イートン・エレクトリック・ジャパン List of Products and Services

Terminal block ideal for wiring branch circuits How do you wire from the secondary of the main switch to individual branch circuits? Generally, it is done by: - Performing jumper wiring - Providing a perforated bar - Using a branch bar However, when considering the wiring in this area from the perspective of standards, particularly compliance with North American standards, it is necessary to take various requirements into account. North American standards - NEC, NFPA79, UL508A - apply what is known as the "tap rule" to this area, and unless these wiring regulations are followed along with proper equipment selection, it cannot be said to comply with North American standards. By using the power distribution block (PDB) from Moeller, wiring in this area can be done easily and in compliance with the aforementioned North American standards. Additionally, by using this PDB in combination with specified fuses, the SCCR value can be set to 100kA. ● Compliant standards: UL, CE, IEC ● Rated current: 115-310A/UL, 125-400A/CE ● Number of poles: 1P/3P

The "MSFS Feeder System" forms the basis for safe and innovative energy distribution of up to 125A, achieving high flexibility and scalability. 【Features】 ■ Easy one-touch installation on DIN rails with a single board design ■ Available in two sizes: 225 mm and 405 mm ■ Universal adapter for mounting conventional DIN rail devices ■ Freely adjustable with a grid width of 4.5 mm ■ Supplies up to 125A of power with four or eight outlets ■ Forms the basis for safe and innovative energy distribution of up to 125A *For more details, please refer to the PDF materials or feel free to contact us.

The CI case is the most reliable control panel case with a 'double insulation' structure that our company has adopted for the first time. - With a protection structure of IP65, it can be used in any environment. - It demonstrates high reliability and safety for human protection and equipment protection. - Being a box type, it allows for various combinations and is easy to expand. - It features a 'total insulation = double insulation' structure, which does not age. The term 'total insulation = double insulation' was first used by our company and was later adopted by IEC standards. - There are also our products housed in CI cases. This not only saves assembly time but also enables the use of products in harsh environments on their own. - It is made of fiberglass-reinforced polycarbonate.

We will reduce the size of the panel! The busbar adapter is a wiring accessory that covers the copper busbar and allows for the installation of control equipment on the front. - Space-saving for starters inside the control panel - Pre-wired, so no tools are needed, significantly reducing work time - Savings on branch wiring materials - No need to worry about wire sizes for North America (UL compliant) and Europe (CE compliant) - Busbar adapters are available for 125A, 250A, and 630A. We strongly recommend this to customers with the following conditions: - Using a main breaker rated at 125A or higher in the distribution or control panel - Need for compacting the size of the distribution or control panel - Want to reduce the total cost of the distribution or control panel - Have many three-phase motors and load equipment (more than 11 units) installed in the machinery.

Essential for electrical system wiring, these are the earth seals and lightning marks. - Earth mark seal: Diameter 9mm, 100 pieces per bag - Lightning mark (small): 22mm tall x 25mm wide, 50 pieces per bag - Lightning mark (medium): 48mm tall x 43mm wide, 20 pieces per bag - Lightning mark (large): 140mm tall x 122mm wide, 10 pieces per bag

Main Features: Flexible copper bar (electrified wire) CU-BAND that sets a new standard 【Conductor Material】 - High conductivity Cu-ETP 99.9 - Tin-plated thin copper sheet - Suitable for drilling and punching 【Insulation】 - Reinforced edges to improve resistance - High operating voltage - Homogeneous and stress-free insulation (no edge bursting) - Higher thermal short-circuit resistance compared to bars and cables of the same class - Abundant color variations - Self-extinguishing in accordance with UL94 V0 【General Specifications】 - Rated operating voltage: 1000 VAC / 1500 VDC (UL standard below 600 VAC) - Insulation resistance: 20 kV/mm - Insulator heat resistance temperature: up to +105 °C - Length: 2000mm - UL certified

This is a versatile, rail-mounted type of panel-mounted outlet. - Complies with VDE and ÖVE - Easy to install in the panel due to rail mounting. - Number of poles: 2 poles + PE - Rated current: 16A, rated voltage: 250VAC - Connection wire size: 1-25mm², 2×1-25mm² - Front dimensions: 75mm (height) × 44mm (width)

The Eaton XAP series of enclosed busbars has been developed by Eaton in response to market demand. The busbars can be installed vertically or horizontally, covering a current range from 250A to 6300A, making them suitable for a wide range of applications such as factories, data centers, and commercial centers. 【High Safety】: - High safety is achieved by selecting phase conductors with more than 50% capacity compared to the ground wire; - Mylar EL polyester film is used as the insulating medium, providing insulation characteristics of up to 10kV per layer, fire class B, and being safe and environmentally friendly; - High compatibility; - Compatible with Eaton's DX series distribution boards and triple boxes; - Available with feeder busbars up to IP65 and plug-in busbars up to IP54; - A variety of breakout units and accessories are available.

- Push Button Configurator - SL7/SL4 Signal Tower Configurator You can assemble the required signal tower with just a few clicks. Simulate the light and sound functions online and directly check whether the appropriate modules are selected. - PowerXL Series Inverter Selection This online selection tool is a simple planning solution for quickly selecting the inverters needed for your application, along with the associated switchgear, protective elements, chokes, and filters, along with their corresponding product numbers. - SISTEMA Safety Software The manufacturer-independent calculation tool SISTEMA assists in the evaluation of safety-related control components in accordance with EN ISO 13849-1, simplifying risk assessment analysis. The selection of the design structure of protective devices and the allocation to architectures compliant with EN ISO 13849-1 are implemented in a Windows user interface. Based on this, the software calculates the reliability values and the achieved performance level (PL).

We provide the following for UL508A control panels for North American export: - Explanation of basic knowledge including SCCR (with videos) - Component selection circuit diagrams and table information - A wealth of technical materials - Component catalog downloads and more.