安田精機製作所 List of Products and Services

- This is a testing machine for evaluating the impact strength of plastic films, paper, and similar materials. - We also offer an L-type model for testing in a low-temperature chamber. - Attach the test specimen to the adjusted testing machine and release the pendulum. - The hemispherical impact ball attached to the tip of the pendulum directly reads the amount of work required to create a hole in the test specimen from the scale. - There is also a low-temperature chamber type [181-L] that can conduct tests in environments ranging from -30 to 60 degrees. <Reference Standard> ASTM-D3420 <Regarding Catalog Download> Please request the catalog through the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

• Other measurement, recording and measuring instruments

- Attach the test specimen to the adjusted testing machine and release the pendulum. - The amount of work required for the hemispherical impact ball attached to the tip of the pendulum to create a hole in the test specimen is read directly from the scale. - It is equipped with a low-temperature chamber (-30 to 60 °C, refrigeration type). <Reference Standard> ASTM-D3420 [Regarding Catalog Download] Please request the catalog from the related links below or through inquiries. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine for the simple evaluation of the adhesive properties of adhesive tape and adhesive sheets. - By changing the size of the ball and rolling it repeatedly from a specified position on the inclined plate, we find the largest ball that stops within the measurement area (the ball does not move for more than 5 seconds). - There is also a type that allows the angle of inclination to be changed from 15° to 45° (variable type). <Reference Standard> JIS-Z0237 【Regarding Catalog Download】 Please request the catalog from the related links below or through inquiries. *For products that do not have a standalone catalog, please request the comprehensive catalog.

• Other measurement, recording and measuring instruments

- This is a testing machine (drop ball tester, drop impact tester) used to evaluate the impact resistance of coatings and similar materials. - A specified weight (striker) held by a magnet holder (or air holder) is dropped from a predetermined height onto the test specimen, and the failure condition of the specimen (cracking, peeling) is observed. <Reference Standards> JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272 【About Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine that automatically conducts heating deformation tests for rubber and plastic insulated wires. - You can set the preheating time and test time on the touch panel, and it automatically performs a series of processes from loading and unloading operations to displaying and printing test data. <Reference Standards> JIS-C3005, C3307, K6723, ASTM-D621 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Other inspection equipment and devices

- This is a testing machine (heating deformation testing machine) for conducting heating deformation tests on rubber and plastic insulated wires. - The thickness of the test specimen is measured, and it is placed in a test device heated to a specified temperature for a specified time. - Next, the test specimen is placed between parallel plates, subjected to a specified load, and further heated, after which its thickness is measured in that state. - The reduction rate (heating deformation rate) is calculated from the thickness of the test specimen before and after heating. - The temperature can be set up to a maximum of 200°C. <Reference Standards> JIS-C3005, C3307, K6723, ASTM-D621 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a specimen creation machine that automatically cuts and molds test pieces into dumbbell or strip shapes from rigid plastic sheets. - The cutting and molding is done by passing through two spiral cutters. - By changing the cutter rotation speed, cutter pressure, and feed speed, optimal processing conditions can be set according to the test pieces to be produced. 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products that do not have a standalone catalog, please request the comprehensive catalog.

• Other processing machines

- This is a specimen manufacturing machine that automatically cuts and molds test pieces in the shape of dumbbells or strips from rigid plastic sheets. - Simply set the plastic sheet, and the specimen molding machine will cut and mold it into the desired test piece. - This eliminates the hassle of having to clamp the plastic sheet for each test. 【Regarding Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products that do not have individual catalogs, please request the comprehensive catalog.

• Other processing machines

- This is an automatic "notch processing machine" equipped with a standard electric feeding function for the clamp. - By changing the cutter rotation speed and feeding speed, optimal processing conditions can be achieved depending on the test specimen. - There are two types available: the 189-PNA for notch processing only and the 189-PNCA equipped with a side cutter. <Reference Standards> JIS-K7144, ISO-2818 【Regarding Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Other processing machines

- Sharpie is a machining tool (notching tool) that processes notches on test pieces for Izod impact testing. - The notch cutter adopts a single-blade chip exchange system, achieving cost reduction during replacement. <Reference Standards> JIS-K7144, ISO-2818 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products that do not have an individual catalog, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a test kneading roll for rubber and plastic (test roll machine, kneading roll machine, test kneading roll machine, roll mill). - The body is designed to be compact for use mainly in laboratories. - It is equipped with various emergency stop functions and excels in safety. - In addition to the heater type 191-TM, there is also a steam heating type 191-WM. <Reference Standards> JIS-K6742, K6743 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a separate catalog, please request the comprehensive catalog.

• Other processing machines

- This is a test kneading roll for rubber and plastic (test roll machine, kneading roll machine, test kneading roll machine, roll mill). - The body is designed to be compact for use mainly in laboratories. - It is equipped with various emergency stop functions, ensuring excellent safety. - In addition to the heat transfer medium heating type, there is also an electric heating type (191-TM). - There is also a steam heating type (oil type). <Reference Standards> JIS-K6742, K6743 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a separate catalog, please request the comprehensive catalog.

• Other processing machines

- This is a testing machine for evaluating the flexural resistance of shoe upper leather and other thin leathers. - One end of the test specimen is folded in half and fixed in the upper chuck, while the other end is folded in half in the opposite direction and fixed in the lower chuck. - The upper chuck performs a reciprocating motion at a speed of 100±5 times per minute, bending the test specimen to an angle of 22.5°. - The reciprocating motion is stopped after a specified number of cycles or time, and the damage to the test specimen is assessed according to the specified criteria. <Reference Standards> JIS-K6542, K6557-8, (K6545), ISO-5402-1 【Regarding Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

• Other measurement, recording and measuring instruments

This is a testing machine for evaluating the flexural resistance of shoe upper leather and other thin leather materials in a low-temperature chamber ranging from -35 to 60 °C. One end of the test specimen is folded in half and fixed in the upper chuck, while the other end is folded in half in the opposite direction and fixed in the lower chuck. The upper chuck performs a reciprocating motion at a speed of 100 ± 5 times per minute, bending the test specimen to an angle of 22.5°. The reciprocating motion is stopped after a specified number of cycles or time, and the damage to the test specimen is assessed according to the specified criteria. <Reference Standards> JIS-K6542, K6557-8, (K6545), ISO-5402-1 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine for evaluating the insulation strength of solid electrical insulating materials (insulation strength testing machine, dielectric strength testing machine). - By changing the electrodes, it can accommodate test specimens such as plates, sheets, fabrics, films, tapes, tubes, varnishes, and coatings. - Recently, it has also been used for the insulation films between the positive and negative electrodes inside lithium-ion batteries. - Even if the test specimen is enameled wire, by changing the electrodes, insulation breakdown tests can be conducted using the metal foil method or the two-electrode method. - It supports both continuous voltage increase method and step voltage increase method. - It is also compatible with guarantee tests and dielectric strength tests. <Reference Standards> JIS-C2110, (C3003), C3216-5, IEC-60851-5 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a device for producing test specimens for insulation breakdown testing of enamel wire (test machine with two test specimens for insulation breakdown testing). - The enamel wire is folded in half after being cut to the specified length. - Both ends of the enamel wire are fixed in a fixed chuck, and the folded section is hung on a holder, while applying the specified tension to create test specimens according to the specified number of times. - We offer a manual handle type for one specimen and an electric type for five specimens. <Reference Standards> JIS-(C3003), C3216-5, IEC-60851-5 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a single item catalog, please request the comprehensive catalog.

• Other processing machines

- This is a testing machine (cold resistance testing machine, cold resistance testing device) for conducting cold resistance tests on vinyl leather cloth, plastic, rubber-coated fabrics, etc. - Fix the test specimen in the chuck of the specimen holder and attach it so that the specimen is positioned at the center of the anvil in the low-temperature chamber. - After installing it in the low-temperature chamber, drop the falling body 5 minutes later to check for any cracks in the test specimen. - By rotating the specimen holder, up to 6 tests can be conducted continuously. - The cooling method can be selected between dry ice type and refrigeration type. <Reference Standards> JIS-K6404-13, (K6404-13), K6772, ISO-4675 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a single item catalog, please request the comprehensive catalog.

• Other measurement, recording and measuring instruments

- This is a testing machine (wear resistance testing machine, cable wear testing machine) for evaluating the wear resistance of low-voltage automotive wires using the wear tape method. - The test specimen is fixed in contact with the wear tape, and a specified weight is placed on top. - The wear tape is moved at a specified speed until the conductor within the test specimen comes into contact with the wear tape, and the length of the wear tape used up to that point is measured. - After adjusting the position of the test specimen and measuring the specified number of times, the wear resistance value is calculated. <Reference Standards> JIS-C3406, JASO, ISO-6722 [Regarding Catalog Download] Please request the catalog through the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

• Other measurement, recording and measuring instruments

- This is a testing machine (wear testing machine) for evaluating the wear resistance of enamel wire using the blade reciprocating method. - Attach the test specimen, remove the insulation coating from one end, and connect the test specimen conduction cable. - Lower the blade onto the test specimen, apply a specified load, and move the blade back and forth to wear down the insulation coating of the test specimen. - Measure the number of cycles until conduction occurs, which will determine the wear resistance. - By rotating the test specimen, measurements can be taken three or four times with the same specimen. <Reference Standards> NEMA-C9.5, JASO, ISO-6722 [Regarding Catalog Download] Please request the catalog through the related links below or by contacting us. *For products without a single item catalog, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a machine (flat heat sealing tester) used to evaluate the thermal adhesive strength of materials such as cellophane and plastic film. - Heat sealing can be performed by arbitrarily setting the heat sealing conditions (temperature, pressure, time). - It is easy to operate as it is pressurized by an air cylinder. 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products that do not have a standalone catalog, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a machine for heat sealing cellophane, plastic films, etc., based on JIS standards. (Thermal gradient testing machine, heat seal testing machine, impulse sealer testing machine) - Accurate pressurization is possible through a pressurization method using actual load. - After setting the temperature and time, and attaching the test load, the test specimen is placed in the designated position for thermal bonding. <Reference Standards> JIS-Z1514, (Z1521), Z1707 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Other measurement, recording and measuring instruments

- The combustion characteristics of plastics and rubber are measured using the oxygen index method. - The oxygen flow rate and nitrogen flow rate are measured when the test specimen, supported vertically in a combustion cylinder (column), burns with a flame. - The minimum oxygen flow rate required for the specimen to continue burning for more than 3 minutes or for the flame length after ignition to continue burning for more than 50mm is calculated, along with the nitrogen flow rate at that time, to determine the oxygen index. - The ISO type is equipped with a function that automatically calculates the oxygen concentration according to the oxygen flow rate on a touch panel. <Reference Standards> JIS-K6269, K7201, L1091, ASTM-D2863, ISO-4589-2, Fire Service Act 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine (wear resistance testing device) for evaluating the wear resistance of enamel wire. - The test specimen is placed in a clamp, and the wear head with a fixed piano wire is used to sandwich the test specimen on the test bench, moving the wear head at a speed of 400±40 mm per minute while increasing the load to induce wear. - The force at which conductivity occurs between the test specimen and the piano wire due to wear is referred to as the breaking force. - By rotating the specimen 120 degrees and 240 degrees, three tests can be conducted using the same specimen. <Reference Standards> JIS-(C3003), C3216-3, IEC-60851-3, NEMA-C9.5 [Regarding Catalog Download] Please request the catalog through the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine (tensile and compression testing machine, AutoStrain) that performs tensile tests, compression tests, and three-point bending tests on plastic and rubber materials. - There are two types available, 5 kN and 10 kN, depending on the maximum load difference. - The test specimen is fixed in the upper and lower chucks, and tensile (compression, bending) load is applied until the stress of the specimen decreases at a constant speed or until a specified distance is traveled. - All operations of the test and verification of the test results are conducted via a touch panel. 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- A compression molding machine (mini test press) for producing vulcanized sheets of plastic and rubber. - The body is designed to be compact for use mainly in laboratories. - The upper plate can be adjusted and fixed to the optimal position using a handle, which enhances workability. 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products that do not have a separate catalog, please request the comprehensive catalog.

• Other measurement, recording and measuring instruments

- The handle meter method evaluates the rigidity and softness of paper, plastic film, and textiles. - A test specimen is placed on a sample table with a slot of specified width, and it is pressed down from above with a blade (pressure plate). - The resistance force experienced at that time is measured, and the rigidity-softness is calculated from the combined values of bending and sliding. <Reference Standards> JIS-L1096, TAPPI-(T498), J.TAPPI-No.34 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Other measurement, recording and measuring instruments

- This is a testing machine for evaluating the flame resistance of plastics (test chamber with ventilation hood, UL94 combustion test chamber, UL-94 testing machine). - It is equipped to perform horizontal burning tests (HB) or vertical burning tests (V-1, V-2) as standard. - The specimen is ignited using a burner, and the time is measured. The position of the burner can be adjusted from an external handle for safety, depending on the combustion state of the specimen. - Other combustion tests (5V, VTM, HBF, HF) can also be easily conducted using optional supporting fixtures. - In addition to the manual type, there is also an electric type available. - In the electric type, the position of the burner is adjusted using a jog dial controller according to the combustion state of the specimen during the test. - The touch panel provides voice guidance to navigate the operating procedures according to the testing method. <Reference Standards> UL-94, JIS-K6911, ASTM-D635, D3801, D4804, D5025, D5207, ISO-1210 【Regarding Catalog Download】 Please request the catalog from the related links below or through inquiries. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- It is a testing machine (combustion testing device) for conducting vertical combustion tests to evaluate the flame resistance of wires, cables, or cords. - This testing machine consists of a drafter, combustion device, and calibration device. - An indicator flag is attached to the test specimen and secured in the upper and lower chucks. - A burner with an adjusted flame is tilted at 20° to ignite the test specimen, and the ignition is repeated five times with 15 seconds of flame exposure followed by 15 seconds of flame cessation. The flame resistance is evaluated based on the degree of combustion of the indicator flag and the cotton placed underneath, as well as the flame combustion time of the test specimen. <Reference Standards> UL-1581, ASTM-D5025, D5207 [Regarding Catalog Download] Please request the catalog from the related links below or through inquiries. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine (bending test device, cable bending test device) for conducting strength tests on the bending performance of plugs (cable extraction parts). - A specified weight is suspended from a sample of appropriate length, and power is supplied. - The movable plate is reciprocated at a speed of 40 times per minute at angles of 60° to the left and right (counting each side as one time), and the evaluation of bending performance is conducted based on the breakage rate of the sample. - For PVC insulated cables, the weight is set to 0.5 kg, and the cable is bent to 90° to the left and right, performing bending movements at a speed of 60 times per minute, counting one complete bend at 180°. <Reference Standards> JIS-C3662-2, C8306, IEC-60227-2 【About Catalog Download】 Please request a catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a pendulum-type impact testing machine suitable for plastic materials. - By exchanging the hammer and anvil, both Charpy impact tests and Izod impact tests can be conducted. - The test is performed by attaching the test specimen to the anvil and swinging down the hammer. - By equipping the testing machine with a rotary encoder, the angle of the hammer's swing can be automatically read, and the test results can be automatically calculated. - You can choose between a digital specification (touch panel, PC) that saves data or an analog specification with a scale dial and pointer, which calculates impact strength from the hammer's swing angle indicated on the scale. - For this product, the specifications are configured by adding options, including the hammer, to the basic main unit. 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a pendulum impact testing machine that conducts Charpy impact tests and Izod impact tests in a cryogenic chamber. - The low-temperature chamber has two doors, allowing test specimens to be mounted from the outside while the inner door is closed, thereby reducing temperature changes inside the chamber. - This product can achieve ultra-low temperatures down to -50°C. <Reference Standards> JIS-K7110, K7111-1, ASTM-D256, D6110, ISO-179-1:2010, 180 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- By setting the test specimen in the cassette and simply entering the test conditions on the dedicated software, up to 210 test specimens can be measured continuously. - Since three types of hammers can be automatically exchanged, there is no interruption in testing due to hammer changes, allowing for continuous testing. - Automatic sample measurement and notch alignment can be performed in about 6 seconds. - It is possible to add a low-temperature chamber as an option. <Reference Standards> JIS-K7110, K7111-1, ASTM-D256, ISO-179-1, 180 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a pendulum impact testing machine that conducts Charpy impact tests and Izod impact tests in a low-temperature chamber. - The low-temperature chamber has two doors, allowing test specimens to be mounted from the outside while the inner door is closed, thereby reducing temperature changes inside the chamber. <Reference Standards> JIS-K7110, K7111-1, ASTM-D256, D6110, ISO-179-1:2010, 180 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine (repeated compression testing machine, polyurethane foam repeated compression testing machine, foam rubber repeated load compression testing machine) that conducts repeated compression residual strain tests on soft foamed materials such as polyurethane foam and latex foam using Method B (constant displacement method). - After measuring the thickness of the test specimen, it is placed between parallel plates and compressed to 50% of its original thickness at a rate of 60 times per minute, and this is repeated continuously for 80,000 cycles. - After that, the test specimen is removed and left for 30 minutes under specified conditions, and the thickness of the specimen is measured again. - The thickness reduction rate is calculated from the thickness before and after the test, which is then defined as the repeated compression residual strain. <Reference Standards> JIS-(K6382), K6400-4 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products that do not have a standalone catalog, please request the comprehensive catalog.

• Testing Equipment and Devices

- It can automatically perform an impact test in one cycle. - A cycle test can be conducted in a short time of 15 seconds. - The Charpy impact test is performed by inputting test conditions from the touch panel. - By using a cassette, up to 210 test specimens can be set at once. - The automatic transfer device enables "efficient and accurate installation in a short time." - It excels in the ability to create low-temperature environments, allowing for quick testing at low cost. <Reference Standards> JIS-K7111, K7111-1, ASTM-D256, D6110, ISO-179, 180 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

• Testing Equipment and Devices

- We will observe the growth of cracks due to rubber bending and evaluate durability. - We also offer L-shaped specimens for testing in a low-temperature chamber. - After cutting to the specified size, we will use a dedicated jig to drill a hole with a diameter of 2.5±0.01mm at a position of 62±2mm from one end to create the test specimen. - The test specimen will be attached to the testing machine and repeatedly bent from a horizontal position to 45° until either the length of the hole reaches 500%, the combined length of the hole and crack reaches 15mm, or the number of bends reaches 250,000. - The average number of bends required to increase the original hole length by 100% will be calculated until it reaches 500%, which will be used to determine durability. <Reference Standard> ASTM-D1052 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a bending testing machine that observes the growth of cracks due to the bending of rubber in a low-temperature chamber and evaluates durability. - The average number of bends is calculated for every 100% increase from the original length of the hole opened in the test specimen until it reaches 500%, which is used to determine durability. <Reference Standard> ASTM-D1052 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Other measurement, recording and measuring instruments

- This evaluates the bonding strength of PVB film fragments in composite safety glass used in vehicle bodies, etc. - The test specimen is fixed and moved in an S-shape at a constant pitch while a hammer delivers a constant impact force to shatter the glass, and the panmel value of the exposed PVB surface is assessed by grade. - The impact method uses a hammer drop mechanism with an auxiliary spring, and the impact force is adjustable via a spring screw adjustment. - Indoor lighting and a dry-fire prevention mechanism are standard features. 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine (Williams test) used to evaluate the wear resistance of vulcanized rubber and thermoplastic rubber. - It is mainly used for testing tires, shoe soles, and similar products. - Two flat test pieces fixed to a horizontal arm are pressed against the surface of a rotating abrasive material, which is positioned vertically, under a specified load to induce wear. - The wear weight is determined from the mass of the test pieces before and after the test, and the wear volume is calculated. <Reference Standards> JIS-K6264-2, ISO-4649 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a vinyl leather cloth cold resistance testing machine that uses a refrigeration method instead of dry ice. - It is a testing machine (cold resistance testing machine, cold resistance testing device) for conducting cold resistance tests on vinyl leather cloth, plastic, rubber-coated fabrics, etc. - The test specimen is fixed in the chuck of the specimen holder, and it is installed so that the specimen is positioned at the center of the anvil in the low-temperature chamber. - After installation in the low-temperature chamber, a drop weight is released after 5 minutes to check for any cracks in the test specimen. - By rotating the specimen holder, up to 6 specimens can be tested continuously. <Reference Standards> JIS-K6404-13, (K6404-13), K6772, ISO-4675 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Other measurement, recording and measuring instruments

- This is a testing machine (Mullen high-pressure testing machine, Mullen type testing machine, Mullen burst strength testing machine, Mullen burst degree testing machine) for evaluating the burst strength of paper and board, liners and cardboard, and rubber/plastic coated fabrics. - There are two types available: touch panel type and digital type. - The test specimen is placed on an elastic rubber diaphragm and clamped together with a tightening plate. - Pressure is applied to the test specimen at a specified speed through the rubber diaphragm, and the pressure at which the specimen tears is read as the burst strength. - Two types of pressure gauges can be selected: 2.0, 4.5, or 7.0 MPa. - Depending on the thickness of the test specimen and the burst strength, low-pressure and high-pressure types can be selected. 304 Mullen high-pressure burst degree testing machine 305 Mullen low-pressure burst degree testing machine <Reference Standards> JIS-K6404-11, P8112, P8131, TAPPI-T403, T807, T810, ISO-2758, 2759 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine (Mullen low-pressure testing machine, Mullen type testing machine, Mullen burst strength testing machine, Mullen burst degree testing machine) for evaluating the burst strength of paper and board, liners and cardboard, and rubber/plastic coated fabrics. - There are two types available: touch panel type and digital type. - The test specimen is placed on an elastic rubber diaphragm and clamped together with a tightening plate. - Pressure is applied to the test specimen at a specified speed through the rubber diaphragm, and the pressure at which the specimen ruptures is recorded as the burst strength. - Two types of pressure gauges can be selected: 2.0, 4.5, and 7.0 MPa. - Depending on the thickness of the test specimen and the burst strength, low-pressure and high-pressure types can be selected. 304 Mullen high-pressure burst degree testing machine 305 Mullen low-pressure burst degree testing machine <Reference Standards> JIS-K6404-11, P8112, P8131, TAPPI-T403, T807, T810, ISO-2758, 2759 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine (bending resistance testing machine, flexible printed circuit board bending fatigue testing machine) used to evaluate the bending resistance of plastic films and FPCs (flexible printed circuit boards) in a low-temperature bath. - The test specimen is bent to a specified bending radius as defined in individual standards and fixed between parallel fixed and movable plates while current is passed through the specimen to prepare it for testing. - The movable plate is then moved back and forth at a specified speed to bend the test specimen, continuing until the current flowing through the specimen stops, at which point the number of bends is recorded. - The number of cycles is 4 cycles (2 simultaneous drives × 2). <Reference Standard> JIS-C5016 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine (bending resistance testing machine, flexible printed circuit board bending fatigue testing machine) used to evaluate the bending resistance of plastic films and FPCs (flexible printed circuit boards). - The test specimen is bent to the specified bending radius as defined in individual standards and fixed between a parallel fixed plate and a movable plate while current is passed through the specimen to prepare for the test. - The movable plate is moved back and forth at a specified speed to bend the test specimen, continuing until the current flowing through the specimen stops, and the number of bends up to that point is recorded. - We also offer the model [306-L type] for testing in a low-temperature chamber. <Reference Standard> JIS-C5016 <Regarding Catalog Download> Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

• Testing Equipment and Devices

- This is a testing machine (folding resistance testing machine, MIT testing machine, MIT type testing machine, MIT type folding resistance testing machine, folding fatigue testing machine) used to evaluate the folding strength of materials such as paper and board, plastic film, and flexible printed circuit boards (FPC). - It is also used for automatic folding tests of metal foils such as aluminum. - The test involves applying a specified load while pulling the specimen and folding it to the left and right at a specified speed of 135° until the specimen breaks. - The folding strength is calculated from the number of back-and-forth folds until breakage occurs. - The load is applied using a dead weight system. - There is also a model [307-L type] for conducting tests in a low-temperature chamber. <Reference Standards> JIS-C5016, P8115, R3420, ASTM-D2176, TAPPI-T511, ISO-5626 【About Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

• Testing Equipment and Devices