AC100V and ground" of each connected device or power strip, a buzzer sound, LED flashing, and the interruption of the corresponding NFB will occur. - This allows for quick identification of the connection where the ground fault has occurred. - In the event of a fall of the main unit, the NFB lever is designed not to be damaged.

• Distribution Board

This is a system that monitors the values of load cells at both ends of the cable and automatically collects data under set conditions. <Host PC> - Waveform monitoring - Downloading collected data - Setting various conditions PXI <Real-Time Target> - Monitoring data from load cells and optical scale sensors - Synchronized data collection based on set conditions - Operates independently from the host PC

• Other cable related products
• Other Auto Parts
• Other inspection equipment and devices

This is a device that captures and inspects the roundness of measured objects using two optical systems. ● The inspection process takes time. ● It is difficult to sort out defective products. ● We want to prevent misjudgments. 　　　　　⇓ To solve these issues, we recommend inspection using this product. We have a track record of deliveries to manufacturers handling spheres, so we can provide specific proposals and advice based on actual examples. 【Features】 - The major diameter of the measured object can be changed using a fixture attached to the parts feeder. - After judgment, sorting is possible using an air-based sorting function. - Approximately 180 judgments can be made per minute. - Capable of measuring various spheres: ceramic balls, bearing balls, pearls, etc.

• Defect Inspection Equipment
• Visual Inspection Equipment

This is a system capable of testing large capacity loads such as power cables. It can also perform surge voltage application tests, twisting tests, and tests for large capacity loads. The system configuration has been completely renewed while maintaining the functionality of measuring instruments from about 30 years ago. 【Features】 - Capable of outputting surge waveforms with a pulse width of 5us to 400us at a maximum of 100Vpp - New features "Software-controlled time constant adjustment" "Touch panel adoption" "Time constant setting storage"

• Other inspection equipment and devices
• Impact Test
• Electronic Load Unit

This is a device for automatic inspection of defects (dents, bulges, discoloration) on the surface of metal plates. ◆ Significantly reduces inspection time by replacing visual inspections! ◆ Achieves high efficiency in the process through automation of the inspection process. ◆ Illuminates the workpiece with built-in lighting in the inspection device and detects reflected light with a camera (acquires bright field images) to detect defects and identify their locations through image processing. ◆ The surface shape of detected defects can be measured in detail using a three-dimensional shape measuring device. ◆ Equipped with a vacuum chuck and air blow function for dust removal. ◆ Proven capability to handle super-large workpieces (metal plates measuring 10m in length and 2m in width)!

• Defect Inspection Equipment
• Flaw detection testing
• Visual Inspection Equipment

This is a device that detects whether a rare short circuit has occurred due to insulation damage between copper wires by applying voltage between copper wires wound with a combination of different types of insulated copper wire. By simply applying voltage to the device, it enables the detection of short circuits in flat rectangular wires. It contributes to reducing testing time, cutting costs, and predicting short circuit accidents in advance. *Flat rectangular wires are mainly used in oil-filled large transformers and switchgear. Our rare tester is a device that tests the insulation/short circuit status between multiple physically separated flat rectangular wires. (It cannot test the insulation/short circuit of a single coil winding.)

• Testing Equipment and Devices

Are you facing any of the following issues with the aging updates of testing, measurement, and control equipment? - No design documents are available - There is no one left who understands the equipment in question - It's difficult to manufacture in-house, and you don't know where to outsource - The company that previously manufactured it has gone out of business - The measuring instrument currently in use has been discontinued, and you don't know what to replace it with If you have any of these concerns, our company is here to help! Even if there are no documents left, we can inspect the equipment and provide suggestions and manufacturing services. First, our sales team will visit you, and if necessary, our engineers will follow up.

• Embedded system design service
• Other services

This is a unit that synchronizes a multi-channel (64ch) D/A converter to output current. It is ideal for experimental setups that apply current synchronously to multiple small loads (such as LEDs and semiconductor devices).

• Ammeter
• Testing Equipment and Devices
• Semiconductor inspection/test equipment

Multi-channel (voltage and distortion) synchronized recording Immediate display of test results through computational functions after measurement Various graph displays by selecting arbitrary recorded data

• Data Logger
• Other electronic measuring instruments
• Other measurement, recording and measuring instruments

In recent years, there has been a need to respond to the increasing demand for durability testing due to idling stop systems. Would you like to reduce the time spent on automation and analysis of operations with the introduction of a starter durability testing device? 【Features】 - Data after analysis can be automatically saved to a PC - Automation of all inspections exceeding 50 items - Ability to move to the next test immediately after error detection - Engine speed, starter speed, motor current, starter motor input signal, and contact signal can all be analyzed and displayed on a single graph

• Testing Equipment and Devices
• Other analyses

Here we introduce element technologies based on our achievements. 〈Hardware〉 Electrical and electronic circuit design (analog circuits, digital circuits, electrical circuits) Control (actuators, motors, robots, measuring instruments, stage control) Image processing, circuit and mechanism design (camera, lens, lighting mechanism design and assembly) Enclosure design, 2D/3D/CAD design (enclosures, jigs, measurement rack design, etc.) Printed circuit board design and implementation Assembly, wiring, enclosure processing, metal and resin processing Calibration of measuring instruments 〈Software〉 ◆Development languages: LabVIEW, C/C++, .NET (VB, C#, VC) PLC ladder (Mitsubishi, Omron, Keyence, Yaskawa) Python, FPGA (LabVIEW, Verilog, VHDL), Web (LabVIEW NXG, JavaScript), databases (SQL Server, Access, MySQL) ◆System and software design: UML, networks, databases, cloud, AI ◆Measurement and control: data collection, synchronized input/output of multiple signals, communication ◆Equipment and control: stage, robot, actuator, motor control

• Other measurement, recording and measuring instruments
• Image Processing Software
• Testing Equipment and Devices

It is a device that automatically conducts tests by applying signals and loads to the test motor. It collects signals from various sensors and evaluates the motor's performance.

• Testing Equipment and Devices
• Strength Testing Equipment
• Other inspection equipment and devices

Isn't it true that the input and output signals required for various sensor measurements are diverse? Our data acquisition system consolidates various types of signals into a single device. The types and number of input and output signals can also be customized according to your needs.

• Data Logger

You can easily conduct tests by inserting the relay into the socket and simply pressing the start button on the screen. You can test multiple relays simultaneously and display the status of measurement items for each relay. Since all measurements can be completed in under a few dozen seconds, it contributes to the efficiency of operations.

• Strength Testing Equipment
• Environmental Test Equipment
• Pressure

This is an appearance inspection software that utilizes AI anomaly detection technology. It can handle the appearance inspection of a wide variety of workpieces, including metal products, films, resin molded products, and printed materials. (Examples: scratches, foreign objects, chips, color unevenness, missing characters, etc.) By combining it with industrial robots and other equipment, it achieves a reduction in manual visual inspections. 【Features】 - Can learn from images of good products only (images of defective products are not required) - Visually clear and easy-to-use screen design

• Image Processing Software
• Flaw detection testing
• Defect Inspection Equipment

This is a testing device that applies vibrations to products to investigate their effects. When machinery fails, it can lead to enormous costs and time for repairs, as well as the worst-case scenario of profit loss due to equipment downtime. To prevent machinery failures before they occur, we recommend inspections using the vibration testing device. We have a track record of supplying to major machinery manufacturers, allowing us to provide specific proposals and advice based on real examples. 【Features】 - Adjustable settings for swing angle, frequency, number of cycles, and number of steps - Depending on how the specimen is mounted, switching between pitch direction and yaw direction is possible - By adopting PLC, additional functions can be added according to your requirements - Comfortable operation with a handy touch panel - Output data from the specimen can also be obtained (optional)

• Vibration Testing

This is a system that performs autonomous driving necessary for transient characteristic evaluation by rapidly controlling the engine and eddy current dynamometer's rotation speed and load based on driving patterns. 【Features】 - High-precision measurement and control are possible by using a real-time OS. - Switching between automatic and manual driving allows for automatic and manual measurements. - Long-duration operation is possible with autonomous driving, making it suitable for durability testing applications. - Engine torque and output characteristics can be measured through throttle control and dynamometer load control. - It is possible to create and edit arbitrary driving patterns, enabling the collection of engine characteristics for various purposes such as evaluation during steady operation and transient characteristic evaluation. - Driving patterns learned from measurement results are automatically generated for more precise operation. - Measurement results can be output as reports in Microsoft Excel format.

• Testing Equipment and Devices

This is a system that automatically conducts shipping inspections for heavy machinery ECUs (Electronic Control Units). 【Features】 - Allows batch registration of multiple ECUs for inspection - Fully automates over 50 inspection items - Reduces the workload of inspectors (only requires cable reconnections) - Automatically outputs inspection results to a report (Excel file)

• Testing Equipment and Devices

This is an application that reads scanned image data (such as JPEG, PNG, BMP, TIFF) and generates DXF data for use in CAD. It significantly reduces the unnecessary time and costs of manually creating CAD drawings from scratch using calipers or measuring tapes. 【Features】 - The application can be used simply by installing it on a PC. - There is no need to create CAD drawings from scratch, allowing for a streamlined design process. - Even when there are no drawings available (only physical prototypes), CAD data can be generated from the actual object! - DXF data can be freely edited in CAD software that supports editing (output format: DXF data). - It can output data as vectors (coordinate information of shapes) rather than raster (dot-drawing data).

• Image Processing Software
• Other CAD related software
• Data conversion software

This is an appearance inspection software that utilizes AI object detection technology. It is capable of inspecting the appearance of a wide variety of workpieces, including metal processed products, films, resin molded products, and printed materials. (Examples: scratches, foreign objects, chips, color unevenness, missing characters, etc.) By combining it with industrial robots, it achieves a reduction in manual visual inspections.

• Image Processing Software
• Flaw detection testing
• Defect Inspection Equipment

We provide appearance inspection software utilizing AI image recognition technology. It is capable of inspecting a wide variety of items, including metal processed products, films, resin molded products, and printed materials. (Examples: scratches, foreign objects, chipping, color unevenness, missing characters, etc.)

• Image Processing Software
• Defect Inspection Equipment
• Flaw detection testing

The SmartEdge series is a two-dimensional automatic measurement device for dimensions that has been adopted by customers in various industries, including punching processing, polarizing plates, and electronic and electrical materials. Among them, the most popular tabletop model is compact yet capable of measuring up to A2 size (measurement range: 570×420mm). We have compiled examples of product usage and customer feedback from both domestic and international users. Please take a look at the catalog download. ★Features of the SmartEdge series★ ✓ Significant reduction in measurement time compared to manual methods with device implementation ✓ Both measurement and recording can be automated, increasing efficiency and eliminating transcription errors ✓ Standardization of quality inspection methods is possible by introducing the same device at multiple locations! ✓ Remote maintenance (remote support service) is available ✓ The measurement field can be customized by changing the lens magnification ✓ Stage size can be changed (with proven results up to a maximum width of 4m!) ✓ High speed (reduced tact time) and high precision with linear motor drive! ✓ Customization options, such as adding a suction mechanism, are available ✓ By changing the lighting, the cutting edge can also be viewed! ✓ Simple thickness measurement is made possible through customization!

• Image Processing Equipment
• Visual Inspection Equipment
• Other measurement, recording and measuring instruments

The SmartEdge series is a two-dimensional automatic dimension measurement device that has been adopted by various customers in industries such as blade manufacturing, punching processing, battery manufacturing, and textiles, both domestically and internationally. We have gathered examples of cases that accommodate special sizes and products, along with customer feedback. Please take a look at the catalog download. ★Features of the SmartEdge Series★ ✓ Significant reduction in measurement time compared to manual processes with device implementation ✓ Both measurement and recording can be automated, increasing efficiency and eliminating transcription errors ✓ By introducing the same device at multiple locations, it is possible to standardize quality inspection methods! ✓ Remote maintenance (remote support service) is available ✓ The measurement field can be customized by changing the lens magnification ✓ Stage size can be changed (with proven results up to a maximum width of 4m!) ✓ High-speed (shortened tact time) and high precision with linear motor drive! ✓ Customization options such as adding a suction mechanism are available ✓ By changing the lighting, the blade edge can also be viewed! ✓ Customization allows for easy measurement of thickness as well!

• Image Processing Equipment
• Visual Inspection Equipment
• Other measurement, recording and measuring instruments

Visual inspection is tough... I want to delegate it to someone with just a simple explanation..." For those who feel this way, the 'DIP Switch Inspection System' is a system that prevents human errors in visual inspections with easy operation. Simply place the target product on the inspection table, and the shipping inspection will start using image processing. It automatically judges the accuracy of the settings made manually as OK or NG. As shipping data, it can accumulate customer information, serial numbers, inspection images, etc., ensuring traceability. [Features] - Minimal system configuration allows for cost reduction and compact size, making operation easy. - Inspection content can be customized according to the target product. - Target products can include items other than switches; inspection is possible if image processing is applicable. - Additional electrical measurement tests are also possible (LabVIEW). - Proposals for suitable image processing systems through the combination of optical devices. *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• Visual Inspection Equipment

The "Micro Foreign Matter Inspection System" is a system capable of detecting tiny foreign objects that are difficult to find visually within the inspection items. Visual inspections often fail to identify foreign objects, leading to defects caused by contamination being discovered in later processes, which this system helps to prevent. It is useful for inspecting debris and foreign objects in the openings of inspection items and for checks after cleaning. 【Features】 ■ Capable of detecting tiny foreign objects that are difficult to find visually ■ Visualization of foreign objects allows for recording of the areas where they occur ■ Understanding the occurrence situation enables countermeasures and improvements, increasing production management efficiency ■ Easy operation and installation, allowing anyone to perform inspections ■ Realization of a consistent system with measuring instruments and peripheral devices *For more details, please refer to the PDF materials or feel free to contact us.

• Visual Inspection Equipment
• Defect Inspection Equipment
• Other inspection equipment and devices

The system conducts visual inspections of steel plates, detecting scratches and dents that occur during the processing. By using an 8K line camera, it is possible to capture images of steel plates flowing at high speed. An environment can be established that allows for shooting even in a narrow inspection space. The captured images are saved to a PC for preprocessing, and after transferring the data to the AI server via local 5G, inspections are conducted using AI. 【Inspection Flow】 ■ Capture images of the steel plates with four line cameras ■ Save the captured images to a PC for preprocessing ■ Transfer data to the AI server via local 5G ■ Conduct inspection using AI *For more details, please refer to the related links or feel free to contact us.

• Visual Inspection Equipment

Our company is a professional in the development environment specialized in measurement and control, known as "LabVIEW." We take pride in over 20 years of experience as a system integration partner of NI (National Instruments) in the United States, and we excel in building test, measurement, and control systems using "LabVIEW." "LabVIEW" is a type of programming language, similar to C language and Python. It is a graphical programming environment used for developing advanced test, measurement, and control systems. It features an intuitive interface similar to a flowchart, using icons and wires. Additionally, we offer a service called "LabVIEW Rescue (Software Development Support)," where certified developers from NI in the United States visit directly to provide development support for "LabVIEW." *For more details, please refer to the related links or feel free to contact us.*

• Other information systems
• Other contract services

The "3D Image Inspection System" is a three-dimensional image inspection system for three-dimensional structures. Using sensors mounted on a robotic arm, it can automatically recognize the position of the inspection target without the need for teaching and perform inspections on the necessary areas. The image processing employs a special shooting method, allowing for image processing even on inspection objects that are difficult to recognize with standard photography. 【Features】 ■ Automatic recognition of the inspection target's position without teaching ■ Capability to inspect necessary areas ■ Adaptable to products that are difficult to photograph normally ■ Inspection possible after converting to clear images using proprietary image processing technology ■ Customization of the entire system allows for application to various products *For more details, please refer to the related link page or feel free to contact us.

• Inspection robot
• Other inspection equipment and devices
• 3D measuring device

Our company offers a "Camera-Based Personnel Surveillance System" that alerts when workers enter dangerous areas with warning lights. Through the network, camera footage can be obtained in real-time, and monitoring from remote rooms, such as offices, is also possible. Additionally, the system is equipped with a moving object tracking function within the camera footage, allowing detected moving objects to be highlighted and tracked. 【Features】 ■ Real-time acquisition of camera footage via the network ■ Power supply to cameras and warning lights from a PoE hub ■ Moving object tracking function within the camera footage ■ Alerts with warning lights (red light and buzzer sound) when entering dangerous areas ■ Early detection of hazards through video monitoring with multiple cameras *For more details, please refer to the related links or feel free to contact us.

• Surveillance Camera System

The "Custom Remote Monitoring System (Utilizing NI SystemLink)" is a system that allows remote operation of on-site PCs using LabVIEW NXG and SystemLink. You can check measurement data from scattered testing devices in real-time and perform remote control using your usual PC or tablet. Additionally, it can be used in hazardous locations with high temperatures and pressures where human access is not possible. 【Features】 ■ Remote operation of on-site PCs using LabVIEW NXG and SystemLink ■ Usable in hazardous locations with high temperatures and pressures where human access is restricted ■ Real-time monitoring available on PCs, tablets, and smartphones ■ Centralized management of measurement data from multiple remote sites ■ Comprehensive consultation available from signal acquisition to smartphone app development - Discussion on signal acquisition, sensor selection, cloud/Web app development, etc. *For more details, please refer to the related links or feel free to contact us.

• Surveillance Camera System
• Remote Control
• Process Control System

"Smart i Catch" is a system that allows for remote monitoring of equipment located in distant factories or sites. It connects to the internet without using existing networks, uploads the acquired data to the cloud, and monitors the status of the equipment from various devices. Additionally, it is possible to remotely control existing systems when an anomaly is detected (optional). 【Features】 ■ Uploads data acquired from sensors to the cloud using an IoT communication module ■ Flexible combinations of various sensors ■ High scalability and flexibility, allowing customization of specifications according to application ■ Remote checking of acquired data via Excel ■ Compact size that does not require installation, making it easy to set up 【Exhibition Information】 Exhibition Name: Maintenance Resilience OSAKA 2022 Dates: December 7 (Wednesday) to 9 (Friday), 2022, 10:00 AM to 5:00 PM Location: Intex Osaka, 1-5-102 Nanko-Kita, Suminoe-ku, Osaka 559-0034 Booth Number: Hall 4, Booth Number: 4L-26 *For more details, please refer to the related links or feel free to contact us.

• Surveillance Camera System
• Remote Control
• Process Control System

The "Digital Meter (7-Segment Display) Automatic Reading System" is a system that captures images of the values displayed on digital displays of measuring instruments and control panels using a camera, recognizes the characters, and converts them into data. It is possible to provide proposals tailored to customer needs, such as analysis of quantified values and data acquisition at regular intervals. This system eliminates inspection oversights, transcription errors, and data tampering. 【Features】 ■ Automates tasks previously performed by humans ■ Achievable at a reasonable cost ■ Software development can be customized ■ Automates management of various types of meters ■ Reduces costs for routine inspections *For more details, please refer to the related links or feel free to contact us.

• Document and Data Management
• Surveillance Camera System
• Image analysis software

We would like to introduce feedback from customers who have actually implemented the SmartEdge series. "We received feedback such as, 'The device has a simple functionality, making it easy for beginners to use, so we were able to start measuring from the implementation day with just half a day's training,' and 'It can accommodate warping of large workpieces (equipped with a suction mechanism).'" For more details, please check the related links. 【Customer Feedback (Partial)】 ■ Both hardware and software are consistently manufactured, so after-sales support is solid. ■ It can accommodate warping of large workpieces (equipped with a suction mechanism). ■ The price and specifications match well (the balance between price and specifications is excellent). ■ Time for reworking blade types has been reduced. *For more information, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Image Processing Software

The "SmartEdge GS2-HLS6560" is a dimensional automatic measurement device equipped with a linear motor, enabling high-speed and high-precision measurements. Due to its high measurement accuracy, it is suitable for measuring products cut with high-precision blades such as pinnacle blades, rather than those cut with Thomson-type blades. By changing to four-directional lighting as an option, it also allows for the measurement of blade types such as Thomson blades and corrosion blades. 【Features】 ■ High-speed measurement of up to 1,000 mm/sec enabled by the use of a linear motor ■ Suitable for measuring workpieces with strict tolerances due to high measurement accuracy ■ Camera movement without confusion thanks to the map function ■ Easy operation by selecting icons on the screen ■ Measurement of blade types such as Thomson blades and corrosion blades is possible with four-directional lighting *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Image Processing Software

The "Analog Meter Value Reading System" is a system that captures analog meters on measuring instruments and control panels with a camera, detects the angle of the needle, and outputs the value in digital form (data conversion). It enables data conversion even for older models of measuring instruments and meters that have difficulty with digital output. By automating the visual confirmation and transcription tasks that were previously performed by humans, it helps reduce human errors. 【Features】 ■ Achieves data conversion even for older models of measuring instruments and meters that have difficulty with digital output ■ Automates visual confirmation and transcription tasks previously done by humans ■ Contributes to the reduction of human errors ■ Software development can be tailored to meet customer needs ■ Achievable at a reasonable cost *For more details, please refer to the related links or feel free to contact us.

• Image analysis software
• Image Processing Software
• Recorders

Scanner-type Automatic Dimension Measurement Device Model: SmartEdge S-CN4030 (Work Size: 400×300mm) This is a scanner-type automatic dimension measurement device that allows for measurement with a single click. It can measure thin workpieces up to A3 size. (Precision sheet metal (molds), printed circuit boards, various films, etc.) It is suitable for customers who often measure one-of-a-kind items rather than measuring large quantities of the same item! 【Features】 ■ One-click measurement without the need for teaching ■ Optional lighting allows for measurement of cutting edges (dies) ■ Ability to measure freely at any desired location ■ Capable of measuring up to A3 size ■ Contributes to operational efficiency by allowing batch measurement of multiple workpieces ■ Once scanned, measurements can be taken at any time later *For more details, please contact us.

• Other image-related equipment
• Other measurement, recording and measuring instruments
• Other electronic measuring instruments

Super Large Dimension Automatic Measurement Device SmartEdge Custom-Made Support Custom sizes for large dimension measurement devices are available. We have various delivery records ranging from 500mm to a maximum of 4,000mm. 【Features】 ● Delivery records available from 500mm size to 2m, with lengths up to 4m! ● The size and specifications of the device can be customized for each customer. ● Driven by a linear motor, it can accommodate larger work sizes while maintaining precision. ● We flexibly support hardware additions such as suction mechanisms, lighting changes, height measurement options, as well as software modifications and new feature additions.

• Other inspection equipment and devices
• Image Processing Software
• Other image-related equipment

Large Stone Surface Plate Dimension Automatic Measurement Device SmartEdge Model: GS-HLS180120G (Work Size: 1,800×1,200mm) Since it uses a stone surface plate, it has gentle expansion and contraction, allowing for stable measurements. There are numerous implementation records with optical film manufacturers for large televisions. The suction plate can also be upgraded as an option. 【Features】 ● Stable measurements possible with the adoption of a stone surface plate ● Full-surface suction mechanism can be installed, allowing for accurate measurement of curled workpieces ● Numerous shipping records to overseas (including CE mark achievements) ● Proven performance with a maximum size of 1800mm×1200mm ● Size can be customized according to requirements

• Other measurement, recording and measuring instruments
• Other image-related equipment
• Other inspection equipment and devices

2.5D Dimension Automatic Measurement Device Model: SmartEdge GS2-HLS150120MH (Work Size: 1,500×1,200mm) In addition to 2D measurement of flat workpieces like films, it can also easily measure the thickness and height of the workpiece. Since it can measure anywhere on the workpiece, it is capable of measuring areas that cannot be measured with a micro gauge, including locations outside the workpiece's perimeter. By combining with four-directional lighting, it can also measure the height and dimensions of the cutting edge of a die. 【Features: Height measurement function is standard equipment!】 ● In addition to standard 2D measurements, it can measure the height of the workpiece in microns. ● It can measure areas that cannot be measured with a micro gauge. (Measurements can be taken not only near the edge of the workpiece but also in the center.) ● Usable for various types of products such as dies (Thomson blades), resin molded products, and metal processed products. ● The low contact pressure sensor does not damage the workpiece.

• Other image-related equipment
• Other measurement, recording and measuring instruments
• Other electronic measuring instruments

For over 90 years since our founding, we have continued to challenge ourselves to create unique solutions that address our customers' issues, specializing in the fields of testing, measurement, and control. As an alliance partner of National Instruments (NI) in the United States, we have over 20 years of experience in system integration (SI) centered around LabVIEW for testing, measurement, and control systems. We provide comprehensive support for development, design, and manufacturing, from individual items to mass production, including hardware, software, and even mechanical components.

• Testing Equipment and Devices
• Other image-related equipment
• Other embedded systems (software and hardware)

Buried pipes, such as gas pipes, are corroded by currents flowing into the ground from the piping side. This device can easily measure the intermittent direct current flowing through the pipe, which is forced from the outside, providing fundamental data to understand the insulation condition of the buried pipes and the rate of corrosion progression. 【Features】 - The sensor does not use a ferromagnetic core, making it lightweight (approximately 700g) and highly flexible, allowing for measurement simply by wrapping it around, regardless of the pipe size. - The main unit of the measuring device is battery-operated, portable, and does not require zero balance adjustment, making maintenance easy. *For more details, please download the materials or contact us.*

• EMC/Static electricity measuring equipment

The "High-Frequency Large Current Measuring Device LCA-101" adopts a clamp method that does not use an iron core for the sensor, eliminating the need to consider linearity degradation due to iron loss or saturation, as well as the frequency characteristics of the iron core, allowing for the measurement of high-frequency large currents. The sensor comes in two types: clamp type and flexible type, and it can accommodate various shapes of the measured object. 【Features】 ■ Adopts a clamp method ■ Capable of measuring high-frequency large currents ■ Available in two types: clamp type and flexible type *For more details, please contact us.

• EMC/Static electricity measuring equipment

Equipped with intuitive and easy-to-understand operability, it can quickly and easily handle the measurement of one-of-a-kind items. Measuring mass-produced items is as simple as ever, allowing anyone to measure in the same way, repeatedly. It is a tabletop model that takes up relatively little space while being able to measure up to A3 size. *Custom options are available, allowing for the production of any work size! 【Features】 ■ The initial program allows anyone to perform the same measurements afterward. ■ Improved accuracy compared to conventional models with a 2-megapixel camera and high-resolution lens. ■ A tabletop model that can measure up to A3 size. *Larger sizes can also be accommodated with custom orders. ■ Measurement results are automatically generated, eliminating transcription errors. ■ Automatic measurement reduces time and improves work efficiency! ■ Intuitive operation with just a press of an icon, making it easy for anyone to use. ■ Optional lighting allows for the measurement of blade tips (die cuts). *For more details, please contact us.

• Other measurement, recording and measuring instruments

Isn't it cumbersome to check the operational status of devices by going to the site? The "Custom Remote Monitoring System" allows you to check measurement data from scattered testing devices and the status of processing machines in real-time using your regular PC or tablet. We can assist you with everything from signal collection to smartphone app development, so please feel free to contact us when you need assistance. 【Features】 ■ Real-time monitoring is possible ■ Leads to improved work efficiency and productivity ■ Comprehensive consultation available from signal collection to smartphone app development - Discussion on the signals to be acquired / Selection of sensors to be used / Cloud / Web app development, etc. *For more details, please refer to the related links or feel free to contact us.

• Surveillance Camera System
• Other security and surveillance systems

This is a two-dimensional inspection device using a high-resolution camera and a high-precision X-Y stage. It is suitable for inspecting surface scratches and foreign objects on optical films, sheets, and touch panels, as well as for defect inspection. With an optical resolution of "1.8μm," it enables very high-precision inspections. It can also accommodate dimensional measurements and inspect two-dimensional punched products. 【Features】 - Automatically saves inspection data and images - Camera pixel count: 9 million pixels - High optical resolution (1.8μm) allows for clear viewing of fine inspection areas - Ideal for inspecting peripheral electrodes of touch panels and disconnections or short circuits in fine wiring of printed circuit boards *For more details, please download the materials or contact us.

• Defect Inspection Equipment
• Flaw detection testing
• Circuit Board Inspection Equipment