新光電子 List of Products and Services

The LED "H6 Series" achieves a high level of both high color rendering and high efficiency. The NFSW757H-V2H6 (Ra≥95, R9>80, TLCI90+) is an LED manufactured by Nichia Chemical, suitable for general-purpose lighting where color rendering, high efficiency, and long lifespan are required.

• Chip type LED

KI5544 is a transmissive photo sensor that employs an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. - Equipped with a strong lock mechanism to prevent disconnection - Compact size - Detection groove width: 5mm, slit width: 0.5mm - Two-screw mounting and other features. It is suitable for applications such as object passage detection in amusement machines, position detection of items, coin passage detection in automatic change dispensers and vending machines, and medical analysis equipment. For more details, please contact us or refer to the catalog.

• Sensors

The reflective photo sensor KR5500 is a dustproof type that can detect transparent objects, featuring an infrared light-emitting diode on the emitting side and a photo IC on the receiving side. It has a built-in amplifier, open collector output type, and a built-in LED limiting resistor, along with a connector equipped with a strong locking mechanism to prevent disconnection. Due to its visible light cut type, it is less susceptible to interference from ambient light. - Detection of bill and coin passage in automatic change machines and vending machines - Detection of object passage and position detection of items in amusement machines - Medical analysis equipment - Detection of object passage in card issuing machines and ticket vending machines It is suitable for various applications. For more details, please contact us or refer to the catalog.

• Sensors

The FAULHABER motion controller integrated brushless DC servo motor 2250...BX4 IMC RS/CO has a total length of 67.6 mm and an output shaft diameter of 22 mm. It can be set within a speed range of 1 ... 10500 (rpm) and can operate with a maximum torque of 54 (mNm).

• Brushless DC Motor

The FAULHABER motion controller integrated brushless DC servo motor 2232…BX4 IMC RS/CO has a total length of 49.6 mm and an output shaft diameter of 22 mm. It can be set within a speed range of 1 ... 13000 (rpm) and can operate with a maximum torque of 36 (mNm).

• Brushless DC Motor

NSPA510CS is an LED manufactured by Nichia Chemical that offers a variety of color tones and light distributions, enabling proposals tailored to various features.

• Bullet-shaped LED

NC5W321G is a highly reliable LED manufactured by Nichia Chemical that supports the high safety of vehicles.

• Chip type LED

NC4W321G is a highly reliable LED manufactured by Nichia Chemical that supports the high safety of vehicles.

• Chip type LED

NC3W321G is a highly reliable LED manufactured by Nichia Chemical that supports the high safety of vehicles.

• Chip type LED

The NC2W321G is a highly reliable LED manufactured by Nichia Chemical that supports the high safety of vehicles.

• Chip type LED

NSSM137A is a full-color display LED manufactured by Nichia Chemical, which can be selected according to the usage environment and application.

• Chip type LED

NSPR336JS is an LED manufactured by Nichia Chemical that can be selected according to the usage environment and application.

• Bullet-shaped LED

NSPG336JS is an LED manufactured by Nichia Chemical that can be selected according to the usage environment and application.

• Bullet-shaped LED

NSPB336JS is an LED manufactured by Nichia Chemical that can be selected based on the usage environment and application.

• Bullet-shaped LED

NSPR336HS is an LED manufactured by Nichia Chemical that can be selected according to the usage environment and application.

• Bullet-shaped LED

NSPG336HS is an LED manufactured by Nichia Chemical that can be selected based on the usage environment and application.

• Bullet-shaped LED

NSPB336HS is an LED manufactured by Nichia Chemical that can be selected according to the usage environment and application.

• Bullet-shaped LED

The NC2W121G-SC is a highly reliable LED manufactured by Nichia Chemical that supports the high safety of vehicles.

• Chip type LED

NC2W121G is a high-reliability LED manufactured by Nichia Chemical that supports the high safety of vehicles.

• Chip type LED

The NVSG219GL-L1 is an LED manufactured by Nichia Chemical that is suitable for general-purpose lighting requiring color rendering, high efficiency, and long lifespan.

• Chip type LED

The NVSE219GL-L1 is an LED manufactured by Nichia Chemical that is suitable for general-purpose lighting requiring color rendering, high efficiency, and long lifespan.

• Chip type LED

The NVSB219GL-L1 is an LED manufactured by Nichia Chemical, suitable for general-purpose lighting that requires color rendering, high efficiency, and long lifespan.

• Chip type LED

The NVSC219GL-L1 is an LED manufactured by Nichia Chemical that is suitable for general-purpose lighting requiring color rendering, high efficiency, and long lifespan.

• Chip type LED

Our company will celebrate its 50th anniversary on April 1, 2024. Since our founding, we have embraced the catchphrase "Pursuing the Opto Century" and have spent half a century doing so. The fact that we can confidently welcome the next 50 years is entirely due to the support of our business partners, employees and their families, and all those involved. We would like to express our deep gratitude once again. We would like to take this opportunity to extend our heartfelt thanks and ask for your continued support in the future.

• Sensors

The KI3060 and KI3061 are gap-width wide type dust-proof photo interrupters that use an infrared light-emitting diode on the emitting side and a modulated photo IC output on the receiving side. They feature a built-in amplifier and a deep groove type with a detection groove depth of 12.2mm. The wide detection groove width of 10mm allows for the detection of thicker objects. A photo transistor output type is also available. These devices can be used for object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and in OA equipment, among others. For more details, please contact us or refer to the catalog.

• Sensors
• Other electronic parts

The "KB3390" is a separated type photo sensor that employs an infrared light-emitting diode on the emitting side and a high-sensitivity phototransistor on the receiving side. It can also be used as standalone units for the receiving side and emitting side. 【Features】 ■ The gap between the emitting and receiving sides can be set arbitrarily (1~100mm) ■ Completely dustproof ■ Dust prevention structure inside the lens ■ Snap-in type For more details, please refer to the catalog or feel free to contact us.

• Sensors
• Other electronic parts
• Sensors

The "ultra-compact photo reflector KR3140," packaged in dimensions of 3.0mm (height) x 4.0mm (width) x 2.4mm (depth), not only contributes to the lightweight and compact design of the mounting board but also extends the focal length to 3mm, six times longer than our conventional product (KR3930, d=0.5mm), making mechanical design easier. Additionally, it employs a visible light-cut resin that is resistant to stray light, allowing it to be used even at the edges of the housing while functioning as a light sensor.

• Sensors

FAULHABER is a manufacturer established in Germany in 1947, possessing world-class technology in control equipment for ultra-miniature motors and more. FAULHABER's motors, drive control equipment, control systems, and other products are used in various advanced fields worldwide, including industrial control devices, automation, medical equipment, scientific instruments, transportation equipment, safety devices, and energy systems. The FAULHABER 2018 comprehensive catalog features a wide range of products, including DC micro motors, brushless DC motors, and motion control systems. Shinko Electronics Co., Ltd. serves as the official general agent in Japan, providing assistance with product inquiries, imports, and technical consultations. We are also able to accommodate requests for customization or new options depending on the quantity. Please feel free to contact us.

• DC Motor
• Brushless DC Motor
• Stepping motor

The through-type photo sensor, dust-proof type KI3520 and KI3521, features an infrared light-emitting diode on the emitting side and a photo IC output on the receiving side, with a double structure that includes an outer case cover and an inner detection slit. Its dust-proof design makes it resistant to the effects of dust. The package type is PCB mountable. It can be used for object passage detection in card machines and currency exchangers, as well as coin passage detection in vending machines and amusement devices, and in office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor, horizontal slit type KI3744, is a photo interrupter that uses an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. It features a horizontal slit design. The package type is PCB direct mount. It can be used for object passage detection in card machines, change machines, vending machines, amusement equipment for coin passage detection, OA equipment, and more. For more details, please contact us or refer to the catalog.

• Sensors

KI3994 is a photo interrupter that uses an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. The package type is a PCB direct-mount type. It can be used in card machines, currency exchange machines for object passage detection, coin passage detection in amusement machines, OA equipment, and more. For more details, please contact us or refer to the catalog.

• Sensors

KI5110 and KI5111 are compact photo interrupters with photo IC output. The package type is a screw-mounted connector type. They can be used for object passage detection in card devices, change machines, vending machines, coin passage detection in amusement equipment, paper passage detection in ticket machines, OA equipment, and more. For more details, please contact us or refer to the catalog.

• Sensors

KI5140 and KI5141 are compact photo interrupters with a dust-proof design and photo IC output. They are of the visible light cut type. The package type is a screw connector type. They can be used for card machines, object passage detection in currency exchange machines, coin passage detection in vending machines and amusement machines, paper passage detection in ticket vending machines, OA equipment, and more. For more details, please contact us or refer to the catalog.

• Sensors

The KB3880 is a separated type photo sensor that employs an infrared light-emitting diode on the emitting side and a high-sensitivity phototransistor on the receiving side. It can also be used as standalone units for the receiving side and emitting side. It is completely dustproof and features a structure to prevent dust from entering the lens. The package type is a connector type. It can be used for object passage detection in financial equipment, object passage detection in vending machines and ticket machines, paper presence detection in copiers and printers, timing detection, and object passage detection in various automatic machines. For more details, please contact us or refer to the catalog.

• Sensors

The KI3064 is a photo interrupter that uses an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. For more details, please contact us or refer to the catalog.

• Sensors

The KI3024 is a dustproof photo interrupter with an analog output. Its dustproof structure makes it resistant to the effects of dust. It features a snap structure for easy installation. It has high detection accuracy with a slit width of 0.5 mm. Being a visible light cut type, it is also less susceptible to interference from ambient light. It can be used for object passage detection in card machines and change machines, as well as coin passage detection in vending machines and amusement devices, and in OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

KI3110 and KI3111 are digital output photo interrupters. They have high detection accuracy, with a slit width of 0.25 mm. Due to their visible light cut type, they are less affected by stray light. They are built-in capacitor types between Vo and GND. They can be used for object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and paper passage detection in sales machines, as well as in OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

KI5220 and KI5221 are compact transmissive photo interrupters with photo IC output. - Compact size, detection groove width of 3.5mm - Built-in amplifier, open collector output type - Built-in Zener diode type (between Vout and GND) - Connector with a strong locking mechanism to prevent disconnection These features make them suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, paper passage detection in ticket machines, and OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

KI5230 and KI5231 are compact photo interrupters with a dust-proof design and photo IC output. - Dust-proof structure: Resistant to the effects of dust - Visible light cut type: Less susceptible to interference from ambient light - Built-in amplifier, open collector output type - Built-in LED current limiting resistor - Connector with a strong locking mechanism to prevent disconnection These features make them suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and paper passage detection in ticket vending machines, as well as in OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

The KI5240 is a photo interrupter that combines an infrared light-emitting diode on the emitting side and a photo IC (digital output) on the receiving side. - Easy installation with a snap structure - Wide detection groove width: 7mm - Deep detection groove: 10mm - Built-in amplifier, open collector output type - Built-in LED current limiting resistor type - Connector with a strong locking mechanism to prevent disconnection It has features such as these. For more details, please contact us or refer to the catalog.

• Sensors

The KI5264 is a compact photo interrupter with analog output and dust-proof design. For more details, please contact us or refer to the catalog.

• Sensors

KI5770 and KI5771 are dust-proof photo interrupters with digital output. Their dust-proof structure makes them less susceptible to the effects of dust. They have high detection accuracy, with a slit width of 0.5 mm. Being a visible light cut type, they are also less affected by stray light. They come with a built-in LED current limiting resistor. They can be used for object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and paper passage detection in ticket machines and office equipment. For more details, please contact us or refer to the catalog.

• Sensors

KI5774 is a dustproof photo interrupter with analog output. For more details, please contact us or refer to the catalog.

• Sensors

KI5780 and KI5781 are dust-proof type photo interrupters with digital output. Their dust-proof structure makes them resistant to the effects of dust. They have high detection accuracy, with a slit width of 0.5 mm. Being a visible light cut type, they are also less susceptible to interference from ambient light. They come with a built-in LED current limiting resistor. They can be used for object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and paper passage detection in ticket machines and OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

The KI5784 is a dust-proof photo interrupter with analog output. Its dust-proof structure makes it resistant to the effects of dust. It has high detection accuracy, with a slit width of 0.5 mm. Being a visible light cut type, it is also less susceptible to the effects of stray light. It can be used for object passage detection in card machines, change machines, coin passage detection in vending machines and amusement devices, as well as in OA equipment. For more details, please contact us or refer to the catalog.

• Sensors