MSAファクトリー Product Lineup

The PCC-109 model programmable temperature controller is designed for heating applications that require temperature programming. It can be used simply by connecting the power supply to an outlet. (Wiring for temperature sensors and other components is installed at the back, and there are also front connectors and front terminal block types available.) It can be utilized in various scenarios, including soldering preheating, resin curing, drying processes, and as a control controller for precision heating processes.

• Thermometer
• Temperature and Humidity Control

The PCC-108 model programmable temperature controller is designed for heating applications that require temperature programming. It can be used simply by connecting the power supply to an outlet. (Wiring for temperature sensors and other components is installed at the back, and there are also front connectors and front terminal block types available.) It can be utilized in various situations, including soldering preheating, resin curing, drying processes, and as a control controller for precision heating processes.

• Thermometer
• Temperature and Humidity Control

The programmable temperature controller PCC-107A is a temperature controller designed for heating applications that require temperature programming. It can be used simply by connecting the power supply to an outlet. (Wiring for temperature sensors and other components is installed at the back. There are also front connector and front terminal block types available.) In addition to being useful for solder preheating, resin curing, and drying processes, it can be widely utilized as a control controller for precision heating processes.

• Thermometer
• Temperature and Humidity Control

The PC communication temperature controller PCC-100 CO type is a digital temperature controller with PC communication functionality. It can be used for long-term hot plate control, temperature data acquisition via a computer, as a simple data logger, and for controlling other precise heating processes. The temperature controller can be controlled from a computer, and the temperature data from the controller can be acquired by the computer.

• Thermometer
• Temperature and Humidity Control

The PCC-100 model digital temperature controller is a digital temperature controller specifically designed for hot plates. It is ideal for precise temperature control in heating processes and can be used in various situations such as semiconductor processes, evaluation systems, heating processes, preheating processes, and drying. Simply connect the power supply and use the dedicated cable (just connect it with a one-touch connector) to start using it immediately.

• Thermometer

For observing electronic components, small parts, etc., with an inclined microscope. Angle adjustment is as simple as turning the lorette screw. The base plate is heavy and stable. Additional options for enhanced load capacity, such as adding buckles!

• Inspection fixture

For observing electronic components, small parts, etc., with an inclined microscope. The angle adjustment is simply done by turning the rosette screw. It can stop at any angle from 0 to 90 degrees. The base plate is heavy and stable.

• Inspection fixture

For observing electronic components, small parts, etc., at an inclined angle with a microscope. The angle adjustment is simply done by turning the rosette screw. It can stop at any angle from 0 to 90 degrees. The base plate is heavy and stable.

• Inspection fixture

The maximum temperature is 600°C. It is equipped with a temperature monitoring function. The chamber is in a nitrogen atmosphere (refillable). The heating rate is 10°C/sec, and the temperature distribution is ±5%.

• Heating device

Customization is also possible to match various testing conditions! The maximum temperature is up to 700°C.

• Ceramic Heater
• Heating device

Please take this opportunity to try out the popular slim hot plate (model PH-121) that many people have inquired about☆

• Heating device

This is a high-temperature hot plate that can be widely used for production lines, research and development, and physical and chemical experiments. Various customizations are possible, including plate size, additional processing on the plate, cable length, and interfaces for device integration!

• Temperature and Humidity Control
• Heating device
• Casting Machine

We can produce "custom lids" and "custom clips" to fit various sizes, such as chip trays, starting from one piece! We can manufacture them in both plastic and metal!!

• tray

Please take this opportunity to try out the popular slim hot plate (model PH-121) that many people have inquired about☆

• Heating device

We would like to combine metal processing parts, weld them, and perform secondary processing after welding... Additionally, if you want to polish them for finishing, our company will handle the entire procurement on behalf of the customer. Please feel free to contact us for prototypes or if you want to produce just one part!

• Other laboratory equipment and containers
• Processing Contract

Addition of a simple hot stage for evaluation process stages, as well as for use under a microscope.

• Other heaters
• Heating device

The optical microscope is used for various purposes such as manufacturing, inspection, and evaluation in the production field. We provide stands suitable for these work applications. Depending on the purpose, there are various needs such as: ■ Wanting to create a larger workspace ■ Wanting to angle the microscope ■ Wanting to enable delicate movements ■ Wanting to rotate horizontally There are various objectives. We will respond to the needs of each customer accordingly.

• Microscope
• Analytical Equipment and Devices

This is a super compact angled stage. It has a simple structure and is low-cost. Additionally, various customizations are possible.

• Analytical Equipment and Devices
• Inspection fixture

Custom production of wire bond stages. We can accommodate production according to your company's needs, including size, temperature, clamp, and rotation functions.

• Other semiconductors
• Assembly Jig

This is a low-cost manual XY stage that can be customized for load capacity, stroke length, stage size, and more.

• Circuit board processing machine
• Power Transmission Equipment
• Other work tools

Air heating heater unit. By combining it with a temperature controller, non-contact heating can be easily achieved. It can be applied to a wide range of applications such as heating processes, drying, curing, and soldering. The setting temperature range, flow rate, and mounting angle can be customized according to each specification.

• Other semiconductor manufacturing equipment
• Other heaters

☆Customizable manual XYZ stage ・Stroke: approximately 50 to 300 ・Stage size: approximately 50x50 to 300x300 ・Stage material: aluminum, SUS, SS ・Stage surface treatment: anodizing, nickel plating, etc. ・Load capacity: 5 to 30 Kgf ・Additional processing on the stage: screw holes, holes, other mechanical interfaces ☆We also accept requests for electric drive compatibility.

• Other environmental analysis equipment
• Microscope
• Other processing machines

Size, mounting interface, mechanical shape, etc. can be customized. For semiconductor processes, nanotechnology processes, etc. ◎ Ultra-precise temperature control stage (±1℃, ±0.5℃) ◎ Vacuum suction chuck function ◎ High-precision stage (flatness) ◎ Temperature setting range 15-40℃.

• Heating device
• Cooling system
• Other environmental analysis equipment

It can be widely used in soldering processes, material evaluation, resin curing processes, and other processes that require temperature profiles.

• Other heaters
• Heating device
• Bonding Equipment

This is a super compact and thin hot plate with a built-in cartridge heater. It allows for a wide range of temperature settings with a separately sold temperature controller. It is suitable for the heating process of small components and semiconductor parts, as well as for evaluation stages such as temperature assessment.

• Other heaters
• Heating device
• Bonding Equipment

Research and development, material evaluation, heating processes, soldering, adhesive curing, preheating, and so on.

• Other heaters
• Heating device

For high-temperature heating engineering and process evaluation applications.

• Other heaters
• Heating device

We will achieve 【low prices and short delivery times】 through domestic processing. Production is possible from just one piece. With 【ultra-precision and fine processing】, we can meet your desired accuracy and shape.

• Other semiconductors

From resin and metal processing to precision sheet metal and ceramic products, we offer a variety of services. If you are having trouble selecting a processing partner, please feel free to contact us! We also accommodate additional processing requests!

• Other machine elements

We will manufacture cleaning fixtures using Teflon (fluororesin), which has excellent chemical resistance and heat resistance. We will design custom cleaning fixtures to accommodate circuit boards and wafer sizes that do not fit existing cleaning fixtures.

• Other cleaning machines
• Other semiconductors

We will manufacture cleaning fixtures using Teflon (fluororesin), which has excellent chemical resistance and heat resistance. We will design custom cleaning fixtures to accommodate circuit boards and wafer sizes that do not fit existing cleaning fixtures.

• Wafer
• Other cleaning machines

This is an easy-to-customize resin chip tray. Please contact us if you want to produce a variety of small-lot chip trays at a low cost for transportation and shipping!

• Plastic utensils and containers

We will custom-manufacture quartz glass cleaning jigs with excellent chemical resistance, starting from one piece. Please specify the work size and the solvent to be used for cleaning, and we will handle the design, estimation, and production. No drawings are necessary!

• Glassware and containers

In the heating process of semiconductor wafers, we will match the interface to the equipment you have as various evaluation tables.

• Other heaters
• Heating device

■ As a carrier tray jig for micro components ■ As a metal mask and deposition mask jig ■ Materials available include resin (PTFE, PEEK, polymer), glass (quartz), metal (stainless steel, aluminum), and alloys (Inconel, Kovar), among others. ■ We can manufacture according to your company's drawings or design based on specifications. We can accommodate either!

• Wafer

Addition of a simple hot stage for evaluation process stages, as well as for use under a microscope.

• Other heaters
• Heating device

Ideal for heating processes, various evaluations, and temperature tests. Customizable in size, maximum temperature, and heating rate.

• Other heaters
• Heating device

Addition of a simple hot stage for evaluation process stages, as well as for use under a microscope.

• Other heaters
• Heating device

Temperature, gas atmosphere, UV irradiation process, etc. ◎ For transportation ◎ For the purpose of improving material handling efficiency and quality ◎

• Stainless steel utensils and containers

■ Supports processes (temperature, gas atmosphere) that do not match specifications for resins. ■ Customizable shapes, dimensions, and precision for various applications such as semiconductor ICs, fine components, and electronic devices. ■ Capable of accommodating micro pocket sizes through precision and fine processing.

• Other cutting tools
• tray