流機エンジニアリング List of Products and Services

The industrial dust collector I series is a groundbreaking dust collector that overcomes challenges that have been difficult for conventional industrial dust collectors to address, such as "space-saving," "high cleanliness," and "maintenance-free." Centered around our unique filter technology, we customize dust collectors to realize our customers' wishes. ★We received the "Director-General's Award from the Ministry of Economy, Trade and Industry" at the 45th Excellent Environmental Equipment Awards★ 【Main Features】 - Achieves ultra-high cleanliness compliant with HEPA (0.15μm × 99.95%) - One of the largest pleated filters in the world - Clogging suppression through surface filtration - Powerful clogging regeneration using subsonic impulse shock waves - Long lifespan due to robust molding structure and mounting method - Compact, lightweight, and excellent seismic resistance 【The factory dust collector "I series" contributes to the realization of a sustainable society】 - SDGs Goal 3 "Ensure healthy lives and promote well-being for all at all ages" Target 3.9 "By 2030, substantially reduce the number of deaths and illnesses caused by hazardous chemicals and air, water, and soil pollution and contamination."

• Dust collector

This is an introduction to a case where our water treatment products were implemented at a recycling plant. The request was, "We want to clean the collected scrap aluminum to enhance its quality and increase its value," and "Is it possible to remove the dirt and odors, such as heavy oil, attached to the aluminum?" By decomposing and deodorizing the oil and other substances from the scrap aluminum, we were able to improve the quality of the scrap aluminum and provide added value. [Case Study] ■ Recycling Plant ■ Request - We want to decompose the attached oil and other substances to clean the scrap aluminum. ■ Implementation Effect - By decomposing and deodorizing the oil and other substances, we improved the quality of the scrap aluminum and provided added value. *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Separation device

At the inorganic materials handling factory, there were challenges such as "wanting to proceed with production efficiently," "the plating solution itself is expensive, so it's a waste to dispose of it," and "we want to reuse it, but the plating solution contains a large amount of particles like nickel, making the quality of the plating solution unstable." The dewatering process generates a clarified liquid with enhanced clarity through cake filtration and allows for the recovery of the cake as a dried powder. We can provide value through the recovery of raw materials, valuable substances, and waste volume reduction by drying the liquid and slurry in the manufacturing and reuse processes. [Case Study] - Inorganic materials handling factory - Request: To recover and reuse the solution - Implementation effect: Solution recovery recycling + minimal waste from slurry drying *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Separation device

In the food service industry, there were challenges such as "the water used for washing cut vegetables is tap water, and the wastewater (muddy water) after washing goes directly into the sewage..." and "there are concerns about general bacteria and E. coli even for reuse," as well as "the environmental impact of discharging into the sewage is also a concern." The "ECO Clean" that has been introduced is a device in the area of precision filtration membranes (MF), which purifies the turbidity of the washing wastewater to the level of tap water. This reduces water bills, including wastewater recycling, and also lowers environmental impact. General bacteria are reduced to 1/50, and E. coli is not detected. [Case Study] ■ Food Service Industry ■ Implementation Effects - Reduced water bills and environmental impact through washing water recycling - General bacteria reduced to 1/50, E. coli not detected *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Separation device

The Industrial Dust Collector I Series is a groundbreaking dust collector that overcomes challenges that have been difficult for conventional industrial dust collectors to address, such as "space-saving," "high cleanliness," and "maintenance-free." Centered around our unique filter technology, we customize dust collectors to realize our customers' "wish list." ★We received the "Director-General's Award from the Ministry of Economy, Trade and Industry" at the 45th Excellent Environmental Equipment Awards★ 【Main Features】 - Achieves ultra-high cleanliness compliant with HEPA standards (0.15μm × 99.95%) - One of the world's largest area pleated filters - Suppresses clogging through surface filtration - Powerful clog regeneration using supersonic impulse shock waves - Long lifespan due to robust molded structure and mounting method - Compact, lightweight, and excellent seismic resistance 【The factory dust collector "I Series" contributes to the realization of a sustainable society】 - SDGs Goal 3 "Ensure healthy lives and promote well-being for all at all ages" Target 3.9 "By 2030, substantially reduce the number of deaths and illnesses caused by hazardous chemicals and air, water, and soil pollution and contamination."

• Dust collector

"Dakukan" is an advanced dewatering and drying device for powder materials that can perform solid-liquid separation, dewatering, and drying all in one unit. 【Features of Dakukan】 - Capable of solid-liquid separation, dewatering, and drying in one unit - New technology that supports both powder and liquid recovery - Closed system design to minimize powder exposure - Suitable for small quantities and a variety of products - Compatible with high-concentration slurry - Generally does not require coagulants or filtration aids - Can be installed in narrow spaces - Few moving parts in the main unit, reducing maintenance costs 【Main Challenges for Users】 - Want to recover particles contained in aqueous solutions - Want to remove foreign substances and recycle liquid - Want to perform particle flushing after filtration - Need to perform filtration and drying in one unit due to limited installation space - Do not want to include concentration devices like MF membranes before the filtration unit - Existing devices have high initial costs - Not suitable for small quantities and a variety of products, and maintenance is difficult

• Drying Equipment

<Common Issues in Water Treatment and Wastewater Treatment> I want to reduce my monthly water bill... I introduced a system, but it hasn't met my expectations... Wastewater treatment is costly... Maintenance requires time and money... ＼Ryuki Engineering has the solution／ Through thorough hearings, ongoing field tests, and product customization, we provide tailored "water treatment solutions" for each customer. 【Introducing Water Treatment Products】 ■ Membrane Filtration High-Precision Water Treatment Device ECO Clean: Achieves resource and cost reduction ■ Pleated Dryer Dakkann: Adds high value through powder drying and solution recovery! ■ Ozone Microbubble O-Mikuron III: Efficiently sterilizes, deodorizes, and decolorizes liquids ★ We are distributing "Case Study Materials" for plating factories, metal processing factories, etc. You can view them immediately from the 【PDF Download】.

• Wastewater/wastewater treatment equipment
• Water treatment equipment

This is an introduction to a case where our water treatment products were implemented at a metal processing factory. The request was to efficiently recover rare metals from high-concentration rare metal-containing water (valuable materials) without reducing their concentration. Previously, multiple processes were carried out using several machines, which was labor-intensive and costly. We consolidated this into one machine through dewatering. The dewatering unit now takes on all the roles of the previously used equipment, achieving significant reductions in installation costs, installation space, and running costs (electricity and maintenance expenses). [Case Study] ■ Metal processing factory ■ Request: To efficiently recover valuable materials from containing water ■ Implementation effect: Reduction in installation costs and running costs *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Separation device

【Specific Issues】 A customer was looking for a filter unit to recover powder (product) in the manufacturing process of nanomaterials. The target substance contained a small amount of corrosive gas, had a large amount of dust, and the temperature range was high at 150 to 170 degrees. Additionally, there was a high moisture content, posing a risk of internal adhesion due to condensation, and they had been repeatedly turned down for production. The delivery time was also short, at 1.5 months, and they were seeking a solution... 【Solutions from Ruki Engineering】 - A filter designed for nano powders, with heat and corrosion resistance specifications, and a body made of SUS316. - A switching operation of two filter units as a set (offline). - Insulation jacket specifications to prevent condensation. We were able to respond to the short delivery time, and now we are contributing to environmental improvement. ■If you have similar concerns, please contact us!■

• Dust collector
• Air purifiers

The "Flat Dakkann" is a tabletop-sized flat membrane dehydration and drying device derived from Dakkann, designed for small quantities and diverse research and development applications. Its compact size allows for research and development as well as various sample tests without the need for a dedicated space, thereby improving efficiency. It enables high-performance dehydration and drying easily, allowing for in-house research and development of small quantities and diverse products, which helps reduce costs. 【Features】 ■ Tabletop size ■ Easy high-performance dehydration and drying ■ Cost reduction for small quantities and diverse products in-house ■ Increased efficiency due to no space restrictions *For more details, please refer to the PDF document or feel free to contact us.

• Other metal materials
• Testing Equipment and Devices
• Wastewater/wastewater treatment equipment

Dust collectors, fans and blowers, air conditioning units, etc., available in a wide variety! Since we handle manufacturing in-house, we can offer tailored equipment and facilities even for rental products that meet individual requirements!

• Ventilation and Exhaust
• Other environmental equipment

The "MA-56" is a mobile air conditioner with approximately 15 times the capacity of a typical household air conditioner (for a 12-tatami mat room). It can provide cooling, dehumidification, and heating, making it suitable for all seasons. It can be used for heat and cold countermeasures in event venues and gymnasiums, as well as for improving the quality of blasting and painting, dehumidification, heating, rust prevention, and other applications. *Please feel free to contact us for more details.*

• Cooling system
• air conditioning
• Dehumidifier

Cool anywhere! It is active in various factories and outdoor work sites! - Rapid cooling with a jet air speed of up to 37 m/sec! - Outdoor temperature difference of minus 12.3℃! (According to our measurement data / Outdoor temperature 30.2℃, humidity 45.1%) - Easy to move with casters! - An oasis in scattered hot work sites! - With the optional bellows hose, dust can also be blown away. *Please feel free to contact us for more details.

• Cooling system

"Achieving 1/10 the cost in turbidity water treatment!" ★ECO Clean has won the "Main Award" at the 46th Invention Awards and the "Chairman's Award of the Japan Industrial Machinery Manufacturers Association" at the 46th Excellent Environmental Equipment Awards★ What is 'ECO Clean'? ■ Purifies industrial water and river water turbidity to tap water levels A device that can be recycled and reused as water for production lines ■ Comparison with conventional MF (hollow fiber and flat membrane) Flux per unit area / 10 times, allowable SS (suspended solids concentration) / 10 times ■ Comparison with coagulation sedimentation and sand filtration devices Chemical usage / 90% reduction, installation space / approximately 90% reduction ■ Equipped with a unique automatic clogging regeneration device for fully automatic operation ■ Filter lifespan of 2 to 4 years, filter replacement in 10 minutes, easy maintenance ■ 10 patents obtained, 2 pending (as of July 2020) 【Do you have any of these concerns?】 ■ Want to increase purity to below 1 turbidity, which is difficult with existing water treatment equipment ■ Want to increase treated water volume, but installation space is limited ■ Disposable filters clog quickly, leading to high replacement costs and effort ■ Considering equipment installation, but membrane filtration equipment is expensive If you have such challenges, please feel free to consult with us!

• Water treatment equipment
• Filtration Equipment
• Wastewater/wastewater treatment equipment

ECO Clean for Asbestos Wastewater is a new water treatment system designed to process contaminated water generated at your site. 【Product Features】 - Utilizes hydrophilic PTFE membrane, achieving 99% high purity at 0.15μm (ideal for asbestos wastewater treatment) - Adopts a pleated filter with a large surface area, providing high flow rates in a compact design - Not a disposable filter like string-wound filters, reducing the amount of filter waste (waste asbestos) - Running costs are 1/10 of the coagulation sedimentation method - Surface filtration minimizes clogging and allows for automatic regeneration - Compact design enables use in narrow spaces *For more details, please feel free to contact us.

• Water treatment equipment

"Achieve precise filtration at low cost!" The high-precision water treatment regeneration device 'ECO Clean' separates and removes almost all particles contained in cleaning water, wastewater, etc., allowing it to be recycled and reused as utility water for production lines. ★ECO Clean received the "Main Award" at the 46th Invention Awards and the "Chairman's Award of the Japan Industrial Machinery Manufacturers Association" at the 46th Excellent Environmental Equipment Awards★ "Do you have any of these concerns?" ■ You want to increase the cleanliness to below a turbidity of 1, which is difficult with existing water treatment equipment (sand filtration equipment). ■ You want to increase the treated water volume, but the installation space is limited. ■ Disposable filters clog quickly, leading to high replacement costs and effort. ■ You are considering introducing equipment, but the cost of (hollow fiber membrane equipment) is too high. If you have such challenges, please consult us. Our 'High-Precision Water Treatment Regeneration Device ECO Clean' may be able to solve them. *For more details, please refer to the PDF materials or feel free to contact us.

• Water treatment equipment
• Filtration Equipment
• Hazardous material processing

We would like to introduce a case study from Ryuki Engineering, which proposes a reduction in the running costs of water treatment. We received a request from a resin factory to reduce maintenance costs caused by impurities entering the heat exchanger from the cooling water used during cutting. 【Case Study】 ■Industry: Resin Factory ■Challenges - The large amount of cooling water used to cool the water during cutting contains impurities (resin scraps) that are entering the heat exchanger. - Maintenance costs for the heat exchanger are high, and we want to reduce them. We proposed dehydration to remove impurities from the cooling water. By using the cleaned cooling water in the heat exchanger, we reduced the maintenance frequency from four times a year to once a year. Additionally, we not only removed impurities but also reduced their volume to lower disposal costs. *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• others

This is a dust collection filter for asbestos wastewater generated by the water jet method. It is equipped with a high-purity filter that meets exhaust standards. It achieves overwhelming environmental performance with a cleanliness level exceeding HEPA standards of 0.3μm at 99.97% PAO.

• Separation device

This is a gas-liquid separation device for asbestos wastewater generated by the water jet method. It can safely and continuously separate liquids and gases, improving recovery rates.

• Separation device

The "Ozone Microbubble O Micron III" is a device that decomposes organic matter in liquid, disinfects, deodorizes, and decolorizes. The oxidizing power of ozone is seven times that of chlorine, demonstrating extremely high effectiveness in disinfecting, deodorizing, and decolorizing water. Additionally, since there is no ozone exhaust, an ozone discharge device is unnecessary. ■ Decolorization, disinfection, and deodorization effectiveness of over 99% for water ■ 3.8 billion bubbles per liter of water ■ Efficient utilization of generated ozone contributes to cost reduction! Benefits are available for facilities that require decolorization, disinfection, deodorization, and wastewater purification, such as recycling of factory wastewater, reduction of BOD, COD, and TOC in wastewater, decomposition of organic matter like humic substances in groundwater, treatment of bacteria in cooling water, precipitation of ionized substances, hospitals, restaurants, food processing plants, sewage treatment plants, etc. 【Sample analysis is available】 We accept actual materials from customers for sample analysis/testing. If you wish to proceed, please apply using the form below.

• Water treatment equipment

【Product Features】 ●POINT 1 Equipped with a newly developed large-area quasi-HEPA filter! It has become possible to achieve both airflow and cleanliness, which were challenges for handheld dust collectors. Dust collection performance can be maintained for a long time. ●POINT 2 Filter replacement is super easy Just wrap it around! It can be easily attached and detached with Velcro. ●POINT 3 In handheld models, it has the industry's largest airflow capacity. *For more details, please feel free to contact us.

• Dust collector
• Ventilation and Exhaust

Achieving precise filtration at low cost! Winner of the Grand Prize at the 46th Invention Award! We have received the 'Grand Prize' at the 46th (2020) Invention Award, co-sponsored by the Japan Invention Promotion Association and the Nikkan Kogyo Shimbun. This award is given to medium and small enterprises, individuals, or groups with a capital of less than 1 billion yen that have contributed to the development of industry and the improvement of national life through inventions and ideas. The high-precision water treatment regeneration device 'ECO Clean' can separate and remove almost all particles contained in groundwater, river water, industrial water, and wastewater, allowing it to be recycled and reused as water for production lines. [Do you have any of these problems?] ■ Want to increase the cleanliness to below a turbidity of 1, which is difficult with existing water treatment equipment (sand filtration systems) ■ Want to increase the treated water volume, but have limited installation space ■ Disposable filters clog quickly, leading to high replacement costs and effort ■ Considering equipment installation, but the cost of hollow fiber membrane systems is too high If you have such challenges, please consult with us. Our 'High-Precision Water Treatment Regeneration Device ECO Clean' may be able to solve them. *For more details, please refer to the PDF materials or feel free to contact us.

• Water treatment equipment
• Filtration Equipment
• Hazardous material processing

The Pleated Dryer "Datsukkan" is an advanced dewatering and drying device for powder materials that can perform solid-liquid separation, dewatering, and drying all in one unit. 【Do you have any of these concerns?】 ■ I want to recover particles contained in a solution. ■ I want to remove foreign substances and recycle the liquid. ■ I want to flush particles after filtration. ■ I have limited installation space and want to perform filtration and drying with one unit. ■ I do not want to include a concentration device like an MF membrane before the filtration unit. ■ The initial costs of existing devices are high. ■ They are not suitable for small quantities and diverse products, and maintenance is difficult. ↓↓ Please feel free to consult us about your concerns! ↓↓ 【Features】 ■ Performs solid-liquid separation to dewatering and drying all in one unit. ■ New technology that supports both powder and liquid recovery. ■ Adopts a closed system to reduce powder exposure. ■ Supports small quantities and diverse products. ■ Compatible with high-concentration slurry liquids. ■ Generally does not require coagulants or filtration aids. ■ Equipment can be installed even in narrow spaces. ■ The main unit has few moving parts, reducing maintenance costs. *Please feel free to contact us for more details.

• Water treatment equipment

●Air volume 1500 to 3000 m³/min ●Ultra low noise type, noise level -5dB compared to our company ●Significant energy savings are possible with inverter air volume control.

• Ventilation and Exhaust

The "Aero★MAX Series" is a low-noise, dual-axis reversing fan designed to meet the construction environments of urban settings such as shield tunnels and large cross-section long tunnels. Since the fan speed is controlled by an inverter, there is no no-load current, allowing for significant energy savings compared to variable pitch systems. It is lightweight and can also address INV harmonic issues. The soft start feature prevents damage to ducts and reduces maintenance for the fan. *For more details, please feel free to contact us.*

• Ventilation and Exhaust
• Other environmental equipment

We will provide designs and proposals tailored to your needs.

• Cooling system

This is a packaged tunnel cooling system. With a maximum cooling capacity of 397 kW, it lowers the temperature inside the tunnel while converting moisture into a large amount of drainage, providing a cool breeze sensation. A ventilation system can be constructed to meet the needs of the site. The tunnel cooler consists of a heat exchanger, chiller unit, and cooling tower. By connecting to a blower, it cools outside air and sends it into the tunnel.

• Cooling system

Dehumidified cold air is ventilated locally through small-diameter ducts. It is particularly effective in large-section shields and ECL/TBM construction. With a rich variety of options, systems can be constructed to suit the installation and ventilation conditions in narrow tunnels, utilizing cold heat sources such as muddy water, spring water, and stream water, as well as oil coolers and fin coil types. We can design according to your requirements, so please feel free to consult with us.

• Cooling system

Quick flushing with powerful jet air at 30m/s. Ideal for decontamination cleaning of high-concentration and hazardous dust, such as during the dismantling of incineration facilities and the purification of VOC-contaminated soil.

• Air Shower

"ReNEW'" is a high-pressure dust collection device designed for renovation work. 【Features of ReNEW'】 - Utilizes a high-pressure blower (-8.0kPa) suitable for long-distance piping (300m) - Compact design allows for installation with a small mobile crane even in narrow bridges and under elevated structures - Adoption of φ300 small-diameter ducts makes installation easy even in tight hanging scaffolds - High-performance PTFE membrane filter (particle collection efficiency of 99.97% for 0.3μm particles) prevents the dispersion of lead-containing dust - Surface filtration minimizes clogging, allowing for long-term use with no maintenance required - Improved ventilation performance due to reliable suction power significantly enhances the working environment - Automatic filter regeneration with powerful air pulses makes it easy to collect large amounts of dust - Optional activated carbon powder supply adds deodorizing functionality for odors and VOCs generated during painting work *Please feel free to contact us for more details.

• Dust collector

The "CF・CPH Series" is an ideal environmental protection device for addressing heavy metal-containing dust generated in plant facilities and soil improvement works. Equipped with high-purity filters that meet exhaust standards for heavy metal-containing dust, which includes regulated substances such as nickel, cobalt, lead, and mercury. It achieves overwhelming environmental performance with a cleanliness level exceeding HEPA standards of 0.3μm at 99.97% PAO. Additionally, the collection of dust can also include proposals for secondary scattering prevention features (optional). *For more details, please feel free to contact us.

• Dust collector

By using inverter operation, it can be set to any air volume, allowing for significant cost reduction. Measures against harmonics are also thorough. The air pulse cleaning mechanism automatically regenerates the filter, achieving maintenance-free operation over a long period.

• Dust collector

The self-propelled telescopic duct moves along the rail and sucks up dust just before the face. Compared to conventional methods, it cleans the entire tunnel with a lower air volume (only in the case of a combination with a filter-type dust collector). This method is also recommended by the International Tunneling Association (ITA). *For more details, please feel free to contact us.*

• Dust collector

■Non-Leak Duct (for Positive Pressure) ●Non-Leak Duct (Packing Type) (Patent Application No. 2015-38261) Measured value φ2500 at 8kPa with a maximum leakage rate of 0.1m³/min (per one fastening connection point) Available in standard length of 10m for φ800 to φ2500 ●Small Diameter Non-Leak Duct (Patent No. 4917069) This is a duct for positive pressure. Air leakage is almost zero. With a leakage rate of 1/3700 compared to conventional ducts, it is an excellent air duct for long-distance small cross-section shield and tunnel ventilation. Available in standard length of 10m for φ300 to φ700 ■Pita Joint Duct (for Negative Pressure) This is a duct for negative pressure. Air leakage is almost zero even at -80kPa. With low friction resistance and excellent long-distance air delivery characteristics, it allows for significant energy savings and enables the use of a smaller blower. Compared to conventional steel pipes, the outer diameter of the joint section is smaller, allowing for space-saving installation. It offers excellent cost performance for methane gas exhaust, long-distance shields, small cross-section tunnel mechanical excavation, TBM, etc.

• Ventilation and Exhaust

This is a medium-distance axial fan. It features an ultra-low noise level with a minimum of 74 dB(A) and reduces CO2 emissions by 32% compared to conventional models due to its low power consumption. The wide campus can be used as an advertising space. *For more details, please feel free to contact us.*

• Ventilation and Exhaust

This is a low-noise ventilation fan. It has a large airflow capacity, allowing for fewer units to be installed, significantly reducing costs. Equipped with an inverter and a schedule timer, it can be set according to operational needs. Management and maintenance are easy. *For more details, please feel free to contact us.

• Ventilation and Exhaust

The "TF Series" is a turbo fan capable of high pressure and long-distance air delivery, surpassing that of a dual-axis reversing fan. It has a high pressure and can achieve a smaller duct diameter compared to dual-axis reversing fans with the same air volume. It can be used for both discharge and suction. *For more details, please feel free to contact us.*

• Fan motor
• fan

The "SB・TB Series" is a blower suitable for excavation lengths of over 1000m, such as small-diameter shields and TBMs. With inverter control, it allows for energy-saving operation with airflow adjusted to the length of the piping. It can be used for both discharge and suction, and there are products available that can handle flammable gases. *Please feel free to contact us for more details.

• others

This is a packaged high-pressure blower developed specifically for long-distance ventilation using small-diameter shields and TBMs. Due to the high wind pressure, spiral steel pipes can be used, allowing for more space. Thanks to its low air volume characteristics, which minimize airflow reduction even at high pressures, reliable ventilation can be achieved. *For more details, please feel free to contact us.*

• Ventilation and Exhaust

This is a supplementary blower suitable for shield tunnels where combustible gases are generated. It has a compact design that does not take up much space on the cart. *For more details, please feel free to contact us.*

• Ventilation and Exhaust

The "HF Series" is a smoke collector that captures oil mist, black smoke, and fumes generated during the dismantling of shield machines. It improves the working environment by collecting smoke such as welding fumes with a high-performance filter. Optional gas adsorption and deodorization are also available. *For more details, please feel free to contact us.*

• others

BAKYU MAX is a vacuum cleaner that balances functionality and workability. It is compact and lightweight, making it suitable for use in elevators. It operates at low noise levels and its exhaust is equivalent to that of a clean room, taking environmental considerations into account. It completely captures harmful substances, from particles to solids. Being maintenance-free, it also reduces filter replacement costs. For more details, please contact us or download the catalog. Before placing a formal order, it is possible to conduct a practical test using a rental machine. You can verify the performance and effectiveness before introducing the dust collector. *For details on the demo, please contact us.*

• Dust collector

- Cleanliness level of 0.05 mg/m³, optimal sealing. - Reduced cross-sectional dimensions for TBM, compact and lightweight, making it suitable for small cross-section NATM. Additionally, we can design it to match TBM and subsequent carts. - The machine section is completely refreshed, allowing for low air volume, making it economical. - The fan power is small, and it operates at ultra-low noise (79 dB). - Teflon-coated filter + air pulse cleaning for maintenance-free operation, mist inclusion is also acceptable. - When combined with a cooling unit, it can provide dehumidified air conditioning. *Please feel free to contact us for more details.*

• Dust collector

"ECO Clean" achieves high clarity, compactness, and high flow rate by adopting a pleated hydrophilic Teflon filter. It recovers clogging with the "automatic surface cleaning method in the air," allowing for long-term operation. 【Features】 ■ Adopts an automatic surface cleaning method in the air ■ Running costs are 1/10 compared to the coagulation sedimentation method ■ Even with fluctuations in turbidity and treatment flow rate, it processes to a turbidity of 0.5 or lower. ■ Filtration accuracy: 0.15μm × 99.95%, filtering to the level of E. coli and Legionella bacteria. ■ The device can be mounted on a 4-ton unic crane, enabling on-site treatment.

• Water treatment equipment
• Wastewater/wastewater treatment equipment
• Other water treatment equipment

With a maximum temperature of 180℃ and a filtration efficiency of 99.95% for 0.15μm PAO, this ultra-high-performance filter achieves innovative filtration. ◎ High temperature: up to 180℃, instantaneous 200℃ ◎ High purity: 0.15μm, 99.95% PAO, PTFE membrane ◎ Space-saving: large area pleated design with a maximum of 37 square meters ◎ Low pressure drop, long lifespan: shockwave air pulse regeneration method ◎ High durability: resistant to acids, alkalis, and hydrolysis Options: ◎ Gas cooling: micro mist cooling device ◎ Neutralization coating: adsorbed powder quantitative adsorption device

• Dust collector