グローバル電子 List of Products and Services

The "K Series" is a configurable single-pole hydraulic magnetic circuit breaker for AC or DC applications. The maximum rated voltage is either 65 or 80 VDC, or 250 VAC specifications. This hydraulic magnetic circuit breaker has high temperature stability and is minimally affected by ambient temperature, eliminating the need for a cooling fan. 【Features】 ■ Ultra-compact fluid electromagnetic design ■ Options for PCBA, push-on tabs, or screw terminals ■ Instantaneous, short-time, and medium-time delay options * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts
• power supply
• others

The "DS11/DT31 series" is a smart connector that allows devices to be used as IoT devices with wireless LAN communication capabilities by embedding or connecting them to equipment. The "DS11" power entry module can be embedded in devices. Additionally, the "DT31," equipped with a C14 power inlet, can be connected to any device. 【Features】 ■ DS11 Power Entry Module ■ WiFi 802.11b/g/n or Bluetooth 4.2 connection ■ Relay switching via WiFi (cloud) ■ Integrated energy live measurement with a maximum update rate of 60 seconds * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• connector
• Other Connectors
• Other electronic parts

We would like to introduce the Samtec "FLEXIBLE WAVEGUIDE Series" that we handle. Samtec's new high-frequency micro waveguide technology is designed to target millimeter-wave frequencies and support system requirements. Samtec's innovative technology provides a flexible and user-friendly solution while maintaining low insertion loss and offering a more cost-effective alternative. 【Features】 ■ Flexible and dynamically stable ■ Loss performance close to zero ■ Ultra-compact form factor ■ Compatible with high frequency and microwave *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• High frequency/microwave parts
• Other electronic parts
• cable

The "FXP Series" is a sealed fuse holder designed for high power applications. It achieves a maximum current rating of 25A (IEC) / 45A (UL) and can handle up to 4 watts of power at an ambient temperature of 50°C. The installation uses a snap-in method and is designed primarily for indoor use with an IP40 protection rating. 【Features】 ■ Rated Voltage: 500VAC (VDE) ・ 600VAC/VDC (UL/CSA) ■ Rated Current: 25A (VDE) 45A (UL/CSA) ■ Allowable Power: 8W/25A @ Ta 23℃ ■ Compatible with 6.3mm × 32mm fuses * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• fuse
• Other electronic parts
• others

The "URB1270" is a lithium-ion phosphate battery with high safety that does not lead to smoke or fire. It can be charged using a charger for lead-acid batteries, achieving a longer lifespan. Additionally, it has achieved significant weight reduction (about one-third the weight for the same volume) and improved operational stability. 【Features】 ■ 12.8V/7.6Ah/97Wh ■ Size: 152×65×92mm ■ Weight: 1.0±0.1kg ■ Compliant with IEC62133/UL2054 ■ Protection circuits: overvoltage, over-discharge, overcurrent, overheating, short circuit, cell balance *You can download the English version of the catalog. *For more details, please refer to the PDF document or feel free to contact us.

• Lithium-ion battery
• Charger
• Other power sources

The "MATEnet Heavy-Duty Waterproof Connector with Insert" is a product that combines high-performance MATEnet terminals with a robust housing that excels in reliability and expandability. It enables hybrid connections for Ethernet and power, supporting data transfer rates of up to 1Gbps. UTP and STP cables can be used within the same connection system. It is suitable for use in construction machinery and large commercial vehicle chassis. 【Features】 ■ High modularity for flexible combinations ■ Supports high-speed communication from 100Mbps to 1Gbps ■ Compliant with IEEE802.3bp, 100BASE-T1, and 1000BASE-T1 standards ■ Multiple wire sizes can be selected according to application needs ■ Reliable contact retention thanks to a secondary locking mechanism ■ Compliant with IP67 and IP69K (with back shell) standards *For more details, please refer to the materials available for download in PDF format. Feel free to contact us with any inquiries.

• Waterproof Connector

Global Electronics offers the 'AI Module' developed by NTQ Solution, which enables the easy implementation of AI-equipped systems on edge computers, standalone PCs, and AWS servers. This module can be utilized for a wide range of system solutions, including the detection of human skeletal structures and objects, monitoring and tracking of crowd movements or individual behaviors, intrusion detection in hazardous areas, and gesture recognition. The extracted data can also be integrated with RPA for the automation of business processes. Our company is capable of supporting the entire process from proof of concept (PoC) to commercialization based on our extensive know-how. 【Features】 ■ Real-time detection of multiple people's eyes, noses, ears, skeletons, as well as posture, movements, and gaze ■ AI has been trained on 128 types of objects ■ Analyzes movements from the skeletal structure and shape of hands to understand gestures ■ Detection is possible even with inexpensive cameras, simplifying hardware *You can view materials introducing application examples from the download link below. Please feel free to contact us for inquiries.

• Personal authentication

The "MISO170-F" is an output-isolated isolation amplifier module with a 0-5V input and a 4-20mA output specification. It has a built-in isolated DC/DC converter that supplies power to both the primary and secondary sides of the amplifier, making it easy to realize an analog isolation system with a 4-20mA output. The load resistance range is 0 to 750Ω, and it complies with RoHS2 (10 substances). [Examples of Applications] ■ Plant control equipment ■ Power monitoring equipment ■ High-voltage power supply devices ■ Outdoor 4-20mA long-distance transmission equipment *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Other electronic parts

We handle a wide range of "Organic EL Display Modules" manufactured by WINSTAR Display. They offer high contrast and excellent visibility, with sizes ranging from 0.96 to 5 inches. With a thickness of just 1.26mm, they are suitable for use in handheld measuring devices and non-contact thermometers. They can also be utilized in capacitive touch panels. 【Specifications】 ◎ Viewing Angle: Horizontal/Vertical: 175° ◎ Contrast: 2000:1 ◎ Lifespan: 100,000 hours ◎ Ambient Light Compatibility: Yes ◎ Resolution (Gap): 0.02mm *For more details, please refer to the materials or feel free to contact us.

• LCD display

We would like to introduce the "RJ45 Jack" handled by Global Electronics Co., Ltd. It supports a wide range of applications, including FA equipment and routers. If you are considering alternatives for EOL products or price reductions, please feel free to consult with us. We will guide you to the appropriate products from our extensive lineup. 【Features】 ■ RJ45 Jack ■ EOL Alternatives ■ Price Reduction ■ Wide Range of Lineup * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other Connectors

We would like to introduce the "Low Humidity Digital Transducer" handled by Global Electronics Co., Ltd. With a digital interface and a compact screw-in housing, system integration is easy. This product is suitable for process control in industrial processes sensitive to condensation. 【Features】 - Ideal for process control based on dew point monitoring down to Tdp -40°C - Easy integration into compressed air systems with screw-in housing - Continuous and highly accurate measurement of relative humidity and temperature - Humidity sensor calibrated at the factory with digital I2C output *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• Converters and Transducers

The "DRM-A Series" is an SMT fuse designed for high altitudes up to 50,000 feet (15,240 m ASL). Gold-plated terminals prevent whiskering and overcome the risk of short circuits. The combination with the FRM-A, designed specifically as a fuse holder for DRM-A, is suitable for circuit protection of equipment operated in harsh environments such as avionics. 【Features】 ■ Rated Voltage: 250VAC/125VDC ■ Rated Current: 0.5–8A ■ Interrupting Capacity: 100–200A @ 125VAC/VDC ■ Melting Characteristics: Quick-Acting F ■ Operating Temperature Range: -55℃ to +125℃ *For more details, please refer to the PDF document or feel free to contact us.

• fuse

The "FRM-A Series" is designed for high altitudes up to 50,000 feet (15,240 m ASL) and features SMT fuses: a fuse holder dedicated to DRM-A. It is suitable for circuit protection of equipment used in various harsh environments, such as avionics, where compactness, lightweight, and robustness are required. In addition to its compact design, it has passed additional tests for vibration, shock, and salt spray, achieving very high robustness and IP67 dust and water protection. 【Features】 ■ Rated Voltage: 250VAC/125VDC ■ Rated Current: 8A (UL/CSA) ■ Allowable Power: 1.6W/6.3A @Ta 23℃ ■ Dust and Water Protection: IP67 ■ Operating Temperature Range: -55℃ to +85℃ *For more details, please refer to the PDF document or feel free to contact us.

• fuse

The "Power Tube Connector Series" is a product suitable for high-power applications in various EV and hybrid vehicles. The power tube header is available in two orientations: 180 degrees or 90 degrees, featuring a sophisticated round design. This product accommodates a wide range of wire sizes from 35 to 150 mm². 【Features】 ■ Operates in harsh environments due to vibration performance compliant with IP6K9 and ISO16750-3 profiles ■ Supports correct connections with Connector Position Assurance (CPA) and color variations ■ Ensures safety during operation by adopting HVIL ■ Improves maintainability with a reliable and simple round design ■ Provides excellent EMI protection performance with 360-degree shielding *For more details, please refer to the PDF document or feel free to contact us.

• connector
• tube

We would like to introduce the zSFP+ (SFP 28/56) connectors and cages handled by Global Electronics Co., Ltd. Data transfer at up to 28Gbps NRZ and 56Gbps PAM-4 for hyperscale data centers and networking switch applications. Designed with backward compatibility with SFP/SFP+ products, allowing for hot-swapping with existing SFP+ connectors. 【Features】 ■ Designed to transfer data with signals up to 28Gbps (NRZ) and 56Gbps (PAM-4) ■ Adopts the same mating interface and cage dimensions as SFP and SFP+ connectors, ensuring backward compatibility ■ Options for heatsinks, LEDs, and plating are available ■ Additional configurations for light pipes are also available *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof Connector

The "Heavy-Duty Waterproof Connector Series" is a product that combines high-performance MATEnet terminals with a heavy-duty shielded connector series housing that offers robustness, reliability, and expandability. Designed with a modular approach that allows for high flexibility in combinations, it can adapt to various needs. Additionally, it can use unshielded twisted pair (UTP) and shielded twisted pair (STP) within the same connection system. 【Features】 ■ Compatible with unshielded twisted pair (UTP) and shielded twisted pair (STP) cables ■ Enables hybrid connections for Ethernet and power, allowing for multiple wire sizes to be selected according to application needs ■ Tab housing options for inline and panel mount, equipped with standard 180-degree and 90-degree headers *For more details, please refer to the PDF materials or feel free to contact us.

• Waterproof Connector

The "Ag5700 series" is a PoE+ compatible surface mount small PD module that complies with the IEEE802.3af, at, and bt standards. The module, equipped with a signature circuit, simplifies your PoE design and is suitable for devices with space constraints due to its compact size of 32mm x 21mm. Please feel free to contact us if you have any inquiries. 【Features】 ■ Output Voltage: 12V/24V ■ Output Power: 24W (Max. 30W) ■ Operating Temperature: -40℃ to +85℃ ■ Surface Mount ■ 1,500V Isolation ■ Overload, Short Circuit, and Overheat Protection Functions Included *You can download the English version of the catalog.

• Other electronic parts

We would like to introduce the "Pulse Transformer for 2.5G to 10G BASE LAN" manufactured by TAIMAG, which we handle. It supports high-speed communication, high voltage resistance, and PoE. We offer a lineup of pulse transformers for 10G BASE LAN that can withstand 5kV/7kV, contributing to products that require both high-speed communication and strict voltage resistance. We also have PoE-compatible products available, and we can propose products tailored to your specifications, so please feel free to consult with us. 【Features】 ■ Pulse transformers for LAN ■ High-speed communication ■ High voltage resistance ■ PoE *You can download the English version of the catalog.

• transformer

We would like to introduce the "Bridge Diode/Pulse Transformer Integrated RJ45 Magjack" manufactured by YDS, which we handle. We can accommodate small lot orders as well. We will guide you to suitable products based on your needs and circumstances. If you are considering reducing board area, simplifying design, or lowering total costs, please feel free to consult with us. 【Features】 ■ RJ45 Magjack ■ Integrated Diode/Pulse Transformer ■ PoE/PoE+ compatible ■ Small lot orders available *You can download the English version of the catalog.

• Other electronic parts

The "EP2.5 Surface Mount Header" is a wire-to-board connector designed for compact low-power and signal systems. This product supports more efficient board manufacturing processes, such as automatic assembly using chip mounters and soldering via reflow. It features a polarity tab to prevent incorrect insertion of the board-side connector, a positive latch function that ensures a complete fit confirmed by sound, and low insertion force (LIF) terminals that enable ergonomic assembly. 【Features】 ■ Supports automatic assembly with chip mounters and reflow soldering ■ Reduces the risk of connection failures due to solder bridges compared to through-hole headers ■ Compatible with existing EP 2.5 connectors and similar 2.5mm pitch products ■ Materials compliant with UL94 V-0 and IEC60335-1 glow wire test (GWT) flammability standards ■ UL and VDE certified *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "5G Phantom NGP Antenna Series" supports both 617-7125MHz and 698-7125MHz without the need for a ground plane. It supports global cellular coverage even in areas requiring low frequencies in the 600MHz band. With a compact design compliant with IP67, it offers over 95% high average efficiency up to 4200MHz and a maximum antenna gain of 8.0dBi. Please feel free to contact us if you have any inquiries. 【Features】 ■ Compatible with cellular networks worldwide ■ Reduced gain ripple in the horizontal (azimuth) direction ■ Excellent stability with minimal gain shift ■ Connectable in any location ■ Reduced signal dropout with a uniform azimuth pattern ■ Robust construction *For more details, please refer to the PDF document or feel free to contact us.

• antenna

The MS4525DO is a compact PCB mount pressure transducer that is fully calibrated and features temperature compensation with a total error band (TEB) of less than 1.0% across the entire pressure range. It is a robust ceramic transducer available with side port or top port options, capable of measuring absolute pressure, gauge pressure, differential pressure, vacuum, or compound pressure in the range of 1 to 150 psi. Please feel free to contact us if you have any inquiries. 【Features】 ■ Measurement pressure range: 1 psi to 150 psi ■ Total error band: ±1.0% ■ Temperature compensated ■ I^2C or SPI output *You can download the English version of the catalog.

• Converters and Transducers

The "CMS Series" is a compact and cost-effective pressure sensor manufactured by Merit Sensor Systems, known for its user-friendliness. It excels in versatility with its pressure range, footprint, and compatibility with digital outputs, making it widely applicable in robotic arms, analytical and measuring instruments, home appliances, and HVAC systems. It is scheduled for release soon, with additional options expected to be added in the future. 【Specifications】 Size: 6.8mm × 6.8mm Operating Temperature Range: -40℃ to 85℃ Pressure Range: 2psi (13.8KPa) to 150psi (1MPa) Pressure Type: Absolute pressure, Gauge pressure Output: Digital (I2C and SPI) Supply Voltage: 2.7V to 5.5V Mounting: SMD *You can download the English version of the catalog. Please feel free to contact us with any inquiries.

• Sensors

SCHURTER's SMD fuse 'UHP Series' achieves a quick trip time of approximately 15 seconds for a rated current of 100A and for currents up to twice the rated current. It can be used in outdoor industrial equipment, long-distance communication devices, data center equipment, and power tools, where there is a potential for very high overcurrents, contributing to circuit protection from high currents and space-saving on circuit boards. 【Features】 ■ Compact design of 10.2×11.4×6.8mm ■ Maximum interrupting capacity of 3,000A ■ Packaging unit: 100 or 500 pieces *You can view the materials (English version) from "PDF Download." Please feel free to contact us for inquiries.

• fuse

The "UHS Series" is an SMD fuse that maintains a compact design with a side length of 10mm or less, achieving a rated current of 100A and a rapid trip time of 10 seconds for currents approximately twice the rated value. It contributes to space-saving on the circuit board while providing circuit protection from high currents. Additionally, it has a breaking capacity of 600A at 50VDC and 2,000A at 16VDC. 【Features】 ■ Rated Voltage: 50VDC ■ Rated Current: 50–100A ■ Breaking Capacity - 60A@50VDC - 1,000A@32VDC - 2,000A@16VDC ■ Melting Characteristics: Quick-Acting F ■ Operating Temperature Range: -55℃ to +125℃ *You can download the English version of the catalog. *For more details, please refer to the related links or feel free to contact us.

• fuse

The "UHP Series" is an SMD fuse that achieves a rapid trip time of 15 seconds for a rated current of 100A and approximately double the rated current, all while maintaining a compact design. It contributes to space-saving on the circuit board while providing circuit protection from high currents. Additionally, it has a breaking capacity of 3,000A at 63VDC and 2,000A at 80VDC. 【Features】 ■ Rated Voltage: 80VDC ■ Rated Current: 50–100A ■ Breaking Capacity ・ 2,000A @ 80VDC ・ 3,000A @ 63VDC ■ Operating Temperature Range: -55℃ to +125℃ * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

• fuse

The "5121 Series" is a C14 inlet that features a compact design and incorporates a line filter with high noise attenuation capability. It is equipped with an M80 filter compliant with IEC60601-1, and there are three variations for installation methods. Additionally, when used with a V-Lock compatible C13 connector, it enables safer operation across a wide range of applications. 【Features】 ■ Connector Type: C14 (IEC60320-3) ■ Rated Current ・IEC-10A@Ta40℃/250VAC;50Hz ・UL/CSA-15A@Ta40℃/250VAC;50Hz ■ Leakage Current ・Standard version: <0.5mA (250V/6060Hz) ・Medical version (M80): <80μA (250V/60Hz) *You can download the English version of the catalog.

• filter

The "Inlet 6080/Code Set SC54C13KS" is a connector set that complies with IP54 dust and water protection. The V-Lock cable retention mechanism prevents unintended disconnection of the power cable, contributing to safe operation. It is suitable for industrial and medical equipment used in environments where water droplets may occur, and it also meets the needs of food processing equipment. 【Features】 ■ Rated Current - IEC: 10A/250VAC; 50Hz - UL/CSA: 15A/250VAC; 60Hz ■ Operating Temperature Range: -25℃ to +70℃ ■ Dust and Water Protection: IP54 *You can download the English version of the catalog.

• Board to Board Connectors

The "EP2.5 Surface Mount Header" is a wire-to-board connector designed for compact low-power and signal systems. This product supports more efficient PCB manufacturing processes, such as automatic assembly by chip mounters and soldering by reflow. Additionally, it features a polarity tab to prevent incorrect insertion of the board-side connector, a positive latch function that ensures complete mating confirmed by sound, and low insertion force (LIF) terminals that enable ergonomic assembly. 【Features】 ■ Supports automatic assembly by chip mounters and reflow soldering through surface mount technology ■ Reduces the risk of connection failures due to solder bridges ■ Compatible with existing EP 2.5 connectors and similar 2.5mm pitch products ■ Made from materials that comply with UL94V-0 and IEC60335-1 glow wire test flammability standards ■ UL and VDE certified *For more details, please download the PDF or feel free to contact us.

• Board to Board Connectors

The "AMPSEAL series" is a connector designed for wire-to-board applications that can withstand harsh environments. It is sealed to accommodate extreme temperatures and humidity. Currently, we are expanding the product series by adding multiple connector housings, terminals, and other accessories. 【Features】 ■ Improved design flexibility with connectors and terminals compatible with AWG20-24 wires ■ Enhanced reliability with CPA to ensure secure mating of connectors ■ Reduced strain on wires with the adoption of a tool-less backshell ■ User-friendly design with an easy-to-use tool-less backshell *For more details, please download the PDF or feel free to contact us.

• Board to Board Connectors

Silvertel offers a wide range of module products for PoE, including PSE modules, DC-DC converters for inputting to PSE, and highly miniaturized PD modules. These PoE+ modules, compliant with IEEE standards, feature 1,500V isolation and class detection for PoE devices, allowing for designs with minimal external components. Additionally, when inquiring about Silvertel products, support for circuit design by Silvertel's specialized engineers is available. This time, we will introduce module products for PoE+ (IEEE802.3at) from Silvertel's range of PoE modules, covering both PD and PSE. *For more details, please refer to the downloadable materials (Introduction to Silvertel PoE+ Module Series, Datasheet).

• Other power sources

The "OXY-Flex" is a sensor designed to measure the oxygen concentration in air or inert gas mixtures in confined spaces that are difficult to access, such as ventilation pipes, flues, and containers. The oxygen sensor is mounted at the tip of a stainless steel probe and is protected by a stainless steel sintered cap that functions as a large particle filter and frame trap. The output can be selected from 4-20mA, 0-10Vdc, or RS232. 【Features】 ■ High precision linear output ■ Measurement temperature range of -100 to +400℃ (high-temperature type) ■ Can be calibrated with fresh air (20.7% O2) or other known O2 concentrations ■ Enclosed in a sealed aluminum die-cast housing with the included oxygen sensor probe and Amphenol Ecomate connector * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "CMS Series" is a new product pressure sensor that is compact and low-cost. The operating temperature range is -40°C to +85°C. It can be used in general industrial applications as well as in analyzers and measuring instruments. It excels in versatility with pressure range, surface mount, and digital output options. 【Features】 ■ Size: 6.8mm × 6.8mm ■ Operating temperature range: -40°C to +85°C ■ Pressure range: 2 psi (13.8 kPa) to 150 psi (1 MPa) ■ Pressure type: Absolute pressure, gauge pressure ■ Output: Digital (I2C and SPI) *You can download the English version of the catalog. *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "CORCOM AHV Series" is an EMI filter designed for high current and high voltage applications. Developed for EVI/BESS, it contributes to space and cost savings through its compact footprint design. It features low leakage current. Please feel free to contact us when you need assistance. 【Features】 ■ Products for high current and high voltage applications (maximum: 760VAC 1000A) ■ Compact footprint design ■ Contribution to space and cost savings ■ Low leakage current * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• filter

The "CORCOM Three-Phase EMI Filter" is a product that can be used in applications such as frequency converters, motor drives, and machine tools. It reduces unwanted electromagnetic interference (EMI) noise within the conductive area of electromagnetic disturbance resistance. These filters, rated from 3 to 1600A, come with various terminal connection options and can be used with Delta or WYE wiring. 【Features】 ■ Can be mounted on a chassis/DIN rail ■ Suppresses EMI noise ■ No mounting screws required ■ Standard attenuation performance ■ Lightweight, compact, and easy to install * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• filter

At Global Electronics Co., Ltd., we handle RJ45 mag jacks. The related links include a specification sheet for our product lineup, detailing transfer rates, series, tab up/down, ports, and the presence or absence of LEDs. We will guide you to suitable products from a wide range of options that are compatible with other companies, so please consult us when considering alternatives for EOL products, small lot items, or price reductions. 【Specifications (partial)】 ■ Transfer rate: 10Base-T ■ Series: 12F/14F-1X ■ Tab: Down ■ Port: 1×1 ■ LED: Both available and not available *For more details, please refer to the related links or feel free to contact us.

• Other Connectors

The RRC2054 is a lithium-ion smart battery that combines high safety standards compliant with certification standards from around the world. It complies with global safety certification standards such as IEC62133, PSE, and UL. With SMBus communication capabilities, it allows for the reading of battery status, including operational time, temperature information, and electrical specifications, enabling safer and more efficient management. 【Features】 ■ 14.40V / 3.40Ah / 49.70Wh ■ Size: 85.1 × 77.4 × 22.4mm ■ Battery level display function with LED * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

• Lithium-ion battery

The RRC1130 is a lithium-ion battery that combines high safety standards in accordance with certification standards from around the world. With the I2C communication function, it enables the reading of battery status such as remaining charge, temperature information, and electrical specifications, achieving safer and more efficient management. Due to the manufacturer's policy of not conducting EOL (End of Life) for the product, you can introduce it with confidence. 【Features】 ■ 3.80V/3.81Ah/14Wh ■ Size: 84×61.2×6.7mm ■ Complies with worldwide safety certification standards such as IEC62133, PSE, and UL ■ Dedicated charger (sold separately) - Optimized charging process for this product - Power supply included that meets safety standards of each country * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

• Lithium-ion battery

The "SEARAY(TM) 0.80mm Pitch Ultra High-Density Array" is a product characterized by a 0.80mm pitch grid. With a total of up to 500 Edge Rate(R) contacts optimized for signal integrity, it enables extremely flexible routing of signals and grounds. It also offers features such as a maximum of 10 rows, 50 contacts per row, stack heights of 7mm or 10mm, and high-speed performance of 28+ Gbps. 【Features】 ■ 0.80mm (.0315") pitch grid ■ Performance: up to 17.5GHz/35Gbps ■ Robust Edge Rate(R) contacts ■ Up to 500 I/O ■ Stack heights of 7mm and 10mm * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

The "0201CT series" is a chip inductor that excels in communication devices using high frequencies, featuring a low mounting area, low height, high Q value, and low DCR. It can be utilized for impedance matching in high-frequency circuits and as a bias tee to separate input DC and output AC, with a lineup of 14 constants ranging from 0.06nH to 22nH. Reliability is certified AEC-Q200 Grade 1 (-40°C to +125°C), and it meets environmental standards for halogen-free RoHS compliance. 【Features】 ■ Chip inductor for high frequency ■ Low mounting area (0.58mm × 0.46mm) ■ High Q value and low DCR ■ AEC-Q200 Grade 1 (-40°C to +125°C) certified * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

The WEA009616A is a commonly used small-sized 0.84-inch PMOLED organic EL display. This product features a built-in SSD1306 IC, has a wide temperature range, and comes with a substrate, making development easy with the use of a BtoB connector. Additionally, the OLED offers good visibility, is ultra-thin, lightweight, and has low power consumption, making it suitable for handheld devices and other small equipment. 【Features】 ■ Module size: 33.0×10.0×2.45mm ■ Emission colors: White, Yellow, Light Blue ■ Interface: Supports I2C ■ Resolution: 96×16 dots, AA is 21.104×3.504mm ■ Operating temperature: -40℃ to 80℃ ■ Storage temperature: -40℃ to 85℃ * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

• LCD display

The WEA012832E is a 1.04-inch graphic OLED that can be easily mounted to equipment and products due to the mounting holes fixed on the substrate. The GT21L16T1W font IC is compatible with 15×16 dots and the basic Japanese kanji (Unicode), containing a total of 150 country character fonts. The logic power supply voltage is 3V or 5V, with a driving duty of 1/32, and the current consumption is 20mA@VIN3.3V (Typ.) when using 50% of the display area. 【Features】 ■ Module size: 35.4×23.5×1.8mm ■ Emission color: White, Yellow ■ Interface: Supports SPI ■ Resolution: 128×32 dots, AA is 25.58×6.38mm ■ Operating temperature: -40℃ to 80℃ ■ Storage temperature: -40℃ to 85℃ * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

• LCD display

The "SCHURTER 4783 Series" is a C13 connector equipped with a V-Lock cord retention mechanism. At first glance, this product appears to be a standard connector, and it can smoothly connect with a C14 inlet. However, when connecting to the inlet, the latch at the top engages with the side of the V-Lock compatible inlet, forming a robust lock. To disconnect from the inlet, it is necessary to press the lever at the top of the product while keeping the lock released, which prevents unintended disconnection of the power cord and ensures safe operation. 【Features】 ■ Connector shape: C13 (compliant with IEC 60320-1) ■ Rated current - IEC-10A 250VAC: 50Hz - UL/CSA-15A 250VAC: 60Hz ■ Operating temperature range: -25℃ to +70℃ * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

• connector

The "XGL4012 Series" is an inductor suitable for power line line filters with extremely low loss. With a wide lineup ranging from 0.10 to 1.2μH, it can accommodate a variety of applications. Due to the soft saturation characteristic of the metal core, there is no sudden decrease in inductance value. Additionally, it is certified for reliability under AEC-Q200 Grade 1 (-40℃ to +125℃), and it meets environmental standards as halogen-free RoHS compliant. 【Features】 ■ Extremely low loss closed magnetic circuit power inductor ■ Supports a wide range of inductance values ■ Soft saturation ■ AEC-Q200 Grade 1 (-40℃ to +125℃) certified *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• Inductor Coil

The "WEP012832A-CTP" is an organic EL with a capacitive touch panel that has two options depending on the application. One option uses mounting holes to secure the module, while the other allows for a BtoB connector. There are also many other options available, including connections for hot bar soldering, BtoB connectors, and FPC with connectors. Additionally, we offer mini vibration motors and buzzers, so please feel free to consult us when needed. 【Features】 ■ Module size: 66.5×35.0×10.55mm ■ Emission colors: white, yellow, blue ■ CTP controller: FT6336U with I2C interface ■ Resolution: 128×32 dots ■ Operating temperature: -20℃ to +70℃ ■ Storage temperature: -40℃ to +85℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Organic EL