エナパック List of Products and Services

This is a maintenance set that includes a variety of tools necessary for maintenance work. For more details, please contact us or refer to the catalog.

The "small diameter plastic hose" is a small diameter high-pressure nylon hose that can be used under high pressure. It eliminates the need for bending processing by a bender, significantly reducing the work hours for complex piping and long piping tasks. The SSHW type wire braid hose is a hose protected by a wire braid (SUS) on the outer diameter of the high-pressure nylon hose, designed to be resistant to wear and cracking. 【Features】 - The hose is standardized to meet a variety of needs. - It is an ideal hose for piping applications such as miniature cylinders and work clamps. For more details, please contact us or download the catalog.

This is a tool for widening the gap of flanges for cleaning gaskets and flange surfaces, as well as for valve replacement. For more details, please contact us or refer to the catalog.

All hydraulic equipment, including a pump, hose, cylinder, gauge, adapter, and a wooden case, is supplied as a complete set. For more details, please contact us or refer to the catalog.

It is possible to bend pipes smoothly and without wrinkles. For more details, please contact us or refer to the catalog.

The "Super Large Lift Hydraulic Cylinder Series" is a product specialized for jack-up operations. We offer a lineup including the "HCG Series Single Acting Cylinder," "HCR Series Double Acting Cylinder," and "HCL Series with Safety Lock Nut." This product, combined with Enerpac hydraulic pumps, creates a world-class hydraulic system that ensures the safe and reliable execution of very challenging jack-up tasks. 【Features】 ■ Hard coating treatment applied, strong against eccentric loads with high-frequency specifications ■ The exterior and interior of the cylinder are designed to withstand bad weather ■ Easy operation due to the low-friction structure of the safety lock nut ■ Bearing technology prevents wear of the entire cylinder and internal damage even under strong eccentric loads ■ Low wear ultra-high pressure hydraulic seal technology *For more details, please refer to the PDF materials or feel free to contact us.

The "Multi-stage Telescopic Hydraulic Cylinder Series" is a product equipped with a tilt saddle that allows for an inclination of up to 5 degrees. Additionally, it comes standard with two certified lifting eyes. 【Features of the RT Series】 ■ Maximum capacity: 137 - 309 kN ■ Stroke: 270 - 600 mm ■ Maximum operating pressure: 70 MPa *For more details, please refer to the PDF document or feel free to contact us.

The Enapak Ultra Flat Hydraulic Cylinder Series offers two options: "Tilt Type (CUSP Series)" and "With Stop Ring (CULP Series)." These products feature an ultra-low profile and can handle a maximum eccentric load of 4%. Additionally, the nitro carburizing surface treatment enhances wear resistance and prevents corrosion. 【Features】 ■ CUSP Series - Tilt type - Plunger with an inclination function that accommodates 2 to 4° - The limit stroke can be visually confirmed by the red line on the plunger ■ CULP Series - With stop ring *For more details, please refer to the PDF document or feel free to contact us.

The "HCRL Series" is a double-acting hydraulic cylinder that can maintain a load for an extended period due to its mechanical safety lock nut. It supports a maximum operating pressure of 70 MPa and allows for hydraulic control of both pushing and retracting. It can withstand eccentric loads of up to approximately 10% of the cylinder's maximum capacity. Designed for high-frequency use with hard coating treatment, the tilt saddle attached to the cylinder can accommodate inclinations of up to 5 degrees. 【Features】 ■ Maximum operating pressure of 70 MPa ■ Coating specifications for both internal and external surfaces to withstand bad weather ■ Equipped with an over-stroke prevention stop ring ■ Low-friction safety lock nut allows for quick tightening *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

The "ZC Series" is a cordless hydraulic pump that combines the portability and convenience of a battery-operated pump with high durability and quiet operation. In addition to not emitting exhaust gases, it features a powerful brushless electric motor (1.0 kW) that achieves a maximum discharge capacity of 70 MPa. By adopting a large lithium-ion battery, it can operate a double-acting hydraulic jack with a capacity of 100 tons and a stroke of 150 mm for approximately 50 cycles under no load. 【Features】 ■ Battery-operated, eliminating concerns about flammability and exhaust gases ■ Convenient and easy-to-operate pendant cord of 3 meters ■ Fully rechargeable in just 1 hour ■ Noise level below 80 dBA *For more details, please refer to the materials. Feel free to contact us with any inquiries.

The "HM Series" is designed to fit all standard flanges and features a hydraulic bolt tensioner with a 30% increase in load capacity compared to conventional models. It has a long stroke of 15mm (9/16 inch), eliminating over-stroking. Additionally, the safety of handling is improved with a non-slip grip, and we also offer the "GT Series," which is suitable for a wider range of tasks. 【Features】 <HM Series> ■ 15 types of load cells from M20 to M100 or 3/4" to 4" ■ Twin ports for quick connection of multiple tools ■ Maximum bolt load capacity of 150MPa ■ Captive socket eliminates the risk of falling objects ■ Interchangeable adapter kits available ■ Improved handling safety with a non-slip grip *For more details, please refer to the PDF document or feel free to contact us.

This product is a "flat face one-touch coupler" that allows for secure connection of male and female couplers with a single touch operation, and easy disconnection. The flat shape of the connection part prevents the intrusion of foreign substances and facilitates cleaning of the coupler, making it suitable for connecting hydraulic equipment at construction and shipbuilding sites. Due to the flat shape of the connection part between the male and female couplers, there is no oil leakage during attachment and detachment. 【Features】 ■ The coupler is equipped with a rubber dust cap and a turn lock (anti-disconnection) mechanism at the coupling part. ■ The F-604 type coupler has been approved for safety and performance by HTMA. ■ Secure connection of male and female couplers with one-touch operation. ■ The flat shape of the connection part prevents the intrusion of foreign substances. ■ Suitable for connecting hydraulic equipment at construction and shipbuilding sites. *For more details, please refer to the PDF materials or feel free to contact us.

The "PGT Series" is a hydraulic bolt tensioner designed for high-precision tightening operations of wind, steam, and gas turbines. The "FTR Series" hydraulic bolt tensioner is specially designed to apply tension to the foundation bolts of wind turbines. Additionally, the oval-shaped hydraulic bolt tensioner "FTE Series" is specifically designed for securing the foundations of wind power generation towers. We also offer hydraulic bolt tensioners for power generation systems and foundations. 【Features】 ■ PGT Series - Designed for high-precision tightening operations of wind, steam, and gas turbines ■ FTR Series - Specially designed to apply tension to the foundation bolts of wind turbines ■ FTE Series - Specially designed for securing the foundations of wind power generation towers - High-precision tightening operations result in less frequent maintenance *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the clamp cylinder accessories that we handle. Starting with the contact bolt "BS Series," which can be attached to the end screw of the cylinder and used as a workpiece pressing fixture, we also offer flange nuts "FN Series," flange mounts "MF Series," and more. In addition, we also handle clamp cylinder mounting blocks "MRS-100F, MRS-200F, MRS-300F." 【Features】 ■ Flange Nut "FN Series" - Suitable for locking the cylinder after mounting a body screw type cylinder at any desired position. ■ Flange Mount "MF Series" - Allows for the fixing of the cylinder using a square flange mount according to the application. *For more details, please refer to the PDF materials or feel free to contact us.

The swing clamp's maximum flow rate per clamp cylinder is determined by the length of the arm used, and the intersection of the arm length and curve represents the clamping force. When determining the clamping force, please adjust the arm length within the allowable clamping force and be careful not to damage the plunger rod during installation. This document includes graphs showing the relationship between arm length, clamping force, and maximum flow rate for the separately sold long arm "CAL series" and the separately sold standard arm "CAS series," as well as dimension diagrams for the mounting parts when fabricating the arm. Please take a look. [Contents] - Graph of arm length: clamping force: maximum flow rate relationship - Clamping arm dimension table - Dimension table for arm fabrication - Example of usage conditions for the 5kN series - Dimension diagram for mounting parts when fabricating the arm *For more details, please refer to the PDF document or feel free to contact us.

The "KNS70" is a compact digital pressure switch with a flexible display that can rotate 330 degrees, allowing for adjustment of the display to a more visible direction after installation. It features a peak hold function that retains the maximum pressure and a valve hold function that retains the minimum value. The materials used for the gas and liquid contact parts are highly corrosion-resistant SUS316L, making it compatible with both gas and liquid measurement media. 【Features】 ■ Flexible display that can rotate 330 degrees ■ Ability to adjust the display to a more visible direction after installation ■ Peak hold function that retains the maximum pressure and valve hold function that retains the minimum value ■ Settings for Hi and Lo, allowing for the configuration of comparison values and hysteresis ■ Compatible with both gas and liquid measurement media *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Automatic Couplers." The block-integrated models "AUC-115" and "AUN-115-PF1/4" are suitable for systems that automate the connection and disconnection of hydraulic piping, such as hydraulic cylinders. The screw-in models "L391234" and "L391235" feature external threads on the coupler body, making them easy to integrate and allowing for direct attachment to manifold blocks. The specifications and connection accuracy are the same as the block-integrated models. 【Features】 ■ Block-integrated type - Suitable for systems that automate the connection and disconnection of hydraulic piping, such as hydraulic cylinders. ■ Screw-in type - Features external threads on the coupler body, making integration easy and allowing for direct attachment to manifold blocks. *For more details, please refer to the PDF materials or feel free to contact us.

The "NC Series" is a hydraulic nut cutter that has become easier to use due to its unique angled head design. It can be used for various applications such as railway maintenance, plumbing work, tank maintenance, petrochemical plants, steel materials, mining, and structures. The double-blade type splits the nut with a movable blade and expands it with a fixed blade, allowing the nut to be rotated and removed manually in one operation. 【Features】 - Easier to use due to the unique angled head design - The cylinder of the nut cutter is single-acting with a spring return type - Each nut cutter comes standard with a spare blade (chisel), screws and a wrench for fixing it, and a female coupler * All models require a hydraulic pump and hydraulic hose * For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the air-cooled and water-cooled oil coolers, oil level switches, and temperature switches that we handle. When using electric pumps at high pressure for extended periods or when the frequency of cylinder use is high, the operating oil temperature of the pump may rise abnormally, leading to potential failures. Therefore, please use an oil cooler to prevent the rise in oil temperature. Additionally, please select the standard models of water-cooled and air-cooled coolers for the "ZEJ series" and "PE6100 series" electric pumps. (Models with an A or W at the end of the model number) Oil level switches and temperature switches are effective for detecting tank oil levels and oil temperatures. 【Product Lineup】 ■ Air-Cooled Oil Coolers ・EX-090-200V ・PAC-3 ■ Water-Cooled Oil Coolers ・PWC-3 ・PWC-5 *For more details, please refer to the PDF document or feel free to contact us.

The "NSH Series" is a hydraulic nut splitter designed to comply with BS/ANSI flange standards. The cutting depth of the nut can be adjusted using the blade positioning scale to prevent damage to the bolt. It features an ergonomic design and a user-friendly handle position. The nut splitter has been certified as compliant with the 94/9/EC "ATEX Declaration" based on test results. 【Features】 ■ Designed to comply with flange standards ■ An ideal tool for removing nuts ■ Adjustable cutting depth to prevent bolt damage ■ Cutting heads and power heads can be exchanged according to application ■ Ergonomic design and user-friendly handle position *For more details, please refer to the PDF materials or feel free to contact us.

The "V82HK" is a hydraulic valve used for opening and closing hydraulic circuits, designed for a maximum operating pressure of 70 MPa. It is suitable for minor pressure relief within the system and for maintaining pressure in low flow rate pumps. The allowable flow rate is 12 L/min, and the port size is NPT 3/8. Please feel free to contact us for inquiries. 【Specifications】 ■ Maximum operating pressure (MPa): 70 ■ Allowable flow rate (L/min): 12 ■ Port size: NPT 3/8 ■ Weight (kg): 0.8 *For more details, please refer to the PDF document or feel free to contact us.

The "V82HK" is a hydraulic valve used for opening and closing hydraulic circuits, designed for a maximum operating pressure of 70 MPa. It is suitable for minor pressure relief within the system and for maintaining pressure in low flow rate pumps. The allowable flow rate is 3 L/min, and the port diameter is NPT 1/4. Please feel free to consult us when you need assistance. 【Specifications】 ■ Maximum operating pressure (MPa): 70 ■ Allowable flow rate (L/min): 3 ■ Port diameter: NPT 1/4 ■ Weight (kg): 0.2 *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the "customized and special-order hydraulic units" handled by Enapak Corporation. Leveraging our extensive experience and proven track record, we respond to the diverse needs of our customers with a wealth of custom hydraulic unit production achievements. For special orders that can be configured with modular equipment, we can accommodate everything from specification confirmation to design and manufacturing in a short lead time. 【Features】 ■ Abundant production experience unique to a comprehensive manufacturer of ultra-high pressure equipment ■ Shortened production time through the modularization of various valves ■ Combination of digital control equipment *For more details, please refer to the PDF document or feel free to contact us.