グローバル電子 Product Lineup

This product is a contactless optical sensor that utilizes Neonode's patented unique technology, "zForce Technology," enabling non-contact screen and key input, adaptable to the new normal. Thanks to Neonode's years of experience in technology licensing and advanced optical technology R&D, we can provide sensor modules that incorporate optical reflection technology. It can be used for non-contact touch, non-contact switches, air coupling, gestures, explorer kits, and more. 【Features】 ■ Unique zForce Technology ■ Usable in harsh environments ■ Sensor incorporating optical reflection technology ■ Quick implementation possible *For more details, please refer to the PDF materials or feel free to contact us.

The "56F Series" is an RJ45 jack series that incorporates pulse transformers and common mode choke coils, supporting high-speed communication at 2.5/5/10G Base-T. It is compatible with PoE, which is being increasingly adopted in various terminal devices, and conforms to the IEEE802.3af/IEEE 802.3at/IEEE 802.3bt standards. Additionally, the products in this series are designed to adapt to a variety of Ethernet applications with a single, simple design. 【Features】 ■ PoE & PoE+ compatible ■ Supports 2.5/5/10G Base-T ■ Compatible with high-speed Ethernet for CAT5 & CAT6 ■ Status indication: with indicator LED ■ Space-saving design with built-in pulse transformer * For more details, please refer to the PDF materials or feel free to contact us. * An English version of the catalog is available for download.

The "WF50F" is a 5-inch landscape-type IPS TFT LCD with a resolution of 800x480. It has a built-in ST7262 driver IC and supports a 24-bit RGB interface. The contrast ratio is 1000 (typical). The "WF50FSWAGDNN0" is a high-brightness type with a brightness of 1000 nits (typical). It can be equipped with both resistive (RTP) and capacitive (PCAP) touch panels. 【Features】 ■ Compatible with resistive and capacitive touch panels ■ Power supply voltage range: 3.0V to 3.6V ■ Wide viewing angles: Left 80 / Right 80 / Up 80 / Down 80 degrees ■ Storage temperature & operating temperature -30℃ to 80℃ * For more details, please refer to the PDF document or feel free to contact us. * An English version of the catalog is available for download.

The WEG010016J is a 3.84-inch, COB type, 100×16 dot monochrome graphic PM OLED. This module incorporates the WS0010 control IC and supports 6800 (default), 8080, and SPI interfaces. Compared to general monochrome LCDs, OLEDs offer high contrast, with a darker background color, and the display effect is beautiful and clear. 【Features】 ■ High contrast, fast response speed, wide viewing angle ■ Display colors are white, yellow, blue, and green ■ Supply voltage is 5V, with a duty cycle of 1/16 ■ Supports 6800, 8080, and SPI interfaces ■ Storage temperature -40℃ to 85℃, operating temperature -40℃ to 70℃ * For more details, please refer to the PDF documentation or feel free to contact us. * An English version of the catalog is available for download.

This product uses a SAMTEC SEARAY 400-pin connector for the expansion connection of the output interface of the NVIDIA Jetson TX1/TX2 module. The SEARAY series from Samtec is a high-speed, high-density open pin field array product. It is suitable for applications such as drones and image processing-related products. 【Features】 ■ Connector mounted on NVIDIA module board ■ Narrow pitch multi-pin high-speed connector ■ Samtec connectors are also used in other modules * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The RN4870/4871 features an integrated Bluetooth software stack and offers a shielded regulatory certified version with a built-in antenna. Developers are freed from the complexities of Bluetooth software and RF development, making it easily accessible as a wired alternative. It is well-suited for IoT applications, allowing monitoring, control, and updates of applications from anywhere in the world when connected to a BLE-enabled smartphone or Bluetooth Internet Gateway. 【Features】 ■ Bluetooth Specification: 5.0 ■ Power Supply Voltage Range: 1.9 to 3.6V ■ Operating Temperature Range: -40℃ to +85℃ ■ Command Format: ASCII ■ Size: 12x22mm RN4870, 9x11mm RN4871 *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

The WEO160128A is a COG graphic OLED display module with a diagonal size of 1.92 inches and a resolution of 160x128. This module incorporates the SH1108 IC and supports 6800/8080 parallel, I2C, and 4-wire SPI serial interfaces. With a 50% display area usage, it consumes 23mA at 12Vcc (Typ.). The driving duty is 1/128. 【Features】 ■ High contrast, fast response speed, low power consumption ■ Display colors: white and yellow ■ Supply voltage - Logic: 3V / Display: 12V ■ Interfaces: 6800, 8080, I2C, SPI ■ Storage temperature: -40℃ to 85℃, Operating temperature: -40℃ to 80℃ *For more details, please refer to the related link page or feel free to contact us.

The "Ag105" is a module for charging control from solar panel generation to secondary batteries such as lithium-ion (Li-Ion) batteries and lithium polymer (Li-Po) batteries. It can use a fixed DC power supply as the input power source, and since the control circuit adopts a modular design, it does not require auxiliary (external) components, allowing for a simple and low-cost configuration of secondary battery backup systems tailored to various applications. The design takes into consideration the important aspect of battery longevity and is optimized to enhance the power generation of solar panels using intelligent charging technology. 【Features】 ■ Multifunctional battery charging controller (JEITA compliant) ■ Charging from solar panels or fixed DC power supply ■ Charging profile selection (I2C interface) ■ MPPT (Programmable Maximum Power Point Tracking) specification ■ Wide input voltage (11V to 36V) *For more details, please refer to the related link page or feel free to contact us.

The "WF70A8SYAHMNN0" is a display module that incorporates the EK7900AD3 and EK7321BCG driver ICs. It supports a 4-lane MIPI DSI interface. The MIPI DSI interface is gaining popularity due to its characteristics of high-speed data transmission and high-speed clock transmission. Additionally, while the brightness is 1100 nits (Typ.), a product with 600 nits is also available for cases where high brightness is not required. 【Features】 ■ Module size: 169.9×103.4×5.6mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Resolution: 1024×RGB×600 (TFT) pixels ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "zForce AIR Touch Sensor" is a touch sensor module that utilizes infrared for sensing. It enables a non-contact solution that does not require direct contact with displays or switches. The evaluation kit also includes an interface board that can be connected to a host device via USB or I2C. Additionally, the software "Workbench," which can be downloaded for free from Neonode's website, is a very convenient tool for various sensor settings. 【Features】 ■ A lineup of sensors ranging from 115mm to 346mm for different applications ■ Convenient software tool "Workbench" for various sensor settings ■ SDKs available for Windows, Linux, and Arduino ■ Support for large screens using 2 or 4 sensors * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The model "WF101JSYAHMNB0" is equipped with a projected capacitive touch panel, and the brightness is 900 nits (Typ.) for the module. As an option, a resistive touch panel and a high-brightness type are also available in the lineup. It incorporates the EK79007AD3 and EK73217BCGA driver ICs and supports a 4-lane MIPI DSI interface. 【Features】 ■ Module size: 235×142×8.78mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Built-in ILI2511 supports USB and I2C interfaces * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "MIC33M356" is a high-efficiency, low-voltage input, 3A continuous current synchronous buck power module with an integrated inductor. The COT control architecture with HyperLightLoad mode provides extremely high efficiency at light loads while maintaining ultra-fast transient response. 【Features】 ■ Input voltage range (V): 2.4 to 5.5V ■ Output current: 3A ■ High efficiency (up to 95%) ■ Output voltage setting via I2C programmable ・5mV resolution: 0.6 to 1.28V ・10/20mV resolution: 0.6 to 3.84V * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "WEA Series" is a module with an integrated OLED circuit solution. It is designed to shorten development time and simplify the setup of OLED panels for customers. Customers can easily set up displays on their own devices. 【Features】 ■ Power circuit mounted on the substrate ■ OLED sizes range from 0.49 to 2.4 inches and 5.5 inches ■ Reduces development time and time to market ■ Allows easy display setup on customers' own devices *For more details, please refer to the related links or feel free to contact us.

Silvertel offers a wide range of module products for PoE, including PSE modules, DC-DC converters for inputting to PSE, and very compact PD modules. These PoE modules feature 1,500V isolation and class detection capabilities for PoE devices, allowing for designs with minimal external components. Additionally, when inquiring about Silvertel products, support for circuit design by Silvertel's specialized engineers is available. This time, we will introduce module products for IEEE802.3af from Silvertel's PoE module lineup, covering both PD and PSE. *For more details, please refer to the downloadable materials (Introduction to Silvertel's PoE Module Products for IEEE802.3af, Datasheet).

Neonode's "Touch Sensor Module" enables non-contact operation of touch panel displays and aerial images through sensing that utilizes its proprietary "zForce® Technology." By detecting objects within the sensing area using infrared, it allows for sensing while wearing gloves, using something other than fingers, or in combination with a hologram plate, thus enabling interaction with aerial images. We propose applications for safe and secure non-contact solutions that match the new normal era. 【Features】 ■ Sensing is possible while wearing gloves or using something other than fingers ■ Standard lineup includes 9 sensor sizes ranging from 115mm to 346mm (Please consult us for specific sensor size requests) ■ Touch interaction with aerial images using a hologram plate is possible ■ Support for large screens is possible using 2 or 4 sensors *For more details, please refer to the materials. ★ If you would like to see a demo unit, please feel free to contact us.

The "0201CT series" is a chip inductor that excels in communication devices using high frequencies, featuring a low mounting area, low height, high Q value, and low DCR. It can be utilized for impedance matching in high-frequency circuits and as a bias tee to separate input DC and output AC, with a lineup of 14 constants ranging from 0.06nH to 22nH. Reliability is certified AEC-Q200 Grade 1 (-40°C to +125°C), and it meets environmental standards for halogen-free RoHS compliance. 【Features】 ■ Chip inductor for high frequency ■ Low mounting area (0.58mm × 0.46mm) ■ High Q value and low DCR ■ AEC-Q200 Grade 1 (-40°C to +125°C) certified * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

The "SEARAY(TM) 0.80mm Pitch Ultra High-Density Array" is a product characterized by a 0.80mm pitch grid. With a total of up to 500 Edge Rate(R) contacts optimized for signal integrity, it enables extremely flexible routing of signals and grounds. It also offers features such as a maximum of 10 rows, 50 contacts per row, stack heights of 7mm or 10mm, and high-speed performance of 28+ Gbps. 【Features】 ■ 0.80mm (.0315") pitch grid ■ Performance: up to 17.5GHz/35Gbps ■ Robust Edge Rate(R) contacts ■ Up to 500 I/O ■ Stack heights of 7mm and 10mm * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

At Global Electronics Co., Ltd., we handle RJ45 mag jacks. The related links include a specification sheet for our product lineup, detailing transfer rates, series, tab up/down, ports, and the presence or absence of LEDs. We will guide you to suitable products from a wide range of options that are compatible with other companies, so please consult us when considering alternatives for EOL products, small lot items, or price reductions. 【Specifications (partial)】 ■ Transfer rate: 10Base-T ■ Series: 12F/14F-1X ■ Tab: Down ■ Port: 1×1 ■ LED: Both available and not available *For more details, please refer to the related links or feel free to contact us.

Silvertel offers a wide range of module products for PoE, including PSE modules, DC-DC converters for inputting to PSE, and highly miniaturized PD modules. These PoE+ modules, compliant with IEEE standards, feature 1,500V isolation and class detection for PoE devices, allowing for designs with minimal external components. Additionally, when inquiring about Silvertel products, support for circuit design by Silvertel's specialized engineers is available. This time, we will introduce module products for PoE+ (IEEE802.3at) from Silvertel's range of PoE modules, covering both PD and PSE. *For more details, please refer to the downloadable materials (Introduction to Silvertel PoE+ Module Series, Datasheet).

Global Electronics offers the 'AI Module' developed by NTQ Solution, which enables the easy implementation of AI-equipped systems on edge computers, standalone PCs, and AWS servers. This module can be utilized for a wide range of system solutions, including the detection of human skeletal structures and objects, monitoring and tracking of crowd movements or individual behaviors, intrusion detection in hazardous areas, and gesture recognition. The extracted data can also be integrated with RPA for the automation of business processes. Our company is capable of supporting the entire process from proof of concept (PoC) to commercialization based on our extensive know-how. 【Features】 ■ Real-time detection of multiple people's eyes, noses, ears, skeletons, as well as posture, movements, and gaze ■ AI has been trained on 128 types of objects ■ Analyzes movements from the skeletal structure and shape of hands to understand gestures ■ Detection is possible even with inexpensive cameras, simplifying hardware *You can view materials introducing application examples from the download link below. Please feel free to contact us for inquiries.

The "HYT939P" is a high-speed, high-precision temperature and humidity sensor equipped with a PTFE filter. It features a TO39 package with mechanical robustness, where glass and metal are sealed, and a stainless steel cap is welded to a metal header, with a pressure resistance of 16 bar. The PTFE filter significantly limits contact with VOC molecules, making it possible to minimize drift. 【Features】 ■ 16 bar pressure resistance ■ Fast response ■ Low drift, low hysteresis ■ Easily integrated and replaceable without adjustment ■ Stable even in high humidity * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The MCP60711/1U/3 is a high-precision operational amplifier with EMI filtering at 10MHz. The on-chip EMI filter provides additional protection against high-frequency interference. It features excellent performance such as low input offset error and low noise, achieving higher measurement accuracy across a wide range of applications. Additionally, the single operational amplifier is available in SC70 and SOT-23 packages (MCP60713 only with SHDN pin). 【Features】 ■ Shutdown pin available only on MCP60713 ■ Enhanced EMI protection ■ Supports extended temperature range ■ Rail-to-rail input/output ■ EMIRR: 81dB at 2.4GHz (typical) *You can download the English version of the catalog. *For more details, please feel free to contact us.

The "Green Line" is a range of environmentally friendly inlet/outlet products from SCHURTER. The company offers products made from plant-based resins. The applicable products include AC inlet/outlet series 6100-3, 6100-4, 6102-3, 6102-5, 6600-3, and 6600-4, which comply with IEC60320. Please feel free to contact us if you have any requests. 【Features】 ■ Connector shape: C14/C18/F ■ Rated current ・IEC: 10A/250VAC; 50Hz ・UL/CSA: 15A/250VAC; 60Hz ■ Operating temperature range: -25℃ to +70℃ ■ Made from plant-based resins that meet glow wire test requirements * You can download the English version of the catalog. * For more details, please feel free to contact us.

We would like to introduce the "LAN8830" that we handle. An integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical layer transceiver for sending and receiving data over standard CAT-5, CAT-5e, and CAT6 unshielded twisted pair (UTP) cables. It provides RGMII (Reduced Gigabit Media Independent Interface) for connection to the MAC. 【Features】 ■ RGMII with 3.3V/2.5V/1.8V tolerant I/O ■ Support for jumbo frames up to 16KB ■ On-chip LDO controller supporting single 3.3V power operation ■ Available in commercial and extended industrial temperature ranges * You can download the English version of the catalog. * For more details, please feel free to contact us.

We would like to introduce the 'PolarFire SoC FPGA' that we handle. It combines low power consumption, thermal efficiency, and defense-grade security, enabling the miniaturization of intelligent systems. Additionally, it features 25K to 460K logic elements (LE) and is equipped with 12.7Gbps transceivers. 【Features】 ■ Low power consumption FPGA with non-volatile process ■ Equipped with five 64-bit RISC-V processor cores ■ Low power transceivers optimized for 12.7Gbps ■ Space-saving due to the elimination of configuration ROM ■ High reliability with strong soft error tolerance *For more details, please download the PDF (English version) or feel free to contact us.

The MCP6C26 is a current sensing amplifier that provides input offset voltage correction for very low offset and offset drift. It is available with preset gains of 50, 100, and 200 V/V. The input common mode range is -0.2V to 36V, and the operating supply voltage is 2.7V to 5.5V. Additionally, the maximum gain error is ±0.5%, and the maximum input offset voltage at a preset gain of 200 V/V is 65μV. 【Features】 ■ Zero drift ■ Maximum gain error: ±0.5% ■ Operating supply voltage: 2.7V to 5.5V ■ Temperature range: -40℃ to +125℃ ■ Package size: 2.0 × 1.25mm *For more details, please download the PDF (English version) or feel free to contact us.

The MCP14700 is a high-speed synchronous MOSFET driver designed to properly drive high-side and low-side N-channel MOSFETs. It has two PWM inputs, allowing for individual control of external N-channel MOSFETs. Additionally, the transition thresholds for the PWM inputs are 1.6V for rising PWM input signals and 1.2V for falling PWM input signals, making it suitable for controllers using 3.0V TTL/CMOS logic. 【Features】 ■ Independent PWM input control for high-side and low-side gate drive ■ HIGHDR and LOWDR source current: 2A ■ Low supply current: 80µA (typical) ■ 8-lead DFN/SOIC *For more details, please download the PDF (English version) or feel free to contact us.

The "RNWF11PC" is a standalone Wi-Fi module that supports IEEE 802.11b/g/n in the 2.4GHz band and can be controlled via AT commands. It has a built-in TCP/IP protocol stack and allows the use of Socket API through UART text commands from a microcontroller. Additionally, the module is available in two types: one with a built-in PCB antenna and another that can connect to an external antenna via an FL connector. 【Features】 ■ Control via AT commands sent over UART ■ Supports IEEE802.11b/g/n 2.4GHz ■ Usable in AP (Access Point) and STA (Station) modes ■ Built-in TCP/IP protocol stack ■ Obtained radio certification in various countries *For more details, please download the PDF (English version) or feel free to contact us.

We would like to introduce the 'dsPIC33CK/MP' that we handle. It is equipped with high-precision analog functions, enabling the design of digital power supplies, motor control, advanced sensing and control, high-performance general-purpose applications, and robust applications. Additionally, it includes many hardware features that help simplify functional safety certification for automotive and industrial safety-critical applications, focusing on ASIL-B and SIL-2. 【Features】 ■ Up to 256KB of program flash with ECC and live update ■ Independent PWM (×8) with a resolution of up to 250ps ■ 12-bit ADC (×3) with up to 3.5MSPS ■ Compliance with ISO26262 and IEC61508 functional safety *For more details, please download the PDF (English version) or feel free to contact us.

The MCP1826 is a 1A low dropout (LDO) linear regulator that provides high current/low output voltage. It is available in fixed or adjustable output voltage versions, with an output voltage range of 0.8V to 5.0V. Due to its CMOS structure, the quiescent current consumed is typically less than 120μA across the entire input voltage range, making it attractive for portable computing applications that require high output current. 【Features】 ■ Output load current: up to 1A ■ Low dropout voltage: 300mV (Typ) ■ Low supply current: 120µA (Typ) ■ Low shutdown current: less than 0.1µA (Typ) ■ Package: DDPAK-5/TO-220-5/SOT223-5 *For more details, please download the PDF (English version) or feel free to contact us.

The product code "WL0F00035000XGFAASA00" is a standard item in the smart display series. The TFT panel features a wide viewing angle (80/80/80/80 degrees) and has a resolution of 320×240 pixels. It employs a UART communication interface, and the UI is drag-and-drop, making it possible for beginners to create without coding. With the smart UART module equipped with a built-in STM32 MCU, there is no need to separate design and functionality, allowing for simple displays and complex functions to be handled easily and efficiently, thus reducing development costs. 【Features】 ■ Input voltage: 5–28V (normal voltage: 12V) ■ Operating temperature: -30 to +80℃ ■ Supports ST development tools ■ Real-time simulation *For more details, please download the PDF (English version) or feel free to contact us.

The MCP39F511A is a highly integrated, complete single-phase power monitoring IC designed to measure input power from AC or DC power sources in real-time. It is suitable for a wide range of consumer and industrial applications and can detect input voltage to operate in either DC mode or AC mode. It includes a dual-channel delta-sigma ADC, a 16-bit computation engine, EEPROM, and a flexible two-wire interface, providing separate calibration registers for AC and DC, ensuring high-precision measurements in both modes. **Features** - Built-in 512 bytes EEPROM - UART interface - Single-phase power monitoring - Low drift internal reference 10ppm/℃ - Accuracy exceeding 0.1% over a dynamic range of 4000:1 *For more details, please download the PDF (English version) or feel free to contact us.*

The "ZDD-0312A02-11" is a custom-designed 7-segment LED product. It is equipped with ultra-bright amber chips (AlGaInP), providing excellent character display and visibility. With a viewing angle of 170°, it allows for clear and highly visible displays from various angles, making it suitable for a wide range of applications and environments. 【Features】 ■ Continuous and uniform segments ■ Low power consumption ■ Uses ultra-bright amber chips / high contrast ■ Complies with RoHS EU directives *For more details, please download the PDF (English version) or feel free to contact us.

The "HYT271 MK33" is a robust and compact digital humidity and temperature module assembly made of stainless steel for oil moisture meters. It is suitable for monitoring the moisture content in mineral oils, synthetic oils, and fuels, and provides information regarding the condition and lifespan of oils through its relative humidity output. Additionally, the small screw-in housing and cable connection with a digital I2C interface facilitate easy system integration. 【Features】 ■ Moisture content sensor for oil and fuel ■ Operating temperature range: -40 to 120℃ ■ Operating humidity range: 0 to 100[%RH] ■ Accuracy ・Temperature ±0.2℃ ・Humidity ±3%RH@23℃ ■ Digital interface: I2C (address 0×28) *For more details, please download the PDF (English version) or feel free to contact us.

The "Ag59600-LPB series" is a PD module compliant with IEEE802.3bt/at/af. It offers a DC-DC conversion efficiency of 94%, with a maximum output of 60W and a typical output of 51W, and the output voltage can be selected from 12V and 24V. Additionally, as a PoE++, it is one of the smallest in the world, making it suitable for compact products that cannot accommodate discrete designs. 【Features】 ■ PD module compatible with power class 6 ■ World's smallest size SMT 40mm × 25mm × 16mm (H) ■ Equipped with overcurrent protection, short-circuit protection, and thermal protection functions ■ Two models with output voltages of 12V and 24V ■ Low ripple and low noise *For more details, please download the PDF (English version) or feel free to contact us.

The "Ag6130" is a PSE module compliant with IEEE802.3at/af, capable of outputting up to 75W. As a PSE module, it is one of the smallest in the world and can be used in compact products that cannot accommodate discrete designs. Furthermore, it is designed for use in industrial terminals, with an operating temperature range of -40°C to 85°C. 【Features】 ■ PSE module supporting a wide range of power classes ■ World-class smallest SMT dimensions of 21mm × 14mm × 5mm (H) ■ Equipped with overcurrent protection, short-circuit protection, and thermal protection functions ■ Includes Maintain Power Signature (MPS) functionality ■ Single power supply type *For more details, please download the PDF (English version) or feel free to contact us.

The "MFC042A-BH" is a reflective 4.2-inch LCD display panel module. It is designed to provide excellent visibility in outdoor and natural light environments, achieving low power consumption without the need for a backlight unit. It leverages energy efficiency, lightweight design, and high visibility, making it suitable for various fields of use. This display is particularly effective for devices that require battery operation or in situations where ambient light is crucial. 【Features】 ■ Usable indoors and outdoors ■ Display colors: white, black, red ■ Semi-customizable ■ Long lifespan ■ Energy-saving *For more details, please download the PDF (English version) or feel free to contact us.

The "HYT.R.411" is a ultra-fast response temperature and humidity sensor module for meteorological applications. It is a digital (I2C) module designed to achieve excellent reproducibility and response speed required for weather observation balloons and drones. Ultra-fast measurement (under 23°C environment, humidity response time less than 0.5 seconds, temperature response time less than 2 seconds) - suitable for operation measurements down to -80°C. 【Features】 ■ Ultra-fast response time ■ Accurate measurements at low temperatures and high altitudes ■ Excellent temperature and humidity reproducibility ■ Factory calibrated, replaceable module ■ Digital I2C interface *For more details, please download the PDF (English version) or feel free to contact us.

The "Ag97000-FL" is a PD module that has reviewed the component costs and layout of the old model "Ag9700-FL," achieving higher cost performance and single-sided mounting. Compared to the old model, it has approximately a 20% price reduction, and the width has become about 30% thinner due to single-sided mounting, with a bridge rectifier also built-in. Additionally, to prevent damage to the PD from "out-of-spec" voltage during startup, the low voltage startup function has been enhanced, improving reliability and robustness. 【Features】 ■ IEEE802.3 compliant PD output power: 12W, 9W ■ Single-sided mounting module design ■ Dimensions: 56mm (length) × 14mm (height) × 13mm (depth) ■ Configurable power class: Class 0 to 3 ■ Output voltage: 5V, 12V, 24V ※ For more details, please download the PDF (English version) or feel free to contact us.

The "MFR090B-BW" is a 9.0-inch horizontal transmissive TFT LCD module. It features a high resolution of 800×480 and a brightness of 480cd/m², providing excellent visibility. It adopts an RGB interface, making it suitable for industrial equipment and control terminals. Additionally, its slim design (thickness of 5.25mm) and reliable quality allow it to cater to a wide range of applications, and it can be customized for options such as adding a touch panel. 【Features】 ■ High-resolution images ■ Slim and lightweight design ■ Viewing direction: 12 o'clock ■ Customizable options *For more details, please download the PDF (English version) or feel free to contact us.

We would like to introduce our "Thermal Management Solution" created through the collaboration of SiC power semiconductors and high-performance heat sinks. This solution is compatible with discrete products from Microchip's power semiconductor line and offers thermal design support tailored to your usage conditions. Additionally, it features heat dissipation optimization to maintain product lifespan and performance, as well as compact design proposals that accommodate space constraints. 【Features】 ■ Compatible with discrete products from Microchip's power semiconductor line ■ Ideal combination with globally manufactured standard/custom heat sinks (e.g., 16PB056-01032, 20PB026-01032) ■ Thermal design support tailored to customer usage conditions ■ Heat dissipation optimization to maintain product lifespan and performance ■ Compact design proposals that accommodate space constraints *For more details, please download the PDF or feel free to contact us.

The "Ag6810" is a surface mount PSE module that supports IEEE802.3af (15.4W), IEEE802.3at (30W), and IEEE802.3bt Type 4 (90W Class 8). It can provide a maximum output of 95W for Type 4 PSE (PoE++), making it suitable for compact products that cannot fit into discrete designs. It is ideal for applications requiring PSE functionality, such as IP cameras, AV streaming, IoT, home networking, and industrial Ethernet. 【Features】 ■ Maximum output: 95W ■ World's smallest SMT size: 28mm × 18mm × 5mm (H) ■ Equipped with overcurrent protection, short-circuit protection, and thermal protection features ■ Includes Maintain Power Signature (MPS) functionality ■ Single port (Power Type Type 2, 3, 4) *For more details, please download the PDF (English version) or feel free to contact us.

The "HYT271" is a high-speed response temperature and humidity sensor module with dimensions of just 10.2mm × 5.1mm × 1.8mm. It offers a wide range of applications and an excellent price-performance ratio, making it a suitable solution for fast measurements and complex mass applications. Additionally, with SIL contacts, it can be integrated into various assemblies, providing accurately calibrated and temperature-compensated parameters for relative humidity and temperature. 【Features】 ■ Fast response time (humidity under 4 seconds, temperature under 5 seconds) ■ Excellent temperature and humidity measurement accuracy ■ Low hysteresis ■ Low drift ■ Fully calibrated and temperature-compensated sensor *For more details, please download the PDF (English version) or feel free to contact us.

The "WFN0276A2T0YADNN000" is a 2.76-inch round IPS TFT LCD display module. It offers a resolution of 480×480 pixels, and the surface is treated with an anti-glare finish to reduce reflections and improve visibility under various lighting conditions. Additionally, it features a 3W SPI + RGB 18-bit interface and is equipped with the ST7701 driver IC, ensuring smooth integration and reliable display performance. 【Features】 ■ Wide viewing angle ■ Low power consumption for long operation ■ Input voltage range: 2.7V to 3.3V (TYP: 3V) ■ Smooth screen transitions *For more details, please download the PDF (English version) or feel free to contact us.

The WEO006448B is a low-power COG OLED with a diagonal size of 0.66 inches and a resolution of 64×48 dots. It has an integrated SSD1315 and supports 6800, 8080, 4-wire SPI, and I2C interfaces. The supply voltage for the logic circuit is 3V, while the supply voltage for the display is 7.5V. The typical current consumption of the display is 3mA at 7.5V VCC with a 50% display, and the driving duty is 1/48. It supports both internal voltage conversion circuits (charge pump) and external VCC supply. 【Features】 ■ High resolution with 64×48 pixels for clear visual display ■ Graphic OLED ■ Low power consumption with a 3V operating voltage ■ Interfaces for 6800, 8080, 4-wire SPI, and I2C ■ Emission colors are white and yellow *For more details, please download the PDF (English version) or feel free to contact us.