グローバル電子 Product Lineup

The "MIP Series" is a high-performance pressure sensor compatible with digital output. By combining piezoresistive sensing technology and ASIC in a stainless steel housing, it is fully calibrated and temperature compensated, achieving stable and high-precision measurements. Additionally, this product uses 316L stainless steel, providing excellent corrosion resistance. It can measure pressures up to 60 bar (6 MPa), making it suitable for use with highly corrosive fluids and in harsh environments. 【Features】 ■ Pressure range: 1 bar to 60 bar (0.1 MPa to 6 MPa) ■ Digital output compatible: I2C/SPI ■ Media isolated by hermetic welding ■ Maximum ±2.0% FSS (TEB) over the operating temperature range ■ IP67 waterproof and dustproof performance *For more details, please download the PDF (English version) or feel free to contact us.

• Pressure Sensor

The WEO012864Y is a 1.54-inch, 128×64 dot, small OLED display. It has a built-in SSD1309 driver IC and supports 6800/8080 8-bit parallel, I2C, and 4-wire SPI interfaces. The logic supply voltage is 3V, the display supply voltage is 12.5V, and the duty cycle is 1/64. The current consumption at 50% display is 16mA@12.5Vcc (typ.), with an operating temperature range of -40℃ to +70℃ and a storage temperature range of -40℃ to +85℃. Additionally, it does not require a backlight, making it thin at 2.01mm and low in power consumption. 【Features】 ■ High resolution with 128×64 pixels for clear visual display ■ Graphic organic EL ■ Low power consumption with a 3V operating voltage ■ Interfaces include 6800, 8080, SPI, and I2C ■ Emission colors are white, yellow, and green *For more details, please download the PDF (English version) or feel free to contact us.

• Organic EL

The "Conductivity (Electrical Conductivity) Sensor" from IST, which we handle, can operate over a wide conductivity range of 10μS/cm to 200mS/cm. To realize custom-made sensors that meet customer requirements, we offer various chip sizes and cell constants. If you consult us about your applications and requirements, we will propose sensors with appropriate shapes and cell constants. 【Features】 ■ Wide range of conductivity measurement from 10μS/cm to 200mS/cm ■ Utilizes thin film/pressure film technology, incorporating a platinum (Pt) RTD temperature sensor ■ Temperature range: -30℃ to +100℃ ■ 4-electrode type *For more details, please download the PDF (English version) or feel free to contact us.

• Sensors

The "TMR-type magnetic sensor" from MultiDimension Technology, which we handle, utilizes the tunnel magnetoresistance effect, offering higher sensitivity, higher precision, and lower noise compared to Hall elements. It has low temperature drift, low power consumption, and fast response capabilities. Its compact size makes it suitable for board mounting, and it is well-suited for applications requiring high precision, such as motor control and current detection. Please feel free to contact us if you have any inquiries. 【Features】 ■ High sensitivity and high precision ■ Low offset and low drift ■ Low power consumption ■ Wide bandwidth ■ Easy miniaturization *For more details, please refer to the related links or feel free to contact us.

• Sensors

We would like to introduce the "UL wire" from New Asia Electronics, which we handle. The company has its own national accredited testing laboratory recognized by China, allowing them to provide UL wires aimed at stable quality. They offer a variety of UL wires, including popular UL1015/1007, and provide a wide range of coating colors. In addition to stranded wire, single-core options are also available, ensuring a rich lineup of UL wires. 【Features】 ■ A wide range of UL wire options ■ A variety of coating colors available ■ Single-core options available in addition to stranded wire *For more details, please refer to the related links or feel free to contact us.

• cable

The "CC7500L3B75TEZ (water-cooled) / CH7500L3B75TEZ (conductive cooling)" is an AC-DC power supply unit that can achieve a fanless cooling system. The DC output voltage is set to 65-80Vdc for supply applications to laser oscillators and high-frequency amplifiers, and it complies with protection class IP65, making it suitable for industrial equipment applications. Additionally, dedicated AC input cables, DC output cables, signal cables, current share cables, and a ModBus development toolkit are available as options. 【Features】 ■ Cooling method: Water cooling or conductive cooling ■ Redundancy and parallel operation function (active current sharing) ■ Protection features: Input overvoltage, undervoltage, output overvoltage, overload, overheating, emergency stop interlock control ■ Communication protocol: ModBus ■ Protection class: IP65 *For more details, please download the PDF (English version) or feel free to contact us.

• Other power sources

The "WEO025664D-CTP" is a COG graphic 3.55-inch OLED with a resolution of 256×64 dots, and the module is equipped with a capacitive touch panel. The module features an SSD1322 IC and supports 6800/8080 8-bit and 3-wire/4-wire SPI interfaces. The display supports 4-bit grayscale, operates at a power supply voltage of 3.3V, and uses a display power supply voltage of 16V with a duty cycle of 1/64. 【Features】 ■ High resolution: 256×64 pixels for clear visual display ■ Contrast ratio: 10,000:1 for vibrant display ■ Low power consumption: Low power consumption at a 3V operating voltage ■ Interfaces: 6800, 8080, SPI ■ Emission colors are white and yellow *For more details, please download the PDF (English version) or feel free to contact us.

• Organic EL

The "KISSLING Series 29" is a high-power relay that complies with the IP67 and IP6K9K (steam cleaning) protection standards. It features high shock resistance and vibration resistance due to careful design and optimized magnetic circuits, making it highly suitable for various applications under harsh conditions. Please feel free to contact us when you need assistance. 【Features】 ■ 75A to 500A, 12 to 80VDC, single coil latching industrial relay ■ IP67/IP6K9K (steam cleaning) sealing technology ■ 6G shock resistance and 4G vibration resistance ■ More than 100,000 switching cycles at maximum load rating ■ Achieved 2 million mechanical cycles in mechanical life testing *For more details, please download the PDF (English version) or feel free to contact us.

• relay

The "0402DF(1005) series" is a ferrite bead that exhibits high impedance characteristics over a wide bandwidth, reaching GHz frequencies, despite its 0402(1005) size. It supports high rated currents thanks to its ferrite core and thick wire, while achieving extremely low DC resistance (DCR) to minimize insertion loss. Additionally, compared to our conventional products, it reduces DCR by 40% and supports a larger rated current (Irms). 【Features】 ■ Higher inductance values than other 0402(1005) size inductors ■ Ferrite structure suitable for high current ■ Inductance values ranging from 20nH to 3.3μH ■ Suitable for both mobile devices and infrastructure equipment ■ AEC-Q200 Grade 1 compliant (-40℃ to +125℃) *For more details, please download the PDF (English version) or feel free to contact us.

• Other electronic parts

The "Ag53000 series" is a high-efficiency PD (Power Device) module compliant with IEEE802.3at (PoE+) and IEEE802.3af (PoE) standards. It outputs a maximum of 30W at an output voltage of 12V or 24V. By reviewing each component from the old model, we have achieved approximately a 20% price reduction. Additionally, it incorporates overload, short circuit, and over-temperature protection, ensuring an insulation withstand voltage of 1500Vdc. This simplifies the PoE power supply design for PoE cameras, industrial equipment, and IoT devices. 【Features】 ■ IEEE802.3at Type2/Class4 ■ Maximum output of 30W, normal output of 24W ■ Through-hole type ■ Size: 57mm(L) × 14mm(H) × 18mm(W) ■ Equipped with overcurrent protection, short circuit protection, and thermal protection functions *For more details, please download the PDF (English version) or feel free to contact us.

• Other electronic parts

The "LP2 Series" is a high-precision and high-stability pressure sensor specifically designed for ultra-low pressure range measurements. It supports a wide measurement range of 150 to 7000 Pa and provides stable, high-reliability data in various environments by fully compensating for the nonlinearity of temperature and pressure. It is compatible with both digital and analog outputs, supporting multiple communication methods and voltage ranges in a single package, making system upgrades and integration easy. Additionally, it features excellent pressure resistance, capable of withstanding 10 to 100 times the maximum operating pressure. 【Features】 ■ Ultra-low pressure compatibility and wide pressure range: 150 to 7,000 Pa ■ Diverse output interfaces: Digital (I2C/SPI), analog output ■ High-precision compensation function: Fully compensates for the nonlinearity of temperature and pressure ■ Versatile design: Can select between differential pressure and gauge pressure, applicable in a wide range of fields ■ Wide measurement temperature environment: Operating temperature -40 to 85℃ *For more details, please download the PDF (English version) or feel free to contact us.

• Pressure Sensor

The "Ag59800-LPB Series" is a 100W class PD module compatible with IEEE802.3bt (PoE++), which receives power from category 5 (Cat5) Ethernet cables and provides up to 89W of output. It is compatible with all IEEE802.3bt/at/af standards, operates as a Type 4/Class 8 device, and offers selectable output voltages of 12V and 24V. Additionally, as a PoE++ device, it is among the smallest in the world, making it suitable for compact products that cannot accommodate discrete designs. Furthermore, it is designed for use in industrial terminals and can operate in temperature ranges of up to 85°C. 【Features】 - Two models with output voltages of 12V (Ag59812-LPB) and 24V (Ag59824-LPB) - Very compact for a 100W class: 51mm x 30mm x 15mm - Equipped with overcurrent protection, short-circuit protection, and thermal protection features - Maximum output of 89W in the PoE++ class - IEEE802.3bt Type 4/Class 8 *For more details, please download the PDF (English version) or feel free to contact us.

• Other electronic parts

The "PEC0x series" consists of three types of incremental microencoders. "PEC04" is suitable for advanced consumer electronic devices that are becoming more compact, while "PEC05" is ideal for mouse wheels, smart home devices, and wearable devices. "PEC06" is suitable for smart home devices and desk lamps, contributing to the reliability improvement of intelligent devices. These products are robust, compact surface mount types that meet the IP40 dustproof standard, boasting rotation durability of 30,000, 50,000, and 20,000 cycles, respectively. 【Features】 ■ Compact size incremental, 5Vdc drive ■ Plastic shaft ■ Operating temperature range: -20 to 70°C (04, 05), -25 to 85°C (06) ■ RoHS compliant *For more details, please download the PDF (English version) or feel free to contact us.

• encoder

The "WEN025664D-CTP" is an industrial-grade 5.5-inch COF structure graphic organic EL display. It features a frame bezel and a capacitive touch panel with a resolution of 256×64. It incorporates an SSD1322 COF IC and supports 6800/8080 8-bit parallel and 3-wire/4-wire SPI interfaces. The logic power supply voltage is 3V, with a typical current of 240mA@3.0V VDD at 50% brightness, and the driving duty is 1/64. 【Features】 ■ High resolution of 256×64 pixels for clear visual display ■ Graphic organic EL module ■ Low power consumption with a 3V operating voltage ■ Interfaces: 6800, 8080, SPI ■ Emission colors: white, yellow, green *For more details, please download the PDF (English version) or feel free to contact us.

• Organic EL

The "Optomax Series" is a liquid level sensor designed for industrial applications. The sensor materials use polysulfone, which has excellent chemical and heat resistance, or Trogamid, which combines impact resistance and transparency, allowing for accurate detection of the presence or absence of almost all liquids, including oil-based and water-based liquids. It supports a maximum operating voltage of 30VDC and offers selectable output methods suitable for various applications, from low power consumption to high output drive. The operating temperature range is wide, from -40°C to 125°C, making it suitable for a variety of industrial applications such as valve and pump control, tank liquid level management, and leak detection. 【Features】 ■ Capable of detecting the presence or absence of almost all liquids ■ Supports operating voltages of 4.5–15.4VDC or 8–30VDC ■ Utilizes low-cost optical technology ■ Compatible with standard temperature range (-25 to 80°C) and extended temperature range (-40 to 125°C), allowing measurement in harsh environments ■ Available with screw-mounted housing for external installation, in either polysulfone or Trogamid material *For more details, please download the PDF (English version) or feel free to contact us.

• Liquid level control/level switch
• Liquid Level Sensor

In the water treatment industry, accurately monitoring the water pressure in pipes and tanks within the plant is essential for efficient operation and ensuring safety. Abnormal water pressure can lead to equipment failure or deterioration of water quality. The ME500 pressure sensor, with its excellent chemical resistance and robustness, is capable of long-term use in water treatment environments, providing stable water pressure measurements. 【Usage Scenarios】 - Water pressure monitoring in water treatment plants - Wastewater treatment facilities - Industrial water supply systems 【Benefits of Implementation】 - Reduced maintenance costs due to high durability - Stable operation of the plant through accurate pressure measurements - Extended lifespan due to chemical resistance

• Pressure Sensor

The "HTX8045C Series" is an insulated transformer for gate drive applications that features a chip-type structure with proven performance in the HTX family. It achieves significant miniaturization compared to transformers with conventional core and bobbin structures. This compact design not only reduces component size but also improves manufacturing efficiency, enabling production at a more cost-effective rate. 【Features】 ■ An insulated transformer optimized for use with insulated bias power supplies for SiC and GaN gate drivers such as TI's UCC25800-Q1 and MPS's MPQ18913/14. ■ The inter-winding capacitance is kept low at 0.55pF, resulting in low EMI and high common-mode transient immunity (CMTI). ■ Despite its small dimensions of just 4.85×8.20×5.30mm, it achieves a very high insulation voltage (hipot) of 5000VDC and 3535Vrms (for 1 minute) between primary and secondary windings. ■ AEC-Q200 certified (-40°C to +125°C). *For more details, please download the PDF (English version) or feel free to contact us.

• transformer

The "MHA100KN" is an innovative omnipolar sensor chip developed by MEMSIC. It allows for the free selection of either N-pole output or S-pole output and can also be used as a smart meter or cover detection switch. Additionally, it features ultra-low power consumption, supports a wide range of input voltages, and its compact design makes it suitable for small consumer devices such as wireless earphones, speakers, and laptops. It has a built-in sensitivity compensation circuit and excellent temperature compensation capabilities, ensuring high-quality performance and stability even in environments ranging from -45°C to 85°C. 【Features】 ■ CMOS low power consumption ■ Built-in sensitivity compensation circuit ■ Operating voltage: 1.65–5.5V ■ Magnetic switching points: min 27 - typ 37 - max 47 [Gauss] ■ Size: 1.0×1.4×0.37mm *For more details, please download the PDF (English version) or feel free to contact us.

• Sensors

The WEO012832P is a 1.71-inch COG module composed of 128×32 dots. It features an integrated CH1115 IC and supports I2C, 4-wire SPI interface, a 3V logic power supply voltage, and a 1/32 driving duty. The current at 50% display is 5mA@12V VCC (for white). This product, which offers advantages such as being thin, lightweight, and low power consumption, is suitable for mobile devices, health devices, inspection equipment, etc. The operating temperature ranges from -40℃ to +80℃, and the storage temperature ranges from -40℃ to +85℃. 【Features】 ■ High resolution with 128×32 pixels for clear visual display ■ Graphic OLED ■ Low power consumption with a 3V operating voltage ■ Interfaces: SPI, I2C ■ Emission colors are white and yellow *For more details, please download the PDF (English version) or feel free to contact us.

• LCD display

"Chameleon" is a bidirectional release type 78-pin high-density connector that meets diverse needs with an innovative connection method for medical use. By combining it with various cable assembly processes, effective and low-cost designs can be achieved. Please feel free to contact us if you have any inquiries. 【Features】 ■ Number of pins: 78-pin ■ Current: 2.5A (Max 1.5A/pin selectable item) ■ Contact resistance: 20mΩ max ■ Connector insertion/removal cycles: 1,000 times ■ Waterproof: IP67 ■ Operating temperature: -51℃ to +125℃ *For more details, please download the PDF (English version) or feel free to contact us.

• Other Connectors

The "FemtoDLynxII FKX Series" is a non-isolated DC-DC converter that supports a maximum output current of 3A/6A with a common package size and common footprint. It features a Tunable Loop function that optimizes transient response characteristics and stability. The Power Module Wizard simulation tool is available online, contributing to a reduction in circuit design time. 【Features】 ■ Supports 3A/6A with a common footprint ■ Tunable Loop function ■ Overcurrent protection and overheat protection ■ Remote sense and power good ■ Circuit design using the Power Module Wizard simulation web tool *For more details, please download the PDF (English version) or feel free to contact us.

• converter

The "BES Series" employs unique gas detection technology aimed at the early detection of venting and thermal runaway in lithium-ion battery packs and modules. It detects the electrolyte vapor that typically occurs during initial venting, as well as hydrogen and carbon monoxide gases released during thermal runaway. This allows for the early identification of thermal runaway in lithium-ion battery packs, significantly reducing risks by implementing appropriate mitigation measures. Furthermore, by responding to multiple gases, the reliability of detection is improved, and the occurrence of false negatives is reduced. Therefore, it is a suitable sensor for installation in large energy storage systems as the adoption of renewable energy expands. 【Features】 ■ Sensing Targets - Battery electrolyte, Hydrogen (H2), Carbon monoxide (CO), Temperature, Humidity/Pressure ■ No need for threshold testing or verification of target gases due to the change rate algorithm ■ Automotive grade: Compliant with international safety regulations such as UN GTR 20, China's GB38031, and the US NHTSA FMVSS 305A *For more details, please download the PDF (English version) or feel free to contact us.

• Sensors

The "PIC32A" is a 32-bit general-purpose microcontroller operating at 200MHz, featuring Microchip's original core. It is equipped with a wealth of high-speed analog modules, allowing it to operate at higher clock speeds compared to typical 8-bit and 16-bit microcontrollers. By incorporating a double-precision floating-point arithmetic unit, it is capable of intelligent edge processing. It includes hardware safety and security features, enabling the secure execution of software code within embedded control system applications. 【Features】 ■ 32-bit general-purpose microcontroller with original core operating at 200MHz ■ 12-bit ADC with a maximum of 40Msps ■ High-speed 5ns comparator ■ 100MHz GBWP (Gain Bandwidth Product) operational amplifier ■ Double-precision floating-point arithmetic unit *For more details, please download the PDF (English version) or feel free to contact us.

• Microcomputer

The WEO006448B is a low-power COG OLED with a diagonal size of 0.66 inches and a resolution of 64×48 dots. It has an integrated SSD1315 and supports 6800, 8080, 4-wire SPI, and I2C interfaces. The supply voltage for the logic circuit is 3V, while the supply voltage for the display is 7.5V. The typical current consumption of the display is 3mA at 7.5V VCC with a 50% display, and the driving duty is 1/48. It supports both internal voltage conversion circuits (charge pump) and external VCC supply. 【Features】 ■ High resolution with 64×48 pixels for clear visual display ■ Graphic OLED ■ Low power consumption with a 3V operating voltage ■ Interfaces for 6800, 8080, 4-wire SPI, and I2C ■ Emission colors are white and yellow *For more details, please download the PDF (English version) or feel free to contact us.

• LCD display

The "IPM Series" is a radar-based automatic intelligent self-calibration particle matter sensor that detects and measures particle concentration using light scattering methods to monitor air quality. It is compatible with particle diameters of PM1.0, PM2.5, PM4.0, and PM10, and can measure particles ranging from 0.3μm to 10μm. Additionally, the concentration measurement range is extensive, from 0 to 1,000μg/m3. This sensor is suitable not only for indoor and outdoor air quality monitoring applications but also for integration into devices such as air purifiers. 【Features】 ■ Compatible with PM1.0, PM2.5, PM4.0, PM10 ■ Wide concentration range of 0μg/m3 to 1,000μg/m3 ■ Supports digital (I2C and UART) and analog (PWM) outputs ■ Fast response time for real-time environmental measurements ■ Robust metal design allows for use in harsh environments *For more details, please download the PDF (English version) or feel free to contact us.

• Sensors

Introducing Littelfuse's 60V DC contactor, the "DCNLR Series." It is ideal for safely disconnecting applications that require continuous use. It features a waterproof and dustproof design that withstands harsh environments with an IP67 rating. This product has a space-saving design and can be installed in any orientation. 【Features】 - Suitable for EV designs in low voltage systems of 100-200A 60Vdc - Complies with IP67 (waterproof and dustproof) - No polarity, can handle charge and discharge lines independently - Built-in coil suppressor - Sealed contacts ensure safety against arc leakage *For more details, please download the PDF (English version) or feel free to contact us.

• relay

The "SSO Series" is a calibrated, temperature-compensated compensation type 316/316L stainless steel pressure sensor. Being made of stainless steel, it has high media compatibility with corrosive liquids and gases, making it suitable for industrial measuring instruments and industrial control devices. Additionally, four types of mounting methods are available: diaphragm with welding ring, G1/8 threaded, 1/4NPT threaded, and 1/4NPT with a G1/8 threaded connection. 【Pressure Range】 ■200mbar to 35bar ■3psi to 500psi ■20kPa to 3.5MPa *For more details, please download the PDF (English version) or feel free to contact us.

• Pressure Sensor

The "EV101" is an AC-DC power unit specifically designed for EV fast chargers. By connecting up to 12 units in parallel, a charging system with a maximum output of 360kW can be constructed. It complies with various safety standards required for EV charging systems, contributing to a reduction in time from product development to market launch. 【Features】 ■ Parallel operation: Up to 12 units (total maximum output: 360kW) ■ Output voltage range: 150–1000Vdc ■ Efficiency: 96% peak ■ Operating temperature range: -40 to +75℃ *For more details, please download the PDF (English version) or feel free to contact us.

• power supply

The "PIC16F17576 Family" is a low-power MCU with built-in analog functions. It features a new low-power comparator and reference voltage combination that can operate even while the MCU core is in sleep mode, allowing for continuous analog measurements with a current consumption of less than 3.0µA. Equipped with an operational amplifier that has a software-controlled gain ladder, this feature allows for switching between multiple gain options with a single operational amplifier, reducing noise while maintaining accuracy and power efficiency. 【Features】 ■ Operating voltage range: 1.8V to 5.5V ■ The low-power comparator operates only when needed, reducing power consumption and enabling continuous analog measurements with a current consumption of less than 3.0μA ■ Equipped with up to four operational amplifiers and a 12-bit differential ADC with automatic averaging function *For more details, please download the PDF (English version) or feel free to contact us.

• Other electronic parts

Introducing the general-purpose heat sink '12KF196'. The material used is aluminum alloy. It has a height of 12.00mm and a width of 196.50mm. Please consult us regarding surface treatment and cutting lengths. 【Standard Specifications】 ■ Material: Aluminum alloy ■ Material grade: A6063-T5 ■ Extrusion tolerance: JIS H4100 Normal grade ■ Cutting dimension tolerance: ±0.5 within 300mm ■ Machining tolerance: JIS B-0405 Intermediate grade ■ Height: 12.00mm ■ Width: 196.50mm ■ Weight: 3.20kg/m *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "WEO128128H" is a 1.5-inch COG graphic OLED display equipped with grayscale functionality. It has a resolution of 128×128 dots and is equipped with the CH1120 IC, supporting 8080, SPI, and I2C interfaces, with a 1/128 duty cycle. The logic power supply voltage is 3V (VDD) and the display power supply voltage is 12V. The current at 50% display screen is 20mA (white @ VCC 12V / yellow @ VCC 14.5V). 【Features】 ■ High resolution, 128×128 pixels for clear visual display ■ Supports grayscale functionality ■ Low power consumption with a 3V operating voltage ■ Interfaces: 8080, SPI, I2C ■ Wide temperature range: -40℃ to +80℃ *For more details, please download the PDF (English version) or feel free to contact us.

• LCD display
• Organic EL

Introducing the high Q-value small air-core coils "0806SQ/0807SQ/0908SQ series." These coils feature an extremely high Q value (maximum Q factor: 130 @ 400MHz) and a high precision inductance tolerance (within 2% tolerance), making them suitable for matching and tuning applications in narrowband RF amplifiers. Additionally, a high-reliability version is available, capable of supporting space, military, and other critical applications. 【Features】 ■ Inductance range: 5.5nH to 27.3nH (within 2% tolerance) ■ Maximum Q value: 130 (0908SQ series @ 400MHz) ■ Ultra-small size and high current handling up to 4.4A ■ Flat top and bottom design for high precision pick-and-place applications *For more details, please download the PDF (English version) or feel free to contact us.

• Inductor Coil

The MC3416 is a small, low-power 3-axis digital output accelerometer. By integrating MEMS technology and control circuits into a single chip, it achieves high reliability and low power consumption, making it suitable for mobile applications such as smartphones and IoT devices. Additionally, it supports a wide measurement range from ±2g to ±16g and has a 16-bit resolution. It can be utilized in various applications such as motion detection, posture and tilt sensing, and vibration detection. 【Features】 ■ Measurement range: ±2g to ±16g ■ 16-bit resolution ■ Output data rate: 128 to 1,024Hz ■ Low power consumption (standby current: typical 4μA) ■ Ultra-compact: 2×2×0.92mm LGA package *For more details, please download the PDF (English version) or feel free to contact us.

• Sensors

The "ME500" is a pressure sensor that employs a piezoresistive method. It features thermal compensation using a laser-adjustable PTC resistor, and due to its ceramic construction, it achieves high linearity across the entire range. Made of Al2O3 (alumina) ceramic, it can also accommodate sapphire specifications (upon consultation). As a result, it exhibits excellent chemical resistance, robustness, and biocompatibility. It is capable of measuring the flow of various solutions used in semiconductor manufacturing equipment and food production equipment, as well as alkaline liquids and corrosive gases. 【Pressure Range】 ■ 0.5 to 800 [bar] ■ 7 to 11,600 [psi] ■ 0.05 to 80 [MPa] *For more details, please download the PDF (English version) or feel free to contact us.

• Pressure Sensor

The MCU of the "AVR SD Family" is equipped with functional safety mechanisms designed to support applications that require strict safety guarantees. As the main processor for critical functions such as detecting thermal runaway and monitoring sensor data (e.g., rotary position), it can be utilized with minimal power consumption. Additionally, it is an excellent candidate as a coprocessor in complex systems to mirror or offload safety-critical functions for applications targeting higher safety levels up to ASIL D and SIL 3. **Features** - Operating voltage range: 2.7V to 5.5V - Dual-core lockstep AVR CPU operating at up to 20MHz - Compliance with ASIL C (ISO 26262) and SIL 2 (IEC 61508) safety standards - Error Correction Code (ECC) on Flash, SRAM, and EEPROM - Two 10-bit, 100ksps A/D converters *For more details, please download the PDF (English version) or feel free to contact us.*

• Other electronic parts
• converter

The Coilcraft P32xx series toroidal common mode chokes are ideal noise filters for power circuit design, such as switching power supplies and AC line filters. With a toroidal core structure and single-layer winding design, they effectively suppress high-frequency noise in the 100-300 kHz range. They powerfully eliminate common mode noise and power supply noise generated on power lines. The lineup includes the "High L series" with high inductance design and the "Standard series" with low DCR and high current capability, allowing you to choose the optimal model for your application. Additionally, with a high-reliability design certified by UL (Class B 130°C) and compliant with RoHS/REACH, they can be safely used in various fields such as industrial equipment power supplies, communication devices, home appliances, and PoE devices. Despite their small size, they demonstrate excellent EMI countermeasure performance and enhance the design flexibility of filter circuits, enabling robust circuit design against noise.

• Inductor Coil
• EMC countermeasure products
• power supply

【Product Overview】 This module allows you to incorporate PoE circuitry into your product by mounting it on a host board. Even without expertise in PoE design, you can develop PoE-enabled products by adopting this module. We also provide design support from the circuit design stage, so please feel free to contact us. 【Benefits of PoE】 When supplying power in locations without outlets, if a LAN cable can be run, power can be supplied using PoE technology. It is utilized in outdoor surveillance cameras and IoT devices within large factories. 【Features】 ■ Significantly reduces the number of components through the module ■ Simplifies peripheral circuits ■ Contributes to product miniaturization due to its ultra-compact size ■ Available for purchase from a single unit ■ Excellent design support available

• power supply
• converter
• Switching Power Supply

We would like to introduce the 1.54-inch OLED display with PCB that we handle, the 'WEA016080 series'. It offers a resolution of 160×80, and the integrated PCB simplifies your PCB development process. It also includes mounting holes for easy installation, providing a reliable solution for various applications. 【Features】 ■ High resolution: 160×80 pixels for clear visual display ■ Excellent contrast: Vivid images with a ratio of 10,000:1 ■ Low power consumption: Low power usage at a 3V operating voltage ■ COG structure: Supports built-in driver IC and 4-wire SPI ■ Wide temperature range: Operating temperature range from -40℃ to +80℃ *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "MCU PIC16F13145 Family" meets the demands for on-chip digital logic with its new Configurable Logic Block (CLB) module. This eliminates the need for external logic chips. The CLB contains 32 basic logic elements, each of which can be used as AND/OR/NAND/NOR gates, buffers/inverting buffers, etc. Please feel free to contact us if you have any inquiries. 【Features】 ■ Operating voltage range: 1.8V to 5.5V ■ CLB contains 32 basic logic elements ■ Equipped with a 10-bit ADC (up to 300ksps) and an 8-bit DAC ■ Two high-speed comparators with a response time of 50ns ■ High-precision internal oscillator with ±2% accuracy (up to 32MHz) *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "TCO SE Series" is a temperature fuse that uses bimetal. With a size of 4.7×2.8×1.23(H)mm, which is among the smallest in the industry, the trip temperature settings are 72℃, 77℃, 82℃, and 85℃ (all with a tolerance of ±5℃). Additionally, it complies with the RoHS directive and achieves higher humidity resistance than typical protection devices by adopting a bimetal mechanism with the highest level of corrosion resistance. 【Features】 ■ 48V/5A (compliant with USB PD 240W standard, supports up to 54V) ■ Rapid response to protect against overheating and overcurrent ■ Instantly cuts off abnormal overcurrent ■ Corrosion resistance ■ RoHS compliant, halogen-free *For more details, please download the PDF or feel free to contact us.

• fuse

We would like to introduce our general-purpose heat sink '12KF101' that we handle. The material is aluminum alloy, with a grade of A6063-T5. The extrusion tolerance is JIS H4100 standard grade, the cutting dimension tolerance is ±0.5 within 300mm, and the machining tolerance is JIS B-0405 intermediate grade. Please feel free to contact us when you need assistance. 【Standard Specifications (Partial)】 ■ Material: Aluminum alloy ■ Grade: A6063-T5 ■ Extrusion Tolerance: JIS H4100 Standard Grade ■ Cutting Dimension Tolerance: ±0.5 within 300mm ■ Machining Tolerance: JIS B-0405 Intermediate Grade *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

We would like to introduce our "ESCC Certified Hi-Rel (with extended wire) Platinum Temperature Sensor." The Hi-Rel Pt temperature sensor is available with resistance values from 100Ω to 2000Ω and a temperature range from -200°C to +200°C. Both Flight Model (FM) and Engineering Model (EM) are available, making it suitable for high-reliability applications in the aerospace and automotive industries. 【Features】 ■ Strong thermal cycle resistance ■ Strong vibration resistance ■ Compact dimensions (W×L×H): 2.0×2.2×1.1mm ±0.2mm ■ Lightweight ■ 10mm platinum wire *For more details, please download the PDF or feel free to contact us.

• Sensors
• Temperature Sensor

The "HDO Series" is a pressure sensor that is compact yet equipped with temperature compensation features. It is highly suitable for applications such as medical devices and air conditioning systems, offering three types of pressure measurement: gauge pressure, differential pressure, and absolute pressure, within a low pressure range of 10 mbar to 5 bar. There are high-precision and standard versions available, allowing you to choose products suitable for your operating environment based on specifications such as offset and hysteresis from the data sheet. 【Features】 ■ Pressure range: 10 mbar to 5 bar (1 kPa to 500 kPa) ■ Output: mV output ■ High-precision pressure sensor ■ Temperature compensated ■ Suitable measurement media: non-corrosive, non-ionic working fluids ■ Compact SMD package (11.9 mm × 15.0 mm) ■ RoHS and REACH compliant *For more details, please download the PDF or feel free to contact us.

• Sensors
• Pressure Sensor

The ME504 is a piezoresistive pressure sensor made of ceramic with a diameter of 18mm. It is composed of Al2O3 (alumina) ceramic, offering excellent chemical resistance, robustness, and biocompatibility. It is capable of measuring the flow of various solutions, alkaline liquids, and corrosive gases in semiconductor manufacturing equipment and food production equipment. 【Features】 ■ Excellent durability, corrosion resistance, and wear resistance ■ Pressure range ・0.5 to 800 [bar] ・7 to 11,600 [psi] ・0.05 to 80 [MPa] *For more details, please download the PDF or feel free to contact us.

• Sensors
• Pressure Sensor

We would like to introduce our heat sink for mounted circuit boards, the '15VF033'. The material used is aluminum alloy, specifically A6063S-T5, with the terminal part made of SPCC tin-plated steel. The extrusion tolerance is JIS H4100 standard grade, and the cutting dimension tolerance is ±0.5 within 300mm. Please feel free to contact us when you need assistance. 【Standard Specifications (Partial)】 ■ Material: Aluminum alloy ■ Material: A6063S-T5; Terminal part: SPCC tin-plated ■ Extrusion tolerance: JIS H4100 standard grade ■ Cutting dimension tolerance: ±0.5 within 300mm ■ Machining tolerance: JIS B-0405 intermediate grade *For more details, please download the PDF or feel free to contact us.

• Other electronic parts