流機エンジニアリング List of Products and Services

We offer a "slide-roof tent" that can secure a vast space of up to 34m in width and 25m in height, with no restrictions on depth expansion. By using existing framework scaffolding, we maintain the tent's characteristic wide internal space without the need for center poles, allowing for installation at a lower cost and in a shorter time compared to typical freestanding (integrated) tents. If scaffolding has already been installed for demolition work, the roof installation can be completed alone, further reducing costs and installation time. 【Features】 ■ Low cost and quick installation ■ Space-saving assembly work ■ Stable project progress ■ Design and construction methods that enhance safety *For more details, please download the PDF or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation
• Incinerators and incinerators

2026年度から、PFASの水道水基準が正式に強化される見通しです。 企業や自治体には、排水や地下水のPFAS対策が急務となりつつあります。 本資料では、PFASの基礎から国内外の規制動向、除去技術の比較、 そして当社独自の処理技術「ECOクリーンLFP」の仕組みや導入事例まで、 実務的なポイントを中心にわかりやすく解説しています。 ECOクリーンLFPは、粉末活性炭と専用フィルターを使った独自技術。 短鎖PFASへの対応、廃棄物・CO2削減、コスト面の課題までカバーします。 【本資料でわかること】 ■PFASの定義と、国ごとの最新規制動向 ■PFAS除去技術の種類と特性比較 ■ECOクリーンLFPによる処理の仕組みと導入事例 ■導入検討時のポイントと進め方 ＼ 資料は「PDFダウンロード」をクリックしてご覧ください ／

• Water treatment equipment

If you have concerns about PFAS treatment, please feel free to consult us. ■ Considering measures for PFAS (PFOS, PFOA) in leachate from disposal sites ■ Urgent response to PFAS regulations is needed ■ Facing challenges with costs and waste volume in treating high-concentration PFAS ■ Feeling the operational burden and limitations of existing activated carbon treatment ■ Wanting total support from analysis to treatment and disposal ECO Clean LFP is a PFAS treatment technology that combines "high removal performance," "automation," and "low environmental impact." By automatically attaching and detaching powdered activated carbon to a unique filter, it enables efficient and sustainable treatment compared to conventional methods. <Case Study> ECO Clean LFP adopted as a PFAS purification device by a domestic manufacturer for the first time Since April 2023, we have quickly started operating PFAS purification devices in Okinawa Prefecture, providing consistent support from water quality analysis to device design and operation. ECO Clean LFP contributes to PFAS measures in real environments. 【This device will be exhibited at the 2025 New Environmental Exhibition】 Please see below for details. ＼ We have detailed case materials available. Please download and take a look ／

• Water treatment equipment

The "Tunnel Cooler" is a product that reduces the risks of heatstroke, providing a comfortable working environment and improving work efficiency. Each unit is modular, allowing for centralized management via a control panel, making operation exceptionally easy with a simple ON/OFF switch. We will propose appropriate specifications and combinations based on ventilation equipment and required specifications. 【Features】 ■ Protects the safety of workers ■ Simple operability ■ Flexible combinations *For more details, please download the PDF or feel free to contact us.

• Cooling system

If you have concerns about PFAS treatment, please feel free to consult with us. ■ Considering the treatment of PFAS (PFOS, PFOA) residuals in facilities ■ Troubled by PFAS-containing foam fire extinguishing agents that remain in the equipment from past use ■ Want to remove known quantities on-site and complete treatment in a short period with temporary equipment ■ Struggling with the disposal costs of PFAS-containing water ■ Seeking total support from PFAS analysis to disposal treatment ECO Clean LFP's technology employs a unique filter and powdered activated carbon to achieve effective treatment at low cost while minimizing environmental impact. It resolves the challenges of traditional activated carbon treatment, including "difficulty in handling," "high disposal costs," and "low removal effectiveness." <Case Study> Purification of PFAS underground pit water from foam extinguishing equipment | Defense-related facility 【Target】 PFAS (PFOS/PFOA) contained in a tank with a volume of 187㎥, to be implemented in fall 2024 【Treatment Result】 Raw water concentration reduced from 460 ng/L to "not detected" (below 1 ng/L) 【Installed Equipment】 ECO Clean LFP PFAS purification unit rental ＼ Detailed case study materials are available. Please download and take a look! ／

• Water treatment equipment

"Flow Machine Water Treatment Engineering" solves such challenges! 1) Complex wastewater treatment We integrate our unique technology with the specialized skills of our partner companies. We provide comprehensive proposals for equipment and plant facilities. 2) Labor-saving and cost reduction Automation of each device contributes to labor-saving and cost reduction in operations. 3) Reduction of industrial waste We minimize waste volume, promote effective resource utilization, and facilitate CO2 reduction. 4) PFAS treatment and purification PFAS, an organic fluorine compound, is becoming a social issue. We achieve safe treatment and purification with our unique adsorption filtration technology. ------------------------------ Plastic waste, PFAS, livestock wastewater, industrial waste treatment, food factories, ceramics, semiconductors, rubber release agents, testing liquids, etc. ------------------------------ If you are facing difficulties that cannot be addressed with off-the-shelf products, if your existing facilities can no longer meet environmental standards, or if you have been turned away by other companies, please leave it to Flow Machine Engineering. We will accurately respond to your needs based on our achievements in various fields. [Leave difficult challenges to us through hearings, investigations, and development] We provide consistent support from sample analysis and hearings to ongoing field tests and product customization!

• Water treatment equipment

PFAS is a collective term for over 10,000 types of organic fluorine compounds. They are widely used in our daily lives, such as in non-stick coatings for frying pans and foam fire extinguishers, but there are concerns about their carcinogenic risks, and due to their resistance to decomposition, they are regarded as "forever chemicals." The technology of ECO Clean LFP employs a unique filter and powdered activated carbon, achieving effective treatment at low cost while minimizing environmental impact. It addresses the challenges of traditional activated carbon treatment, such as "difficulty in handling," "high disposal costs," and "low removal effectiveness." Furthermore, this technology has been adopted in the Ministry of the Environment's "Demonstration Research" for the fiscal year 2023, and its effectiveness has been confirmed in the purification of actual PFAS-contaminated groundwater. This document provides a clear explanation of regulations and purification technologies related to PFAS! [Contents of the document] ■ Latest trends in PFAS regulations overseas ■ Results of PFAS purification technologies and the Ministry of the Environment's demonstration research ■ Corporate PFAS environmental management roadmap ＼ Please click "PDF Download" to view the document ／

• Water treatment equipment

Are you struggling with dust control measures during the transportation of raw materials and resources in biomass power generation? ＼ If you have any of the following issues, please consult us ／ - We want to effectively collect dust generated at the transfer points of the conveyor belt to improve the working environment. - We want to collect dust generated during fuel transportation to reduce losses. - The performance of dust collection with existing equipment is insufficient, and we want to introduce higher-performance equipment. - Since the properties of the dust vary, we want to confirm the appropriate air volume and performance before considering implementation. - We want to implement measures against explosive dust to ensure a safe working environment. 【Case Study】Dust Collection for Wood Fuel at Biomass Power Plant Issues: - A large amount of wood dust is generated during the transportation to the indoor biomass fuel storage. - The scattering of raw materials leads to energy loss. - The properties of the raw materials vary depending on the production area, resulting in different qualities of dust. - There is a risk of dust explosion. Solution: - By installing a dust collector with measures against explosive dust, we improved the working environment by reducing dust exposure and visibility issues. - The collected wood dust is reused as fuel. - We are establishing a permanent solution while verifying the appropriate air volume and filter performance through temporary installation. We cater to both temporary and permanent needs. Please feel free to contact us!

• Dust collector

PFAS is a collective term for over 10,000 types of organic fluorine compounds, commonly used in items such as frying pan coatings and fire extinguishing agents. These substances raise concerns about cancer risk and are referred to as "forever chemicals" due to their difficulty in breaking down, leading to significant issues. Since April 2023, our company has been operating PFAS purification systems in Okinawa Prefecture, consistently working on everything from water quality analysis to equipment design and operation. The technology of ECO Clean LFP achieves effective treatment at low cost and with low environmental impact by utilizing a unique filter and powdered activated carbon. It addresses the challenges of traditional activated carbon treatment, such as "difficulty in handling," "high disposal costs," and "low removal effectiveness." This document provides a clear explanation of methods for treating PFAS and other related topics. 【Contents】 ■ What is PFAS ■ Methods for treating PFAS and key points for adoption ■ Introduction of PFAS purification systems and case studies ＼ Please click "PDF Download" to view the document ／

• Water treatment equipment

Simple Deodorization Device PC-20HFC (Available for both rental and sale) A simple deodorization device that combines a fan with an activated carbon filter! For odor and VOC countermeasures. Despite its compact size, it has a capacity of up to 25㎥/min and can be easily installed with casters. 【Case Study】 Site: Deodorization measures during floor replacement work in the vehicle interior Used for deodorizing solvents, adhesives, etc., during floor replacement work in the vehicle interior. Installed Device: PC-20HFC × 4 units (rental) Results: Compared to the previously used products from other companies, the deodorization effect per unit was higher, allowing for effective odor control with fewer units. Additionally, the improved working environment led to increased work efficiency and reduced construction time. --------------------- Ryuki Engineering offers solutions for individual odor issues, addressing high concentrations and complex environments that existing products cannot handle, while also reducing maintenance costs! We can accommodate combinations of devices ranging from small (50kg) to large capacity (1㎥ to a maximum of 10㎥) with an activated carbon filling amount of up to 5 tons, available for both rental and sale tailored to the site.

• Dust collector

【Adoption of Purification Water Treatment for Contaminated Water at Okinawa Prefecture's Yusui Park】 "ECO Clean LFP" has been adopted as a purification device for organic fluorine compounds (PFAS) by a domestic manufacturer for the first time. Preliminary tests confirmed that the concentration of PFOA in groundwater at 100,000 ng/L could be reduced to 2.5 ng/L (measured removal rate of 99.997%) in just 10 seconds of filtration. 【PFOS and PFHxS are below the quantification limit, and over 99.9% removal of PFOA has been achieved!】 ECO Clean LFP is a new water treatment technology that attaches functional powder to a unique pleated filter, adsorbing and removing dissolved substances such as PFAS (PFOS/PFOA/PFHxS), BOD, COD, TOC, color, odor, harmful substances, and VOCs. Benefits of 'ECO Clean LFP' Pleated Filter + Powdered Activated Carbon - Adsorption capacity is 100,000 times greater compared to pellet filling methods - Activated carbon consumption is reduced to 1/10 compared to granular activated carbon - Separates harmful substances from wastewater → solidifies and significantly reduces disposal costs *For more details, please download and view the catalog.

• Water treatment equipment

Various odors emitted from factories. VOCs (volatile organic compounds) contained in organic solvents such as paints, adhesives, and cleaning agents can have harmful effects on the human body, necessitating countermeasures. Improving the working environment can also lead to increased productivity. It may enhance work efficiency and reduce labor costs. Ryuki Engineering offers tailored solutions for odor issues that cannot be addressed by existing products, focusing on high concentrations and complex environments, as well as reducing maintenance costs! 【We address odors in all types of workplaces】 - Odors generated during renovation and blasting work - Odors from adhesives and chemicals during floor replacement work - Dust and odors from waste plastics - VOC countermeasures - Please feel free to consult us about odor components.

• Ventilation and Exhaust

The disaster debris mixed soil separation system "DIMS" is a system that can recycle mixed waste, which is the biggest obstacle to disaster recovery, by separating soil, combustible materials, non-combustible materials, and metal fragments as renewable resources. It is composed of multiple types of equipment centered around an inclined apron conveyor, roll screens, pressure screens (Power Grind Screens), and combustible separators, making it effective for soil separation. 【Total Support from Proposal to Execution for Disaster Soil Processing】 Our company provides total support for building systems tailored to disaster soil processing sites, from proposal to execution. Utilizing our mobile disaster processing plants, we collaborate with local governments and businesses to achieve rapid disaster recovery efforts. It is also possible to bring demo units to the site for performance verification and conduct test separations. For inquiries regarding emergencies or demo units, please contact us directly.

• Other environmental equipment

From April 1, 2021, "welding fumes" generated during metal arc welding and similar operations have been designated as specific chemical substances (Category 2 substances), and work management has been strengthened. To comply with the legal amendments, appropriate work environment management, including measures to prevent fume exposure, is essential. However, there may be some who are unsure of where to start. Our company offers total support from proposals to aftercare, so please feel free to consult with us first. 【Our Strengths】 ★ Adoption of our unique pleated filter achieves high cleanliness and space-saving. ★ The automatic regeneration system eliminates the need for filter replacement, significantly reducing replacement costs and labor costs, thus greatly lowering running costs! ★ With the know-how cultivated through our manufacturer rental business and environmental solution engineering, we can provide consistent support. ★ Before implementation, practical tests can be conducted using rental machines. Being able to confirm performance and effectiveness in advance is one of our major features. ★ We also have a track record of technical awards! Our industrial dust collector "I Series" received the 45th Excellent Environmental Equipment Award, winning the "Director-General of the Industrial Technology and Environment Bureau, Ministry of Economy, Trade and Industry" award!

• Other environmental equipment
• Industrial Vacuum Cleaners
• Dust collector

Recently, "PFAS," which has been pointed out as harmful to the human body, has been gaining attention, with the first expert meeting held by the Ministry of the Environment in January 2023. ECO Clean LFP is a new water treatment technology that adsorbs and removes dissolved substances such as PFAS (PFOS/PFOA/PFHxS, etc.), BOD, COD, TOC, color, odor, harmful substances, and VOCs by attaching functional powders to a unique pleated filter. The foundational technology "ECO Clean" has received the 46th Invention Award and the 46th Excellent Environmental Equipment Award! Features of 'ECO Clean LFP': - Adsorption capacity 100,000 times greater compared to pellet filling method (contact area × flow rate) - Adsorbs and removes PFAS, BOD, COD, TOC, color, odor, harmful substances, and VOCs by attaching functional powders to a unique pleated filter - Compared to granular activated carbon, the consumption of activated carbon is reduced to 1/10, significantly reducing activated carbon waste - Separates harmful substances from waste liquid → solidifies, greatly reducing costs Main applications: Recycling and reuse of factory water and cleaning water, groundwater purification, wastewater recycling, and removal of organic substances and organic solvents such as PFAS, BOD, COD, and other refractory substances.

• Water treatment equipment
• Filtration Equipment
• Wastewater/wastewater treatment equipment

In recent years, there has been significant damage and threats caused by the increasing number of "large typhoons." Amid frequent abnormal weather due to climate change, awareness of safety measures among companies and users is rising. Our large blowers can reproduce winds of up to 80 m/s. Since the tests are conducted outdoors, it is not a problem if the test specimens are damaged. They are utilized for various purposes, including product wind resistance testing and employee safety training. 【If you have any of the following challenges, please consult us】 - I want to investigate the wind resistance performance of our products. - I want to recreate a typhoon or strong wind environment for employee safety training. - I want our customers to understand the dangers of large typhoons. - I want to conduct tests on products or testing methods that cannot be accommodated by wind tunnel tests. ----------------------------------------- 【Case Study Video】 Meiden Corporation Implementation Details: As part of employee safety training, participants experienced working in a strong wind environment. 23 young employees participated, and a live broadcast was conducted to various domestic and international offices. Implementation Method: Conducted at the Tsukuba Tech Center.

• Weather resistance test

Our company is an engineering manufacturer that proposes solutions tailored to customer needs for various environmental challenges, including wastewater, dust, VOCs (volatile organic compounds) gases, and contaminated soil. Based on our unique technology of pleated filters, we develop unique devices that utilize techniques for adsorption, separation, and removal, targeting all types of fluids such as gases, liquids, and powders, aiming to contribute to the environment. Leveraging our track record in environmental improvement projects, we provide comprehensive support from planning to design, manufacturing, installation, and after-sales support for companies looking to establish various plants, including manufacturing processes, waste treatment, and recycling. If you have concerns such as: - Measures to prevent dust and odor from dispersing into the surrounding environment of the plant - Worries about costs and environmental impact related to wastewater - The need to ensure the safety and health of workers please feel free to consult with us! ＼Our Contributing Technologies／ - Waste plastic washing water regeneration technology - Alkaline washing water regeneration - Waste plastic transportation technology - Dust collection measures - Odor control (measures against ammonia and aldehyde odors are also possible) - Cooling water production - Powder transportation (material handling) - Composite processes including crushing and sorting etc…

• Dust collector
• Wastewater/wastewater treatment equipment
• Ventilation and Exhaust

Introduction of Installation Examples Air Shower: AS-1 / AS-2 [Applications] Various construction works / Dust and explosion prevention measures for workers [Customer's Challenge] To remove dust adhered to the work clothes of workers. [What Was Achieved] Efficiently removed dust and other particles adhered to workers at a jet airspeed of 30 m/s without scattering, thereby suppressing secondary dust dispersion. *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment
• Air Shower

Introduction of Installation Examples Mist Fan: FA-COOL [Application] Crushing Operations / Dust Control [Customer's Challenge] We want to implement dust control in areas that cannot be sealed or placed under negative pressure. [What Was Achieved] By using a large volume of fine mist, we prevented dust dispersion by solidifying it. *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment
• Hazardous material processing

Introduction of Installation Examples Dust Collector: CPH-1800 x 3 units [Application] Periodic repair work for coal boilers Measures against blast dust and welding fumes [Customer's Challenge] During the thermal spraying work inside the coal-fired power plant's boiler, they wanted to implement measures against fumes and also reduce the construction time. [What Was Achieved] By connecting ducts to the inside of the boiler with three large dust collectors, we improved the working environment by collecting blast dust and thermal spraying fumes with a large airflow, and also achieved a reduction in the process time. *For more details, please refer to the PDF materials or feel free to contact us.

• Other environmental equipment
• Dust collector

Introduction of Installation Examples Dust Collector: CF-150 [Application] Turbine Regular Maintenance Work / Blast Dust Countermeasures [Customer's Challenge] To address dust generated during turbine blasting work at a coal-fired power plant and to prevent it from spilling outside the work area. [What Was Achieved] By sealing the work area and maintaining negative pressure, dust was collected, improving the environment for workers and preventing dust from escaping to the outside. *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment
• Dust collector

Introduction of Installation Examples Mobile Air Conditioner: MA-56 x 4 units Blower: RE-40IW5.5 x 2 units [Application] Regular maintenance work for steam turbine boilers / Dehumidification measures inside the boiler Customer's Challenge During the regular maintenance work of the steam turbine, they wanted to prevent condensation inside the boiler and avoid rust formation. [What was Achieved] By managing the temperature and humidity of the outside air, inside the boiler, and various locations within the factory for dehumidification, rust formation was prevented. *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and Exhaust
• Cooling system
• Dehumidifier

Introduction of Installation Examples Dust Collector: BH-100 + 1㎥ Activated Carbon Adsorption Tower [Application] Hydroelectric power generation, electric motor dismantling and repair work Blast and thermal spray fume and VOC countermeasures [Customer's Challenge] Dust control measures for blasting and thermal spraying during regular repairs related to water turbines at the hydroelectric power plant, as well as VOC countermeasures due to organic solvents during painting. [What Was Achieved] The work area was enclosed and sealed, dust and fumes from blasting were collected, and activated carbon with good adsorption properties was selected from the components of volatile organic compounds. Environmental improvement was achieved through dust collection and deodorization. *We can handle all types of VOCs. For more details, please contact us. For more information, please refer to the PDF document or feel free to contact us.

• Other environmental equipment
• Dust collector

Introduction of Installation Examples Vacuum Cleaner: VacuMAX30 [Application] New shipbuilding construction Dust control during blast cleaning material recovery and finishing work [Customer's Challenges] During blast work inside the new ship, 1. They wanted to recover the blast material for reuse. 2. They wanted to clean the work area. [What Was Achieved] 1. The blast material was vacuumed and packed into a bulk bag for reuse. 2. Vacuum suction enabled quick cleaning of the work area. *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment
• Industrial Vacuum Cleaners
• Dust collector

Introduction of Installation Examples Dust Collector: CF-300 [Application] Regular repair work on cement production line / Dust control [Customer's Challenge] During regular repair work on the cement production line, a large amount of dust was escaping from the work area, posing a risk of exposure. Therefore, it was necessary to improve the environment and ensure the safety of the workers. [What Was Achieved] By sealing the work area and creating negative pressure, dust was collected, improving the environment for workers and preventing dust from escaping to the outside. *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment
• Dust collector

Introduction of Installation Examples Mobile Air Conditioner: MA-56 [Application] Heat stroke prevention for workers during operations [Customer's Challenge] We want to implement heat stroke prevention measures in the work area. [What We Achieved] By conducting a local survey of the area, we understood and planned the appropriate air volume, and by blowing cool air into the work area, we prevented heat stroke among workers. *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment
• Cooling system
• Dehumidifier

Introduction of Installation Examples Dust Collector: CPH-3000 [Application] Coke Oven Demolition Work Measures to Prevent the Leakage of Asbestos-Containing Materials [Customer's Challenge] To manage negative pressure during the coke oven demolition work and prevent the scattering and leakage of asbestos-containing dust generated. [What Was Achieved] By using one of the largest dust collectors in the country, we maintained negative pressure in a large-capacity space, preventing the leakage of asbestos and improving the working environment. *We can handle all matters related to asbestos and dioxins. For more details, please contact us. *For more information, please refer to the PDF materials or feel free to contact us.

• Other environmental equipment
• Dust collector

Introduction of Installation Examples: Dust Collector: CPH-2400 【Application】 Regular maintenance work for holding furnaces / Fume countermeasures in lance operations 【Customer's Challenge】 During regular maintenance of the holding furnace at the steelworks, we want to continue operations in other areas. Additionally, we want to ensure the safety of workers and implement fume countermeasures. 【What We Achieved】 By using a large dust collector inside the holding furnace, we were able to implement fume countermeasures during lance work, allowing operations in a negative pressure area. We also ensured visibility for workers and prevented dust from scattering outside. ＝＝＝ Large ventilation equipment rental available for regular maintenance at steelworks and similar facilities! If you have such inquiries, please feel free to contact us! - We want to rent only for the duration of regular repairs or renovations. - We want to continue operations in other areas during the rental period. - We want to ensure worker safety and implement fume countermeasures. - Horizontal transport to other operations and equipment within the same facility is also possible! - After trial use through rental, transitioning to permanent installation is also possible! *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment
• Dust collector

Introduction of Installation Examples Blower: RE-110IW55-4 (Large Axial Flow Fan) [Application] Regular inspection and repair work for LD gas holders Leak check, pressure resistance, and float check measures [Customer's Challenge] In regular repair work for LD gas holders, the customer wants to perform ventilation, internal cleaning, airtightness testing, and lid level adjustment during air aging within the area. [What Was Achieved] By selecting the necessary pressure and airflow during lid ascent and utilizing the lid as a working surface while adjusting the level, we achieved an increase in the efficiency of the above tasks. *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and Exhaust
• Other environmental equipment

Our company will exhibit at the "International Powder Technology Exhibition Tokyo 2022," which will be held at Tokyo Big Sight from December 7 (Wednesday) to December 9 (Friday), 2022. This exhibition is a comprehensive showcase of the latest information on powder technology, focusing on powder equipment and devices. As an environmental solutions and engineering manufacturer, we will display water treatment equipment, including "filtration devices," and we will also unveil new products.

• Wastewater/wastewater treatment equipment
• Water treatment equipment
• Other water treatment equipment

**Features** - Achieves a balance between processing air volume and cleanliness, addressing the challenges of carry-type dust collectors. - Collects submicron particles with a high cleanliness filter comparable to HEPA, and incorporates an ozone generation device for virus inactivation. - Filter replacement is as simple as wrapping it around the main unit. - Controls ambient ozone concentration with an ozone sensor. **Applications** Space disinfection and deodorization in work environments. **Specifications** Power supply: AC100V 500W Processing air volume: 30m³/min Ozone generation: 500mg/h Cleanliness: 99.9% at 0.3μm (quasi-HEPA) Startup method: ON/OFF Dimensions: W680mm × T1020mm × D1280mm Weight: Approximately 82kg

• Ozone Generator
• Air purifiers
• Dust collector

<Achievements in Large Factories> Fluorescent penetrant testing liquid used during non-destructive testing By combining our "ECO Clean LFP" with our unique stirring adsorption tank, we successfully removed COD from penetrant liquid wastewater with a concentration of about 1,300 ppm, bringing it down to river discharge standards. ＼ Significant Reduction in Treatment Costs ／ The cost of industrial waste disposal is approximately 80,000 yen per ton for wastewater and about 17,000 yen per ton for solid waste. 　↓ In the case of "ECO Clean LFP" 1 ton of wastewater becomes about 15 kg of concentrated sludge (solid), so the treatment cost is around 【300 yen】! (According to our estimates) This allows for a significant reduction in both the amount of waste and costs. In the factory, we were using methods such as coagulation and sedimentation, biological treatment, and activated carbon treatment, but the enormous costs were a challenge. The introduction of ECO Clean LFP has achieved significant reductions! <Features of ECO Clean LFP> Powdered activated carbon is attached to our unique pleated filter, adsorbing and removing TOC/BOD/COD, color, odor, harmful substances, and VOCs. If you are struggling with "treatment of cleaning wastewater and effluent" or "disposing of liquid industrial waste at high costs," please feel free to contact us through the inquiry button! We are currently accepting requests for free sample analysis.

• Water treatment equipment

From April 2022, with the enforcement of the Plastic Resource Circulation Promotion Act, businesses are required to actively engage in the recycling of plastics and other related efforts. 【Do you have any of these concerns?】 - Using a large amount of water for cleaning waste plastics - Needing MBR treatment or dehydration treatment to process wastewater - Wanting to reduce costs and environmental impact related to wastewater ＼Please consult us about your concerns!／ By making wastewater treatment "circular" with our technology, we will achieve reductions in water running costs, solutions to environmental issues, and improvements in product quality! 【Introducing our water treatment products】 ■ High-precision water treatment device ECO Clean LFP: Achieves resource and cost reduction ■ Pleated dryer Dehydration: High added value through powder drying and solution recovery! ■ Ozone microbubble O Micron III: Efficiently sterilizes, deodorizes, and decolorizes liquids ＼We have many achievements in technology awards!／ - 46th Excellent Environmental Equipment Award "Chairman's Award of the Japan Industrial Machinery Manufacturers Association" - 46th Invention Award "Main Prize" Please feel free to consult us for more details!

• Wastewater/wastewater treatment equipment

In recent years, it has become common to experience linear precipitation zones and unexpected heavy rainfall from summer to autumn. As a result, measures to prevent overflow in all types of sedimentation tanks, such as final settling ponds for sewage and activated sludge treatment, are being sought. ＼＼Right away, do you have any of these concerns? ／／ - Worried about overflow in the factory's settling pond due to sudden heavy rain... - Is it possible to temporarily increase processing capacity only during periods of high rainfall?... - Can overflow prevention measures be implemented at a low cost?... ＼Features of ECO Clean／ ■ Effective in preventing the external outflow of turbid water and in measures to prevent pollution of rivers and irrigation channels! ■ Detects the water level in the settling pond with a level sensor and automatically adjusts the processing amount. ■ Capable of handling a maximum flow rate of 400 LMH. ■ Purifies industrial water and river water to drinking water quality levels. ■ Compared to conventional MF (hollow fiber and flat membrane), it has a flow rate per unit area that is 10 times higher and an allowable SS (suspended solids) concentration that is 10 times higher. ■ Compared to coagulation sedimentation devices and sand filtration devices, it reduces chemical usage by 90% and installation space by about 90%. ■ Equipped with a unique automatic regeneration device for clogging, enabling fully automated operation. ■ Total support from inquiry to installation work.

• Water treatment equipment

The disaster debris mixed soil separation system "DIMS" is a system that can recycle mixed waste and high-water-content soil, which are major obstacles to disaster recovery, by separating soil, combustible materials, non-combustible materials, and metal fragments as recyclable resources. It is composed of multiple types of equipment centered around an inclined apron conveyor, roll screens, pressure sieves (Power Grind Screens), and combustible separation machines, making it most effective for separating high-water-content soil. 【Total Support from Proposal to Execution for Disaster Soil Treatment】 Our company provides total support for building systems tailored to disaster soil treatment sites, from proposal to execution. Using our mobile disaster treatment plants, we collaborate with local (disaster-affected) municipalities and businesses to achieve rapid disaster recovery efforts. It is also possible to bring demo units to disaster-affected areas for performance verification and conduct test separations. For inquiries regarding emergencies or demo units, please contact us directly.

• Other environmental equipment
• Municipal services and business location
• Sorting machine

The disaster debris mixed soil separation system "DIMS" is a system that can recycle mixed waste, which is the biggest obstacle to disaster recovery (reconstruction), by separating soil, combustible materials, non-combustible materials, and metal fragments as recyclable resources. It is composed of multiple types of equipment centered around an inclined apron conveyor, roll screens, pressure screens (Power Grind Screens), and combustible separation machines, making it effective for soil separation. 【Total Support from Proposal to Execution for Disaster Soil Treatment】 Our company provides total support for building systems tailored to disaster soil treatment sites, from proposal to execution. Using our mobile disaster treatment dedicated plant, we collaborate with local governments and businesses to achieve rapid disaster recovery (reconstruction) efforts. It is also possible to bring demo machines to the site for performance verification and conduct test separations. For inquiries regarding emergencies or demo machines, please contact us directly.

• Other environmental equipment
• Municipal services and business location
• Sorting machine

The "FP Method" is our unique exhaust treatment technology that adsorbs and removes VOCs by attaching powdered activated carbon to a filter, allowing VOCs exhaust to pass through it. 【Features of the FP Method】 ◎ High-efficiency use of activated carbon Using powdered activated carbon significantly improves adsorption speed and capacity compared to granular forms. ◎ Compact The adsorption section is compact and space-saving compared to honeycomb rotors. ◎ Extremely low VOCs exhaust concentration VOCs removal efficiency of 99% (compared to a conventional maximum of 95%). ◎ No generation of NOx or SOx Unlike combustion methods, operation is powered by electricity, resulting in no generation of NOx or SOx. ◎ Filters that are resistant to clogging Our uniquely developed pleated filter has a high precision of 0.15μm × 99.95% PAO, allowing for surface filtration and reducing the likelihood of deep clogging. ◎ Reduced maintenance effort No need for HEPA filters or pre-filters. Filter maintenance (automatic regeneration of powdered activated carbon, automatic dusting and attachment) is achieved through air pulses. Filters can be used for long periods (replacement every 6 years), and consumables require only a few annual replacements of powdered activated carbon. ◎ CO2 emissions are approximately one-third of conventional types. ◎ Annual operating costs are low, approximately one-third of conventional types.

• Gas recovery/treatment equipment
• Dust collector
• Hazardous material processing

Starting from April 2022, with the enforcement of the Plastic Resource Circulation Promotion Act, businesses are required to actively engage in the recycling of plastics and other related efforts. Our company leverages its experience in environmental improvement projects to provide comprehensive support—from planning and design to manufacturing, installation, and after-sales support—for companies that wish to engage in the collection and recycling of used plastics. **Barriers to Establishing Waste Plastic Processing Plants:** - A large amount of water is required for washing waste plastics. - Concerns about costs and environmental impact related to wastewater. - Measures to prevent dust and odor from dispersing into the surrounding environment of the plant. - Ensuring the safety and health of workers is necessary. If you have such concerns, please feel free to consult with us! **Our Contributing Technologies:** - Waste plastic washing water regeneration technology. - Alkaline washing water regeneration. - Waste plastic transportation technology. - Dust collection measures. - Odor control measures (including ammonia and aldehyde odor control). - Cooling water production. etc… **Numerous Awards for Our Technologies!** - 45th Excellent Environmental Equipment Award: "Minister of Economy, Trade and Industry Award." - 46th Excellent Environmental Equipment Award: "Chairman of the Japan Industrial Machinery Manufacturers Association Award." - 46th Invention Award: "Main Prize." For more details, please feel free to consult with us!

• Dust collector
• Wastewater/wastewater treatment equipment
• Ventilation and Exhaust

Starting from April 2022, with the enforcement of the Plastic Resource Circulation Promotion Act, businesses are required to actively engage in the recycling of plastics and other related efforts. 【Are you facing any of these issues?】 - Using large amounts of water to clean waste plastics - Needing MBR treatment or dewatering treatment to process wastewater - Wanting to reduce costs and environmental impact associated with wastewater ＼Please consult us about your concerns!／ By making wastewater treatment "circular" with our "ECO Clean LFP," we will achieve reductions in water running costs, solutions to environmental issues, and improvements in product quality! We are currently conducting free sample tests! ★Please feel free to contact us for more details★

• Water treatment equipment
• Wastewater/wastewater treatment equipment
• Hazardous material processing

<Common Issues in Water Treatment and Wastewater Treatment> I want to reduce my monthly water bill... I introduced a system, but it hasn't delivered the expected results... Wastewater treatment is costly... Maintenance requires time and money... ＼Ryuki Engineering Provides Solutions／ Through thorough hearings, ongoing field tests, and product customization, we offer tailored 'water treatment solutions' for each customer. 【Introducing Water Treatment Products】 ■ Membrane Filtration High-Precision Water Treatment Device ECO Clean: Achieves resource and cost reduction ■ Pleated Dryer Dakkan: Adds high value through powder drying and solution recovery! ■ Ozone Microbubble O-Mikuron III: Efficiently sterilizes, deodorizes, and decolorizes liquids ★ We are distributing "Case Study Materials for Problem Solving" for plating factories, metal processing factories, etc. You can view them immediately from [PDF Download].

• Wastewater/wastewater treatment equipment
• Water treatment equipment

We have obtained ISO 9001:2015 certification. Scope: Development, design, manufacturing, installation, and maintenance of assembly jigs, testing equipment, and environmental equipment for aerospace, nuclear-related facilities, and general facilities. Our company provides valuable environmental technologies across multiple fields, including decontamination and decommissioning measures for radioactive waste, and ground testing equipment for the aerospace industry, including extreme environments. If you are considering the development of special/testing equipment, please consult us. - Testing Equipment Acoustic testing equipment, various carts, assembly jigs, wind tunnel testing equipment, soundproof heavy doors, artificial satellite protective covers, etc. - Reactor Decommissioning (Decommissioning) Radioactive waste decontamination devices, volume reduction devices for radioactive contaminated materials based on the clearance system, fume collectors, dust collection devices, non-destructive measurement devices for fuel rods, blasting equipment, contaminated water filtration devices.

• Other environmental equipment
• Environmental Test Equipment
• Water treatment equipment

Recently, organic fluorine compounds (PFAS), which have been pointed out as harmful to the human body, have been gaining attention. In January 2023, the Ministry of the Environment held its first expert meeting on this issue. ECO Clean LFP is a unique water treatment technology that attaches functional powder to pleated filters, adsorbing and removing dissolved substances such as PFAS (PFOS/PFOA/PFHxS, etc.), BOD, COD, TOC, color, odor, harmful substances, and VOCs.

• Water treatment equipment

At Ryuki Engineering, we propose water treatment solutions tailored to your intended use. We are pleased to announce that our virtual exhibition is now OPEN on our company website!! It faithfully recreates the booth from our real exhibition, allowing you to enjoy the atmosphere of the exhibition. You can watch product videos and download catalogs or make inquiries through the link page. The exhibition will be available until the end of December 2022, so please visit our booth online! ^^ ↓ Access the virtual exhibition via the link below! ↓ *Please turn off your browser's automatic translation feature to prevent garbled text.

• Water treatment equipment

The "Ozone Microbubble O-Micron III" is a device that decomposes organic matter in liquid, disinfects, deodorizes, and decolorizes. The oxidizing power of ozone is seven times that of chlorine, demonstrating very high effectiveness in disinfection, deodorization, and decolorization of water. Additionally, since there is no ozone exhaust, an ozone removal device is unnecessary. [Sample analysis is available] We accept actual materials from customers and conduct sample analysis/tests. If you wish to apply, please use the form below.

• Water treatment equipment
• Water Activation Device
• Wastewater/wastewater treatment equipment

This time, the two types of equipment developed in-house are a ventilation device and a disaster/emergency water purification device. The development was initiated in response to requests from industry stakeholders and business partners for risk avoidance of "composite disasters" caused by the COVID-19 pandemic and natural disasters. Both are our company's first compact devices, designed to be easily introduced into evacuation shelters during disasters, and will also contribute to measures against the COVID-19 virus.

• Filtration Equipment
• Air purifiers