グローバル電子 List of Products and Services

The WEO160128A is a COG graphic OLED display module with a diagonal size of 1.92 inches and a resolution of 160x128. This module incorporates the SH1108 IC and supports 6800/8080 parallel, I2C, and 4-wire SPI serial interfaces. With a 50% display area usage, it consumes 23mA at 12Vcc (Typ.). The driving duty is 1/128. 【Features】 ■ High contrast, fast response speed, low power consumption ■ Display colors: white and yellow ■ Supply voltage - Logic: 3V / Display: 12V ■ Interfaces: 6800, 8080, I2C, SPI ■ Storage temperature: -40℃ to 85℃, Operating temperature: -40℃ to 80℃ *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts

The "TA36 Series" is a circuit breaker that maintains the wide electrical specifications of the conventional TA35 Series (rated 0.05 to 20.00A) while incorporating a compact design and vibrant modern aesthetics. It has been upgraded from the TA35 to allow for a clearer tactile feedback when switching. 【Features】 ■ High circuit protection performance combined with modern design ■ Suitable for new applications that require attractive design ■ Number of poles: 1 to 2 poles ■ Switch type: ON/OFF switch or momentary ■ Mounting method: Snap-in *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts

The MCP1012 is a primary-side startup IC used to start offline auxiliary switching power supplies that operate in conjunction with a secondary-side controller. It is designed for isolated converters. The control signal from the secondary side is not linear. The secondary-side controller (digital and/or analog) regulates linearly using advanced adaptive control schemes to improve performance and efficiency. 【Features】 ■ High voltage startup (rated 500V/700V) ■ Internal open-loop peak current mode (PCM) current regulator for startup ■ Receives external PWM commands from the secondary-side controller via an isolator (opto-coupler or pulse transformer) ■ Robust gate driver capable of driving a 2.2nF load at 65kHz *For more details, please refer to the related link page or feel free to contact us.

• Dedicated IC
• converter
• Other electronic parts

The "Round OLED WEO128128D-CTP Model with Knob" is an expanded item equipped with a capacitive touch screen and a control knob for the module. This module incorporates the SSD1327 IC, with a typical logic supply voltage of 3V. It features the IT7259 touch panel IC, which detects points with a single finger and supports the I2C interface. 【Features】 ■ Built-in encoder allows operation beyond the touch panel ■ Display colors include white, yellow, and light blue ■ Supply voltage is 3V (typ.) with a duty cycle of 1/128 ■ Supports 4-wire SPI and I2C interfaces ■ Storage temperature: -30 to 70℃, Operating temperature: -20 to 50℃ *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts

Our company receives many requests not only for drilling holes for component installation but also for manufacturing through total machining from aluminum blocks. Traditionally, for medium to large products, due to the availability of materials, we may have to choose A5052 or A6061 materials, which are less advantageous in thermal conductivity compared to extruded materials (A6063). However, in our case, we can perform total machining using A6063 material even for relatively large sizes. Additionally, we can provide thermal design and proposals tailored to customer needs, from simple calculations to the use of thermal performance simulations. 【Characteristics of Machining】 ■ We receive many requests for manufacturing through total machining from aluminum blocks. ■ Total machining using A6063 material is possible even for relatively large sizes. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other contract services

We provide heat sinks for various applications such as power supplies and power conditioners. The general-purpose "KF" type can also be offered with nut spacers and push pins for mounting on the circuit board. Additionally, we can attach thermal spacers and thermal conductive double-sided tape. We can accommodate forced air cooling with fans, and we accept custom manufacturing from molds according to customer requests for image processing boards and switching power supplies. 【Features】 ■ The "KF series" can meet a variety of requests. ■ The "VF series" can be soldered to the circuit board. ■ Can be provided with pressed-in nut spacers and attached thermal spacers. ■ By utilizing simulation software, we can propose specifications that meet your needs. *For more details, please contact us.

• others

The "RRC2037" from RRC power solutions is a lithium-ion battery that combines high energy density from a cylindrical 18650 cell in a 2-series 1-parallel configuration with high safety standards compliant with safety certification regulations worldwide. By utilizing SMBus communication functionality, it enables more efficient management by reading battery status, including operating time, temperature information, and electrical specifications. Due to the manufacturer's policy of not conducting EOL (End of Life), you can use it with confidence. 【Features】 ■7.20V / 2.90Ah / 20.90Wh ■Size: 85.39×41.99×22.40mm ■Compliant with worldwide safety certification standards such as IEC62133, PSE, UL, etc. ■Efficient management through SMBus communication functionality ■Dedicated charger for RRC smart batteries (sold separately) *You can download the English version of the catalog. *For more details, please refer to the PDF document or feel free to contact us.

• Lithium-ion battery

The "AccliMate Series" features robust connectors and cables with IP67/IP68 dust and water resistance, suitable for applications requiring high reliability. It offers a variety of interfaces, including bayonet circular connectors in shell sizes of 12mm, 16mm, or 22mm, compact push-pull latching cable assemblies, Ethernet, and USB assemblies. This series provides a cost-effective solution. 【Features】 ■ Solutions with dust and water resistance ■ Connectors available for panel mount and PCB mounting ■ Coupling options such as push-pull, bayonet, and latching ■ Cost-effective solutions * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• cable

The "PIC18-Q84" is a microcontroller family equipped with various CIPs that can handle various tasks without the need for CPU intervention. Using this product can save time and costs for connecting to CAN FD networks, and it also allows for a shorter development period. The operating frequency is 64MHz, making it suitable for "in-vehicle networks" and "FA equipment." 【Features】 ■ Operating frequency: 64MHz ■ Power supply voltage range: 1.8–5.5V ■ Operating temperature range: -40℃ to +125℃ ■ 12-bit ADC with computing function, 8-bit DAC, 16-bit PWM ■ UART supporting DMX, DALI, and LIN communication ■ JTAG interface with memory scan function and 32-bit CRC *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The MCP16312 is a high-efficiency synchronous switch built-in buck regulator. It incorporates high-side and low-side switches, fixed frequency peak current mode control, internal compensation, peak current limit, and over-temperature protection circuits. It provides various active functions for local DC/DC conversion with fast transient response and accurate regulation. 【Features】 ■ Input voltage range: 4.4 to 30V ■ Output voltage range: 2.0 to 24V ■ Output current: 1A ■ Fixed frequency: 500kHz ■ Maximum efficiency of 95% ■ Built-in internal compensation, peak current limit, and over-temperature protection circuits *For more details, please refer to the related link page or feel free to contact us.

• converter

The "DSC612/DSC613" is a MEMS low-power, ultra-compact footprint, crystal-less multi-output clock generator. It implements Microchip's proven PureSilicon MEMS technology to provide low jitter and high stability across a wide range of supply voltages and temperatures. Customers can configure specifications according to their needs, including output frequency, control pin functions, package size, PPM accuracy, and temperature range. 【Features】 ■ Wide frequency range: 2KHz to 100KHz ■ High frequency stability: ±20ppm, ±25ppm, ±50ppm ■ Supply voltage range: 1.71 to 3.6V ■ Low power consumption: 5mA (active), 1μA standby * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The 'X2Y EMI Filter' from Johnson Dials Electronics exhibits excellent noise removal characteristics against various types of noise. It is effective not only against common mode noise but also against power line ripple noise and mode conversion noise. In particular, for common mode noise, it connects across differential transmission line pairs (shunt), allowing for the removal of noise components without degrading the main signal. 【Features】 ■ Compact ■ Countermeasures for common mode noise, power line ripple noise, and mode conversion noise ■ Low ESL / low cost ■ Automotive compatible ■ Non-magnetic * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• filter

HARVATEK is a specialized manufacturer of LEDs, primarily focusing on SMD LEDs. Thanks to automated equipment, we can offer affordable and high-quality products produced in Taiwan. We are particularly focusing on "UV LEDs," which are currently in high demand, in addition to visible light. Among them, "UVC" is effective in sterilizing many spores and has been confirmed to inactivate certain viruses. 【Features】 ■ Output: Ranges from 4.5mW to 200mW ■ Effective against various bacteria ■ In addition to standalone LEDs, we can also accommodate custom development as a device *For more details, please refer to the related link page or feel free to contact us.

• LED Module
• Chip type LED

The MIC23050 is a high-efficiency, 600mA PWM synchronous buck regulator. With HyperLight Load, it provides best-in-class light load efficiency and transient performance, achieving very small external components and low output ripple across all loads. The quiescent current is very low at 20µA (typ.), allowing it to operate with small inductors, and it comes in a compact package measuring 2mm x 2mm with a height of less than 1mm, contributing to a reduction in board area. 【Features】 ■ Input voltage range: 2.7 to 5.5V ■ Fixed output voltages: 1.0V, 1.2V, 1.8V, 3.3V ■ Output current: 600mA ■ Fixed frequency: 4MHz ■ Quiescent current: 20µA ■ Small package: 2mm x 2mm *You can download the English version of the catalog. *For more details, please refer to the PDF document or feel free to contact us.

• converter

The "WEA128128A" features a mounted circuit board with a diagonal size of 1.5 inches and a resolution of 128x128. It has mounting holes for easy installation into your equipment. This OLED display incorporates the "SSD1327," supports 16 (4-bit) grayscale inversion, and has a drive duty of 1/128. With a display area usage of 50%, it consumes 160mA at 3.3VDD (Typ.). 【Features】 ■ High contrast, fast response speed, low power consumption ■ Display colors: white, yellow, light blue ■ Logic power supply voltage: 3.3 to 5V ■ Supports SPI interface, I2C is also available ■ Storage temperature: -40 to 85℃ ■ Operating temperature: -40 to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Organic EL

The "ABP2 Series" is a highly versatile, board-mounted miniature pressure sensor. For liquid media options, it features a silicone-based gel coating that protects the electronic components beneath the port. Therefore, it can be used in applications where non-corrosive liquids or condensation may occur. 【Features】 ■ Total error ±1.5% FSS or less ■ Liquid compatible ■ Digital output via SPI/I2C ■ Food grade compliant * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Sensors

The "MGS004-F" is an easy-to-install, maintenance-free CO2/VOC monitor. With wireless LAN connectivity, it can display CO2 and VOC concentrations on a PC or large display, and it can also be wired to existing ventilation systems for automatic ON/OFF control. By monitoring and visualizing indoor air quality (IAQ), it not only enables appropriate ventilation but also helps promote a safe and secure air environment in public facilities. 【Other Features】 ■ Easily installable on walls using only an AC adapter ■ Equipped with an automatic calibration NDIR CO2 sensor ■ Can connect to any display via wireless LAN *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Other safety and hygiene products

By covering a product that incorporates LAN transformer coils and common mode choke coils within a conventional resin housing with a stainless steel shield, we have improved resistance to external noise and ensured stable communication. The production is consistently carried out at the Bones company's factory in Xiamen, Fujian Province, with all processes automated, enhancing product reliability.

• transformer

The WEO004864A is a small PM OLED with a resolution of 48x64 dots. The product size is only 13.90×22.0mm. The power supply voltage is 3V, and its self-emitting COG structure allows for a thin, lightweight design and low power consumption. Furthermore, it was awarded the 2021 Taiwan Excellence Award. This award is given to products that possess "innovative value" based on four evaluation criteria: research and development, design, quality, and marketing. 【Features】 ■ High contrast, fast response speed, small and lightweight ■ Display colors are white, yellow, and sky blue ■ Supply voltage is 3V with a duty cycle of 1/64 ■ Supports I2C interface ■ Storage temperature -40℃ to 85℃, operating temperature -40℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Organic EL

The "dsPIC33CK64MC Family" is a low-cost product designed for Field Oriented Control (FOC) with a digital signal processing (DSP) engine operating at 100 MIPS and compliant with functional safety. It contributes to reducing system costs as it includes high-speed ADCs, comparators, high-resolution PWM, and even operational amplifiers. The software development suite motorBench for FOC control using a GUI supports accurate measurement of each motor parameter and automatic generation of optimized source code, which can also reduce man-hours. 【Features】 ■ Supports a power supply voltage range of 3.0 to 3.6V and a temperature range up to 150℃ ■ 12-bit 3.5 Msps A/D converter, 12-bit D/A converter ■ 2.5 ns resolution PWM ■ Three built-in operational amplifiers reduce BOM costs * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other semiconductors

The "1205PoC/1210PoC series" is suitable for filters in the Power over Coax (PoC) line. It maintains a high impedance (≥1kOhm) across a wide frequency range, contributing to the separation of DC power and AC signals in the PoC line. Additionally, its compact design allows for a reduction in mounting area. Reliability is certified to AEC-Q200 Grade 1 (-40°C to +125°C), and it meets environmental standards for halogen-free RoHS compliance. 【Features】 ■ Inductor for PoC filters ■ Supports a wide frequency range (1–3MHz) ■ High impedance (≥1kOhm) ■ Low mounting area (mounting area of 1205PoC: 3.87mm²) ■ AEC-Q200 Grade 1 (-40°C to +125°C) certified * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The "MF-MSHT series" is a high-temperature compatible product from Bourns, featuring a wide lineup of resettable fuse products using polymer PTC, with an upper temperature limit of 125°C. It covers a holding current range of 200mA to 1.75A in eight steps. The absolute voltage rating is set between 9 to 42V, meeting high-temperature and high-voltage requirements. In addition to this high-temperature compatible product, sizes 3216, 2012, and 1608 are also available. 【Features】 ■ UL and IEC standard certified (some IEC Pending) ■ 4532 size ■ Operating temperature range: -40 to +125°C ■ RoHS compliant * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Peltier element
• Other electronic parts

The RN4870/4871 features an integrated Bluetooth software stack and offers a shielded regulatory certified version with a built-in antenna. Developers are freed from the complexities of Bluetooth software and RF development, making it easily accessible as a wired alternative. It is well-suited for IoT applications, allowing monitoring, control, and updates of applications from anywhere in the world when connected to a BLE-enabled smartphone or Bluetooth Internet Gateway. 【Features】 ■ Bluetooth Specification: 5.0 ■ Power Supply Voltage Range: 1.9 to 3.6V ■ Operating Temperature Range: -40℃ to +85℃ ■ Command Format: ASCII ■ Size: 12x22mm RN4870, 9x11mm RN4871 *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

• Other electronic parts
• Other semiconductors

We offer a wide range of SCHURTER's 'Power Entry Modules' that integrate switches, circuit breakers (CBE), fuses, line filters, etc., into a single module compliant with the IEC60320-1 standard. We provide a variety of specifications and options for each component, allowing us to offer the ideal power entry module for application requirements. This significantly contributes to product miniaturization and reduction of manufacturing processes. ■ Contributes to compact, space-saving design ■ Reduces installation labor for product panels ■ Filter leakage current values (standard: 0.5mA, medical M5: 5μA, medical M80: 80μA) ■ Complies with IEC60320-1 standards C14, C18, C20 ■ Usable in IEC/UL 60950 and IEC/UL 60601-1 equipment ■ Certification standards: ENEC, UL, CSA, CCC *You can view the product lineup in the English version of the document available for "PDF download." Please feel free to contact us for more details.

• Other power sources
• Switching Power Supply

The "COZIR-Blink" is a CO2 sensor with configurable measurement cycles and automatic calibration periods. Due to its very short startup time, it is possible to turn off the power immediately after the sensor has taken a measurement. As a result, the power consumption becomes zero outside of the user-defined measurement cycle, making it suitable for applications that require lower power consumption. 【Features】 ■ High-precision NDIR CO2 sensor ■ Digital output via UART and I2C ■ Time required for the first measurement < 3.5 seconds ■ Long lifespan of over 15 years * For more details, please refer to the PDF document or feel free to contact us. * An English version of the catalog is available for download.

• Sensors
• Sensors
• Ventilation and Exhaust

The "WEO009632B-ZIF" is a 0.68-inch, 96x32 dot, mini OLED display. It has a built-in SSD1305 driver IC and supports 6800/8080 8-bit parallel, I2C, and 4-wire SPI interfaces, with a supply voltage of 3V and a duty cycle of 1/32. With 50% of the display area used, the current consumption is 3.6mA @ 12Vcc (typical). It is a COG PMOLED module, and due to the lack of a backlight, it is extremely thin at 1.21mm. 【Features】 ■ High contrast, fast response speed, compact, lightweight ■ Display colors are white and yellow (2 colors) ■ Supply voltage is 3V, and the duty cycle is 1/32 ■ Compatible with 6800, 8080, SPI, and I2C interfaces ■ Storage temperature -40℃ to 85℃, operating temperature -40℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• LCD display
• Organic EL

"SeaSafe II & SeaSafe Direct" is a pressure-resistant lithium polymer battery pack jointly designed and developed by SWE Corporation and the Woods Hole Oceanographic Institution. It features pressure resistance and sealing capabilities that allow it to operate at depths of 6,000 meters in the deep sea, while achieving approximately 1/4 the weight of conventional lead-acid batteries (compared with the same specifications) and about 6 times the product lifespan. Additionally, "SeaSafe Direct" can be charged and discharged directly underwater without the need for a pressure-balanced oil-filled (PBOF) container. [Features] - Internal cells available in 7 series (24V) type and 8 series (30V) type - Capable of accommodating a wide range of specifications through series and parallel connections - Dimensions: 37.6 × 39.6 × 45.2 cm - Pressure resistance and sealing capability: Operates at depths of 6,000 meters - Compliant with IEC62619 *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• Secondary Cells/Batteries

This product is a high-speed cable assembly with fine wire coaxial cables and Twinax cables suitable for differential pairs, single-ended applications, etc. It features solutions such as Edge Rate, which incorporates a built-in ground plane and achieves robust mating with male and female identical shapes, as well as high-speed PCI Express. Additionally, various flexible option settings can be selected. 【Features】 ■ Various end options (mating direction, male/female, etc.) are selectable ■ A wide range of mating options that achieve robust mating ■ A product lineup that supports I/O such as SFP+ and QSFP ■ The NovaRay series, which offers ultra-high density with a performance of up to 112Gbps (PAM4) ■ Products that have a proven track record of signal integrity capable of withstanding scale expansion for 5G network equipment and more * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• cable
• Other electronic parts

The ABB AC-DC power supply "GP (Global Platform) Series" is suitable for devices that require high power, high efficiency, and high-density packaging. It features high efficiency at the 80PLUS TITANIUM level and is equipped with parallel operation capabilities (redundant operation). Additionally, it allows for control and monitoring through PMBus communication, and evaluation tools such as dedicated shelves, cables, and GUIs are also available. 【Features】 ■ High efficiency at the 80PLUS TITANIUM level ■ High power density 445×202×41mm 30W/in3 ■ Can accommodate two units in a 1U, 19-inch wide rack ■ Parallel operation capabilities (redundant operation) ■ Hot-swappable * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• power supply
• power supply

This BMS transformer can be used with an operating voltage of 1000 Vdc and a 3000 Vac Hi-Pot insulation function for 60 seconds, within a temperature range of -40 to +150°C. It supports serial daisy chain/IsoSPI communication and complies with AEC-Q200. A common mode choke is used internally for noise filtering.

• transformer

The MF-MSHT series expands the operating temperature range to -40°C to +125°C and consists of eight types with rated voltages from 9V to 42V and hold current values from 0.20A to 1.75A. In addition to existing resettable fuses, this is a proposal for a wider range of standard high-temperature PPTC products. This new MF-MSHT series utilizes the innovative patented technology freeXpansion design to enhance the functionality of resettable fuses as follows: • Higher hold current rating (Ihold) • Improved resistance stability • Higher maximum voltage rating (Vmax) • Smaller footprint

• fuse

The PAC18R absolute encoder is designed for use in professional audio and lighting applications, low to medium risk medical and diagnostic equipment*, industrial automation control devices, and more. It is equipped with a shaft seal that achieves a higher IP (Ingress Protection) level and a luxurious rotational feel. (Note*: Medical devices that do not involve human life, medical class II and below)

• encoder

Bourns' newly improved next-generation surface mount type 2-electrode GDT surge protection device is designed using the company's proprietary advanced computer simulation technology and is a product that meets the industry's leading maximum impulse voltage in an environmentally friendly compact surface mount package. By using this product, protection against induced voltage transients such as lightning and AC induction can be significantly enhanced, and even with steep voltage rises, this enhanced level of protection can reduce the stress on downstream components compared to existing gas discharge products for the same application.

• Other electronic parts

The SM8SF-Q is ideal for those seeking a smaller size of 8.1X10.5X1.3mm and a lower profile compared to the competing product DO-218 size (10.5X16X5mm). It can be replaced using the same recommended pad layout as the competing product, allowing for a drop-in replacement without the need for PCB modifications. We also offer the same DO-218 type, so please consider it.

• Other electronic parts

The well-known company Bones, famous for variable resistors, also offers fixed resistors, including chip types and array (network) types. The array types are available in electrode types: convex (CAY series) and concave (CAT series), with options for the number of elements, internal resistance arrangement, jumpers, and products with sulfur resistance measures.

• Resistors

In addition to Bourns' disc-type metal oxide varistors, surface mount products are included in the lineup. The former KEKO company, a European manufacturer, has been brought under our umbrella, and its product lineup has been absorbed. With a strong track record in automotive applications, the high reliability of the products is well-established.

• Other electronic parts

● The effectiveness is guaranteed based on actual adoption examples for protection proposals. ● A combined proposal for signal line protection and power line protection. ● Higher cost performance compared to the use of overcurrent protection ICs.

• Other electronic parts

Introducing chip resistors with high power ratings from Bones Corporation, now available in automotive grade with sulfur-resistant options (CHP-A). Additionally, we present products with enhanced surge resistance characteristics (CMP-A).

• Resistors

The "15F Series" is a pulse transformer (LAN filter) that supports high-speed communication of 2.5G/5G/10G Base-T. Power over Ethernet (PoE), a power supply method using Ethernet, is being increasingly adopted in various terminal devices. It complies with the standards IEEE802.3af/IEEE 802.3at/IEEE 802.3bt (2.5G series). This solution is particularly suitable for industrial networking and IP communication, which are advancing in speed. 【Features】 ■ Supports PoE & PoE+ ■ Compact design ■ RoHS compliant ■ UL60950-1 safety certification passed * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Transformers

The "WF52ATLASDNN0" is a 5.2-inch bar-type TFT color LCD. The "WF52A" is a new size and resolution product with an effective display area of 133.4x39.4mm and an active area of 127.152x33.9072mm. This product has a built-in ST7252 or equivalent driver IC and supports an RGB 24-bit parallel interface in SYNC mode. If a PCB with screw holes is required, you can choose the WF52ATLBSDBN0. The related videos below showcase various images and color reproduction. Please take a look. 【Features】 ■ 5.2-inch bar type ■ Built-in ST7252 driver IC ■ Supports 24-bit RGB interface ■ Resolution: 480×128 pixels ■ Normally white, transmissive LCD with an anti-glare surface * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• LCD display

The ATtiny1607 family is a microcontroller equipped with hardware-based peripheral modules (CIP) independent of the core and features low power consumption, making it suitable for efficient real-time control and sensor node applications. With a lineup ranging from 8 to 24 pins, it can accommodate a wide range of applications including industrial equipment, consumer products, home appliances, and automotive. Development can be initiated immediately with a wealth of application notes and user-friendly evaluation boards. The related video below introduces the features of this family, various built-in peripherals, and the development environment. It is just under 4 minutes long, so please take a look. 【Features】 ■ Built-in flash memory of up to 16KB, 1024 bytes of SRAM, and 256 bytes of EEPROM ■ Operating frequency of 20MHz ■ Operates within a supply voltage range of 1.8 to 5.5V and a temperature range of -40℃ to 125℃ ■ Three low power modes that balance power consumption and processing speed ■ Built-in ADC capable of integrating up to 64 samples * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other semiconductors
• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment

The MCP3914 features eight synchronized sampling ΔΣ ADCs, eight PGAs, a phase delay compensation block, a low-drift internal reference voltage, digital offset and gain error configuration registers, and a 20MHz SPI-compatible high-speed serial interface. It enables high-precision current measurement and power monitoring in end products, and can interface with various voltage and current sensors such as current transformers, Rogowski coils, and Hall effect sensors. The related video below explains the new features of this product, as well as its basic specifications and characteristics. It also introduces the "MCP3913," which is part of the same family. Please take a look. 【Features】 ■ Configurable data rate up to 125ksps ■ Built-in 24-Bit ΔΣ ADC 　・94.5dB SINAD / 106.5dBc THD / 112dBFS SFDR ■ AEC-Q100 Grade 1 certified ■ Usable for multi-phase energy measurement and power monitoring * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other semiconductors
• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment

The MCP1501 is a buffered reference voltage generator capable of sinking/sourcing 20mA of current. The reference voltage is generated by a low-drift bandgap circuit, and the chopper amplifier reduces drift while outputting high current without degrading performance. The package is available in 6-pin SOT-23, 8-pin SOIC, and 8-pin 2mm x 2mm WDFN packages. The related video below introduces Microchip's solutions for BMS (Battery Management Systems), including a presentation of the "MCP1501." Please take a look. 【Features】 ■ Temperature error: 50 ppm/°C or less (-40 to +125°C) ■ Low supply current: 140 μA (typ.) ■ AEC-Q100 Grade 1 certified ■ Products available for 8 different voltage options: - 1.024V, 1.250V, 1.800V, 2.048V, 2.500V, 3.000V, 3.300V, 4.096V * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other semiconductors
• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment

The "SM43P01EL" consists of four discrete chip LAN transformers and four common mode chokes, which are mounted on a circuit board and coated with a ferromagnetic metal shield. It can be used in a pin-compatible manner with conventional case-type LAN transformers, and compared to conventional products, it has a lower profile and superior terminal flatness. By combining common mode chokes, it suppresses EMI through high attenuation. 【Features】 ■ Complies with IEEE802.3 Ethernet standards ■ Hi-pot: 1,500Vac, 1min ■ Operating temperature range: 0~+85℃ ■ RoHS compliant * An English version of the catalog is available for download. * For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Transformers

We handle the BOURNS port protection evaluation board 'RS-485'. We propose protection against three anticipated threats: lightning surges (induced lightning) due to outdoor installation/wiring, AC contact from AC power lines to signal lines, and the risk of miswiring or connection issues with connected devices during installation. Please feel free to contact us when you need assistance. 【Features】 ■ Protection proposals backed by proven results ■ Perfect compatibility between components as all products are in-house ■ All products comply with RoHS ■ Choose between gas arresters and thyristors * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Evaluation Board