三協インタナショナル Product Lineup

Selectable according to application: slip ring type, reaction type, non-contact type, etc. High sensitivity: Range ±0.05 Nm / ±10 VDC output. From static measurement to dynamic measurement (max 37000 rpm).

• Testing Equipment and Devices

The ET series has 38 standard products and can measure a maximum rotational speed of 130,000 rpm and a maximum torque of 77,000 Nm.

• Testing Equipment and Devices

4-20 mA current loop output (acceleration range selectable: 1, 2, 5, 10, 20 G) Protection rating IP67

• Vibration Testing

Built-in amplifier type (IEPE type) Voltage output (100 mV/G or 500 mV/G) Protection rating IP67

• Vibration Testing

Response frequency (0.2 to 350 Hz) Current output (2 mA/G) Long-distance transmission possible (up to 1000 m)

• Vibration Testing

Response frequency (0.2 to 350 Hz) Current output (2 mA/G) Long-distance transmission possible (up to 1000 m)

• Vibration Testing

High response frequency (up to 8,000 Hz) High sensitivity (50μA/G) Current output (50μA/G), capable of long-distance transmission (up to 1000 m) Explosion-proof certification

• Vibration Testing

Wide operating temperature range (-55 to 260℃) High response frequency (up to 7,000 Hz) Current output (10μA/G), capable of long-distance transmission (up to 1000 m) Explosion-proof certification

• Vibration Testing

High temperature resistance (-54 to 650 ℃) Radiation resistance: Gamma rays (10^11 erg/g), Neutrons (10^18 n/cm²) Explosion-proof certification

• Vibration Testing

Supports extreme low temperatures to high temperatures (-253 to 500 ℃) Explosion-proof certification

• Vibration Testing

High sensitivity (50 pC/G) High temperature resistance (-55 to 500℃) Explosion-proof certification

• Vibration Testing

High sensitivity (100 pC/G) Wide response frequency (0.5 to 10,000 Hz) Explosion-proof certification

• Vibration Testing

High sensitivity (100 pC/G) Wide response frequency (0.5 to 5,000 Hz) Explosion-proof certification

• Vibration Testing

Three acceleration pickups are mounted in three axial directions on an aluminum block. The aluminum block has two titanium pipes for water cooling, to which tubes are attached to circulate the cooling water. The size is 28.0 x 28.0 x 22.4 mm (excluding the water cooling ports) and the weight is 3 g.

• Vibration Testing

It has a size of 7 x 7 x 5.66 mm and a lightweight of 1.2 g, allowing for dynamic measurements without affecting the measurement target, with a maximum of 49,033 m/s² and a frequency range of 1 to 9,000 Hz (±5%). It can also be used in environments with temperatures up to 200 °C.

• Vibration Testing

Overrange: Maximum 10,000 G applied voltage 2-10 VDC, linearity 1% FS IP65, low-noise cable

• Vibration Testing

Range: ±2 to ±100 G Response frequency: up to 1000 Hz Shock resistance: up to 5000 G Environmental resistance: IP65 Temperature compensation range: -40 to 100℃

• Vibration Testing

The system configuration is the same as AMPTS, but the capacity and number of reactors will change. Gas capacity measurement resolution: 9 ml (standard), 2 ml (optional).

• Analytical Equipment and Devices

Shock resistant from three directions, up to 10,000 G Response frequency DC to 3000 Hz, operating temperature range -40 to 120°C Compact and lightweight, under 6 g

• Vibration Testing

Range: ±50 to 5000 G, DC measurement and dynamic measurement A2: ±15 VDC, B2: 24 to 32 VDC power supply selection Temperature compensation range: 20 to 80 ℃, linearity: ±1%

• Vibration Testing

Linearity: ±0.1%, Horizontal axis sensitivity error: 3% or less Applied voltage: 4-30 VDC, Shock resistance: 6000 G Operating temperature compensation range: -55 to 125 ℃

• Vibration Testing

Linearity: ±0.1%, horizontal axis sensitivity error: 2% or less Applied voltage: 4-30 VDC, shock resistance: 6000 G Operating temperature compensation range: -55℃ to 125℃

• Vibration Testing

Range: ±5 to ±2500 G (Half Bridge) Output: mVDC Shock resistance: Up to 10000 G Temperature compensation range: -20 to 80 ℃ Operating temperature range: -40 to 120 ℃

• Vibration Testing

Response frequency DC to 3000 Hz Operating temperature range -40 to 120 ℃ Weight under 1 g, maximum overrange 10000 G

• Vibration Testing

Output: 2.5±2.0 VDC Range: ±2 G・±6 G Overrange: 2000 G Self-test function included, Applied voltage: 5～30 VDC/4 mA

• Vibration Testing

Platinum temperature measurement resistance body with AC resistance bridge High precision: ±1 ppm/±0.25 mK at 0.01 ℃ Resolution: 0.1 ppm/0.001 mΩ/0.01 mK

• Temperature and humidity measuring instruments

The liquid tank uses silicone oil, and the temperature in the bath is maintained uniformly and stably. The test specimen and reference thermometer are installed in the bath to compare and calibrate the temperature.

• Temperature and humidity measuring instruments

This is an inexpensive high-precision (0.03 %Rdg) barometer from Mensor. * Pressure range: 560 to 1170 hPa * Accuracy: 0.03% of Reading * RS-232 or RS-485 communication compatible * Peak measurement function, zero adjustment function

• Pressure

Honeywell's gas sensors have a long track record and support 28 types of gases with over 300 different sensors. They cover 99% of gas sensors.

• Other environmental analysis equipment

Outer diameter: 6mm Length: specified length (minimum 250mm) Operating pressure: maximum 40MPa Pressure medium temperature range: -40 to 70℃ Pipe fittings: 1/4" or 1/8" Inner tube: polyester

• tube

*Maximum operating pressure: 21MPa *Seamless operation in automatic and manual modes

• Testing Equipment and Devices

Pressure range: 0.5 to 70 MPa, 2 to 160 MPa Maximum accuracy: 0.01 %FS Control stability: <0.005 %FS

• Pressure

The COMUS reed relays offer a lineup that is not covered by our TSG reed relays. They use high-reliability, long-life COTO reed switches, and we provide quality assurance through acceptance testing and other measures before delivery.

• relay

The laser distance meters LDM71 / LDM72 can measure up to a maximum of 270 m. With a high response frequency and being among the smallest and lightest in its class, it can be mounted on drones. 【Features】 ◇ Measurement range: Up to 270 m (with reflective sheet) ◇ Measurement accuracy: ±60 mm ◇ Laser class 1 ◇ Response frequency: Up to 40 KHz ◇ Weight: 137 g (60 g available for sale without case cover) *For more details, please download the catalog or feel free to contact us.

• Distance measuring device

It is a handheld multifunction calibrator. It integrates essential functions for on-site calibration/testing, such as pressure, temperature, and electrical (current, voltage, frequency, resistance) in one device.

• Calibration and repair

It is a handheld multifunction calibrator from Beamex. It integrates essential functions for on-site calibration/testing, such as pressure, temperature, and electrical (current, voltage, frequency, resistance) in one device.

• Calibration and repair

Jewell's compass is equipped with a number of sensors that require dynamic conditions. It requires a total of 11-axis output, enabling azimuth, roll, and pitch measurements. The sensors are managed and shipped under a high-performance and rigorous calibration system. Applications include unmanned vehicles, excavation machinery, robot control, and platform stabilization.

• Other measurement, recording and measuring instruments

- Pressure range can be changed for each 1 module (16 channels). - Equipped with purge and auto-zero functions. - Has analog and digital (RS-485 or Ethernet) outputs.

• Pressure

We have variations of withstand voltage from DC 3KV to 30KV. They are used in various insulation testing devices, dielectric strength testing equipment, and cable testing devices. Quick delivery is possible.

• relay

It is possible to analyze the biogas production rate (BPM) at low flow rates for batch tests of all organic materials. The effects of temperature and pressure are corrected, and measurements are calculated at 0°C and 1 atmosphere. Gas volume measurement resolution: 9 ml or 2 ml.

• Other measurement, recording and measuring instruments

This is a pressure sensor for ultra-high pressure from WIKA. It is one of the few products in the world that can measure ultra-high pressure. The maximum range is 1500 MPa.

• Pressure

This is a general industrial pressure sensor from WIKA. We offer a variety of pressure ranges.

• Pressure

This is a general industrial pressure sensor from WIKA. It features a compact design, high quality, and low price. Available for purchase from one unit, and OEM options are also available.

• Pressure

Output via Bluetooth communication Can be used for up to 1 year with a button battery (depending on communication frequency) Can be measured with smartphones and tablets High precision (sensitivity ±0.1%, total error band ±0.75%)

• Pressure

High-precision digital pressure gauge Compatible with low to high pressure, it responds to the customer's desired unit display. It enables use in hazardous environments with explosion-proof areas.

• Pressure