ハギテック List of Products and Services

This product is a flare-type "CTFE High-Pressure Mini Distribution Holder." After passing the tube through the nut, please flare the tube and tighten the nut onto the main body screw. The operating pressure should be 1.0 MPa or lower. However, for tube diameters of 4.0φ x 3.0φ, it should be 0.7 MPa or lower. 【Lineup】 ■612-2103-01 ■612-2103-02 ■612-2103-03 ■612-2103-04 ■612-2103-05 ■612-2103-06 *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• Piping Materials

The "Branch-kun & Branch Piping Unit" minimizes leaks with no connections or welding in the piping. By supplying it as a complete set of branch piping, it allows for reduced labor and cost savings. Since the number of connection points is minimized, the risk of leaks and running costs can be reduced. If you provide us with drawings or CAD diagrams, we will manufacture it, so please feel free to contact us. 【Features】 ■ 50% reduction in labor hours ■ Lightweight and compact ■ Approximately 30% reduction in fluid resistance ■ Elimination of leak troubles *For more details, please refer to the related link page or feel free to contact us.

• Piping Materials

" Ceramic coating" is a coating that uses fine ceramics as raw materials and employs sol-gel composite material technology. It has strong adhesion due to the chemical bonding with silica polymers generated by dehydration and shrinkage polymerization, preventing the progression of corrosion even when exposed to corrosive environments at the interface between the substrate and the coating film. Additionally, because it is tightly bonded to the substrate through chemical bonding, it does not experience delamination or blistering due to penetration like fluoropolymer coatings. 【Features】 ■ Heat resistance: Capable of withstanding high temperatures of 450°C ■ Wear resistance: Hard with a pencil hardness of 9H, resistant to scratching ■ Non-stick properties: Equivalent to fluoropolymer coatings (PTFE, PFA, etc.) ■ Steam resistance: Strong against steam, with excellent adhesion that makes delamination difficult ■ Thermal conductivity: Good thermal conductivity, further enhanced by far-infrared radiation ■ Safety: No harmful gas generation even when temperatures rise excessively *For more details, please refer to the related link page or feel free to contact us.

• Other surface treatment equipment
• Surface treatment contract service

The "Bridge Fluororesin Coating (FCXTRA Series)" is our unique technology that enhances wear resistance without compromising the properties of fluororesin coatings (Teflon coatings). Its durability is over 1,000 times greater than that of PTFE, which is known to have lower wear resistance compared to conventional materials. It is a non-filled PTFE with several times improved deformation resistance. It particularly excels in sliding parts, leveraging its low friction coefficient and low dust generation, making it suitable for use in sealing materials for pumps and compressors, as well as air valves. 【Features】 ■ Durability is over 1,000 times that of PTFE ■ Excels in sliding parts ■ Possesses high purity, heat resistance, and other characteristics ■ Contributes to various fields, including medical, semiconductor, and food industries *For more details, please refer to the related link page or feel free to contact us.

• Surface treatment contract service
• Other surface treatment equipment

We would like to introduce our "Fluororesin Coating (Teflon Coating)." The surface repels both water and oil, making it difficult for most substances to adhere, which results in low dirt accumulation. Additionally, it has a low coefficient of friction and is slippery, preventing stick-slip, and it does not dissolve in most chemical solutions. 【Features】 ■ Non-stick, water-repellent, release properties ■ Low friction, slippery, lubricating properties ■ Chemical resistance, corrosion resistance ■ Static electricity prevention *For more details, please refer to the related link page or feel free to contact us.

• Surface treatment contract service
• Other surface treatment equipment

We would like to introduce the lightweight "Strainer" made of resin. It allows for easy separation and removal of foreign objects and debris flowing through the piping. The upper part of the body is equipped with a fixing section, making it easy to install within the device. Additionally, by using a maintenance cup, it prevents liquid leakage during disconnection. 【Lineup】 ■ For 6mm tube - Bamboo shoot type ■ For 9mm tube - Bamboo shoot type ■ For 12mm tube - Bamboo shoot type ■ Male thread type *For more details, please refer to the related link page or feel free to contact us.

• Piping Materials

We would like to introduce the "Super Flexible Fluorine Tube - Clear Blue," which improves the issues of conventional multi-purpose and chemical-resistant hoses/Teflon tubes being hard and prone to breaking. Compared to standard fluorine single-layer tubes, it is less likely to break and has excellent abrasion resistance, making it suitable for slurry-like chemicals. It can be used for various applications, such as filling lines for fragrances, colorants, and additives, as well as transporting chemical waste from industrial waste. 【Features】 ■ The inner layer is ETFE-based and resistant to most chemicals ■ No liquid residue, excellent cleanability ■ Free of plasticizers (using non-oil materials) ■ Made from non-PVC materials ■ Suitable for food, beverage, and cosmetic applications *For more details, please refer to the related link page or feel free to contact us.

• tube

This product is a "super flexible fluorine soft tube" in a transparent color that makes it easy to see the cleanliness of the inner surface of the tube. The inner layer is made of ETFE, which is resistant to most chemicals, and it has the characteristic of being less prone to bending compared to standard fluorine single-layer tubes. It has excellent washability with no liquid residue and complies with the Food Sanitation Act and the standards for food and additives [Ministry of Health and Welfare Notification No. 370 of 1959]. 【Features】 ■ Chemical resistance ■ Flexibility ■ Resistant to bending ■ Non-stick *For more details, please refer to the related link page or feel free to contact us.

• tube

This product is an ultra-flexible fluorine tube that responds to the demand for "a soft fluorine tube capable of transporting UV ink and paint." The inner layer is made of ETFE, which is resistant to most chemicals, and it has the characteristic of being less prone to bending compared to regular fluorine single-layer tubes. Additionally, there are length markings printed on the tube at 1-meter intervals, making cutting easy. 【Features】 ■ Ultra-flexibility, UV cut, chemical resistance ■ Less prone to bending ■ Non-stick ■ Phthalate-free, non-PVC ■ High purity *For more details, please refer to the related link page or feel free to contact us.

• tube

The "PP Partition Coupling" features a coupling with 1/4-28UNF female threads on both inner ends and M12×1.75 male threads on the outer side for partition use. It can be fixed to partitions with a hole diameter of 12 to 13mm and a thickness of up to 13mm when combined with a PP lock nut (RU4N635). Made entirely of polypropylene, it can be sterilized using gamma rays or EOG. It is sold in bags containing 10 pieces. 【Features】 ■ Coupling with 1/4-28UNF female threads on both inner ends ■ M12×1.75 male threads on the outer side for partition use ■ Can be fixed to partitions with a hole diameter of 12 to 13mm and a thickness of up to 13mm ■ Made entirely of polypropylene, can be sterilized using gamma rays or EOG ■ Sold in bags containing 10 pieces *For more details, please refer to the related links or feel free to contact us.

• Sealing

This product is a connector for soft tubes such as silicone and Tygon. It is made entirely of polypropylene. It can be autoclave sterilized (at +121°C), but gamma ray and EOG sterilization are recommended. It is sold in bags containing 10 pieces, so please feel free to contact us when you need to order. 【Features】 ■ For soft tubes such as silicone and Tygon ■ Made entirely of polypropylene ■ Autoclave sterilization is possible, but gamma ray and EOG sterilization are recommended ■ Sold in bags containing 10 pieces *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

The "PP Flangeless Fitting" is specifically designed for fluoropolymer tubes and is used in combination with ferrules for connecting tube sizes. Attach the ferrule to the end of the tube and connect it to a 1/4-28UNF female flat bottom port along with the head nut. The tube connection pressure resistance is 0.8Mpa, and both the head nut and ferrule are made of all polypropylene (PP), making them capable of gamma ray and EOG sterilization. 【Features】 ■ Specifically for fluoropolymer tubes ■ Used in combination with ferrules for connecting tube sizes ■ Attach the ferrule to the end of the tube and connect it to a 1/4-28UNF female flat bottom port along with the head nut ■ Tube connection pressure resistance is 0.8Mpa ■ Sold in bags of 10 pieces *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

When organic solvents leak vapor indoors, it can lead to a deterioration of the laboratory environment, adverse effects due to changes in solvent composition, and increased costs due to solvent loss. The 'b.safe bottle cap' maintains airtightness with the included air valve while allowing outside air to enter and preventing vapor escape from the bottle. Additionally, the included air valve balances the negative pressure inside the bottle while preventing the inhalation of contaminants. 【Features】 ■ PFA Fitting: Excellent chemical resistance with PFA fitting ■ PPS Cap: Easy to grip and detach shape ■ PTFE Body: Excellent chemical resistance with PTFE body ■ Space for Writing/Labeling: Convenient for writing or labeling for reagent identification *For more details, please refer to the related links or feel free to contact us.

• Sealing

We would like to introduce our "Bora GL25 Screw Cap and Gasket." The all-PTFE version has high chemical resistance and is suitable for caps for storage bottles of various solvents, with a heat resistance of +200°C. The black polyphenylene sulfide version has mechanical strength and is available with a PTFE-lined silicone gasket and a PTFE membrane on the inside to enhance chemical resistance. The PTFE-lined silicone gasket not only increases the chemical resistance of the cap but also compensates for the unevenness of the bottle threads at the top, and can also be used as a septum membrane. 【Features of the All-PTFE Version】 ■ High chemical resistance ■ Suitable for caps for storage bottles of various solvents ■ Heat resistance of +200°C *For more details, please refer to the related links or feel free to contact us.

• Sealing

The "N Series" is a flow monitor that allows you to check the flow of liquids. It comes in three sizes to accommodate a wide range of tube sizes. Made of polycarbonate, it excels in durability and chemical resistance. Additionally, the blades are available in two colors, red and yellow, which enhances visibility compared to conventional flow monitors. 【Features】 ■ Allows you to check the flow of liquids ■ Made of polycarbonate, excellent in durability and chemical resistance ■ Improved pressure resistance compared to conventional flow monitors ■ Blades available in red and yellow ■ Three sizes available to fit a wide range of tube sizes *For more details, please refer to the related links or feel free to contact us.

• Flow Meter
• Other measurement, recording and measuring instruments

The "MP Foods X Inspection Band" is a tie band specifically designed for detection with X-ray inspection machines, using materials that can detect finer fragments. It is suitable for foreign object contamination measures in food factories that conduct foreign object inspections using X-ray machines. To reduce detection misses due to fragment size, the 150mm size is made with the same wide width as other sizes. Additionally, by using a dedicated cutter, the corners of the cut surface can be rounded off. 【Features】 - Specifically designed for detection with X-ray inspection machines, using materials that can detect finer fragments. - Suitable for foreign object contamination measures in food factories that conduct foreign object inspections using X-ray machines. - The 150mm size is made with the same wide width as other sizes to reduce detection misses due to fragment size. - The corners of the cut surface can be rounded off using a dedicated cutter. *For more details, please refer to the related links or feel free to contact us.

• Binding/Packing Machine

We would like to introduce our "PVC Punching Plate." The material used is PVC. We offer hole diameters of φ3mm and φ5mm. Since it is a PVC punching specification, it can be used as a grate in environments handling acids. 【Features】 ■ PVC punching specification ■ Can be used as a grate in environments handling acids ■ Material: PVC *For more details, please refer to the related links or feel free to contact us.

• filter

We would like to introduce our product, "Saran Filtration Fabric." "Saran" has a high flame retardancy and excellent chemical resistance. Due to its almost non-existent water absorption, this product has good drainage and cake release, making it easy to handle. 【Features】 ■ Saran - The material itself has high flame retardancy - Excellent chemical resistance ■ Almost no water absorption ■ Good drainage and cake release, easy to handle *For more details, please refer to the related links or feel free to contact us.

• filter

We would like to introduce our "Polyester Mesh." We offer opening rates from 1% to 64%. It is made of polyester, and the standard length is 30m. We have a lineup of mesh openings ranging from 1μm to 1950μm, so please feel free to contact us when you need assistance. 【Features】 ■Material: Polyester ■Standard Length: 30m (for longer lengths, please consult us) *For more details, please refer to the related links or feel free to contact us.

• filter

We would like to introduce our "Nylon Mesh." This product is a mesh that can be used for various purposes such as filtration and classification. It is sized at 200mm x 200mm and is made of nylon. We offer a range of openings from 1μm to 25μm, so please feel free to contact us when you need assistance. 【Features】 ■ Usable for various purposes such as filtration and classification ■ Material: Nylon ■ Size: 200mm x 200mm *For more details, please refer to the related links or feel free to contact us.

• filter

We would like to introduce our "Round Fluororesin Mesh (PFA)." We offer mesh counts ranging from 25 to 150. It is made of PFA and the size is φ100mm. We have packs of 10 sheets and 50 sheets available, so please feel free to contact us when you need them. 【Features】 ■Material: PFA ■Size: φ100mm ■Available in packs of 10 sheets and 50 sheets *For more details, please refer to the related links or feel free to contact us.

• Plastic utensils and containers
• filter

We would like to introduce our "Rubber Sheets (Rolls)" that we handle. Made from natural rubber. We offer thicknesses of 1mm, 2mm, 3mm, and 5mm. We have widths starting from 100mm, as well as 300mm, 500mm, and 1000mm available, so please feel free to contact us when you need assistance. 【Thickness】 ■ Width: 100mm/1000mm - 1mm, 2mm, 3mm ■ Width: 300mm/500mm - 1mm, 2mm, 3mm, 5mm *For more details, please refer to the related links or feel free to contact us.

• Rubber

We would like to introduce our "Sponge Rubber Sheets." The materials used include chloroprene rubber, nitrile rubber, natural rubber, styrene-butadiene rubber, and ethylene-propylene rubber. We offer three colors: black, gray, and white, so please feel free to contact us when you need them. 【Product Lineup (Excerpt)】 ■Chloroprene Rubber - CR-350 - CR-250 - CR-8° - CR-45° *For more details, please refer to the related links or feel free to contact us.

• Rubber

We would like to introduce our "NSD Marking Tube." This product is compliant with ROHS2 standards. It is compatible with various tube printers. We offer a wide variety of colors and sizes, including black, transparent, yellow, red, green, blue, gray, and brown. 【Features】 ■ Material: Soft PVC ■ Base color: White ■ Available sizes and colors: Black, transparent, yellow, red, green, blue, gray, brown ■ ROHS2 compliant ■ Compatible with various tube printers ■ A wide variety of colors and sizes available *For more details, please refer to the related links or feel free to contact us.

• Wiring materials

The "High Durability PVC Heat Shrink Tube" is a transparent and glossy vinyl guard that allows light to pass through well. It shrinks at low temperatures, making it easy to work with. Its thick walls make it resistant to scratches and friction, and it excels in physical, chemical, and electrical properties. It can be used in civil engineering (danger notification stakes and chains, construction machinery hose covers), as well as in general exterior applications, golf equipment, and playground equipment. 【Features】 ■ Transparent and glossy, allowing light to pass through well ■ Shrinks at low temperatures, making it easy to work with ■ Highly flexible and excellent transparency ■ Superior physical, chemical, and electrical properties ■ Thick walls make it resistant to scratches and friction *For more details, please refer to the related links or feel free to contact us.

• Wiring materials

The "BLW type" is a silicone bellows made of silicone rubber, with a heat resistance temperature of approximately 200°C, excelling in oil and heat resistance. By using a dedicated joint, multiple bellows can be connected. The hole in the center of the cap can be enlarged according to the application. Additionally, we can provide ethylene propylene rubber or nitrile rubber options in different materials upon request. 【Features】 ■ Used for linear motion devices and cable protection ■ Excellent oil and heat resistance due to silicone rubber ■ Heat resistance temperature is approximately 200°C ■ Multiple bellows can be connected using a dedicated joint *For more details, please refer to the related links or feel free to contact us.

• Wiring materials
• Other cable related products

The "T-14757 type" is a flexible, three-hole type one-touch grommet. The elastic thin film perfectly adheres to each of the three cables. It can be installed simply by pushing it in, and custom color changes are also possible. It is made from halogen-free materials and is available in three colors: black, light gray, and white. 【Features】 ■ Can be installed simply by pushing it in ■ Maintains high waterproof and dustproof performance even with three cables passing through ■ Custom color changes are possible ■ The elastic thin film perfectly adheres to each of the three cables *For more details, please refer to the related links or feel free to contact us.

• Wiring materials
• Other cable related products

The "SX type for sheet metal" is a wiring hole that can be installed simply by lightly pushing it into the hole. The operating temperature is -50°C to 60°C. The four tabs firmly hold the mounting surface, making it difficult to come off. Additionally, color changes are possible as a custom option. It prevents USB, LAN, VGA, HDMI cables, etc., from falling. 【Features】 ■ Prevents USB, LAN, VGA, HDMI cables, etc., from falling ■ Custom color changes available ■ Operating temperature: -50°C to 60°C ■ Equipped with a cable drop prevention feature ■ Easy to install and difficult to detach *For more details, please refer to the related links or feel free to contact us.

• Wiring materials
• Other cable related products

The "SF type" is a wiring hole cap that can be used even when the cover is removed from the main body. The operating temperature is -50°C to 60°C. By pinching the cable in the notch, it prevents falling and maintains the length of the cable coming out of the wiring hole. Custom color changes are also possible. 【Features】 ■ Prevents USB, LAN, VGA, HDMI cables, etc., from falling ■ Usable even when the cover is removed from the main body ■ Custom color changes are possible ■ Equipped with a cable fall prevention function ■ Operating temperature: -50°C to 60°C *For more details, please refer to the related links or feel free to contact us.

• Wiring materials
• Other cable related products

Introducing the "PTFE Glass Sheet" handled by Hagi Tech. This is a glass cloth impregnated with PTFE, with a heat resistance temperature range of -100 to 260°C. It has low friction properties for excellent sliding and is chemically resistant, allowing for semi-permanent use. Please feel free to contact us when you need assistance. 【Features】 ■ Non-stick, magic sheet ■ Glass cloth impregnated with PTFE, with a heat resistance temperature range of -100 to 260°C ■ Non-adhesive, so items do not stick ■ Low friction for excellent sliding ■ Chemically resistant for semi-permanent use *For more details, please refer to the related links or feel free to contact us.

• Other work tools
• Glass
• others

Introducing the "Electric Tube Cleaner" handled by Hagi Tech. This pipe cleaner powerfully removes deposits, water stains, rust, and more from inside pipes while rotating its end tools and brushes. By selecting a flexible shaft and end tools suitable for the diameter and bend radius of the piping, you can achieve tremendous effectiveness. 【Features】 ■ Powerfully removes deposits, water stains, rust, and more from inside pipes ■ Can be manufactured up to a maximum length of 30m ■ Regular cleaning significantly contributes to preventing a decrease in combustion efficiency and reducing fuel costs *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

At Hagi Tech, we handle fluororesin piping components. The "PTFE NPT stop socket" can be used as an end cap for tapered screws. The "PTFE NPT coupling" has female tapered threads on both sides, while the "PTFE NPT reducing coupling" features different diameters on the female tapered threads, making it convenient for diameter-changing connections. We also have other products available, so please feel free to contact us. 【Product Lineup】 ■ PTFE NPT nipple ■ PTFE NPT conversion bushing ■ PTFE NPT stop plug ■ PTFE NPT reducing coupling ■ PTFE NPT coupling ■ PTFE NPT stop socket *For more details, please refer to the related links or feel free to contact us.

• others
• Piping Materials
• Interior parts

At Hagi Tech, we handle resin marine cable penetration fittings. The PM type, while made of resin, excels in weather resistance and flame retardancy. We offer a lineup including "PM15," which is compatible with cables 6 to 11, as well as "PM20" and "PM25." We also have metal marine cable penetration fittings available. 【Materials】 ■ Clamp gland and body: PBT resin ■ Clamp nut: Iron ■ Leaf: Steel plate ■ Packing: CR *For more details, please refer to the related links or feel free to contact us.

• others
• Other work tools

Our company processes polyvinyl chloride (PVC) to manufacture products. We create products from rigid PVC sheets and rigid PVC pipes through various techniques such as cutting, bending, adhesive bonding, welding, and machining, tailored to customer requirements. Rigid PVC sheets include transparent PVC sheets, impact-resistant PVC sheets, heat-resistant PVC sheets, and perforated PVC sheets, which can be selected based on usage conditions. Additionally, we offer PVC angles and channels that can be used as auxiliary or reinforcement materials, enabling the production of stable quality products. 【Features】 ■ Products are manufactured according to customer requirements ■ Rigid PVC sheets can be selected based on usage conditions ■ Stable quality products can be produced by using auxiliary and reinforcement materials ■ Rigid PVC pipes can be selected based on usage conditions ■ We accommodate necessary quantities from prototypes and small lots of PVC processed products to mass production ■ Even without detailed drawings, we can provide estimates and production based on simple sketches *For more details, please refer to the related links or feel free to contact us.

• Processing Contract
• Contract manufacturing

At Hagitech, we handle "urethane round bars." We offer a wide range of sizes. We can also manufacture sizes and hardnesses not listed on our website. We can cut to your desired length, so please feel free to contact us when you need assistance. 【Features】 ■ Can be cut to your desired length ■ Can also manufacture sizes and hardnesses not listed on our website *For more details, please refer to the related links or feel free to contact us.

• others

Introducing the "Two-Way & Three-Way Stopcock" handled by Hagi Tech. The red body is made of polypropylene (PP), and the white plug is made of high-density polyethylene (HDPE) with a plug hole diameter equal to the inner diameter. There are protrusions on the back of the body center with two 4mm holes for fixed installation. We also offer PVDF two-way and three-way stopcocks for soft tubes such as silicone and Tygon, as well as PP inline two-way stopcocks. 【Features (PP + HDPE)】 ■ Protrusions on the back of the body center with two 4mm holes ■ Non-disassemblable ■ It is recommended to use tube bands to prevent the connection tube from falling off ■ Operating temperature range: 5 to 40°C *For more details, please refer to the related links or feel free to contact us.

• others
• Pipe Fittings

Introducing the "Operation Pendant Arm" handled by HagiTech. You can start using it immediately just by specifying the length of the arm, and the pendant is equipped with a locking handle function that allows it to be fixed in a designated position. The dedicated hanging rotary connector has a nickel-plated finish, and the arm and revolve are painted with polyurethane resin (undercoat and rust color). It cannot be removed even when wiped with thinner or similar substances. 【Features】 ■ Ready to use immediately by simply specifying the length of the arm ■ The pendant has a locking handle function that allows it to be fixed in a designated position ■ Both the pendant side and the revolve side of the arm have capped square holes for easy wiring ■ The revolve is equipped with rotation resistance adjustment and rotation angle adjustment functions *For more details, please refer to the related links or feel free to contact us.

• others
• Waterproof Connector

We have successfully developed a "polyimide film" with a thickness of 5μm, which is among the thinnest in the industry. This enables reduced rebound for EPC, as well as the lightweight, compact, and thin-film design of electronic devices. Due to its low thermal resistance, it is also suitable for heat dissipation tape. 【Features】 - Enables reduced rebound for EPC, lightweight, compact, and thin-film design of electronic devices - Low thermal resistance - Suitable for heat dissipation tape *For more details, please refer to the related links or feel free to contact us.

• plastic

The "PFA-HG Tube" is a PFA tube that utilizes NEW-PFA processed raw materials with low elution of fluoride ions, and controls the higher-order structure of PFA (micro-sizing of spherulites) to enable the smoothing of the inner surface of the tube. It is suitable for applications in the semiconductor and liquid crystal industries, where ultra-cleanliness is required. 【Features】 ■ The inner surface of the tube is smooth (Rt=0.2μm) - Reduces retention of particles and chemicals - Reduces cleanup (washing time) - Decreases the amount of chemical penetration due to reduced surface area inside the tube - Improves transparency - Enhances insulation resistance ■ Uses NEW-PFA processed raw materials - Reduces elution of fluoride ions - Improves stress crack resistance under stress environments *For more details, please refer to the related links or feel free to contact us.

• tube

We would like to introduce the "Ultra-thin Rubber Sheets (EPDM, CR, NBR)" handled by Hagi Tech. The sheets have a fabric texture on both sides, which can be expected to provide anti-slip effects and improve adhesion when applying double-sided tape. These rubber sheets are manufactured using the calendering method, ensuring stable dimensional accuracy. 【Features】 ■ Thickness: 0.2 to 0.5 mm ■ Manufactured using the calendering method ■ Rubber sheets with stable dimensional accuracy ■ Both sides of the sheet have a fabric texture ■ Expected effects include anti-slip properties and improved adhesion when applying double-sided tape *For more details, please refer to the related links or feel free to contact us.

• Rubber

We would like to introduce the "Plastic Conductive Clamp" handled by Hagi Tech. By using it in combination with conductive spirals and conductive fabric tape, more effective noise countermeasures can be achieved. It is highly flexible and easy to handle. 【Features】 ■ RoHS2 compliant ■ Highly flexible and easy to handle ■ Made of plastic, so it does not damage wires ■ Excellent flame retardancy, UL94 V-0 (base material) ■ Material: (base material) Polyolefin / (plating) Copper + Nickel *For more details, please refer to the related links or feel free to contact us.

• Vice Clamps

We would like to introduce the self-winding type "Shield Tube" handled by Hagi Tech. It is easy to install on branch points and harnesses with connectors. It has high flexibility and conformability, making it possible to install on sliding parts. It is halogen-free and excels in lightweight compared to shielded braided wires. Additionally, the included specialized installation tool allows for quick and easy attachment to cables by simply sliding it on. 【Features】 ■ RoHS2 compliant ■ Easy to install on branch points ■ Easy to install on harnesses with connectors ■ High flexibility and conformability, suitable for installation on sliding parts ■ Superior lightweight compared to shielded braided wires ■ Flame retardant: equivalent to UL94 VTM-0 *For more details, please refer to the related links or feel free to contact us.

• tube

We would like to introduce the "Conductive Spiral Tube" handled by Hagi Tech. It achieves both cable bundling and EMC measures. We offer a lineup including the "E06P006" for a reference compatible cable diameter of 6mm, as well as the 8mm "E06P008." 【Features】 ■ RoHS2 compliant ■ Achieves both cable bundling and EMC measures ■ Excellent flame retardancy, UL94 V-0 (base material) ■ Material: (base material) Polyolefin / (plating) Copper + Nickel *For more details, please refer to the related links or feel free to contact us.

• tube

We would like to introduce the "Ultra-thin Fluorine Rubber Sheet" with a thickness of 0.3mm, handled by Hagi Tech. It excels in oil resistance, ozone resistance, and weather resistance, and its mechanical properties are also favorable compared to other rubbers. It is flame-retardant and can be utilized in various applications. 【Features】 ■ Excellent heat resistance, chemical resistance, oil resistance, ozone resistance, and weather resistance ■ Mechanical properties are also favorable compared to other rubbers ■ Flame-retardant and can be utilized in various applications ■ Can be fed into automatic punching lines *For more details, please refer to the related links or feel free to contact us.

• Rubber

The "Pendant Armor" is a pendant cover designed to prevent damage from drops and interference. We offer various variations tailored to different terminals from robot manufacturers. Simply cover the teaching pendant you are using to protect the pendant, screen, cables, and more, minimizing the risk of decreased productivity. 【Features】 ■ Shock-absorbing material ■ Lightweight design ■ Easy fit by just covering ■ Various variations available *For more details, please check the related links or feel free to contact us.

• Other safety and hygiene products
• others
• Work tools