エクセリ List of Products and Services

The HM-250 (HM250) is a waterproof speaker microphone manufactured by Icom. It has a high dust and water resistance rating equivalent to IP67. The bottom part is equipped with a φ3.5mm earphone jack, so please use it in combination with the following earphones: - Ear-hook type earphones black SP-16B, SP-16BW - Tube earphones SP-27 - Ear-hook earphones SP-29 - Small magnetic earphones SP-40 It is equipped with a sub PTT button, allowing you to distinguish between the main PTT button (LTE mode) and the sub PTT button (SR mode) with one action. The top part has a top button that can be used as a function button by setting it in advance with cloning software. 【Compatible Models】 IP radios, digital general business radios, analog general business radios, GPS location management systems - IP700S / IP700SV / IP700SU / IP700SV BT / IP700SU BT For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools

● HX826 (HX-826) is a work communication transceiver made by Wave CSR. ● With hands-free simultaneous calling, you can talk while listening just like on a phone. ・【Simultaneous calling with 5 people】You can connect to a master unit for multi-party simultaneous calling. A total of 5 parties can communicate simultaneously with 1 master unit R9020 and 4 sub-units HX826/HX827. * It is also possible to have a total of 17 parties communicating simultaneously with 1 master unit RP848, 2 master units R9020, and 16 sub-units HX826. ・【Simultaneous calling with 3 people】The portable units HX826/HX827 also have a master unit mode, allowing communication with just HX826/HX827. By using one HX826/HX827 in master unit mode, a maximum of 3 parties can communicate simultaneously with 1 master unit and 2 sub-units. This allows for easy and flexible 3-party simultaneous calling without a fixed master unit. ● It is a radio with both IP65 and IP68 waterproof and dustproof features, making it resistant to submersion and direct water spray. ● The manufacturer's warranty period is (under investigation). * For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Other network tools

● The HX825 (HX-825) is a specific low-power transceiver manufactured by wave CSR. ● The communication method is simultaneous communication. ・ Two people can communicate simultaneously. ・ You can talk while listening hands-free, just like on a phone. ・ There is no time limit for calls. ・ It automatically searches for available channels using MCA (Multi-Channel Access), eliminating the hassle of finding free channels. ・ You can make a group call to everyone on the same channel. ・ Connection is established simply by pressing the call button first. ● It is a radio device with both IP65 and IP68 waterproof and dustproof features, making it resistant to submersion and direct water spray. * For details on waterproof, dustproof, and explosion-proof standards, please refer here. ● The battery life is as follows: ・ At a transmission output of 10mW: When using CBP825LI: Approximately 20 hours When using AA alkaline batteries: Approximately 25 hours ・ At a transmission output of 1mW: When using CBP825LI: Approximately 10 hours When using AA alkaline batteries: Approximately 15 hours ● The manufacturer's free warranty period is (under investigation). * For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Other network tools

● The EHC-40 (EHC40) is a hard case made by Alinco. ● It protects the Alinco simultaneous communication specific low-power transceiver DJ-P400 from scratches and dirt. ● It comes with a strap, allowing it to be worn over the shoulder. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, feel free to contact our company.

• Other network tools

●EDC-331R (EDC331R) is a single charger stand made by Alinco. ●It is a charging stand that can charge the Alinco simultaneous communication specific low power transceiver DJ-P400 as well as the battery pack EBP-114 individually. ●The charging time for EBP-114 is approximately 3.5 hours. ●You can connect up to 4 units and charge them with a single outlet. ●It can be charged using a household power supply of AC100V. ●It charges by connecting to a separately sold AC adapter. ・You can connect and charge up to 4 units by combining with the connecting AC adapter EDC-162. ・You can charge it as a single charger by combining with the AC adapter EDC-287. ●There is also a single charger EDC-331A that comes as a set with EDC-331R and AC adapter EDC-287. *For more details, please feel free to contact us.

• Other network tools

●EDC-331A (EDC331A) is a single charger set manufactured by Alinco. ●The Alinco simultaneous communication specific low-power transceiver DJ-P400 can also be charged with the lithium-ion battery pack EBP-114 individually. ●It can charge the EBP-114 in approximately 3.5 hours. ●It can be charged from a household power supply of AC100V. ●This is a set product that includes the single charging stand EDC-331R and the AC adapter EDC-287. *For more details, please feel free to contact us.

• Other network tools

● The DJ-P400 (DJP400) is a specific low-power transceiver manufactured by Alinco. ● It is a simultaneous communication radio. ● It features IP67 dustproof and waterproof capabilities, making it highly resistant to water and dust. The accessory connection uses a screw-type plug, ensuring IP67 compliance even when using an earphone microphone. ● It supports accessories such as a dedicated wireless microphone using Bluetooth technology. ● The channel settings for 3/4 party communication are preset, making it easy to operate by simply selecting and setting one number. ● It offers ample operating time, with 85 hours for alternating communication, 19 hours for simultaneous two-party communication, and 14 hours for simultaneous three/four-party communication. ● Additionally, it is equipped with a "Free Channel" function that automatically searches for available channels every time it is powered on, after a one-time pairing operation. ● It is suitable for tasks where coordination is important, such as crane rigging and drone operation. ● It implements the latest noise cancellation technology, allowing for clear voice transmission even in noisy environments. ● The manufacturer's warranty period is currently under investigation. * For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Other network tools

● BP-311 (BP311) is a lithium-ion battery pack manufactured by Icom. ● It can be used with the Icom IP210H. ● The operational time of the battery is as follows: - IP radio mode: approximately 18 hours - WLAN radio mode: approximately 29 hours (communication mode: WLAN) / approximately 14 hours (communication mode: LTE) - IP phone mode: approximately 6.5 hours (during continuous calls) - IP radio + IP phone mode: approximately 15 hours - WLAN radio mode + IP phone mode: approximately 30 hours (communication mode: WLAN) / approximately 12 hours (communication mode: LTE) * When using the included battery pack BP-311, the cycle is repeated at a ratio of transmit 5, receive 5, standby 90, Bluetooth: OFF, backlight: OFF. ● It can be charged in about 2.5 hours when combined with the separately sold BC-265 simultaneous charging charger. ● The battery capacity is 3.6V/3280mAh. 【Compatible Models】 IP radios and WLAN transceivers - IP210H For extremely low prices on earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

• Other network tools

● LC-201 (LC201) is a carrying case made by Icom (ICOM). ● It is a dedicated carrying case for the IP wireless device/WLAN transceiver (wireless mobile IP phone) IP210H. ● It protects the IP210H from dirt and impact. ● You can operate the keys and make calls on the IP210H while it is in the LC-201, and charging using the side USB port is also possible. ● It is compatible only when the IP210H is equipped with the lithium-ion battery pack BP-311. ● It has two D-rings on the back, allowing for the attachment of a separately sold carrying strap. 【Compatible Models】 IP wireless device/WLAN transceiver (wireless mobile IP phone) ・IP210H For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

• Other network tools

● BC-265 (BC265) is a simultaneous charging type charger manufactured by ICOM. ● It is a charger for the IP210H IP radio/WLAN transceiver (wireless mobile IP phone). ● With one charger, you can charge the main unit IP210H while simultaneously charging a spare battery BP-311. ● It is capable of connecting and charging up to 4 units at once. ● It is used in combination with a separately sold AC adapter. - For connecting and charging 5 units: BC-228 ● The charging time is approximately 2.5 hours. *For more details, please feel free to contact us.

• Other network tools

The IP210H (IP-210H) is a wireless mobile IP phone manufactured by Icom. It features functions of an IP radio (LTE), WLAN transceiver, and IP telephone (landline/internal phone). It is the successor to the mobile IP phone IP200H. It can be used as a landline (outgoing and incoming calls) or internal phone via a wireless LAN or LTE network. The IP radio (LTE) is compatible with traditional Icom IP radios. The WLAN transceiver is also compatible with traditional Icom WLAN transceivers. - IP100H - IP110H It has a design that makes it easy to use as a radio, with an antenna, volume knob, and emergency call button. It is rugged and meets the U.S. military MIL-SPEC MIL-STD-810G standards. With one push, you can broadcast to pre-registered terminals. It is equipped with GPS functionality (only when a SIM is installed). The manufacturer offers a one-year free warranty. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Other network tools

The EP302 OAHL-L3.5 (EP302OAHLL35) is an open-air type (L) earphone with an ear hook from Yaesu Musen (Standard Horizon). The color of the earphone varies in two colors, and the product model number changes depending on the cable type. - Earphone (straight cable) open-air type (L) black: EP302 OAHL-L3.5(T50B) - Earphone (straight cable) open-air type (L) gray: EP302 OAHL-L3.5(T50G) - Earphone (coiled cable) open-air type (L) black: EP302 OAHL-L3.5(C50B) - Earphone (coiled cable) open-air type (L) gray: EP302 OAHL-L3.5(C50G) This is an earphone for the Standard Horizon specific low-power transceiver SRFD10. It is a large open-air type earphone with an ear hook that plugs directly into the radio body. The size of the earphone jack is 3.5mm. The length of the microphone cable is approximately 50cm. It features a twisted pair earphone cable. *For more details, please feel free to contact us.

• Other network tools

The EP301 OAHS-L3.5 (EP301OAHSL35) is an open-air type earphone with an ear hook from Yaesu Musen (Standard Horizon). The product model number changes based on the color of the earphone and the shape of the cable. - Earphone (straight cable) open-air type with ear hook (S) black: EP301 OAHS-L3.5(T50B) - Earphone (straight cable) open-air type with ear hook (S) gray: EP301 OAHS-L3.5(T50G) - Earphone (coiled cable) open-air type with ear hook (S) black: EP301 OAHS-L3.5(C50B) - Earphone (coiled cable) open-air type with ear hook (S) gray: EP301 OAHS-L3.5(C50G) This is an earphone for the Standard Horizon specific low-power transceiver SRFD10. It is a type that directly plugs into the radio body and features an open-air earphone with an ear hook. The size of the earphone jack is 3.5φ. The length of the microphone cable is approximately 50cm. It has a twisted pair earphone cable. *For more details, please feel free to contact us.

• Other network tools

●EDC-131A (EDC131A) is a single charging dock set made by Alinco. ●This product is a set that includes the single charging dock EDC-131 and the AC adapter EDC-122. ●You can charge the lithium-ion rechargeable battery pack EBP-60 while it is attached to the transceiver. ●When not in use for charging, you can plug the included AC adapter EDC-122 into the external power jack of the transceiver to provide constant AC power. ●It can be powered from a household AC 100V source. ●The approximate charging time for the lithium-ion battery pack EBP-60 is about 3 hours. ●The length of the AC cable is approximately 180 cm. *For more details, please feel free to contact us.

• Other network tools

●EDC-131 (EDC131) is a single charging station manufactured by Alinco. ●When used in combination with the separately sold AC adapter EDC-122, it fully charges the lithium-ion battery pack EBP-60 in about 3 hours. ●Simply plug the EDC-122's plug into the AC connection connector on the right side of the main unit for easy use. ●It can be powered from a household AC 100V power supply. *For more details, please feel free to contact us.*

• Other network tools

●EDC-115 (EDC115) is a single charger set manufactured by Alinco. ●It is a single charger set that can charge certain specific low-power transceivers made by Alinco. ●It comes standard with a dedicated AC adapter. ●It can charge the battery pack EBP-25NH or EBP-25N while attached to the transceiver body. *For more details, please feel free to contact us.*

• Other network tools

●EDC-167A (EDC167A) is a twin charger set manufactured by Alinco. ●It is a charger that can charge up to two transceivers with a single AC adapter. ●It comes standard with the AC adapter EDC-122. ●You can charge the lithium-ion rechargeable battery pack EBP-60 while it is attached to the transceiver. ●When not in use for charging, you can operate the transceiver by plugging only the AC adapter EDC-122 into the external power jack. ●By using the separately sold twin connection charging adapter EDC-162, you can connect up to three units. *For more details, please feel free to contact us.

• Other network tools

The EDC-109J (EDC109J) is a twin charger set manufactured by Alinco. It can charge up to 2 transceivers simultaneously. It comes standard with the AC adapter EDC-110. It is possible to charge the battery pack, either the nickel-metal hydride battery EBP-25NH or the nickel-cadmium battery EBP-25N, while attached to the transceiver body. *For more details, please feel free to contact us.

• Other network tools

● The EDC-167R (EDC167R) is a twin connection stand made by Alinco. ● It is a twin charger that can charge up to two transceivers with a single AC adapter. ● It can charge the lithium-ion rechargeable battery pack EBP-60 while it is attached to the transceiver body. ● It is used in combination with a separately sold AC adapter. * You can connect the EDC-167R to the large AC adapter EDC-162 for connected charging, allowing you to charge up to four EDC-167Rs together. * You can also connect the AC adapter EDC-122 to the EDC-167R without linking it for charging. In this case, the EDC-167R cannot be used in a linked configuration. ● Approximate charging time: Lithium-ion battery pack EBP-60: about 3 hours * For more details, please feel free to contact us.

• Other network tools

●EDC-155R (EDC155R) is a charging stand for connecting multiple units made by Alinco (ALINCO). ●Using the separately sold single connection charging AC adapter EDC-156, you can connect and charge up to 6 EDC-155R units simultaneously. ●Batteries can be charged while attached to the transceiver. ●Approximate charging time: about 3 hours *When charging the lithium-ion battery pack EBP-70 ●Connection brackets and cables are also included. *For more details, please feel free to contact us.

• Other network tools

The EDC-158A (EDC158A) is a twin charger set manufactured by Alinco. It can charge up to 2 transceivers at once. It comes standard with the AC adapter EDC-287. Note that the AC adapter at the time of release was EDC-122, but it was changed to EDC-287 in July 2019. You can charge the lithium-ion battery pack EBP-70 while it is attached to the transceiver body. By using the separately sold twin connection charging adapter EDC-162, you can connect up to 4 units (equivalent to 8 transceivers) in total. For more details, please feel free to contact us.

• Other network tools

●EDH-46 (EDH46) is a dry battery case made by Alinco (ALINCO). ●Using three commercially available AA alkaline batteries, it can operate the multi-mode receiver DJ-X100 for up to approximately 7 hours. *Measured with GPS and FM radio off / BS on, receiving for 6 seconds and standby for 54 seconds. Since the DJ-X100 is a digital receiver, the initial setting has the battery save (BS) off. If BS is not turned on, the operation time will be reduced by about 30%. 【Compatible Models】 Receiver ・DJ-X100 Specific low-power transceiver ・DJ-P400 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools

●EDC-179A (EDC179A) is a twin charger set manufactured by Alinco. ●It can charge up to 2 transceivers simultaneously. ●It comes standard with the AC adapter EDC-287. *The AC adapter at the time of release was EDC-122, but it was changed to EDC-287 in June 2019. ●It is possible to charge the nickel-metal hydride battery EBP-179 while it is attached to the transceiver. ●If you wish to connect multiple chargers, please use the separately sold twin connection charging adapter EDC-162. You can connect up to 5 units (equivalent to 10 transceivers). ●The charging status can be easily checked with the following LED indicators: ・Red light: Charging ・Green light: Complete ・Green blinking: Discharging *For more details, please feel free to contact us.

• Other network tools

●EDC-179R (EDC179R) is a twin connection stand made by Alinco (ALINCO). ●It is a twin charger that can charge up to two transceivers with a single AC adapter. ●It can charge the nickel-metal hydride battery EBP-179 while it is attached to the transceiver body. ●It is used in combination with a separately sold AC adapter. *You can connect the EDC-179R to the large AC adapter EDC-162 for connected charging, allowing you to charge up to five EDC-179Rs. *You can also connect the AC adapter EDC-122 to charge without linking the EDC-179R. In this case, the EDC-179R cannot be used in a linked configuration. ●Approximate charging time Nickel-metal hydride battery EBP-179: about 6 hours *For more details, please feel free to contact us.

• Other network tools

The EDC-158R (EDC158R) is a charging stand for connecting transceivers made by Alinco. It can charge up to two transceivers at once. By combining it with the large AC adapter EDC-162, you can connect up to four EDC-158R units (equivalent to eight transceivers) for charging. The approximate charging time is as follows: Lithium-ion battery pack EBP-70: about 2.5 hours. *For more details, please feel free to contact our company.

• Other network tools

●EDC-180A (EDC180A) is a single charger set manufactured by Alinco. ●It is a charger set that can charge the specific low-power transceiver DJ-P45 made by Alinco. ●It comes with a dedicated AC adapter EDC-122. ●It is a single charger that can charge one transceiver. ●The approximate charging times are as follows: ・EBP-77: about 2.5 hours ・EBP-78: about 4 hours *For more details, please feel free to contact us.

• Other network tools

●EDC-182 (EDC182) is a charging stand manufactured by Alinco. ●It is a dedicated charging stand that can charge specific low-power transceivers from Alinco, such as DJ-CH20, DJ-CH27, DJ-CH201, DJ-CH271, DJ-CH202, and DJ-CH272. ●It can charge both the battery alone and the transceiver when equipped. ●Approximate charging time: about 3 hours *When charging the lithium-ion battery pack EBP-80. *For more details, please feel free to contact us.

• Other network tools

●EDC-181A (EDC181A) is a single charger set manufactured by Alinco. ●It can charge the specific low-power transceivers compatible with Alinco listed below. ●It comes standard with the AC adapter EDC-139. ●It can charge both the nickel-hydride battery EBP-179 alone and when equipped with the transceiver. ●It features a refresh function to prevent memory effect. ●The charging status can be easily checked with the following LED indicators: - Red light: Charging - Green light: Charging complete - Green blinking: Discharging *For more details, please feel free to contact us.

• Other network tools

●EDC-184A (EDC184A) is a single rapid charger set manufactured by Alinco. ●The AC adapter EDC-139 is also included as a standard set. ●It can charge the lithium-ion battery pack EBP-70 while it is set in specific low-power transceivers made by Alinco, as well as charge the EBP-70 alone. ●Approximate charging time: about 2.5 hours. *When charging the lithium-ion battery pack EBP-70 ●Equipped with an LED lamp to check the charging status. - Green: Charging complete - Red: Charging *For more details, please feel free to contact us.

• Other network tools

The EDC-185A (EDC185A) is a single charger set manufactured by Alinco. It is capable of charging specific low-power transceivers such as the DJ-PX31, DJ-TX31, DJ-RX31, DJ-PX3, and DJ-RX3. A compact AC adapter, EDC-139, is included as standard. It charges the nickel-hydride battery EBP-179 in approximately 6 hours. It can charge in both the battery-only and radio-equipped states. It features a battery refresh button to eliminate the memory effect of nickel-hydride batteries and extend battery life. *For more details, please feel free to contact us.*

• Other network tools

●EDC-186A (EDC186A) is a twin charger set manufactured by Alinco. ●EDC-186A is a set product that includes the twin charging stand EDC-186R and the dedicated AC adapter EDC-139 (not connectable). *EDC-186A is the model number that combines EDC-186R and EDC-139. ●It can charge specific low-power transceivers made by Alinco. ●The charging status can be easily identified by the color of the following LED lamps: - Red light: Charging - Green light: Complete - Green blinking: Discharging ●It can be charged in both states: with the battery alone or with the transceiver attached. ●Equipped with a battery refresh button to eliminate memory effect and prolong battery life. *For more details, please feel free to contact us.

• Other network tools

● The EDC-186R (EDC186R) is a twin charging stand made by Alinco. ● It can charge specific low-power transceivers from Alinco, such as DJ-PX31, DJ-TX31, DJ-RX31, DJ-PX3, and DJ-RX3. ● An AC adapter sold separately is required for charging. ・ Up to 5 EDC-186R units can be linked together to charge 10 transceivers: Twin connection charging AC adapter EDC-162 ・ The EDC-186R can also be used as a single charger to charge 2 transceivers: Single charging compact AC adapter EDC-139 ● The charging status can be easily identified by the color of the LED lamps: ・ Red: Charging ・ Green: Completed ・ Green blinking: Discharging ● Estimated charging time: Approximately 6 hours ● It can be charged in both battery-only and radio-equipped states. ● Equipped with a battery refresh button to eliminate memory effect and prolong battery life. *For more details, please feel free to contact us.

• Other network tools

●EDC-196R (EDC196R) is a single connection charging stand made by Alinco. ●It can charge Alinco's digital simple radios. ●When used as a single charger, a separate AC adapter for single use, EDC-283, is required. ●When used as a connected charger, a separate AC adapter for connected chargers, EDC-175, is required. *Up to 6 EDC-196R units can be connected together for use. ●You can charge either the radio itself or just the battery. ●Approximate charging times: - EBP-81: about 5 hours - EBP-82: about 3.5 hours - EBP-89: about 6 hours ●Equipped with an LED lamp that allows you to check the charging status. 【Compatible Models】 Digital Simple Radio Registered Stations - DJ-DP50H - DJ-DP50HB Digital Simple Radio Licensed Stations / Analog Simple Business Radios - DJ-BU50AD *For more details, please feel free to contact us.

• Other network tools

●EDC-207A (EDC207A) is a single charger set manufactured by Alinco. ●It charges the Alinco specific low-power transceiver DJ-PX5. ●This is a value set product that includes the single connection charging stand EDC-207R and the dedicated AC adapter EDC-287. ●It can charge the built-in Li-Ion battery of the DJ-PX5. ●Equipped with an LED lamp that allows for easy confirmation of the charging status. ●Estimated charging time: 3 hours 【Compatible Models】 Specific low-power transceiver ・DJ-PX5 ・DJ-PX7 *For more details, please feel free to contact us.

• Other network tools

The AP-9600 (AP9600) is a wireless access point manufactured by Icom. It is used to connect Icom's WLAN transceivers IP100H (discontinued), IP110H, and remote communicator IP100FS to a network via wireless LAN. Compared to the previous model AP-9500#01, it has the following advantages: - Compliance with Wi-Fi 6 (IEEE802.11ax) enables ultra-fast communication at 2.4Gbps. - Supports the robust security standard WPA3. It complies with the latest Wi-Fi 6 (IEEE802.11ax) standard, achieving ultra-fast communication of 2402Mbps (theoretical value at 80MHz). It supports dual-band operation with 20 channels in the 5GHz band (W52/W53/W56) and 13 channels in the 2.4GHz band. The 5GHz band includes channel 144, allowing for smooth communication that avoids congested channels and does not interfere with each other. *According to radio wave regulations, W52/W53 channels can only be used indoors, while W56 channels can be used outdoors. *For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs
• Other network tools

●EDC-277R (EDC277R) is a twin charger stand made by Alinco. ●It is a twin charger stand that can be used with digital simple radios and small area radios. ●An AC adapter sold separately is required. 1. Large AC adapter for connected charging EDC-162 or AC adapter for twin charger stand EDC-262 *Up to 4 EDC-277R units can be connected. 2. Small AC adapter EDC-222 *Can be used as a single charger. ●Charging is possible in both states: with the battery alone or with the radio equipped. *For more details, please feel free to contact us.

• Other network tools

● The EDC-280 (EDC280) is a single charging stand manufactured by Alinco. ● It is used for charging Alinco's digital simple radios and small area radios. ● Please use it in combination with a separately sold AC adapter. - Dedicated AC adapter EDC-222 for DJ-BS10 - Dedicated AC adapter EDC-239 for DJ-DP10 ● It can charge both the battery alone and when the radio is equipped. ● It has an LED lamp that allows you to check the charging status. ● Charging time estimates: - Lithium-ion battery pack (1000mA) EBP-177: 2.5 hours - Lithium-ion battery pack (1800mAh) EBP-178: 4 hours *For more details, please feel free to contact us.

• Other network tools

●EDC-295R (EDC295R) is a connection charging set manufactured by Alinco. ●EDC-295R is a set product that includes the charging stand EDC-295 and the connection cable UX1615S. ●When combined with the Alinco single charger set EDC-295A, it can charge up to four devices simultaneously, such as the wireless earphone microphone EME-80BMA and the specific low-power transceiver DJ-PX10. ●Please purchase EDC-295R as an expansion charging base for EDC-295A (which comes with charging cable EDS-37 and EDC-300). ●It can be easily used by simply connecting EDC-295R to EDC-295A with the included connection cable. ●The product with the charging USB cable UX1647 included is the charging stand EDC-295A. ●The charging terminal is microUSB. ●The charging times are as follows: ・EME-80BMA: approximately 2 hours ・EME-80WMA: approximately 2 hours ・DJ-PX10: approximately 2 hours *For more details, please feel free to contact us.

• Other network tools

●EDC-296 (EDC296) is a 10-port rapid charger manufactured by Alinco. ●It is a rapid charger that can charge up to 10 Alinco wireless earphone microphones (EME-80BMA) simultaneously. ●It can be used with the separately sold charging set EDC-300K (which includes the AC adapter EDC-300 and charging cable UA0105) with a household AC 100V power supply. ●Charging is easy; simply plug the wireless earphone microphone into the charging port. ●The charging time is approximately 2 hours. ●It is compact and elongated, allowing for installation without taking up much space. 【Compatible Models】 Specific low-power transceiver ・DJ-PX10 *For more details, please feel free to contact us.

• Other network tools

●EDC-300K (EDC300K) is a charging set manufactured by Alinco. ●It is a product that includes the AC adapter EDC-300 for charging and the DC cable UA0105. ●By combining the EDC-300K with the 10-port rapid charger EDC-296, you can charge up to 10 units of the Alinco specific low-power transceiver DJ-PX10 simultaneously. ●When combined with the separately sold charging stand EDC-308R, you can charge up to 4 units of the Alinco EMS-87B, EMS-87W, EMS-87BNC, and DLS-01 simultaneously. ●When combined with the separately sold linking charging set EDC-295R, you can charge up to 4 units of EME-80WMA and EME-80BMA simultaneously in about 2 hours. ●It can be powered from a household AC 100V power supply. ●The cable length is approximately 115 cm. 【Compatible Models】 Specific low-power transceiver ・DJ-PX10 Loudspeaker ・DLS-01 *For more details, please feel free to contact us.

• Other network tools

●EDC-311A (EDC311A) is a single charger set manufactured by Alinco. ●It can charge specific low-power transceivers made by Alinco. ●This single charger set includes the single charging stand EDC-311R and the charging adapter EDC-287. *Please note that a connecting cable is not included. ●If using in conjunction, please purchase the charging stand EDC-311R. ●It can fully charge the nickel-metal hydride battery EBP-179 in about 6 hours. ●The battery can be charged either on its own or while attached to the charger. ●It can be powered from a household AC 100V power supply. ●The length of the AC cable is approximately 1.8m. 【Compatible Models】 Specific low-power transceivers ・DJ-P321 ・DJ-P322 *For more details, please feel free to contact us.

• Other network tools

●EDC-311R (EDC311R) is a single charger stand made by Alinco. ●By combining it with the separately sold AC adapter EDC-287, you can charge specific low-power transceivers made by Alinco. ●With one AC adapter EDC-287, you can connect up to four charging stands EDC-311R using the included linking cable for charging. ●It can fully charge a nickel-hydride battery EBP-179 in about 6 hours. ●The battery can be charged either alone or while attached to the charger. ●It can be powered from a household AC100V power source. 【Compatible Models】 Specific low-power transceivers ・DJ-P321 *Used in combination with EDC-287 ・DJ-P322 *Used in combination with EDC-287 *For more details, please feel free to contact us.

• Other network tools

The EDC-320R (EDC320R) is a twin charging stand manufactured by Alinco. It can charge two lithium-ion batteries, EBP-108, simultaneously when combined with the separately sold AC adapter EDC-122. By using the included connection cable UX1599, you can connect up to three EDC-320Rs and charge up to six battery packs at the same time. It can fully charge the EBP-108 in approximately 7 hours. The connection of the EDC-320R can be easily made without tools. It can be powered from a household AC 100V power supply. You can easily understand the charging status with the following charging lamp colors: - Green: Charging complete - Orange: Charging in progress 【Compatible Models】 Specific low-power transceiver - DJ-PHM20 (to be used in combination with AC adapter EDC-122) *For more details, please feel free to contact us.

• Other network tools

●FLM-02 (FLM02) is a flexible microphone made by EKO TECHNO. ●It is a microphone for radios. ●It uses a unidirectional microphone, making it suitable for use in noisy environments. * A unidirectional microphone is one that picks up sound only from a specific direction. ●The arm of the microphone can be bent freely. ●You can also add a magnet to the PTT section as an option. For super cheap sales of earphone microphones and batteries, leave it to Excelli. For super cheap sales of earphone microphones and batteries, leave it to Excelli.

• Other network tools

The B-A10ac (BA10ac) is a BRIDGECOM speaker (AC adapter version) made by Bear (B-EAR). It is a speaker for the BRIDGECOM X5 (model number BM-X5), BRIDGECOM GS-X5 (model number BM-GSX5), BRIDGECOM X10 (model number BM-X10), BRIDGECOM X10 Compact (model number BM-X10CP), and BRIDGECOM X10 Athlete (model number BM-X10AT). Connect the speaker to the radio unit using the included audio cable B-F11. It operates on a household power supply of AC100V. The sound is louder than the previous model B-A07. It has a built-in amplifier. If the radio unit has two 3.5mm terminals, you can use an earphone microphone or headset while an external speaker is connected. You can also attach it to a car or other surfaces using the separately sold speaker-specific magnet B-F10. For extremely low prices on earphone microphones, batteries, and more, leave it to Excelli.

• Other network tools