HAWEジャパン List of Products and Services

Our company provides hydraulic equipment for controlling the steering of leisure boats used in marine (on the water), the up and down operation of outboard motors, and the up and down movement of jet skis for buffering control. Applications: 1. Stern drives and inboard engines for leisure boats 2. Outboard motors and steering for leisure boats 3. Jet skis Key Features: 1. Compact and powerful hydraulic system 2. Low noise 3. Multifunctional (trim, tilt, steering) 4. Strong resistance to seawater and other harsh conditions 5. Compact unit integrates brushless motor and sensors 6. High heat dissipation aluminum body 7. Outboard motors and steering systems can be operated independently from the engine's power 8. Certification obtained for new boat standards ISO8846, EN ISO10592, etc. Additionally, customization is available according to customer requirements.

• Hydraulic Equipment
• brake
• Flow Control

- It is ultra-compact, lightweight, and supports ultra-high pressure of 70MPa. - It can be integrated into the P ports of our sheet-type switching valve Type G (RE01, ER11, ER21, ER31) and Type WH1 (EK01). - This valve is ideal for hydraulic circuits with regular switching cycles.

• valve
• Hydraulic Equipment
• Other machine elements

- The ball sheet structure provides excellent sealing function, pressure retention, and position holding capability. - The direct current has a connector with a lamp. - There is no shock or hydrostatic effect during switching, and it operates smoothly.

• valve
• Hydraulic Equipment
• Other machine elements

The valve is equipped with an inductive proximity sensor or position detection switch for position detection, and it is a valve that meets various safety standards.

• Hydraulic Equipment

●This controller can easily control complex mobile or stationary hydraulic systems. ●Advanced functions can be utilized by feeding back and measuring valve outputs. ●With a wealth of settings and programming options, it can be used for a wide range of applications.

• Other electronic parts
• Hydraulic Equipment
• Remote Control

- There are three types of flanges: ISO, DIN, and M2. - ISO and DIN are ideal for mobile and construction machinery applications that require various operational controls. - The M2 flange is suitable for winch, swivel, wheel, and track operations. - The design minimizes the movable area and features a compact hydraulic motor with high starting torque and reliable operation. - The double cone roller bearings provide high load capacity on the shaft and excellent speed control.

• Hydraulic Equipment
• Other motors

- The SLPD DIN consists of 8 types of displacement sizes with 2 ports. - The pump housing can be directly mounted with a power take-off even in tight spaces. - The SLPD 20/20-64/32 DIN can be mounted using a frame bracket via an intermediate shaft. - A specification with a Savtec valve is available for use with hydraulic power during vehicle movement. - Any rotation direction. - A cost-effective solution that allows the installation of two pumps using a splitter gear. - Smooth operation across the entire rotation range. - Long lifespan due to the use of high-quality materials such as bearings and seals. - O-rings on all contact surfaces and double shaft seals.

• Hydraulic Equipment

Sweden SUNFAB Corporation In various hydraulic equipment for vehicles, large-capacity single discharge pumps are used. As a result, there are instances where the speed required is too slow, leading to rapid heat generation. Sunfab's two-stage pumps provide the most optimized solution both technically and economically. Sunfab's two-stage pumps can be used with two ports for equal flow discharge and one port for low flow and one port for high flow. The latter can create three types of flow: low flow, high flow, and a combination of both. When different pressure levels are required, combinations can be made based on flow and pressure to maximize the allowable power take-off capacity.

• Hydraulic Equipment

●Maintaining low noise levels at maximum speed ●Smooth movement in the forward speed range ●Extended lifespan through the selection of high-quality materials such as bearings and seals, etc.

• Hydraulic Equipment
• Positive Displacement Pump

The multi-way proportional control directional spool valve performs flow control with pressure compensation proportional to the spool stroke. Each proportional control directional spool valve operates independently without affecting one another, allowing for independent pressure and flow to be achieved, enabling multiple actuators to operate simultaneously at different loads and speeds. (During simultaneous operation, lighter load cylinders will not move before heavier load ones.) Types PSL and PSV can be connected up to 12 ways (size 5 can connect up to 10 ways). Additionally, a port block can be attached to the outlet ports of each switching spool valve (size 2 is standard), allowing for the addition of functions such as relief valves and pilot check valves.

• Hydraulic Equipment
• valve
• Other machine elements

It is a highly reliable and powerful hydraulic accumulator. It is used in cutting-edge hydraulic systems, regardless of whether they are mobile or stationary. This product is suitable for situations where there is a need to save energy, dampen pulsations, compensate for leaks, or supply a large flow in a short time. There is no product that can provide a faster and easier solution than a piston-type accumulator in such cases. The compressible gas section and the liquid section (e.g., hydraulic oil) are separated by a floating piston. Even under harsh operating conditions, high-quality seals that have undergone testing ensure reliable separation of the gas and liquid sections.

• Sealing
• Other machine elements
• Hydraulic Equipment

There are inline check valves, relief valves, hydraulic pilot-operated directional control valves, etc.

• Hydraulic Equipment
• valve
• Other machine elements

Atos modular (stacked) valves offer a wide variety, making it easy to configure systems according to customer requirements.

• Hydraulic Equipment
• valve
• Other machine elements

The cartridge valve (logic valve) comes with a cover for poppet or spool types. The cover holds the cartridge in place and allows for a better fluid connection.

• Hydraulic Equipment
• valve
• Other machine elements

●Mounting surface: Compliant with ISO 4401-03-02-0-05 or ISO 4401-05-04-0-05 ●The valve block can be configured using the subplate system BA. ●Compliant with CE marking according to EMC directive.

• Hydraulic Equipment
• Flow Control
• Remote Control

- Our multi-flow pump can be combined with a seat-type switching valve to form a synchronization circuit. - It maintains a constant speed for reversing devices, swinging devices, and long crane arms where the load fluctuates positively and negatively.

• Other processing machines
• valve
• Hydraulic Equipment

- This pump achieves long life and provides high reliability through the adoption of high-load capacity bearings, steel piston shoes, a wear guarantee for the shoes, and a shape pressing mechanism. - A wide range of control methods that input hydraulic and electric signals are available. - Pressure control, flow control, output (torque) control, and their combined control are possible. - By installing an optional indicator, the angle condition of the swash plate can be checked from the outside. - The through-shaft type can connect multiple V30D pumps in series or can be equipped with a gear pump as an auxiliary hydraulic source. - It can handle high loads and large capacities. - Tandem-compatible models and various control regulators are available.

• Other pumps
• Hydraulic Equipment
• Power Transmission Equipment

We provide standard hydraulic units that could not handle large flow rates with compact units, etc. Continuous operation (S1) is possible. The pump is located inside the tank. A combination of a single pump or an external gear pump with a radial piston pump is possible.

• Machining Center
• Forging Machine
• Hydraulic Equipment

The compact and highly versatile hydraulic unit type NPC (DC drive) is designed for intermittent operation and supplies hydraulic power to actuators. It is equipped with a flange for valve mounting. It is ideal for applications that require mobility, such as construction sites.

• Hydraulic Equipment
• Positive Displacement Pump

The Programmable Logical Valve Controller Type PLVC is used for controlling complex hydraulic circuits. It can control and record operations that vary in pressure, speed, and acceleration within a pre-set range. It is positioned as a product that allows user programming and incorporates an amplifier for proportional control valves. Analog and digital components connected via CAN-Bus (e.g., pressure sensors, joysticks) are connected either by cable or wirelessly and are used for control and closed-loop tasks.

• Other process controls
• Hydraulic Equipment

Subplate for freely combining directional control valve types as follows: NG 6 standard connection pattern. Type BNG consists of multiple valve sections and is mounted on the subplate. It can be flexibly customized into a compact hydraulic control block according to customer requirements. Additionally, it can be directly flange-connected to the hydraulic unit.

• Hydraulic Equipment

- The electromagnetic solenoid is of the wet type, so it has a protection rating of IP65 and can be used in harsh environments. - It can maintain pressure for long periods. - There is no shock or hydrostatic effect during switching, and it operates smoothly in any situation. - Type NBVP has mounting dimensions that conform to ISO standards, allowing for interchangeability with valves from other manufacturers. - There are various types of switching operations available: electromagnetic solenoid, hydraulic pilot, pneumatic pilot, manual (including with detent), and mechanical operation. - A cost-effective version with a maximum operating pressure of 25MPa is also available.

• valve
• Hydraulic Equipment

The throttle valves Type Q, QR, and QV are valves that control flow. This type comes in five different sizes and is used for flow control in accumulators and control circuits. The throttle type equipped with these types (covering the entire operating range) has higher resistance to degradation of hydraulic oil compared to types with annular gaps (there is no edge filter effect). Type FG allows for fine adjustment and can be used to adjust the switching time of directional control valves, prevent surge pressure, and dampen vibrations, among other applications. The amount of throttle can be adjusted by changing the length of the slot with a screw. These valves are of the "tool-adjustable" type only.

• valve
• Hydraulic Equipment

Our compact unit can be directly installed, adding space-saving and high functionality. In long-duration clamping and unclamping devices, by combining with a non-leak valve, intermittent operation of the compact unit can be achieved, reducing energy consumption.

• Other machine tools
• valve
• Hydraulic Equipment

These valves block the flow path to the actuator downstream when the pressure at port B of the actuator reaches the set pressure. At this time, there is no leakage at all. When the pressure at port A falls below the set value, this valve opens the flow path again. The advantage of the cartridge-type valve CDSV is that it is easy to process the mounting holes (refer to dimensions). This type is used for the protection of pressure gauges.

• valve
• Hydraulic Equipment

A reducing valve has the function of maintaining a constant outlet pressure when the inlet pressure becomes high within a hydraulic circuit. These valves are typically used when it is necessary to supply a low and constant pressure to a secondary circuit from a primary circuit that has high and variable pressure levels. They are designed for flow supply to control circuits with low flow requirements. By design, there is always a leak, which needs to be returned to the tank through the depressurized line. Reverse flow direction is possible up to about 30% of Qmax. A bypass check valve is required for higher pressure reverse flow. These reducing valves are equipped with an override compensation function, which allows them to function like pressure control valves when the pressure on the secondary side exceeds the set pressure due to external forces, etc.

• valve
• Hydraulic Equipment

It is ideal for controlling lifting devices such as aerial work platform lifts and reach-type forklifts. We also offer types compatible with the regenerative circuit of electric forklifts.

• valve
• Hydraulic Equipment
• lift

This composite valve is a hydraulic chuck control valve for lathe machines. It is a valve equipped with functions for controlling the clamping/unclamping operation of the chuck cylinder, speed control, clamping pressure control, and operational pressure monitoring, all of which are essential features required to comply with European safety standards.

• Other machine tools
• valve
• Hydraulic Equipment

Electromagnetic hydraulic pilot type high-pressure large flow directional control valve

• valve
• Hydraulic Equipment
• Other machine elements

- The mounting part has a double structure, making it easy to process the manifold, eliminating the influence of mounting distortion, and preventing damage to the manifold holes even when reassembling. - The dimensions of the mounting part are short, resulting in a smaller manifold, which simplifies hole processing and reduces manufacturing costs. - It is ideal for high pressure of 30 to 50 MPa, compact and lightweight, and suitable for downsizing manifolds and hydraulic units while reducing costs. 【Features】 - Used to control pressure within hydraulic systems. - Available in two types: relief valves and sequence valves.

• valve
• Hydraulic Equipment
• Other machine elements

- This is a clamp cylinder that can be easily installed with just the processing of screw holes. - It enables space-saving design against large thrust. - Despite its small size, it features a spring return mechanism.

• Other machine elements
• cylinder
• Hydraulic Equipment

The throttle valve type CAV can completely block the flow. It comes in various sizes and belongs to the group of flow control valves. These valves reduce the pressure between the inlet and outlet to control the cylinder speed in accumulator circuits or the flow within control circuits, and they also function as a protective feature for pressure gauges.

• valve
• Hydraulic Equipment

- The throttle valves type AVT, AVM, and CAV can completely block the flow. - These valves are used to reduce the pressure between the inlet and outlet to control the cylinder speed in the accumulator circuit and the flow rate in the control circuit, or as a protective function for pressure gauges.

• valve
• Hydraulic Equipment

- This throttle valve can control the flow rate in the control circuit at a maximum operating pressure of 70 MPa. - The structure is of the slit type, and it can be equipped with a check valve that allows for either a simple throttle (without check) or free flow in one direction and controlled flow in the other direction. - The spindle is sealed by two packing seals, preventing external leaks during adjustment.

• valve
• Hydraulic Equipment
• Other machine elements

- It can be easily attached to the threaded parts of connection ports such as manifolds and cylinders. - It is a check valve with excellent sealing properties. - An inline (piping) type is also available. - An M-thread type is also available.

• Hydraulic Equipment

It can control high-pressure micro flow rates.

• valve
• Hydraulic Equipment
• Other machine elements

This valve is a balance piston type and is used for electrically remote controlling the system pressure within hydraulic devices. There are three types: relief valve, sequence valve, and pressure reducing valve.

• valve
• Hydraulic Equipment
• Amplifier

This valve is a balance piston type and is used to electrically remotely control the system pressure within a hydraulic device. It is a reducing valve that can proportionally adjust the pilot pressure according to the electrical command signal, reducing the primary pressure to a stable secondary pressure for supply. 【Features】 - Flow in the reverse direction against control can be up to 50% of Qmax. - It also has an overload compensation function, operating as a relief valve when the secondary pressure exceeds the set value due to external forces.

• valve
• Hydraulic Equipment
• Other machine elements

This valve is a direct-acting pressure control valve that provides pressure proportional to an electrical signal. It is compact and can handle high pressure. It is resistant to surge pressure and has high durability. A pressure reducing valve is incorporated into the proportional control section, resulting in a small internal leakage amount and excellent precision.

• valve
• Hydraulic Equipment
• Amplifier

- This is a high-pressure inline pilot check valve with an internal drain and external pilot, operating at 40 to 70 MPa. - It features a ball seat type that excels in circuit closure, position holding, and pressure retention. - Drain piping is not required.

• valve
• Hydraulic Equipment
• Pipe Fittings

This type has three different housing shapes and can be installed in the piping system to meet any requirements, as it has threaded sections both internally and externally. These valves can also be used as foot valves in the pump's suction line due to their low response pressure.

• valve
• Hydraulic Equipment
• Other machine elements

It can be used for the installation of pressure gauges and monitoring equipment.

• Pipe Fittings
• Hydraulic Equipment

The electromagnetic proportional amplifier type EV is available in a module for DIN rail or a card type for card holders. By measuring the current on the valve output side, it can reflect a very accurate function. The electromagnetic proportional amplifier EV1M3 can be mounted on a 32 mm or 35 mm DIN rail using an additional card holder. With excellent control accuracy and precise current measurement, it can easily handle demanding hydraulic applications. The settings for valve parameters such as basic current, maximum current, deadband, and ramp are achieved using multi-turn potentiometers. Control parameters (Imin, Imax, deadband, ramp time) are set using a push button or potentiometer.

• Other process controls
• Hydraulic Equipment

- There are two types of ultra-compact steel diverter valves with a maximum operating pressure of 35 Pa: screw-in type and plate-mounted type. - It automatically controls to maintain equal flow rates even under uneven loading. - It is ideal for devices that require synchronization accuracy, such as lifters. - There are also types with different flow division ratios (1:2, 1:3, 1:5). - There are types compatible with ISO O-ring ports as well.

• Flow Control
• valve
• Hydraulic Equipment

The axial piston pump type V80M is designed for open circuit hydraulic systems mounted on vehicles and operates on the swash plate principle. An optional through-shaft type is also available for series connection with other hydraulic pumps.

• Other pumps
• Hydraulic Equipment
• Other machine elements