グローバル電子 Product Lineup

This product uses a SAMTEC SEARAY 400-pin connector for the expansion connection of the output interface of the NVIDIA Jetson TX1/TX2 module. The SEARAY series from Samtec is a high-speed, high-density open pin field array product. It is suitable for applications such as drones and image processing-related products. 【Features】 ■ Connector mounted on NVIDIA module board ■ Narrow pitch multi-pin high-speed connector ■ Samtec connectors are also used in other modules * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Board to Board Connectors
• Other Connectors

The WEG010016J is a 3.84-inch, COB type, 100×16 dot monochrome graphic PM OLED. This module incorporates the WS0010 control IC and supports 6800 (default), 8080, and SPI interfaces. Compared to general monochrome LCDs, OLEDs offer high contrast, with a darker background color, and the display effect is beautiful and clear. 【Features】 ■ High contrast, fast response speed, wide viewing angle ■ Display colors are white, yellow, blue, and green ■ Supply voltage is 5V, with a duty cycle of 1/16 ■ Supports 6800, 8080, and SPI interfaces ■ Storage temperature -40℃ to 85℃, operating temperature -40℃ to 70℃ * For more details, please refer to the PDF documentation or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts
• LED Module
• Organic EL

The "WF50F" is a 5-inch landscape-type IPS TFT LCD with a resolution of 800x480. It has a built-in ST7262 driver IC and supports a 24-bit RGB interface. The contrast ratio is 1000 (typical). The "WF50FSWAGDNN0" is a high-brightness type with a brightness of 1000 nits (typical). It can be equipped with both resistive (RTP) and capacitive (PCAP) touch panels. 【Features】 ■ Compatible with resistive and capacitive touch panels ■ Power supply voltage range: 3.0V to 3.6V ■ Wide viewing angles: Left 80 / Right 80 / Up 80 / Down 80 degrees ■ Storage temperature & operating temperature -30℃ to 80℃ * For more details, please refer to the PDF document or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts
• LED Module

The MCP33131D-05 is a 16-bit SAR ADC that features differential input, high performance, and low power consumption in a small package. It is well-suited for battery-powered systems and remote data acquisition applications. Additionally, it is equipped with a successive approximation register (SAR) architecture and an industry-standard SPI interface, allowing you to add 16-bit ADC functionality to any microcontroller. 【Features】 ■ Sampling Rate: MCP33131D/21D/11D-05: 500 Ksps ■ Resolution: 16/14/12 bit (no missing codes) ■ Ultra-low quiescent current ・Standby mode (typ.): ~0.8 μA ・Conversion mode (typ.): ~1.4 mA *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

• Other electronic parts
• converter
• Other semiconductors

The "56F Series" is an RJ45 jack series that incorporates pulse transformers and common mode choke coils, supporting high-speed communication at 2.5/5/10G Base-T. It is compatible with PoE, which is being increasingly adopted in various terminal devices, and conforms to the IEEE802.3af/IEEE 802.3at/IEEE 802.3bt standards. Additionally, the products in this series are designed to adapt to a variety of Ethernet applications with a single, simple design. 【Features】 ■ PoE & PoE+ compatible ■ Supports 2.5/5/10G Base-T ■ Compatible with high-speed Ethernet for CAT5 & CAT6 ■ Status indication: with indicator LED ■ Space-saving design with built-in pulse transformer * For more details, please refer to the PDF materials or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts

The "AVR-DA Microcontroller Family" is a product equipped with new safety features such as "voltage level monitoring" and "CRC (Cyclic Redundancy Check) scan function" to ensure robust operation. Supported by safety manuals, FMEDA reports, etc., it contributes to reducing the time and cost associated with the certification of end application safety. For development, XC compilers and evaluation kits that are functionally safety certified are available. 【Features】 ■ Capable of high noise resistance design with an operating range of 1.8V to 5.5V ■ Up to 128KB of flash memory and 16KB of SRAM ■ A wide lineup ranging from 28 pins to 64 pins ■ Analog functions such as 12-bit differential ADC and 10-bit DAC are also suitable for sensor interface applications * For more details, please refer to the PDF materials or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts
• controller
• Other semiconductors

The IDC product line is an IDC wire cable assembly equipped with high-reliability Tiger Eye contacts with 1.27mm and 2.00mm pitch, as well as 2-point contact with 2.54mm pitch. Socket and plug terminations are selectable. There are low-profile and slim body designs, ejectors suitable for mating, shrouds, elevated headers, and locking clip and cap options suitable for more robust applications. 【Features】 - Low-profile and slim body design - A variety of mating options for robust mating - End options available in addition to both-end assemblies - Options for strain relief, daisy chains, etc. *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

• Other electronic parts
• Other cable related products

The "XGL series" is a metal composite inductor that achieves low iron loss during high-frequency operation and has a very low DCR, which helps suppress temperature rise on the substrate. Additionally, it offers a wide range of inductance values, and its metal composite structure provides excellent current capacity, high heat resistance, low noise, and mechanical robustness. Furthermore, it has also obtained AEC-Q200 Grade 1 certification. 【Features】 ■ Ultra-low loss ■ Ultra-low DCR (DCR 1.0mΩ and above) ■ Ultra-low iron loss (up to 10MHz) ■ Low temperature rise (Irms: 34.7A and above) ■ Wide range of inductance values (82nH to 47μH) *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• Inductor Coil

The "PIC16(L)F153xx family" is a low-power general-purpose 8-bit microcontroller equipped with core-independent peripherals (CIP) and communication modules, among others. To enhance the flexibility of the board layout, it features the Peripheral Pin Select (PPS) function, which allows for the reassignment of digital I/O pins. The hardware-implemented CIP contributes to reducing firmware development time and memory usage while supporting a wide range of applications. 【Features】 ■ Up to 28KB of flash memory and up to 2KB of SRAM ■ A wealth of features for achieving low power consumption, including power management modes (IDLE/DOZE) and peripheral module disable (PMD) functions ■ Protection against accidental writing of the bootloader through the Memory Access Partition (MAP) function *For more details, please refer to the PDF materials or feel free to contact us. *You can download the English version of the catalog.

• Other electronic parts
• controller
• Other semiconductors

The "SAM L11 Family" is a 32-bit microcontroller that offers security, low power consumption, capacitive touch technology, and advanced analog features. With a low power consumption of up to 100 nA (in sleep mode), it incorporates Arm TrustZone. Utilizing these features can significantly contribute to the development of applications such as IoT, security, low power, touch, automotive, and general embedded control. 【Features】 ■ 32 MHz Arm Cortex M23 core ■ Low power consumption of up to 100 nA (in sleep mode) ■ Built-in Arm TrustZone ■ Operating temperature range of -40°C to 125°C *For more details, please refer to the PDF materials or feel free to contact us. *You can download the English version of the catalog.

• Other electronic parts
• controller
• Other semiconductors

The "WF101JTYAHLNN0" is a 10.1-inch IPS TFT LCD module with a resolution of 1024x600 dots in landscape mode. This model is equipped with built-in EK79001HN and EK73215BCGA driver ICs and features an LVDS interface, with a contrast ratio of 800 (Typ.). The brightness is 500 nits (Typ.), and the aspect ratio is 16:9, with a high-brightness type also available. 【Features】 ■ 10.1-inch LCD module in landscape mode ■ The surface is anti-glare, typically black, and supports transmissive LCD ■ Interface is LVDS ■ Viewing angles are 85 degrees left/right/up/down (Typ.) * For more details, please refer to the PDF document or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts
• LED Module

The "WEX025664B-CTP" is a 3.12-inch COF structure graphic OLED display with a resolution of 256x64 dots and a capacitive touch panel. The interface supports 6800/8080 8-bit parallel and SPI, with a 3.0V (Typ.) logic power supply voltage and a 4-bit grayscale. The supply voltage for the display is 14.5V, and the duty cycle is 1/64. The touch panel IC supports I2C interface with one detection point. 【Features】 ■ 3.12-inch capacitive graphic OLED ■ Logic power supply voltage is 3.0V, and display voltage is 14.5V ■ Operating temperature -20℃ to 70℃, storage temperature -30℃ to 80℃ ■ Emission colors are white, yellow, cyan, and green *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

• Other electronic parts
• LED Module

The "MX01 Series" is a flexible decorative light that can be freely bent and shaped. It can operate on primary batteries with options for high-speed flashing, low-speed flashing, and constant lighting; on secondary batteries, it allows for low-speed flashing and constant lighting, while on smartphones, only constant lighting is available. With an IP68 rating, it can be washed as is when sewn into clothing, and the available light colors are white, red, blue, green, yellow, rose gold, turquoise (blue-green), and magenta (reddish-purple). 【Features】 ■ Dustproof and waterproof, allowing for washing ■ Illuminates in 360° all directions ■ Good light conductivity, evenly illuminating the entire tube ■ Can be sewn onto fabric *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

• Other electronic parts
• LED Module

This product is a contactless optical sensor that utilizes Neonode's patented unique technology, "zForce Technology," enabling non-contact screen and key input, adaptable to the new normal. Thanks to Neonode's years of experience in technology licensing and advanced optical technology R&D, we can provide sensor modules that incorporate optical reflection technology. It can be used for non-contact touch, non-contact switches, air coupling, gestures, explorer kits, and more. 【Features】 ■ Unique zForce Technology ■ Usable in harsh environments ■ Sensor incorporating optical reflection technology ■ Quick implementation possible *For more details, please refer to the PDF materials or feel free to contact us.

• Other optical parts
• Other electronic parts
• Sensors

The "PIC18-Q43 Family" is a product that achieves high-speed system response through smart interconnections with peripherals that are independent of the CPU core. Since flexible feedback loops can be configured in hardware, it significantly reduces the usage of RAM and flash memory compared to implementing the same functionality in software. With multiple DMA channels and interrupt functions, it is suitable for various real-time controls, including motors and IoT. 【Features】 ■ Each CIP can be easily configured in a GUI-based development environment ■ Multiple DMA channels and interrupt functions make it ideal for various real-time controls, including motors and IoT ■ Achieves high-speed system response through smart interconnections ■ Flexible feedback loops can be configured in hardware ■ Significantly reduces RAM and flash memory usage *For more details, please refer to the PDF materials or feel free to contact us. *You can download the English version of the catalog.

• Other electronic parts
• Other semiconductors

The product is a high-frequency device for UWB CH9, expected to be applied in distance measurement and positioning, automotive distance measurement and positioning, sensors, aircraft, and more. It is suitable for miniaturization and performance improvement of UWB band wireless modules, and we offer products that have undergone reliability testing (AEC) for both general-purpose and automotive applications. We provide a dielectric chip antenna "7000AT18A1600E/7000AT18A1600E-AEC" and a dielectric laminated ceramic chip bandpass filter "7000BP15A1600E/7000BP15A1600E-AEC." 【Specifications】 〈Dielectric Chip Antenna〉 ■ Supported Frequency: 6.2GHz to 8.24GHz ■ Average Radiation Efficiency: 92% ■ Peak Gain: 2.0dBi (Typ.) ■ Average Gain: -0.5dBi (Typ.) ■ Return Loss: 9.5dB *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

• Other electronic parts
• antenna

The "0402DC Series" is a winding-type inductor that features an extremely small size of 1005, high precision, high Q, and low loss RF inductor. It offers 112 values ranging from 0.8nH to 120nH, with particular availability in increments of 0.1nH between 2.8nH and 10nH. It is suitable for constant evaluation in high-frequency front-end applications. 【Features】 ■ Extremely small size of 1005, high precision, high Q, low loss ■ A total of 112 finely-tuned values between 0.8nH and 120nH ■ Especially available in increments of 0.1nH between 2.8nH and 10nH ■ Ideal for constant adjustment in front-end applications ■ Very high self-resonant frequency ■ Sample book (kit) available for constant evaluation (Product model number: C472-2) *For more details, please refer to the PDF document or feel free to contact us. *An English version of the catalog is available for download.

• Other electronic parts
• Inductor Coil

We would like to introduce the current detection transformers from Coilcraft, the 'CST2020 Series.' These transformers are suitable for high-capacity power equipment, featuring low loss and a maximum detection current of 40A, with an inter-layer insulation voltage of 4000V, certified to UL60950-1. We offer four models: the "CST2020-070L" with a turns ratio of 1:70, the "CST2020-100L" with a ratio of 1:100, the "CST2020-200L" with a ratio of 1:200, and the "CST2020-300L" with a ratio of 1:300. 【Features】 ■ Extremely low DCR for low loss: The DCR of the detection winding is 0.84mΩ, indicating low resistance. ■ High inter-layer insulation voltage: The inter-layer insulation voltage between the primary and secondary windings is 4,000V (for 1 minute), providing high insulation. ■ Compact with high current capacity: Maximum detection current: 40A. ■ High operating temperature: Operating ambient temperature range of -40℃ to 125℃. ■ ROHS compliant. ■ Small footprint: 2cm x 2cm x 2cm. *For more details, please refer to the PDF document or feel free to contact us. *An English version of the catalog is available for download.

• Other electronic parts
• transformer

All heat sink products handled by our company are manufactured at our own factory in China, which has obtained ISO9001/ISO14001 certification. To improve quality, expand production capacity, and ensure stable supply, we established a local subsidiary, Songrong Metal Manufacturing Co., Ltd., in Dalian, China, in 2015 and began operations at our factory. We can propose suitable specifications through simple calculations and the use of simulation software, and we handle a variety of products including standard heat sinks for circuit board mounting, general-purpose heat sinks, and fin-pressed heat sinks. 【Features】 ■ The standard "PB series" can be soldered to circuit boards. ■ The general-purpose type can accommodate a wide range of requests. ■ The "KF series" is available specifically for forced air cooling. ■ Suitable specifications can be proposed through simple calculations and the use of simulation software. *For more details, please refer to the related link page or feel free to contact us.

• Other machine elements
• Other electronic parts

We would like to introduce the '2033 Series' gas arresters from Bones, designed for 48Vdc power line protection, featuring a diverse lineup of gas arresters. With high current ratings and low capacitance, there is no need for external varistors, and reset is possible after protection operation. The product's disc portion is compatible with T&R packaging, allowing for implementation via pick & place. 【Features】 ■ Low capacitance ■ High insulation resistance (>10GΩ) ■ UL certified (File: E313168) ■ RoHS compliant * For more details, please refer to the PDF materials or feel free to contact us. * An English version of the catalog is available for download.

• converter
• Other electronic parts

The "FemtoDLynxII FKX006A0X3-SRZ" is a non-isolated DC-DC converter that supports an input voltage of 4.5 to 14/4V and an output voltage of 0.6 to 5.5V, providing an output current of 6A. The tunable loop function improves load transient response characteristics and optimizes and reduces external capacitor capacity. The simulation tool Power Module Wizard (operated online) contributes to rapid circuit design. A pin-compatible 3A version is also available, and the compact package (6.76×9mm) is suitable for high-density mounting. 【Features】 ■ Simulation tool (operated online) available ■ Tunable loop function (ABB patent) ■ Output overcurrent protection ■ Overheat protection ■ Remote On/Off function * For more details, please refer to the PDF document or feel free to contact us. * An English version of the catalog is available for download.

• converter
• power supply