イーティーエィコンポーネンツ（E-T-A） List of Products and Services

This is an electronic circuit protector specifically designed for DC24V. It is a smart circuit protector that makes appropriate judgments for various events in DC24V circuit loads. It disconnects immediately during a short circuit, cuts off at the appropriate time during overcurrent, and ignores inrush current, allowing the load to operate safely for a longer duration. Additionally, it complies with UL1604 Class 1, Div 2, Group ABCD, which permits its use in hazardous locations, making it suitable for protecting DC circuits in plant equipment. It is also compliant with UL NEC Class 2 for currents between 0.5-3.8A. Remote ON/OFF operation is possible as an option. Rated voltage: DC24V (also available for DC12V and DC48V) Rated current: 0.5-16A

This is the fluid electromagnetic circuit protector 8340-F. Rated voltage: AC240V / 415V, AC250, DC80V Rated current: 0.02A...50A If you have any questions regarding the introduction below, please feel free to contact us.

The electronic circuit protector ESX10 is designed to reliably disconnect only the affected circuit in a DC24V load circuit when a fault occurs, before the protection function of the DC24V power supply is activated.

12.5mm slim circuit protector per pole Can be mounted on a panel or installed on a DIN rail

This is a plug-in type circuit protector. 1. Easy to attach and detach 2. Standardization of design 3. Shortened manufacturing lead time These features help reduce labor costs! 1. Easy to attach and detach Installation is as simple as plugging it into a dedicated socket mounted on a DIN rail! It can be easily attached and detached during repairs and maintenance. 2. Standardization of design Even if there is a change in the load current value, you only need to adjust the current value of the circuit protector! By only determining the width of the dedicated socket, you eliminate the need for redesign, enabling standardization. 3. Shortened manufacturing lead time First, a standard panel is manufactured, and once the current value is determined through customization, you simply plug in the circuit protector! Since there are no changes to terminal connections due to the change of the circuit protector, it allows for time savings during manufacturing.

The "Switch-Compatible Circuit Protector 3120 Series" eliminates the need for components such as switches, harnesses, fuse holders, and fuses, reducing the number of parts to achieve lower costs and compact size. It does not require fuse replacement, minimizing downtime. When an overcurrent occurs, the circuit breaker function activates, and the rocker switch automatically turns OFF. By removing the abnormal load and turning the rocker switch ON again, it can be reused. Its design harmonizes with various devices and equipment, making it suitable for a wide range of applications. 【Features and Specifications】 ■ Complies with international safety standards for medical electrical equipment (EN60601-1) ■ Also meets UL1077, CSA, VDE, and CQC standards ■ Suitable for a wide range of applications including machine tools, scientific instruments, construction machinery, vehicles, and motors ■ Dimensions: D25×W48×H52mm ■ Products with modules such as auxiliary circuit modules are also available Additionally, we offer: The "3130 Series" with 1-pole to 3-pole options, The fuse holder type "1110 Series," and The "3140 Series" with 3-pole and 4-pole options available in IP66 specifications. We provide circuit protection suitable for our customers.

E-T-A is a specialized manufacturer of circuit protectors founded in Germany in 1948. It boasts a world-class range of products and a high number of acquired standards. The company owns a UL-certified testing laboratory and is committed to the development of global safety standards. ■ Excellent specifications to meet needs - Compatible with both AC and DC - Rated voltage: 12–1000V - Rated current: 0.01–500A - Operating temperature range: -55 to 125℃ - Altitude: up to 25,000m - Vibration resistance: up to 100G - Shock resistance: up to 100G ■ High safety standards and reliable products certified by many international safety standards - Compliant with VDE, UL, CSA, CCC, TUV, GL, and various other standards ■ A wide variety of circuit interruption methods - Thermal (thermal dynamic) - Thermal-magnetic (thermal dynamic electromagnetic) - Magnetic (electromagnetic) - Hydraulic-magnetic (fluid electromagnetic) - Electronic (compatible with industrial network IO-Link, Modbus, etc.) ■ High-level, high-quality specifications to meet needs ■ About E-T-A's range of circuit protector products - For equipment integration - For automotive use - For FA equipment and manufacturing lines These can be broadly categorized into the three areas mentioned above.

Slim Type 1-Pole to 3-Pole DIN Rail Mounted Circuit Protector Series Names - 1180 - 201 - 2210-T - 2210-S The thinnest is 8.2mm per pole (1180 series), and even the 3-pole type is only 37.5mm! (2210 series) Overview Specifications Rated Voltage: AC277V, 3AC 433V, AC277/480V, DC80V Rated Current: 0.05–32A Standards Obtained: UL, CSA, VDE, CQC, DNV, GL, KTL *Please check the data sheet for individual specifications of each product. Used for downsizing control panels and replacing DIN rail mounted fuses.

Small 2-Pole Thermal Circuit Protector 3120-N-G Series Simultaneous overcurrent protection for two poles expands design possibilities. 1. Simultaneously disconnects two circuits 2. Both positive and negative disconnection is possible Additionally, as a circuit protector, it eliminates the need for fuse replacement, reducing downtime. When the overcurrent causes the disconnection function to activate, the push button pops out, disconnecting the circuit (automatically OFF). By removing the abnormal load and turning the push button ON, it can be reused. 【Features】 ■ Compact with 2 poles ■ Complies with international safety standards for medical electrical equipment (EN60601-1) ■ Also meets UL1077, CSA, VDE, and CQC standards ■ Dimensions: D26.4×W52.1×H52.4mm ■ Products with module options such as auxiliary circuit modules are also available *This product is the circuit protector 3120-N-G, which has only the disconnection function without the switch function of the switch-compatible circuit protector 3120-N series. There is a separate page for the switch-compatible circuit protector 3120 series.

Replacement of conventional fuses with "circuit protectors" There is no need to select a large rated current (frame) to avoid startup current trips, allowing for miniaturization of PCB patterns. Since fuse replacement is unnecessary, design flexibility increases. The "Panel Mount Type 106 Series" and "Board Mount Type 1410-L2" consolidate the roles of fuse holder and fuse into one. The "3120 Series" combines four functions: a two-pole rocker switch, fuse, fuse holder, and harness into one, with the added inlet function in the "3120 + IEC Inlet Integrated Type." 【Benefits (partial)】 ■ No need for replacement fuses ■ Reduced after-sales labor costs for fuse replacement ■ No mistakes in the current rating of replacement fuses ■ No abnormal trips due to aging degradation like fuses ■ Miniaturization and reduced wiring through component integration *For more details, please download the PDF or feel free to contact us.

The "LED Illuminated Switch and Circuit Protector 3120 Series" eliminates the need for separate components such as switches, harnesses, fuse holders, fuses, LEDs, and LED power supplies, reducing the number of parts to create a single product. Additionally, it requires only one panel cutout, achieving cost reduction and miniaturization. As a circuit protector, it does not require fuse replacement. When the overcurrent protection activates, the rocker switch automatically turns OFF. By removing the abnormal load and turning the rocker switch ON again, it can be reused. This also helps minimize downtime. Illumination Status: LED lights up when the rocker switch is ON, and the LED turns off when the rocker switch is OFF. The LED also turns off when the overcurrent protection is activated and the device is in a tripped state. 【Features and Specifications】 - Mechanism that does not require a dedicated power supply for LED illumination - Compliant with international safety standards for medical electrical equipment (EN60601-1) - Also meets UL1077, CSA, VDE, and CQC standards - Suitable for a wide range of applications including machine tools, scientific instruments, construction machinery, vehicles, and motors - Dimensions: D25×W48×H52mm - Products with modules such as auxiliary circuit modules are also available in the lineup.