ハギテック List of Products and Services

The "Fluororesin (PTFE) Ultra-Thin & Ultra-Fine Tube" equipped with unique characteristics is preferentially used in many advanced application products. Due to its low friction coefficient among polymers and a very wide operating temperature range, it is utilized in various products, from advanced medical devices to high-temperature industrial equipment. Additionally, it boasts excellent chemical resistance and chemical inertness, making it a popular choice as a plastic tube suitable for the chemical industry and analytical chemistry. 【Features】 ■ Excellent lubricity: Low friction coefficient among polymers ■ Chemical resistance (to all common solvents, acids, and bases) ■ Chemical inertness ■ Low extractability ■ Excellent insulating properties *For more details, please refer to the PDF document or feel free to contact us.

• tube

The product consists of a porous material made solely of polytetrafluoroethylene, demonstrating excellent flexibility and strong water repellency, while allowing air and gas to pass through. It is stable against all alkalis, acids, and solvents (except for some alkalis and molten metals), and contains no extractable impurities. Additionally, it is stable within a temperature range of -100°C to 260°C for heat and cold resistance. 【Features】 ■ Excellent flexibility and strong water repellency, allowing air and gas to pass through ■ Stable against all alkalis, acids, and solvents (except for some alkalis and molten metals) ■ No extractable impurities ■ Heat and cold resistance is stable within a temperature range of -100°C to 260°C *For more details, please refer to the PDF document or feel free to contact us.

• tube

At Hagi Tech, we handle "Fluororesin (PTFE) BT Tubes." They can be used from -40°C to 260°C, have excellent non-stick properties, and are easy to clean. They can withstand most chemical substances and allow for confirmation of the presence or absence of internal fluids. Additionally, they do not contaminate liquids, and due to their small bending radius, they are less likely to break or crush even when bent at sharp angles. 【Features】 ■ Small bending radius, less likely to break or crush even when bent at sharp angles ■ Confirmation of the presence or absence of internal fluids ■ Can withstand most chemical substances ■ Usable from -40°C to 260°C ■ Excellent non-stick properties and easy to clean *For more details, please refer to the PDF document or feel free to contact us.

• tube

Hagitech offers "Fluororesin (PTFE) Thick-Walled Tubes." The maximum operating temperature (for reference) is 260°C, and the standard length is 10m. Please use it when the operating pressure is high. 【Features】 ■ Use when the operating pressure is high ■ Maximum operating temperature (for reference): 260°C ■ Standard length: 10m *For more details, please refer to the PDF document or feel free to contact us.

• tube

Hagitech offers "Fluororesin (PTFE) AWG Tubes." The standard length is 10m, and the maximum operating temperature (for reference) is 260°C. It excels in heat resistance, non-stick properties, chemical resistance, and electrical insulation, and is used in a wide range of industrial fields. 【Features】 ■ Excellent heat resistance, non-stick properties, chemical resistance, and electrical insulation ■ Used in a wide range of industrial fields ■ Maximum operating temperature (for reference): 260°C ■ Standard length: 10m (please consult us for longer lengths) *For more details, please refer to the PDF document or feel free to contact us.

• tube

Hagitech offers "Fluororesin (PTFE) Tubes." The operating temperature range is -45 to 260°C. In various aspects such as electrical properties, weather resistance, heat resistance, chemical resistance, and non-stick properties, they are superior to other plastic tubes and are used in a wide range of industrial fields. 【Features】 ■ Operating temperature range: -45 to 260°C ■ Superior to other plastic tubes in various aspects such as electrical properties, weather resistance, heat resistance, chemical resistance, and non-stick properties ■ Used in a wide range of industrial fields *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is an ultra-fine polyimide tube with an inner diameter of φ0.1 to 2.18mm and a wall thickness of 0.013 to 0.203mm. It excels in mechanical, electrical, thermal, and chemical properties as well as chemical resistance, and is used in various fields, including the medical sector and general industry. Additionally, for medical applications, we offer PTFE-containing tubes to improve sliding properties, coil tubes to enhance flexibility, and blade tubes to increase wall thickness strength. 【Features】 ■ Complies with USP CLASS VI (various test data available) ■ Inner diameter φ0.1 to 2.18mm, wall thickness 0.013 to 0.203mm ■ Excellent mechanical, electrical, thermal, and chemical properties as well as chemical resistance ■ Used in various fields, including the medical sector and general industry ■ For medical applications, we also provide PTFE-containing tubes for improved sliding properties, coil tubes for enhanced flexibility, and blade tubes for increased wall thickness strength *For more details, please refer to the PDF document or feel free to contact us.

• tube

At HagiTech, we have developed a seamless polyimide tube through integral molding. It can withstand temperatures of 220°C for regular use and up to 400°C for short periods, and due to its thermosetting properties, it carbonizes at temperatures above 800°C. It features self-extinguishing properties that do not produce flames and does not emit toxic gases, ensuring excellent safety. Additionally, due to its special multi-layer structure, it is resistant to repeated impacts and bending, with no risk of peeling or tearing. It is safe for use in movable parts. 【Features】 ■ Heat resistance ■ Adhesion / Chemical resistance / Radiation resistance ■ Flexural resistance ■ Thin-walled ■ Workability *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "PEEK (Polyether Ether Ketone) thin-walled tube" has excellent heat resistance and can be continuously used at high temperatures (260°C). The levels of ion extraction and gas emission are very low, complying with Food Sanitation Law No. 370. It has excellent resistance to acids, alkalis, and radiation at high temperatures, allowing for continuous use in steam and hot water. 【Features】 ■ Ultra heat resistance: Continuous use at high temperatures (260°C) is possible; glass transition temperature (143°C) ■ Flame retardancy: UL standard VO (does not contain halogen compounds) ■ Steam resistance: Can be continuously used in steam and hot water ■ Excellent purity: Very low levels of ion extraction and gas emission ■ Chemical resistance: Excellent resistance to acids and alkalis at high temperatures *For more details, please refer to the PDF document or feel free to contact us.

• tube

At Hagi Tech, we process fluororesin and other tube and end processing. Fluororesin tubes are superior in chemical resistance, heat resistance, water repellency, and electrical insulation compared to other resins, and are widely used in fields such as analytical instruments, medical applications, semiconductors, and food. By processing these fluororesin tubes in various ways, we respond to a diverse range of needs. 【Features】 <Fluororesin Tube Processing & End Processing> ■ Bending processing reduces piping space as no joints are required. ■ It can secure flow and prevent liquid pooling that can occur when using joints. <Fluororesin Tube and Metal Pipe Assembly> ■ By combining the end processing technology of resin tubes with metal pipe processing technology, we provide new materials. ■ As composite materials that leverage the characteristics of each material, possibilities expand into a wide range of fields. *For more details, please refer to the PDF document or feel free to contact us.

• tube
• Processing Contract

At Hagitech, we offer plastic tubes, rubber tubes, and heat shrink tubes made from various materials, cut to your desired lengths. We can accommodate outer diameters from approximately 0.15mm to about 72mm, with high-precision cutting capabilities. We cater to a wide range of needs, from prototype lots to large-scale production. Please feel free to contact us when you need assistance. 【Features】 ■ High-precision cutting available ■ Accommodates outer diameters from approximately 0.15mm to about 72mm ■ Standard stock tubes can be provided quickly and in small lots ■ Contributes to reducing customer inventory, minimizing risks of stagnant inventory and disposal costs, and effectively utilizing inventory space * For more details, please refer to the PDF document or feel free to contact us.

• tube

At Hagi Tech, we manufacture custom tubes such as special sizes, various thermoplastic resin tubes, pipes, and rubber tubes. For general sizes and small diameters, there is basically no mold cost. Sizes can be specified in 0.1mm increments, allowing for high dimensional accuracy in production. We can also manufacture "HAGI custom tubes for industrial use" and "HAGI custom tubes for medical use," which are utilized in applications such as fiber optic protection, semiconductor devices, and scientific testing equipment. Please feel free to contact us when you need assistance. 【Features】 ■ Generally, there is no mold cost for standard sizes and small diameters. ■ High dimensional accuracy can be achieved in manufacturing. ■ Sizes can be specified in 0.1mm increments. *For more details, please refer to the related link page or feel free to contact us.

• tube

"H674-H2C" is a shielded heat shrink tube that excels in high-frequency EMI shielding performance. The operating temperature range is -55 to 135°C. It is flame-retardant and non-marking. Additionally, the standard color available is black. 【Features】 ■ Excellent high-frequency EMI shielding performance ■ Flame-retardant ■ Non-marking ■ Certification standards: UL224, MIL-L-DTL-23053/5 ■ Standard color: black *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "Hishi Tube VW (CE)" is a flame-retardant rigid polyvinyl chloride heat shrink tube. It has obtained UL-224 VW-1 standard certification (UL File No. E90727). Available colors include transparent, gray, and black. It can be used for the exterior of aluminum electrolytic capacitors, as well as for protecting electronic components and secondary batteries, and for insulation purposes. 【Features】 ■ Obtained UL-224 VW-1 standard certification (UL File No. E90727) ■ Available in transparent, gray, and black ■ Usable for protecting electronic components, secondary batteries, and for insulation *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "Hishi Tube IE (General Pipe)" is a soft heat shrink tube available in thick types (0.5 and 1.0 mm). By laminating, it can be produced in diameters ranging from φ250 mm to 2,000 mm. It becomes somewhat rigid after shrinking. It can be used for applications such as covering support poles, grip rods, handles, and rolls, as well as protective coverings for insulation materials of water supply and drainage pipes. 【Features】 ■ Material: Soft polyvinyl chloride ■ Available in thick types (0.5 and 1.0 mm) ■ Can be produced in diameters from φ250 mm to 2,000 mm ■ Usable for protective coverings of insulation materials for water supply and drainage pipes *For more details, please refer to the PDF document or feel free to contact us.

• tube

"Nishitube" is a heat shrink tube for insulation and protection of electric wires, pipes, and more. It has excellent mechanical strength, does not corrode when in contact with metals, and is effective for protecting pipes and preventing corrosion. Applications include protection of connection terminals for electric wires and cable wiring, covers for automotive parts and roller covers, covers for joints in sewer pipes, and non-slip grips for tools and leisure use, among various other fields. 【Features】 ■ Excellent mechanical strength ■ Does not corrode when in contact with metals ■ Effective for protection and corrosion prevention of pipes and similar items ■ Can be applied to movable parts ■ Lifespan of over 30 years even for outdoor use *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is a transparent type of silicone heat shrink rubber tube. Even after covering, the interior can be inspected, and the text on the surface of the covered object is readable, eliminating the need for marking. Like general silicone rubber, it has excellent heat and cold resistance, can be used over a wide temperature range of -50°C to +200°C, and also excels in weather resistance, chemical resistance, and electrical properties. 【Features】 ■ Transparent type ■ Interior can be inspected even after covering ■ Text on the surface of the covered object is readable ■ No need for marking ■ Usable over a wide temperature range of -50°C to +200°C *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is used in a wide range of applications, including heavy and light electrical equipment, transportation machinery, and home appliances, thanks to its excellent properties unique to silicone, such as heat and cold resistance, weather resistance, electrical characteristics, and chemical resistance. It is also used for masking various rolls and paints. When heated, the inner diameter shrinks to about half, and even after heating and shrinking, it retains the flexibility of silicone rubber and demonstrates strong resistance to aging. We offer fully custom-made production, accommodating special diameters, wall thicknesses, and colors. 【Features】 ■ The inner diameter shrinks to about half when heated ■ Retains the flexibility of silicone rubber even after heating and shrinking ■ Demonstrates strong resistance to aging ■ Fully custom-made production available for special diameters, wall thicknesses, and colors ■ Types with excellent oil and solvent resistance are also available *For more details, please refer to the PDF document or feel free to contact us.

• tube

"Kemflow (Corvex) TFE 2X" is a heat shrink tube that can shrink up to 1/2 its original size. Continuous use temperature: -170 to 260°C, length change rate: ±20% or less. It has excellent heat resistance, chemical resistance, and electrical insulation, and does not drip even at 327°C. [Features] ■ Shrinks up to 1/2 ■ Excellent heat resistance, chemical resistance, and electrical insulation ■ Does not drip even at 327°C *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is a two-layer structure heat shrink tube that combines PTFE on the outside and FEP on the inside. When heated, the low melting point FEP melts and completely adheres to the coated object due to the shrinkage force of the outer PTFE. Smaller sizes can shrink down to 0mm, allowing for the sealing of the ends. 【Features】 ■ Two-layer structure ■ When heated, the low melting point FEP melts and completely adheres to the coated object due to the shrinkage force of the outer PTFE ■ Smaller sizes can shrink down to 0mm ■ Color: Milky white *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is a heat shrink tube that suppresses the generation of static electricity, making it less likely to attract dust. It has a non-adhesive property, making it resistant to dirt. Since it is made from "PFA," it has excellent chemical resistance. Orders can be accepted for a minimum length of 400mm. For lengths of 400mm or more, it can be sold in 100mm increments. 【Features】 ■ Suppresses the generation of static electricity ■ Less likely to attract dust ■ Non-adhesive and resistant to dirt ■ Excellent chemical resistance due to PFA ■ Orders can be placed for a minimum of 400mm *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is a heat-resistant and cold-resistant FEP fluoropolymer heat shrink tubing. It is inert to most chemicals and solvents, has excellent weather resistance, and shows no aging changes. Most substances do not adhere easily, and even if they do, they can be easily removed. 【Features】 ■ Excellent heat and cold resistance ■ Continuous use temperature without load for FEP: -65℃ to +200℃ ■ Inert to most chemicals and solvents ■ Excellent weather resistance with no aging changes ■ Most substances do not adhere easily ■ Flame retardant *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is an ultra-thin tube with excellent lubricating properties and insulating characteristics. Operating temperature: -270°C to 260°C, with a length change rate of no more than 20%. The "PTFE," which has impact resistance and high insulation properties, creates various possibilities by leveraging its features. 【Features】 ■ Excellent lubricating properties with the lowest friction coefficient among polymers ■ Chemical resistance (to all common solvents, acids, and bases) ■ Chemically inert ■ Excellent insulating properties *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is a heat shrink tube made from high-performance processed polymer "PEEK," which boasts remarkable strength and excellent heat resistance along with outstanding radiation resistance. It is becoming popular as an alternative material to metals in application fields where lightweight properties are emphasized, such as aerospace. With excellent radiation resistance, it is also used for the insulation of wire cables. Additionally, it can be customized for coloring, and it is possible to incorporate radiation-shielding materials. 【Features】 ■ Excellent radiation resistance ■ Custom coloring available ■ Incorporation of radiation-shielding materials is possible ■ Provides high protection against wear, extreme temperatures, high pressure, and dielectric interference, forming a well-adhered coating *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is an extremely thin and precisely manufactured heat shrink tube made from tested materials (USP Class VI polyolefin) that possess excellent properties. Due to its thinness, when used as a covering material for metal flexible tubes, it achieves a metal flexible tube with an extremely thin covering structure. It is available in standard sizes with an inner diameter before shrinking ranging from 0.4mm to 9.2mm, and shrink ratios of 2:1 and 4:1 are offered. 【Features】 ■ Extremely thin and precise ■ High pressure resistance ■ Excellent moisture and water resistance ■ Available shrink ratios of 2:1 and 4:1 *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is a heat shrink tube with excellent properties made from tested materials (USP Class VI polyolefin). Sterilization is compatible with gamma radiation sterilization, electron beam sterilization, ETO, and autoclaving. It has high pressure resistance and excellent moisture and water resistance. Due to its ultra-thin nature, it can be used as a coating material for metal flexible tubes, enabling the realization of metal flexible tubes with an ultra-thin coating structure. 【Features】 ■ Compliant with USP Class VI ■ High pressure resistance and excellent moisture and water resistance ■ Sterilization compatible with gamma radiation, electron beam, ETO, and autoclaving ■ Made to order *For more details, please refer to the PDF document or feel free to contact us.

• tube

"H674-H2P" is a heat shrink tube with excellent transparency. It is resistant to gasoline, oil, and other substances, and has outstanding abrasion resistance. This product is suitable for covering wires and cables. 【Features】 ■ Excellent transparency ■ Resistant to gasoline, oil, and other substances ■ Outstanding abrasion resistance ■ Suitable for covering wires and cables ■ Non-marking product *For more details, please refer to the PDF document or feel free to contact us.

• tube

"H674-H2F" is a braided heat shrink tube made from polyolefin and polyester. It is halogen-free and has excellent flexibility and abrasion resistance. It is a non-marking product. 【Features】 ■ Braided type made from polyolefin and polyester ■ Excellent flexibility ■ Halogen-free ■ Excellent abrasion resistance ■ Non-marking product *For more details, please refer to the PDF document or feel free to contact us.

• tube

"H674-H2G" is a shrink tube with a glossy surface and excellent UV resistance. It has superior electrical performance and general chemical resistance. It is a non-marking product. Standard colors available are black, red, white, and transparent. 【Features】 ■ Glossy surface with excellent UV resistance ■ Superior electrical performance and general chemical resistance ■ Non-marking product *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "H674-H2 & H3" is a heat shrink tube that offers a wide variety of colors and sizes. It comes in 11 colors: black, brown, white, gray, transparent, blue, green, yellow, orange, red, and purple. Additionally, it is easy to shrink and highly versatile. It is flexible and generally resistant to solvents. 【Features】 - 11 color variations - Easy to shrink - Highly flexible and generally solvent-resistant - Non-marking product - Available in 1/2 shrink type (H674-H2) and 1/3 shrink type (H674-H3) *For more details, please refer to the PDF document or feel free to contact us.

• tube

"G5YG" is a shrink tube used for earth wire identification. It complies with UL/CSA standards and is highly flexible and weather-resistant. We offer a wide range of sizes. We also have a 1/3 shrink type available, so please inquire. 【Features】 ■ Complies with UL/CSA standards ■ For earth wire identification ■ Highly flexible and excellent weather resistance ■ Wide variety of sizes ■ 1/3 shrink type also available *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is compatible with all varieties of Nishitubes with a diameter of φ25 or more before shrinkage. It can be coated on objects with both ends sealed. The zipper part does not take up much space. When a resin zipper is attached to the "Nishitube NPE," the product name becomes "NPE-F." 【Features】 ■ Made to order ■ Standard length of 1m (can be produced in desired lengths from 0.3 to 2.5m) ■ Can cover objects with both ends sealed ■ Zipper part does not take up much space ■ In addition to resin zippers, standard zipper types can also be manufactured *For more details, please refer to the PDF document or feel free to contact us.

• tube

"Nishitube NUM" is a heat shrink tube that excels in abrasion resistance and flexibility. It has more than three times the abrasion resistance compared to standard products NPR and NPM. As it is a completely made-to-order product, please let us know your desired inner diameter before shrinkage, inner diameter after shrinkage, wall thickness, color, and quantity. 【Features】 ■ Completely made-to-order product ■ Excellent abrasion resistance and flexibility ■ More than three times the abrasion resistance compared to standard products NPR and NPM ■ Material: Urethane *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "DR" is a heat shrink tube made of flexible special elastomer, suitable for harness protection. It is resistant to diesel and mineral oils, making it ideal for harness protection in vehicles and vessels used in harsh environments, such as special vehicles. Additionally, it is flame-retardant. 【Features】 ■ Complies with MIL standards ■ Made of flexible special elastomer ■ Resistant to diesel and mineral oils ■ Suitable for harness protection in vehicles and vessels used in harsh environments, such as special vehicles ■ Flame-retardant *For more details, please refer to the PDF document or feel free to contact us.

• tube

"VITON" is a heat shrink tube made of high-temperature fluorinated elastomer that is resistant to high-temperature acids, organic solvents, lubricants, fuels, and more. It excels in abrasion resistance, cut resistance, high heat resistance, and flame retardancy. Additionally, it maintains flexibility at both low and high temperatures. 【Features】 ■ Complies with MIL standards ■ Excellent chemical properties ■ Stable against acids, solvents, and fuels ■ Flexible at low and high temperatures ■ Standard color: black (please inquire for other colors) *For more details, please refer to the PDF document or feel free to contact us.

• tube

The product consists of an outer layer of heat-shrinkable PTFE and an inner layer of FEP. It adheres perfectly to wires, cables, connectors, splices, terminals, etc., and excels in ease of handling, airtightness, and moisture resistance. When heated, the PTFE shrinks and tightly adheres to the coating, while the melted FEP blends into the solid or semi-solid outer tube, demonstrating exceptional durability against harsh loads such as tension and vibration. 【Features】 ■ The outer tube of PTFE is heated and shrunk to adhere tightly. ■ The inner layer of FEP melts and flows into the upper layer. ■ Excellent ease of handling, airtightness, and moisture resistance. ■ Equipped with outstanding electrical, chemical, and mechanical properties, capable of withstanding high temperatures of 232°C. ■ Custom colors can be produced upon order. *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is a high-temperature FEP heat shrink tube suitable for protecting areas that require chemical resistance, abrasion resistance, and heat resistance. It is resistant to most acids and solvents, except for strong alkaline solvents and high-temperature fluorine gases. Since it does not contain plasticizers or additives, it does not contaminate the liquids or gases it comes into contact with. Additionally, it has excellent insulation properties. 【Features】 - Suitable for protecting areas that require chemical resistance, abrasion resistance, and heat resistance - Resistant to most acids and solvents - Does not contain plasticizers or additives - Does not contaminate the liquids or gases it comes into contact with - Excellent insulation properties *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is a heat shrink tube that excels in heat resistance and chemical resistance, protecting coverings from dirt. It also has good electrical insulation properties, making it easy to insulate connectors and power cables. Long lengths can also be produced (up to about 50m, depending on size). Please consult us for thick-walled products, colored products, conductive types, etc. 【Features】 ■ Excellent heat resistance and chemical resistance ■ Protects coverings from dirt ■ Good electrical insulation properties ■ Facilitates electrical insulation of connectors and power cables ■ Can be easily shrunk with hot air *For more details, please refer to the PDF materials or feel free to contact us.

• tube

This product is a heat shrink tube that excels in heat resistance, cold resistance, and weather resistance. It is inert to most chemical solvents and has excellent flame resistance and electrical insulation properties, as well as a characteristic that makes it difficult for most substances to adhere. 【Features】 ■ Excellent heat resistance, cold resistance, and weather resistance ■ Inert to most chemical solvents ■ Excellent flame resistance and electrical insulation ■ Has a characteristic that makes it difficult for most substances to adhere *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is a PTFE large-diameter heat shrink tube with a shrinkage ratio of 1/2. In addition to excellent lubricity, it has chemical resistance to all common solvents, acids, and bases. We also offer a 1/4 shrinkage ratio type tube. 【Features】 ■ Excellent lubricity - lowest friction coefficient of polymers ■ Chemical resistance (to all common solvents, acids, and bases) ■ Chemically inert ■ Low extractability ■ Excellent insulating properties *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is a PTFE large-diameter heat shrink tube with a shrink ratio of 1/4. It has chemical resistance to all common solvents, acids, and bases. Furthermore, it possesses excellent insulating properties. We also offer a tube with a shrink ratio of 1/2. 【Features】 ■ Excellent lubricity - lowest friction coefficient among polymers ■ Chemical resistance (to all common solvents, acids, and bases) ■ Chemically inert ■ Low extractability ■ Excellent insulating properties *For more details, please refer to the PDF document or feel free to contact us.

• tube

"MT-LWA" is a medical shrink tube made from polyolefin material. It is suitable for use as a processing aid in areas that require dimensional accuracy, such as ultra-thin catheters. It has very high transparency and can accommodate thin wall thicknesses, making it suitable for delicate applications. 【Features】 ■ USP Class VI compliant ■ Medical-grade polyolefin material ■ Very high transparency ■ Capable of thin wall thickness *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "MT-2" is a tube that shrinks at low temperatures with a shrink ratio of 2:1. It excels in transparency and flexibility, and has good chemical solvent resistance. It also has excellent electrical insulation properties. It is compliant with USP Class VI and is suitable for γ/ETO sterilization environments. 【Features】 ■ Shrinks at low temperatures with a shrink ratio of 2:1 ■ Excellent transparency and flexibility ■ Good chemical solvent resistance ■ Compliant with USP Class VI ■ Suitable for γ/ETO sterilization environments *For more details, please refer to the PDF document or feel free to contact us.

• tube

"Pebax (nylon elastomer)" is a heat shrink tube with high flexibility. It excels in mechanical strength such as tear resistance, abrasion resistance, and pressure resistance, as well as insulation properties, and has excellent adhesion to metals. Additionally, custom specifications can be produced, including non-standard sizes, colored products, and hardness variations (durometer 40, 55, 63, and 72). 【Features】 ■ USP VI compliant ■ High flexibility ■ Usable for radiation sterilization ■ During shrink processing, the shrinkage rate in the length direction is minimal, resulting in excellent surface finish ■ Available inner diameters before shrinkage range from 0.36 to 6.35 mm *For more details, please refer to the PDF document or feel free to contact us.

• tube

"MTC" is a fluoropolymer shrink tube suitable for medical instruments and devices. It excels in abrasion resistance, heat resistance, flame retardance, chemical resistance, and electrical insulation. Additionally, it can be sterilized using gamma rays or ETO. The shrink start temperature is 125°C, and the complete shrink temperature is above 150°C. 【Features】 ■ Compliant with USP Class VI ■ Suitable for medical instruments and devices ■ Excellent abrasion resistance, heat resistance, flame retardance, chemical resistance, and electrical insulation ■ Can be sterilized with gamma rays or ETO ■ Standard colors: black, transparent (other colors available upon request) *For more details, please refer to the PDF document or feel free to contact us.

• tube