日本オートマチックマシン List of Products and Services

This model is equipped with a swivel base featuring a rotating and tilting mechanism, along with a table that has T-slots. It can be widely used for cutting, grinding, and engraving processes.

• Vice Clamps

The vice body is finished with a high-precision and high-rigidity design by adopting a one-piece frame treated with SKS full hardening. Side Lock Pin System To facilitate installation on machining centers, the protrusion of the clamp bolts is minimized, and by selecting the positioning holes for the side lock pins, it is possible to quickly change the position of the movable jaw.

• Vice Clamps

●The pallet material is high-strength tempered steel. It features high-precision grinding finish. ●It is suitable for high-precision cutting and tapping processing using NC/MC. ●It is possible to combine the pallet and vice according to the MC. ●Parallel specifications are also available for mounting a pallet changer.

• Vice Clamps

By utilizing the EXC's system, you can enhance the efficiency of high-precision palletizing systems mounted on machine tools in the field of high-precision machining, improve machining accuracy, and further improve the working environment. The potential of the J.A.M. precision vise expands even further. Easy Pallets equipped with J.A.M. precision vises can be used immediately after purchase. Economical J.A.M. precision vises offer cost advantages compared to complex jigs. With J.A.M. precision vises, parallelization is easy. Environment Friendly J.A.M. precision vises use rust-resistant material DJ, equivalent to the clamping chuck body (manufactured by EROWA and System-3R). ● The Exc's system is an original sub-plate attached to the J.A.M. precision vise, which can be used in combination with macro pallets (from System-3R) or centering plates (from EROWA). ● Customers can prepare the centering plates or macro pallet elements. ● It is also possible to provide them with the centering plates or macro pallets already set up.

• Vice Clamps

JWS761/762/763/764/765/767 Note 1) The wire-cut bridge is a made-to-order product. Note 2) Please specify the L dimension (pitch of the machine mounting hole). JWS761-□□□ L dimension specification (distance between the tapped holes for workpiece mounting on the machine body table) Note 3) We also offer production with special specifications. For more details, please contact our sales department. Note 4) Sales are in units of one.

• Vice Clamps

It is a set of 6 pairs of the same size.

• Vice Clamps

There is a diamond for the dresser as an option.

• Vice Clamps

The material is SKS. Hardened to HRC60° and finished by grinding. ● Sign bars for angle setting and measurement ● Positioning auxiliary blocks usable for both cutting and grinding processes ● Auxiliary dressers for shaping grinding wheel on grinding machines ● Grinding wheels for polishing and lapping of machine parts, mold parts, etc. ● This is an electroplated diamond grinding wheel that can widely accommodate rough cutting, burr removal, chamfering, and other difficult-to-machine materials before grinding.

• Vice Clamps

●Compact low-back design (Light Angle H=4.3mm) ●Safe fitting (Insertion guide + Backrest) ●Prevention of incorrect fitting and misalignment

• Board to Cable Connector

● The housing adopts a double-arm lock mechanism that excels in workability, allowing for a more reliable connection. ● By providing an adsorption surface on the straight-type wafer, it enables substrate mounting without the need for adhesive tape or covers, and there is no need for a process to remove tape or covers after mounting. ● It has a structure that is resistant to prying and prevents reverse insertion.

• Board to Cable Connector

●The contact method features a double-sided lever contact structure that guarantees high reliability against micro-sliding. ●The housing and wafer have a secure locking and anti-misinsert structure. ●The wafer is designed as a complete BOX type with measures against distortion. ●Compact high-density mounting design.

• Board to Cable Connector

HG Series (High-Grade Type) This is a handle-operated vice with a built-in mechanism to prevent vice deformation, suitable for ultra-precision machining in cutting and grinding.

• Vice Clamps

Crank-type servo press with a pressure capacity of 98 kN Position Control You can select the most suitable option for processing from C-frame, 4-column post guide, and frame structure. ● The ram (slide) can be synchronized with peripheral devices using arbitrary output signals. ● The press ram slide in this series is highly precise due to the V-type sliding guide. ● Various ram operating conditions can be set using TP. Versatile settings for ram operating conditions ● The ram stop position and speed can be set arbitrarily according to the nature of the workpiece and mold dimensions, allowing for processing under optimal conditions. ● The ram (slide) can be synchronized with peripheral devices using arbitrary output signals. The cast C-frame and ram slide utilize V-guide sliding, providing high rigidity and precision processing for a wide range of applications.

• Plastic processing machines (cutting and rolling)
• Other processing machines

C-face processing can be performed at speeds over ten times that of a grinding machine, resulting in significant cost reductions. ● This is a manual slide table chamfering machine. C-face processing can be done safely and quickly without leaving scratches on the workpiece. ● We process C-faces required for mold parts and machine parts cleanly, quickly, and accurately. ● Equipped with diamond and borazon wheels of Jam's original specifications, which excel in durability and cutting performance. ● The inverter control allows for customizable cutting conditions within the range of 0 to 8,500 r.p.m. ● Dry processing is used, and no grinding fluid is employed.

• Other machine tools