日本ハイドロパック List of Products and Services

The "High Pressure Series (30/60/40VM Series)" is a high-pressure valve made from cold-worked 316SS steel, finished through machining from bar stock. The stem does not rotate but moves up and down, preventing seizing of the valve seat. Additionally, the fully closed state achieves metal-to-metal contact with leak-free bubble-tight shutoff performance. It has excellent corrosion resistance, and the smoothly operating stem maintains consistent performance even after long-term repeated use. 【Features】 ■ No seizing of the valve seat ■ Maintains consistent performance even after long-term repeated use ■ Cone & thread piping connections are highly reliable under maximum pressure ■ Non-leak, bubble-tight performance ■ Maintains initial performance even after repeated installation and removal *For more details, please download the PDF or feel free to contact us.

• valve
• Other machine elements

The "High Pressure Series (30SC Series)" is a high-pressure valve with a large diameter of 1 inch, made using cold-worked 316 stainless steel for the body material. It features bubble-tight shut-off performance, a smoothly operating stem, and a handle that rotates with low torque. Additionally, the cone and thread type piping connection allows for repeated installation. 【Features】 ■ High-pressure valve ■ Body material made of cold-worked 316 stainless steel ■ Non-rotating rising and lowering stem prevents seizing ■ Bubble-tight shut-off performance ■ Cone and thread type piping connection *For more details, please download the PDF or feel free to contact us.

• valve
• Other machine elements

The "Medium Pressure Series (20SM/10SM Series)" is a needle valve made from cold-worked 316 SS steel, finished through machining from bar stock. The stem does not rotate but moves up and down, preventing the valve seat from seizing. Additionally, the fully closed state achieves metal-to-metal contact with leak-free bubble-tight shutoff performance. It has excellent corrosion resistance, and the smoothly operating stem maintains consistent performance even after long-term repeated use. 【Features】 ■ No seizing of the valve seat ■ Maintains consistent performance even after long-term repeated use ■ Cone & thread piping connections are highly reliable under maximum pressure ■ Non-leak, bubble-tight performance ■ Maintains initial performance even after repeated installation and removal *For more details, please download the PDF or feel free to contact us.

• valve
• Other machine elements

The "Low Pressure Series (10V/SW Series)" is a needle valve made from cold-worked 316SS steel, finished by machining from solid bar stock. The stem moves up and down without rotation, preventing seizing of the valve seat. Additionally, the fully closed state achieves metal-to-metal contact with bubble-tight shutoff performance, ensuring no leakage. With excellent corrosion resistance, the smoothly operating stem maintains consistent performance even after long-term repeated use. 【Features】 ■ No seizing of the valve seat ■ Maintains consistent performance even after long-term repeated use ■ Achieves highly reliable connections ■ Offers gas and valve-tight sealing performance up to 103 MPa ■ The SW series is ideal for high flow applications *For more details, please download the PDF or feel free to contact us.

• valve
• Other machine elements

The "High Pressure Liquid Pump FC Series" is designed to handle high pressure and large flow rates. It offers reliability and low total cost to all users. Hydropack provides a wide variety of high-pressure dedicated pumps tailored to user specifications. ■ Stainless steel and special alloy intensifiers ■ Slurry dedicated intensifiers ■ Internal pressure pulse generating intensifiers 【Features】 ■ Discharge pressure: up to 70/105/140/210/275/415/690/1030/1380 (MPa) ■ Motor: 10/20/40/60/75/100/150/200 (Hp) *For more details, please download the fax sheet, fill in the required information, and return it.

• Concentration Equipment
• Other pumps

The "High Pressure Liquid Pump CX Series" is a compact yet tough critter pump. It is used in many industrial applications that require high pressure. 【Features】 ■ Discharge Pressure: up to 105/210/415/690/1030/1380 (MPa) ■ Motor: 3/5/15/20/40 (Hp) *If you would like more details, please download the fax sheet, fill in the necessary information, and return it.

• Concentration Equipment
• Other pumps

The "High-Pressure Oil-Free Gas Compressor LX Series" is a compressor for low to medium pressure that inherits the high reliability proven by Hydro Pack's high-pressure compressors. It features an oil-free, non-lubricated gas piston, and is designed to completely isolate the drive side from the gas compression side, preventing contamination of process gases. It is ideal for commercial gas recovery and filling, gas injection molding and foaming, leak testing, supercritical extraction and cleaning, CNC filling and pressurization, hydrogen addition processes, and incinerator gas filling. 【Features】 ■ Inlet pressure: 0.48 (MPa) and above ■ Discharge pressure: 10/21/42 (MPa) ■ Motor: 3/5/10/15/20/40 (Hp) *For more details, please download the fax sheet, fill in the required information, and return it.

• Other pumps
• Concentration Equipment

The "High-Pressure Non-Lubricated Gas Compressor FX Series" is suitable for medium to high-pressure applications. It is a representative model of Hydro Pack used in various high-pressure gas testing facilities and HIP equipment around the world. 【Features】 ■ Discharge Pressure: 70/105/140/210/310 (MPa) ■ Motor: 10/20/40/60/75/100 (Hp) *If you would like more details, please download the fax sheet, fill in the necessary information, and return it.

• Concentration Equipment
• Other pumps

The "High Pressure Non-Lubricated Gas Compressor CX 'Chibi' Critter" is equipped with a single-phase 110VAC motor! Its air-cooled design allows it to perform effectively in laboratories and on-site locations where portability is required. 【Features】 ■ Discharge Pressure: 80/210 (MPa) ■ Size: 470L × 360W × 430H (mm), Weight: approximately 40 (kg) *If you would like more details, please download the fax sheet, fill in the necessary information, and return it.

• Concentration Equipment
• Other pumps

The "High-Pressure Non-Lubricated Gas Compressor CX Series" features a simple gas compression section and a compact electric hydraulic drive unit. It is used in gas boosting systems. 【Features】 ■ Discharge Pressure: up to 70/80/105/210/310 (MPa) ■ Motor: 3/5/7.5 *For more details, please download the FAX sheet, fill in the required information, and return it.

• Concentration Equipment
• Other pumps

Japan Hydro Pack Co., Ltd. began importing and selling products as the general agent for Autoclave Engineers (AE) in Japan since 1990. We have established a stock system for our main products and provide support for product selection based on applications, technical considerations, and after-sales maintenance services. 【Products Handled (Partial List)】 Hand valves, high-temperature/cryogenic valves, air-operated valves, metering valves, check valves, excess flow valves, line filters, relief valves, thermocouples, safety heads, pressure gauges, tube benders, tube processing tools, etc. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 　　　　　　　★ Free comprehensive catalog available now! ★ 　 　　If you are interested, please request it via the "Contact Form." ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ *If you would like a booklet, please contact us via the "Contact Form." *For more details, please download the FAX sheet, fill in the required information, and return it to us.

• valve
• Pipe Fittings

The air-driven high-pressure liquid pump is a product of Autoclave Engineers, a company with over 80 years of experience specializing in high pressure and a proven track record in high-pressure equipment worldwide. They provide compact and highly reliable liquid pumps that operate on low-pressure air. A wide range of models is available, from low flow to high flow types, with pressures up to 400 MPa, suitable for various applications. *If you would like more details, please download the fax sheet, fill in the required information, and return it.*

• Other pumps
• Pneumatic Equipment

The Hydro Pack Company's high-pressure gas compressor features a simple structure, long stroke, low-speed rotation, smooth operation with no vibrations, and boasts excellent durability. *If you would like more details, please download the fax sheet, fill in the necessary information, and return it.*

• Other physicochemical equipment
• Other pumps

Autoclave Engineers in the United States has been developing and manufacturing high-temperature and high-pressure valve piping products for over 80 years, with a proven track record in high-pressure processes worldwide. Their "Cone & Thread" connection has been demonstrated to be the most reliable connection method under high pressure. Japan Hydropack Co., Ltd. has been the exclusive distributor for the company in Japan since 1995, providing users with valve selection support, repair and adjustment services, as well as services to comply with the High-Pressure Gas Safety Act. For more details, please contact us or refer to the catalog.

• valve
• Pipe Fittings
• Water Hydraulic Equipment

■Hydro Pack (USA) Non-lubricated Gas Compressor Gas compressors are used in numerous high-pressure gas plants, including fuel cell hydrogen stations. Pressure: Low pressure series up to 40MPa, medium pressure series up to 90MPa, ultra-high pressure series up to 300MPa. Available in various types, from experimental heavy-duty 100V motors to several hundred cubic meters and 75KW types. Gases include hydrogen, helium, methane, nitrogen, argon, etc. ■Hydro Pack (USA) High-Pressure Pump Electric hydraulic intensifier type, 100MPa to 1400MPa (14000 psi). Available in various types, from small laboratory units to large units up to 150KW. Applications include powder molding CIP, hydraulic molding, pressure testing, destruction testing, internal pressure pulse fatigue testing, and others. *For more details, please download the fax sheet, fill in the required information, and return it.*

• Other pumps
• Concentration Equipment

The Hydro Pack Burst Test System is a device that can test the pressure resistance and burst pressure of containers and valves under high pressure. The pressure generation system packages a high-pressure pump and pressure measurement devices necessary for testing into a compact cabinet. Additionally, we design and manufacture internal pressure/fatigue cycle tests (examples: 200MPa, 700MPa) based on customer specifications. For more details, please contact us or refer to the catalog.

• Testing Equipment and Devices

Autoclave Engineers, a company with over 80 years of experience in high-pressure applications and a proven track record worldwide, manufactures high-pressure cells and small reactor systems ranging from 10 ml to 2000 ml for laboratory use. The pressure range they produce goes up to 400 MPa, with temperatures up to 450°C, and they offer pressure vessels with ASME U stamps. In addition, they have a wide range of equipment including magnetic drive stirrers, reactors with catalyst baskets, and benchtop reaction systems. For more details, please contact us or refer to the catalog. *Please note that this catalog is in English.

• Testing Equipment and Devices
• Mixer/agitator
• Autoclave