原貿易 List of Products and Services

The "19494" is a portable charge plate monitor that can be used for the regular verification of ionizers in accordance with ANSI/ESD SP3.3 and ESD TR53. It measures the charge neutralization capability of positive/negative charges within the coverage area of the ionizer. The screen can be viewed from various angles. Equipped with a zero adjustment button, it enhances measurement accuracy and reproducibility, and is calibrated according to standards and procedures approved by NIST. 【Features】 ■ Handheld device capable of measuring the offset voltage and neutralization time of ionizers ■ Measures decay times from ±1000V to ±100V ■ 180-degree rotating head with a plate approximately 7cm x 3cm ■ Zero adjustment button ■ Uses two AA batteries *For more details, please refer to the PDF document or feel free to contact us.

• EMC/Static electricity measuring equipment
• Other measurement, recording and measuring instruments
• Anti-static products

The environmentally friendly anti-static film and anti-static bag 'STAT-3S Bio' incorporates plant-based plastics into the sustainable anti-static 'STAT-3S', reducing CO2 emissions and considering the environment. It has low humidity dependence and no concerns about the migration of anti-static agents. The Japan Bio-Plastics Association certification mark can be printed on bags and sheets. By printing the certification mark, you can appeal to customers that you are addressing environmental issues. ★ At Haratoueki, we offer a wide range of anti-static and electrostatic countermeasure products, and we provide on-site diagnosis and measurement demonstrations for static electricity. ★ 【Features】 ■ Incorporates plant-based plastics into the sustainable anti-static 'STAT-3S' ■ Reduces CO2 emissions and considers the environment ■ Maintains the anti-static functionality of 'STAT-3S' ■ Japan Bio-Plastics Association certification mark can be printed on bags and sheets ■ Printing the certification mark allows you to appeal to customers that you are addressing environmental issues * For more details, please refer to the PDF document or feel free to contact us.

• Anti-static products

- Ideal for cleaning small items - Strong resistance to chemical agents, allowing the use of almost all solutions - Easy and quick switch from liquid to air even during spraying - The tank rotates approximately 360 degrees, making it usable at any angle - Uses compressed air, providing superior cleaning performance compared to spray cans - Does not use high-pressure gas - No empty cans are generated - Adjustable spray pressure and solvent amount - Economical with reduced consumption - Robust design for stability - Product introduction videos are available in the catalog

• Hand cleaner
• High pressure cleaner
• Other cleaning tools

Introducing our single-wire continuous monitor calibration device '98221'. You can check the test limits of Desco's continuous monitor (single-wire) at the factory without having to transport the monitor out of the workspace. Calibrated according to NIST-approved procedures and standards. With a new extruded aluminum cover, it protects the tester from electrical interference during use. 【Features】 ■ New extruded aluminum cover ■ Protects the tester from electrical interference during use ■ Comes with NIST calibration certificate ■ Allows you to check the test limits of Desco's continuous monitor (single-wire) at the factory *For more details, please refer to the related link page or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Other electric meters

The "50547" is a relay box for single-wire constant monitoring. It is an accessory for the constant monitor "19325" and is used to manage electronic door locks, lights, buzzers, etc. The relay activates when a malfunction is detected during constant monitoring. 【Features】 ■ Accessory for the constant monitor "19325" ■ Used to manage electronic door locks, lights, buzzers, etc. ■ Relay activates when a malfunction is detected during constant monitoring *For more details, please refer to the related link page or feel free to contact us.

• Other security
• Other electric meters

The "50005" is a device used in conjunction with a resistance measuring instrument. For example, it measures surface resistance according to the measurement methods described in the ANSI/ESD STM11.11 packaging standard, such as the DESCO 19787 digital surface resistance meter, and in accordance with the surface resistance of conductive materials as per ANSI/ESD S541. Additionally, this product can also be used to measure the resistance of ESD packaging, such as electrostatic shielding and other bags. 【Features】 ■ Can measure the resistance capacity of conductive materials using a flat conductive metal plate (sold separately) ■ Can also be used to measure the resistance of ESD packaging, such as electrostatic shielding and other bags ■ Used in conjunction with a resistance measuring instrument *For more details, please refer to the related link page or feel free to contact us.

• probe

The "35852" is a high-performance 120 VAC motor designed for static electricity control. It removes lead, glass, pollen, soot, and other particles with a 0.3-micron HEPA filter. All components, including the hose, suction inlet, brush, and crevice nozzle, are treated for static electricity prevention. Additionally, weighing only 2.95 kg, it is suitable for field use. It can be safely used for cleaning in ESD-protected areas such as workbenches, mounts, and routers. 【Features】 ■ Removes lead, glass, pollen, soot, and other particles with a 0.3-micron HEPA filter ■ All components, including the crevice nozzle, are treated for static electricity prevention ■ Lightweight at 2.95 kg, making it suitable for field use ■ Safe for cleaning in ESD-protected areas ■ Lead-free and compliant with RoHS *For more details, please refer to the related link page or feel free to contact us.

• Other motors

The "19790" is an investigation set used for measuring, verifying, and managing products in the ESD protection area. The set includes items such as the "electrode handle," which complies with TR53 resistance measurement requirements and ANSI/ESD STM97.1, as well as the "ESD training board," which is used to demonstrate and verify the generation and polarity of static electricity and the functions of ESD countermeasure products. Please contact us if you would like to place an order. 【Set Contents】 ■ Digital Surface Resistance Set "19290" ■ Electrode Handle "19295" ■ Ground Hub Monitor "19219" ■ Low Resistance Tester "19249" ■ Electric Field Potential Measurement Set (Ionizer Test Kit) "19493" ■ ESD Training Board "06850" *For more details, please refer to the related link page or feel free to contact us.

• Other measurement, recording and measuring instruments
• Tool Sets

The "19325" is a single-station continuous monitor designed to check the operator, work surface, and the grounding status of the operator. Using waveform distortion detection technology, it continuously monitors in real-time whether there is a grounding path for the operator and a resistance of 1MΩ. It constantly monitors the integrity of the electrical grounding of one operator, the ESD workstation, and the monitor, eliminating the need for regular testing and record-keeping. 【Features】 ■ Dual function with LED lamps and alarm sounds to monitor the operator and workstation ■ If the operator, work surface, and electrical grounding are functioning normally, the LED lights up (green) ■ If there is a malfunction, the alarm lamp flashes ■ Notifies users and supervisors of issues, allowing for prompt corrective action ■ By connecting to an external relay, control of other devices and accessories is possible *For more details, please refer to the related link page or feel free to contact us.

• Other electronic measuring instruments
• Other electric meters
• Other measurement, recording and measuring instruments

The "19249" is a low-resistance tester that measures the grounding resistance between banana jacks and other devices. With easy-to-understand displays and alarms for simple operation, you can check whether the grounded conductor is within the test range by simply pressing one button. It has a long-lasting battery that allows for over ten thousand tests (2 seconds each). Its lightweight and compact design makes it portable enough to fit in a chest pocket. 【Features】 ■ Measures grounding resistance between banana jacks and other devices ■ Easy operation with clear displays and alarms ■ High testing accuracy at very low resistances compared to standard multimeters ■ Lightweight and compact design ■ Capable of over ten thousand tests (2 seconds each) *For more details, please refer to the related link page or feel free to contact us.

• Other electric meters
• Other measurement, recording and measuring instruments
• Other electronic measuring instruments

The "19239" is a constant monitor for one workbench. An alarm will sound when the worker's wrist strap cord or the banana plug inserted into the monitor's jack is unexpectedly disconnected. With Desco waveform distortion technology, it continuously monitors the grounding path of the wrist strap and the resistance in the low range of 1MΩ more stably. In addition, we offer the "19651" and "19652," which are designed for connection to private electrical work. 【Features】 ■ Single wire impedance structure ■ Complies with ANSI/ESD S20.20 according to ESD TR1.0-01-0 ■ Test voltage is 1.2V ■ Reduces the risk of electrical overstress (EOS) in the operation of electrostatic-sensitive devices ■ Alarm response time is less than 50 milliseconds *For more details, please refer to the related link page or feel free to contact us.

• AC adapter
• Other Connectors
• others

The "60509" is a motion sensor switch for ionizers made in the USA. It uses a unique filter that prevents interference from infrared and other light sources. Sensitivity levels can be adjusted to low, medium, or high. Additionally, it activates the ionizer when an operator is present in the workspace and stops it when they leave, which saves energy and reduces maintenance frequency. 【Features】 ■ Infrared sensor with a bandpass filter ■ Uses a unique filter to prevent interference from infrared and other light sources ■ Adjustable sensitivity levels (low, medium, high) ■ Ensures the ionizer activates when a person enters the work area ■ Allows setting a stop time before the ionizer stops *For more details, please refer to the related link page or feel free to contact us.

• Ionizers and static eliminators
• Other anti-static devices
• Safety Sensors

The "60505" is a steady-state DC ionizer for workbenches. Thanks to a specially designed fan, it achieves a more effective airflow range. It features an excellent static elimination time of under one second at 30.5 cm. To maintain optimal performance, it constantly adjusts the output voltage and automatically alerts you with an alarm when maintenance is needed or when the unit is not operating correctly. 【Features】 - Achieves a more effective airflow range (40.7 cm x 91.6 cm) - Operating balance system with alarm that notifies through sound and lights - Input voltage of 120/220V, selectable - Can be used with a power supply of 110V or 220V - Three fan speed settings: low, medium, and high (4.6 m²/m - 9.3 m²/m) *For more details, please refer to the related link page or feel free to contact us.

• Ionizers and static eliminators
• Other anti-static devices
• fan

The "60473: 3 fans / 60640: 2 fans" is a Study State DC Ionizer (2/3 fan type). In accordance with ANSI/ESD STM 3.1, it maintains a constant offset voltage (balance) of ±10V and features excellent discharge time (approximately under 3 seconds). Specially designed fans cover a wide area (approximately 0.6x1.5m). Additionally, the ionization performance is consistent at any airflow, making it suitable for applications that require meticulous attention, such as calibration, testing, and repair processes. 【Features】 ■ Covers a wider area (approximately 0.6x1.5m) ■ Excellent discharge time (approximately under 3 seconds) ■ Automatic feedback system with sound and LED lamp ■ Switchable between 100/220V ■ Calibrated according to NIST *For more details, please refer to the related link page or feel free to contact us.

• Ionizers and static eliminators
• Other anti-static devices
• fan

The "35853" is a replacement filter for static electricity compatible vacuum cleaners. It can also be used with 3M and Atrix vacuum cleaners. It is made in the USA and complies with lead-free RoHS standards. 【Features】 ■ Replacement filter for static electricity compatible vacuum cleaners ■ Can be used with 3M and Atrix vacuum cleaners ■ Lead-free RoHS compliant ■ Made in the USA *For more details, please refer to the related link page or feel free to contact us.

• Other environmental equipment
• Other filters

The "35470" is a portable smoke extractor that can be installed on or beside a workbench. It features a station design for extracting smoke, particles, and vapors. An alarm sound will notify you when it's time to replace the filter. You can easily switch it ON/OFF with a remote switch, and it can connect to 50mm or 63mm hoses or exhaust arms. HEPA filters (35472) and gas filters (35473) are also available. 【Features】 ■ Main filter efficiency of 95% at 0.3μ ■ Portable and can be installed on or beside a workbench ■ Alarm sound notifies when filter replacement is needed ■ Easy ON/OFF switching with a remote switch ■ Can connect to 50mm or 63mm hoses or exhaust arms *For more details, please refer to the related link page or feel free to contact us.

• Other environmental equipment
• Other filters

The "19668" is a constant monitor for 2 operators and 2 workstations. It continuously monitors the grounding path of the wrist strap and a safe resistance of 1MΩ without interruption or disconnection. You can set limits according to the restrictions of ESD-sensitive devices and other requirements, reducing the risk of fingertip voltage and overvoltage when handling ESD-sensitive equipment. 【Features】 ■ Operator test voltage: ±5V or ±8V ■ Adjustable upper/lower test limits for operators (10 or 35MΩ) ■ Comes with installation fixtures for easy replacement if the jack wears out ■ Complies with ESD TR1.0-01-0 and ANSI/ESD S20.20 ■ Includes NIST calibration certificate *For more details, please refer to the related link page or feel free to contact us.

• Other anti-static devices
• Other electric meters
• EMC/Static electricity measuring equipment

The "19665" is a dual-station continuous monitor for two operators and two workstations. It continuously monitors the integrity of the grounding paths for both the operators and the ESD workstations, eliminating the need for regular testing and record-keeping. It is suitable for workplaces that require independent remote grounding points for two operators with wrist straps (with 3m cables) for assembly, testing, packaging, and other applications. 【Features】 - Continuously monitors the integrity of the grounding paths for both the operators and the ESD workstations - Eliminates the need for regular testing and record-keeping - Low voltage continuous DC loop monitoring technology - Individual alarm conditions: LED and alarm sound - Stainless steel frame *For more details, please refer to the related link page or feel free to contact us.

• Other anti-static devices
• Other electric meters
• EMC/Static electricity measuring equipment

The "19590" is a point-of-use compressed air ionizer. By removing charged dust and debris, it neutralizes static electricity, eliminating issues related to attraction, visual defects, and contamination. It is capable of high-speed discharge of less than one second with a ±30 volt offset voltage balance, tested according to ANSI/ESD STM 3.1. 【Features】 ■ Uses filtered air or nitrogen (no adjustment needed) ■ Quick switching between air supplies ■ Quick filter replacement feature ■ Minimizes downtime ■ NIST calibrated *For more details, please refer to the related links page or feel free to contact us.

• Ionizers and static eliminators
• Other anti-static devices
• Static electricity eliminator

The "19500" is a bench-top blower-type ionizer that employs the Faraday balance system. In addition to releasing ions into a controlled laminar flow, it does not cause discomfort to the user due to its built-in heater. Moreover, it has a long service life and can be used for extended periods. It can be installed in various ways to suit the customer's needs. 【Features】 ■ Employs the Faraday balance system ■ Offset voltage ±5V ■ Releases ions into a controlled laminar flow ■ AC corona discharge type ■ Gold-plated electrodes for long lifespan *For more details, please refer to the related link page or feel free to contact us.

• Ionizers and static eliminators
• Other anti-static devices
• Static electricity eliminator

The product "19350" is capable of testing all circuits, including wrist straps, cords, and contact with the skin. It connects to the grounding point of the equipment while the plug is inserted. It can be installed quickly and easily, grounding both the wrist strap and the workbench mat. Additionally, workers can perform tests without leaving the work area, ensuring productivity is not compromised. Please consider it as a convenient means for maintaining performance and reducing calibration costs. 【Features】 ■ Quick and easy installation ■ Can be used as a common grounding point on the workbench surface ■ No need for additional ground cords ■ Testing can be performed during normal work operations ■ Calibrated according to NIST-approved standards and procedures *For more details, please refer to the related link page or feel free to contact us.

• Other electric meters
• EMC/Static electricity measuring equipment
• Testing Equipment and Devices

The "19246" is a dual station constant monitor for 2 operators and 2 workstations. It is suitable for use in work areas adjacent to assembly parts, testing, packaging, and other tasks. By continuously monitoring the status of the operators and ESD workstations, it eliminates the hassle of regular testing and record-keeping. Additionally, the newly improved banana jack allows for continuous connection, helping to prevent the operator's wrist strap from accidentally disconnecting. 【Features】 - For 2 operators and 2 workstations - Continuously monitors the status of operators and ESD workstations - Eliminates the hassle of regular testing and record-keeping - Prevents accidental disconnection of the operator's wrist strap - For AC 100-120V *For more details, please refer to the related link page or feel free to contact us.

• Other anti-static devices
• Other electric meters
• EMC/Static electricity measuring equipment

We handle the equipment grounding verification monitor hub '19219'. It features a visible display that continuously monitors the integrity of the grounding path of the outlet to comply with the requirements for verifying wiring direction according to ANSI/ESD S6.1. With six banana jacks for 8-ring terminals and six screws, it provides numerous grounding points for wrist straps, mats, carts, devices, and other items. It can also connect to other grounding hubs. 【Features】 - Monitors the wiring and path of AC outlets to the earth ground - Continuous visible display - LED indicates whether the outlet is properly wired - Alarm with lamp and sound - For 100-120V *For more details, please refer to the related link page or feel free to contact us.

• Display
• Routers, Switches, and Hubs
• Wiring materials

We handle the calibration unit '07010' for wristbands and footwear. No power supply is required. It monitors and manages the equipment within RoHS compliance. The test range for wrist straps and foot grounders is 750KΩ-100MΩ. Calibration is performed in accordance with NIST standards and procedures to observe the state during the use of the tester's calibration unit. 【Features】 ■ Resistor ■ No power supply required ■ Calibrated according to NIST ■ Made in the USA ■ Monitors and manages equipment within RoHS compliance *For more details, please refer to the related link page or feel free to contact us.

• Resistors
• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

We handle the ESD training board '06850'. We have prepared a set of ESD training boards that allow for demonstrations and verification of the generation and polarity of static electricity, as well as the functions of ESD control products. The surface is made of aluminum and acrylic measuring 7.6cm x 10.2cm, and when rubbed together and then separated, it generates a static electric field of several kilovolts. 【Features】 - Demonstrates and verifies the generation and polarity of static electricity and the functions of ESD control products - Surface made of aluminum and acrylic measuring 7.6cm x 10.2cm - Generates a static electric field of several kilovolts when rubbed together and separated - Made in the USA *For more details, please refer to the related link page or feel free to contact us.

• EMC/Static electricity measuring equipment
• Other anti-static devices

We would like to introduce our cleanroom-compatible wrist strap '09234'. It is cleaned and packaged in a Class 1000 environment. The polyethylene knit band is infused with silver, ensuring better connectivity even in dry skin or dry environments. Additionally, the patented banana plug features a structure that prevents it from accidentally disconnecting from the banana jack, eliminating the electrical disconnections that can occur with coiled cords and extending the lifespan of the wrist strap. 【Features】 ■ Prevents contamination of contents before being brought into the cleanroom ■ Snap studs made of hard stainless steel ■ Silver-infused polyethylene knit band ■ Does not slip off or peel away from the replaceable lightweight fabric band *For more details, please refer to the related link page or feel free to contact us.

• Anti-static products
• Other anti-static devices

The "09231" is a wrist strap designed to prevent contamination of contents before being transported to a clean room. It uses medical-grade stainless steel for the back plate and joints, ensuring a more reliable grounding path for the operator. The design has a patented size adjustment feature. Additionally, the snap stud made of hard stainless steel is designed to release at a weight of 0.45 to 2.25 kg to prevent the wristband and cord from accidentally coming apart. 【Features】 ■ Cleaned and packaged in a Class 1000 environment ■ Complies with ANSI/ESD S20.20 requirements ■ Adjustable to fit the operator's wrist size ■ Patented design for size adjustment *For more details, please refer to the related link page or feel free to contact us.

• Anti-static products
• Other anti-static devices

The "09206" is a JEWEL coil cord designed to prevent wear on the springs of banana plugs. The strain relief test exceeds 1 million cycles (minimum requirement of 62 cycles according to ESD S1.1). It does not exhibit intermittent issues commonly found in less durable cords, thus prolonging the lifespan of the wrist strap. Additionally, it reduces the load on the strain relief section of the banana plug, minimizing accidents where workers, chairs, or carts collide and damage the banana plug, thereby extending the lifespan of the coil cord. 【Features】 ■ L-shaped terminal design ■ Low-profile snap ■ Date imprint ■ UL approved ■ Made in the USA *For more details, please refer to the related link page or feel free to contact us.

• Anti-static products
• Other anti-static devices

The "09186" comes with a dedicated metal cap with a diameter of 4mm and is a wristband that can use the monitor's wrist strap holder (PARK). By using a dedicated MagSnap coil cord, it provides a more reliable ground path with a premium metal retractable wrist strap. Additionally, we also offer the wrist strap "09187" with a 1MΩ resistor in the coil cord lineup. 【Features】 ■ Connection using a patented revolutionary magnet ■ More reliable design ■ Comes with a dedicated metal cap with a diameter of 4mm ■ Compatible with the monitor's wrist strap holder ■ Uses a dedicated MagSnap coil cord *For more details, please refer to the related link page or feel free to contact us.

• Anti-static products
• Other anti-static devices

The "09180/09181/09182" is a coil cord that provides a more comfortable fit without affecting the user's movements. It combines the coil cord and wristband using magnetic force and meets the ESD S1.1 standard, including a disengagement force of 5-25N. The socket, which can sometimes wear out and fall off due to a small spring, has been removed. Additionally, we offer models such as "09190" and "09191" that can use the monitor's wrist strap holder. 【Features】 ■ Connection using a patented revolutionary magnet (U.S. Patent 5,004,425) ■ Combines the coil cord and wristband using magnetic force ■ Meets the ESD S1.1 standard, including a disengagement force of 5-25N ■ More reliable design *For more details, please refer to the related link page or feel free to contact us.

• Anti-static products
• Other anti-static devices

The "09150" is a coiled cord designed to suppress stress concentration that is strong against bending. It fits all standard banana plugs and has excellent retention, ensuring that the cord does not disconnect and expose components to danger. Additionally, it eliminates issues caused by intermittent use with less durable single and dual wire cords. 【Features】 ■ Easy management of attachment status ■ High-tension polyurethane coiled cord ■ Proven performance exceeding the minimum standard of 3,200 cycles for ESD S1.1 ■ Banana plug terminals are shaped in an L-shape ■ Patented molded spring banana plug *For more details, please refer to the related link page or feel free to contact us.

• Anti-static products
• Other anti-static devices

The "09120" is a coil cord that always maintains electrical contact. The design of the fastener has been improved. Its low profile makes it difficult for the cord to disconnect. Additionally, due to its bright color, supervisors can easily manage the status of the wrist strap, and the patented molded spring-loaded banana plug provides a reliable ground path. 【Features】 ■ High-tension polyurethane coil cord ■ Proven performance exceeding ESD S1.1 requirements ■ Manufactured in Chino, California, USA, with date stamping ■ Improved design of the fastener *For more details, please refer to the related link page or feel free to contact us.

• Anti-static products
• Other anti-static devices

The "09100" is a wrist strap with an adjustable stretch length feature. It has a high-precision processing and a strong stainless steel connection part for the wristband. Due to its bright color, supervisors can easily manage the wearing status of the wrist strap. Additionally, we offer options such as the "09105" which is just the band, and the replacement band "09140". 【Features】 ■ Durable and lightweight fabric ■ Locking function ■ Reduces skin allergic reactions ■ Band material that maintains performance ■ Safe for ultra-small electronic devices *For more details, please refer to the related link page or feel free to contact us.

• Anti-static products
• Other anti-static devices

The "09085" is a wrist strap with an adjustable feature designed for a comfortable fit that does not pinch the skin or body hair. It is long-lasting and easy to clean. It has excellent contact with the wrist and effectively removes static electricity. Additionally, we also offer the L-shaped banana jack cord type "91070" and the wristband only "09041." 【Features】 ■ Designed to avoid pinching the skin or body hair ■ Durable metal wristband ■ Long-lasting and easy to clean ■ Quick and easy length adjustment ■ One size fits everyone *For more details, please refer to the related link page or feel free to contact us.

• Anti-static products
• Other anti-static devices

We offer the wrist strap kit with crocodile clip, '09039'. It is adjustable in length and made of non-slip material. It fits almost everyone and features a rubber band for a comfortable fit. We also have the wristband only model '09035' in our lineup. 【Features】 ■ Adjustable length, non-slip material ■ Fits almost everyone ■ Rubber band ■ Comfortable fit ■ Made in the USA *For more details, please check the related link page or feel free to contact us.

• Anti-static products
• Other anti-static devices

The "CTE701" is a calibrator that can be used for regular calibration tests of products such as the WS Aware monitors "CTC061" and "CTC062," and the ground monitor "CTC065." It allows for verification in the workplace whether the SCS continuous monitor is functioning normally within tolerance limits, thus eliminating downtime. It reads the resistance, impedance, and voltage signals on the SCS continuous monitor. 【Features】 ■ Can be used for regular calibration tests of "CTC061," "CTC062," "CTC065," etc. ■ Capable of eliminating downtime ■ Reads resistance, impedance, and voltage signals on the SCS continuous monitor ■ Manufactured in the USA using raw materials from around the world *For more details, please refer to the related link page or feel free to contact us.

• Other measurement, recording and measuring instruments
• others

The "CTC337-WW" is a wrist strap and grounding monitor that continuously monitors the integrity of the grounding paths for two operators and two metal devices. An alarm will sound if there is contact with or generation of voltages that could pose a risk to ESD-sensitive products. To prepare for handling sensitive components, only a low test voltage (0.10V) is applied to the operators, and the operator's jack can be easily replaced without soldering using the CTA252 replacement jack PCB. 【Features】 ■ Comes with AC adapter ■ Continuously monitors grounding for operators and equipment ■ Compact size (Height 2.2cm × Width 6.1cm × Depth 6.6cm) ■ Used with dual wire wrist straps ■ 100-240VAC power adapter (with interchangeable power plug) *For more details, please refer to the related link page or feel free to contact us.

• Static electricity eliminator
• Anti-static products
• Other anti-static devices

We would like to introduce our grounding monitor, the 'CTC065-5-WW'. The ground monitor monitors the grounding impedance of metal grounding connections in process tools in the workplace. However, it cannot manage environments related to semiconductors, disk drives, flat panels, and electronic equipment manufacturing. 【Features】 ■ MODBUS power type ■ Comes with AC adapter ■ Monitors the grounding impedance of metal grounding connections in process tools in the workplace *For more details, please refer to the related link page or feel free to contact us.

• Static electricity eliminator
• Anti-static products
• Other anti-static devices

The "CTC061-5-243-WW" is a workstation monitor with MODBUS output and an AC adapter. It continuously monitors the grounding paths of two operators, two conductive/static dissipative workbenches, and two metal tools. The monitor can be installed in a visible location, and the remote terminal can be placed in a convenient spot within 3 meters. Additionally, it allows for testing operators at an ultra-low voltage (0.05V) to handle electrostatic-sensitive components. 【Features】 ■ Complies with ANSI/ESD S20.20 according to ESD TR1.0-01-01 ■ Capable of testing operators at ultra-low voltage (0.05V) ■ Replaceable dual-wire operator jack ■ Performance and compliance testing can be conducted in-house using a calibrator *For more details, please refer to the related link page or feel free to contact us.

• Static electricity eliminator
• Anti-static products
• Other anti-static devices

The "CTC034-030-3-WW" is an electrostatic discharge (ESD) monitor that detects most ESD events and their scale in real-time, counting the occurrences. It outputs 4.20mA for use with data collection software, identifies areas where problems are occurring, and applies equipment for handling ESD-sensitive devices. Additionally, by using the "CTC118-6FT," it is possible to detect ESD events even within surface mount ovens. 【Features】 ■ Identifies areas where problems are occurring and applies equipment for handling ESD-sensitive devices ■ Outputs 4.20mA for use with data collection software ■ High-temperature antennas can also be used ■ AC adapter with conversion plug (100-240VAC) *For more details, please refer to the related link page or feel free to contact us.

• Static electricity eliminator
• Anti-static products
• Other anti-static devices

The "770076" is a calibrator for the workstation monitor "770075." It is possible to calibrate the SCS 770075 WSMONITOR2 Plus while it is installed on-site. It has been calibrated according to procedures and standards approved by NIST. For more details regarding the calibration of SCS products, please contact us. 【Features】 ■ For workstation monitor "770075" ■ Calibration can be performed on-site with the SCS 770075 WSMONITOR2 Plus installed ■ Comes with a calibration certificate compliant with NIST ■ Made in the USA *For more information, please refer to the related links page or feel free to contact us.

• Other measurement, recording and measuring instruments
• others

Our company handles the calibrator '770065' for the workstations '724' and '725'. It is possible to verify the test limits of the workstation monitor '724' and the portable wrist strap monitor '725' in the workplace. The grounding circuit of '725' is checked using a grounding clip connection and a knob switch. Additionally, calibration is performed in accordance with the procedures and standards set by the International Standard Technology Institute. 【Features】 ■ Ability to verify the test limits of '724' and '725' in the workplace ■ Check the grounding circuit of '725' ■ Calibration performed according to the procedures and standards established by the International Standard Technology Institute *For more details, please refer to the related link page or feel free to contact us.

• Other measurement, recording and measuring instruments
• others

The "770061/770062" is a grounding monitor used in conjunction with the Static Control Program (SMP) for network communication. Data is collected through the SMP, which incorporates operator resistance, operator voltage, mat resistance, metal tool impedance, and metal tool EMI voltage. It continuously monitors the grounding paths of two operators, two conductive/static dissipative workbenches, and two metal tools, allowing for testing of operators at ultra-low voltage (0.05V) to handle ESD-sensitive components. 【Features】 ■ Complies with ANSI/ESD S20.20 according to ESD TR1.0-01-01 ■ Allows testing of operators at ultra-low voltage (0.05V) for handling ESD-sensitive components ■ Includes a monitor and two remote terminals ■ Can be used with dual-wire wrist straps *For more details, please refer to the related link page or feel free to contact us.

• Static electricity eliminator
• Anti-static products
• Other anti-static devices

The "770060" is a ground monitor with Ethernet output. By using it in conjunction with the Static Control Program (SMP), network communication is possible. It collects data through the SMP, which incorporates metal grounding impedance and EMI voltage. Additionally, to enhance visual recognition, it comes with a light and a buzzer, and it is compatible with standard electrical systems in North America, the UK, Japan, Asia, and Europe. 【Features】 ■ Ethernet output ■ Continuous monitoring of the grounding path impedance of eight metal manufacturing facilities ■ Complies with ANSI/ESD S20.20 ■ Monitors EMI on metal grounding *For more details, please refer to the related link page or feel free to contact us.

• Static electricity eliminator
• Anti-static products
• Other anti-static devices

The "973-RW0-010" is an ionized air blower that ionizes charges on insulating materials and isolated conductive objects within a specified area. To ensure optimal ionizer performance, it maintains sharp needles that resist oxidation, melting, and factors affecting the tips of the electrode needles. Additionally, when used in clean rooms or sensitive areas, it minimizes foreign object debris, corrosion, and other contaminants. It is suitable for use in restricted spaces such as environmental protection rooms, automation device surroundings, and standard ESD workspaces. 【Features】 ■ Fastest discharge time (less than 2.5 seconds at a distance of 30 cm) ■ Built-in automatic electrode needle cleaner ■ Removes particle accumulation to maintain optimal ionization efficiency ■ Variable rotational speed (1.5 to 4.0 m/s) ■ Compact ionizer suitable for both stand-alone and installation use (24VDC input) *For more details, please refer to the related link page or feel free to contact us.

• Static electricity eliminator
• Anti-static products
• Other anti-static devices