新光電子 Product Lineup

NCSU434C (280nm) is the world's No. 1 high-output UV-LED manufactured by Nichia Chemical, achieving energy efficiency and long lifespan.

• Chip type LED

The LED "H6 Series" achieves a high level of both high color rendering and high efficiency. The NF2W757GR-V5H6 (H6 Series) is a Nichia Chemical manufactured LED suitable for general lighting applications that require color rendering, high efficiency, and long lifespan.

• Chip type LED

NSSW088B is a highly reliable LED manufactured by Nichia Chemical that supports the high safety of vehicles.

• Chip type LED

The separated type photo sensor, light modulation type KB5900 and 5901, is a separated photo sensor that employs an infrared light-emitting diode on the emitting side and a modulated photo IC on the receiving side. Due to its light modulation method, it is resistant to noise such as stray light and can detect over long distances (max. 2m). It is suitable for applications such as human passage detection, work detection and positioning in automated lines, and object passage detection in various automatic machines. For more details, please contact us or refer to the catalog.

• Sensors

The KB5921 is a separated type photo sensor with light modulation, featuring an infrared light-emitting diode on the emitting side and a modulated photo IC on the receiving side. Due to its light modulation method, it is resistant to noise from ambient light and can detect over long distances (max. 1.5m). It is suitable for applications such as human passage detection, workpiece detection and positioning in automated lines, and object passage detection in various automatic machines. For more details, please contact us or refer to the catalog.

• Sensors

The FAULHABER motion controller V3.0, MC 3603 S, is equipped with RS232/CAN or EtherCAT interfaces and can be operated with a supply voltage of 6 ... 36 (VDC) and a maximum current of 9 (A).

• DC Motor

NFSWL11A-D6 is an LED manufactured by Nichia Chemical that is suitable for general-purpose lighting where color rendering, high efficiency, and long lifespan are required.

• Chip type LED

The KR5015 reflective photo sensor is a high-resolution reflective photo sensor that combines a white light-emitting diode and an RGB color sensor. It features an RGB independent analog voltage output with a small detection spotlight type, equipped with an IR cut filter on the receiving side and a connector with a strong locking mechanism to prevent disconnection. It is suitable for applications such as mark detection for OMR and OCR. For more details, please contact us or refer to the catalog.

• Sensors

The LED "H6 Series" achieves a high level of both high color rendering and high efficiency. The NFCWL048B-V4H6 (H6 Series) is an LED manufactured by Nichia Chemical, suitable for general lighting applications that require color rendering, high efficiency, and long lifespan.

• Chip type LED

The LED "H6 Series" achieves a high level of both high color rendering and high efficiency. The NFCWT012B-V4H6 (H6 Series) is a Nichia Chemical manufactured LED suitable for general lighting applications that require color rendering, high efficiency, and long lifespan.

• Chip type LED

The FAULHABER planetary gear head, model 03B, has an outer diameter of 3.4mm and an output shaft diameter of 0.8mm. The gear train is made of steel and is available in several configurations with a reduction ratio ranging from 25:1 to 125:1. It can operate with a permissible torque of 0.88mNm for continuous operation and 1.32mNm for intermittent operation.

• DC Motor

LED-implemented products enable the provision of LED assembly products tailored to specific applications. The "high-brightness blue LED" was the first product introduced to the world by Nichia Chemical, and its high level of completeness, along with subsequent technological advancements in green, UV (ultraviolet), and other wavelengths, significantly expanded the utilization scenarios for LED light sources. However, even within lighting, there are various specifications for display and lamp applications, necessitating the provision of LED assembly products suited to specific uses. Our company has a strong connection with chip manufacturers due to our achievements in developing special wavelength LEDs, and we manufacture assembly products that other companies cannot provide, such as multi-wavelength LED board mounting and multi-element lighting for special environments like fishing lights.

• LED Module
• LED lighting

The KI3740 and KI3741 are horizontal slit-type photo interrupters that use an infrared light-emitting diode on the emitting side and a photo IC output on the receiving side. They are equipped with a built-in amplifier, with a detection groove width of 5mm and a horizontal slit width of 0.5mm. RoHS compliant versions are also available. They are suitable for applications such as object passage detection in card machines and currency exchange machines, coin detection in vending machines and amusement devices, and office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The KI1138 is a compact photo interrupter with a double structure featuring a case cover on the outside and a detection slit on the inside, designed for dust resistance and equipped with a two-beam photo IC output. - Built-in amplifier and pull-up resistor type - Dust-proof structure: resistant to dust influence - High detection accuracy: built-in slit width of 0.5mm - Less susceptible to stray light due to its visible light cut type - Built-in LED current limiting resistor type - Connector with a strong locking mechanism to prevent disconnection It is suitable for applications such as coin passage detection in amusement machines and vending machines. For more details, please contact us or refer to the catalog.

• Sensors

KI1215 and KI1216 are dust-proof photo interrupters that combine infrared light-emitting diodes and photodetectors with a photo IC (digital output). With a gap width of 13mm, they are ideal for detecting thick objects. RoHS-compliant versions are also available. They are suitable for applications such as object passage detection in card machines and currency exchange machines, coin detection in vending machines and amusement devices, toner bottle level detection in copiers and printers, and pachinko ball detection. For more details, please contact us or refer to the catalog.

• Sensors

The KI1220 is a photo interrupter that employs an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. It features a deep groove type with a detection groove depth of 12.2mm and a wide detection groove width of 13mm, allowing it to detect thicker objects. We also offer RoHS-compliant products. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin detection in vending machines and amusement devices, and office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor KI1221 is a photo interrupter that uses an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. It features a deep groove type with a detection groove depth of 6mm and a wide detection groove width of 4mm, making it a low-cost compact type. RoHS-compliant versions are also available. It is suitable for applications such as object passage detection in card machines and currency exchange machines, as well as in office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The gap-wide type through-beam photo sensor KI1222 is a photo interrupter that uses an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. It features a deep groove type with a detection groove depth of 12mm and a wide detection groove width of 10mm, allowing it to detect thicker objects. It is a visible light cut type. We also offer a photo IC type and RoHS compliant products. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The KI1223 is a gap-wide type through-beam photo sensor that uses an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. It features a deep groove type with a detection groove depth of 12mm and a wide detection groove width of 15mm, making it capable of detecting thicker objects. We also offer RoHS-compliant products. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor, gap width wide type KI1230 and 1231, is a photo interrupter that employs an infrared light-emitting diode on the emitting side and a photo IC output on the receiving side. It features a built-in amplifier and a built-in pull-up resistor. The deep groove type has a detection groove depth of 12mm and a wide detection groove width of 10mm, making it capable of detecting thicker objects. We also offer a photo transistor output type and RoHS compliant products. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The KI1232 is a dustproof type through-type photo sensor with a double structure featuring a case cover on the outside and a detection slit on the inside. Its dustproof design makes it less susceptible to the effects of dust. With a high detection accuracy and an internal slit width of 0.5mm, it is also a visible light cut type, making it less affected by stray light. Additionally, RoHS compliant versions are available. It is suitable for applications such as object passage detection in card machines and currency exchangers, coin passage detection in vending machines and amusement devices, paper passage detection in ticket vending machines, and OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor, gap width wide and dust-proof type KI1248, 1249, 1250, 1251, is a dust-proof photo interrupter with a double structure featuring a case cover on the outside and a detection slit on the inside, with a photo IC output. It has a built-in amplifier and is designed to be less affected by dust due to its dust-proof structure. The detection groove has a depth of 12.2mm and a wide groove width of 15mm, allowing it to detect even thick objects. Additionally, it is a visible light cut type, making it less susceptible to interference from ambient light. RoHS-compliant products are also available. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and toner bottle remaining amount detection in OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor, gap width wide type KI1300, 1301, 1302, 1303, is a photo interrupter that employs an infrared light-emitting diode on the emitting side and a photo IC output on the receiving side. It features a built-in LED current limiting resistor. With a high detection accuracy and a built-in slit width of 0.5mm, it is designed to cut visible light, making it less susceptible to interference from ambient light. RoHS-compliant versions are also available. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, paper passage detection in ticket vending machines, and various office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor, gap width wide type KI1305 and 1306, is a photo interrupter that combines an infrared light-emitting diode on the emitting side and a photo IC (digital output) on the receiving side. It features a built-in amplifier and an open collector output type. The detection groove depth is 12.2mm, and the groove width is 8mm, providing high detection accuracy with a built-in slit width of 0.8mm, and it includes a built-in LED limiting resistor. Other series include the photo transistor type KI1309 and RoHS compliant products. It is suitable for applications such as object passage detection in card devices and currency exchangers, coin passage detection in vending machines and amusement devices, paper passage detection in ticket vending machines, and OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor, gap wide type KI1309, is a photo interrupter that uses an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. It features a deep groove type with a detection groove depth of 12.2mm and a wide detection groove width of 8mm. Other series include the photo IC output types KI1305 and 1306, as well as RoHS-compliant products. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and paper passage detection in ticket vending machines, as well as OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

The gap-wide type through-beam photo sensor KI1314 is a photo interrupter that uses an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. The detection groove width is wide, measuring 8mm. Additionally, we offer other series including the photo IC output types KI1310 and 1311, as well as RoHS-compliant products. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor, model KI1400 and 1401, is a compact photo interrupter with a photo IC output that can be mounted in four directions. It features a built-in amplifier and an open collector output type, with an integrated LED current-limiting resistor. RoHS-compliant versions are also available. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and paper passage detection in ticket vending machines, as well as in OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

The KI1470 through-type photo sensor is a photo interrupter that uses an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. It is a low-cost, compact type. The detection groove depth is 5.5mm, and the detection groove width is 3mm. RoHS-compliant products are also available. It is suitable for applications such as object passage detection in card machines and currency exchange machines, as well as in office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

Through-type photo sensor, dustproof, and four-direction mounting type KI1600 and KI1601 are compact photo interrupters with a dustproof design and photo IC output. They feature a built-in amplifier and open collector output type, with an integrated LED current limiting resistor. Due to the visible light cut type, they are less susceptible to interference from ambient light. Additionally, RoHS-compliant versions are also available. They are suitable for applications such as object passage detection in card machines and change machines, coin passage detection in vending machines and amusement devices, paper passage detection in ticket vending machines, and OA equipment. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor, dust-proof type KI3300 and 3301, features a double structure with a case cover on the outside and a detection slit on the inside. It is a compact photo interrupter with a photo IC output. With a built-in amplifier, it has an open collector output type. The dust-proof design makes it less susceptible to dust interference. It has a high detection accuracy with an internal slit width of 0.5mm and is a visible light cut type, making it less affected by stray light. It is equipped with a built-in LED limiting resistor. RoHS compliant versions are also available. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, paper passage detection in ticket vending machines, and office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor, dustproof and drip-proof type KI3700, 3701, 3710, 3711, is a photo interrupter that combines an infrared light-emitting diode and a photodetector with a photo IC (digital output) to achieve dustproof and drip-proof performance. - Dustproof and drip-proof structure (equivalent to IP64) * Connector part - AALF non-drip-proof specification / AA02LF drip-proof specification - More affordable than FA sensors - Dustproof structure using visible light-cut resin - Connector with a strong locking mechanism to prevent disconnection - Detection gap of 8mm and depth of 18mm, capable of detecting large objects It is suitable for applications such as object detection in liquid usage areas of FA systems, medical devices, amusement machines, and vending machines. For more details, please contact us or refer to the catalog.

• Sensors

The through-type photo sensor, horizontal slit type KI3720, is a photo interrupter that uses an infrared light-emitting diode on the emitting side and a phototransistor on the receiving side. It features a positioning boss and has a high detection accuracy with a horizontal slit width of 0.2mm. RoHS-compliant versions are also available. It is suitable for applications such as object passage detection in card machines and currency exchange machines, coin passage detection in vending machines and amusement devices, and office automation equipment. For more details, please contact us or refer to the catalog.

• Sensors

The separated type photo sensor KB1240 and 1241 are equipped with an infrared light-emitting diode on the emitting side and a photo IC light-receiving element (digital output) on the receiving side. They can also be used as standalone units for the emitting and receiving sides. The gap between the emitting and receiving sides can be set arbitrarily (1 to 100 mm), and they are a low-cost type. Additionally, we offer other series such as the KB1242 with photo transistor output and RoHS-compliant products. They are suitable for applications such as object passage detection in vending machines and ticket machines, paper presence detection in copiers and printers, timing detection, and object passage detection in various automatic machines. For more details, please contact us or refer to the catalog.

• Sensors

The separated type photo sensor KB1242 is a separated photo sensor that uses an infrared light-emitting diode on the emitting side and a high-sensitivity phototransistor on the receiving side. It can also be used as a standalone unit for either the receiving side or the emitting side. The gap between the emitting and receiving sides can be set arbitrarily (1 to 100 mm), and it is a low-cost type. Additionally, we offer other series with photo IC output (digital output) such as KB1240 and KB1241, as well as RoHS compliant products. It is suitable for applications such as object passage detection in vending machines and ticket machines, paper presence detection in copiers and printers, timing detection, and object passage detection in various automatic machines. For more details, please contact us or refer to the catalog.

• Sensors

The KB1246 is a separation-type photo sensor with light modulation, featuring an infrared light-emitting diode on the emitting side and a modulated photo IC on the receiving side. The gap between the emitting and receiving sides can be set arbitrarily (max. 400mm), and due to its light modulation method, it is resistant to noise such as stray light, allowing for long-distance detection. The length of the lead wires and the type of connector can also be specified. It is a low-cost type and is smaller than the KB892. Additionally, it employs a connector with a strong locking mechanism to prevent disconnection. We also offer connector type KB1281 and a high-precision detection type with a built-in slit. It is suitable for applications such as object passage detection in amusement machines, work detection and positioning on automation lines, and object passage detection in various automatic machines. For more details, please contact us or refer to the catalog.

• Sensors

KB1281 and KB1581 are separated photo sensors that use infrared light-emitting diodes on the emitting side and modulated photo ICs on the receiving side for optical synchronous detection. For more details, please contact us or refer to the catalog.

• Sensors

The separated type photo sensor KB1284 features an infrared light-emitting diode on the emitting side and a high-sensitivity phototransistor on the receiving side. It can also be used as standalone units for either the receiving or emitting side. The gap between the emitting and receiving sides can be set arbitrarily (1 to 100 mm), and it is a low-cost type. Additionally, we offer other series such as the light-modulated photo IC output (digital output) KB1281 and RoHS-compliant products. It is suitable for applications such as object passage detection in vending machines and ticket machines, paper presence detection in copiers and printers, timing detection, and object passage detection in various automatic machines. For more details, please contact us or refer to the catalog.

• Sensors

The KB1700 is a separated type photo sensor with light modulation, featuring an infrared light-emitting diode on the emitting side and a modulated photo IC on the receiving side. It is a light-synchronized detection type photo sensor that allows for arbitrary setting of the gap between the emitting and receiving sides (max. 400mm). Due to its light modulation method, it is resistant to noise from external light interference, enabling long-distance detection. It is a low-cost type, and RoHS-compliant versions are also available. It is suitable for applications such as object passage detection in financial equipment, work detection and positioning on automated lines, and object passage detection in various automatic machines. For more details, please contact us or refer to the catalog.

• Sensors

The separated type photo sensor KB3290 features an infrared light-emitting diode on the emitting side and a highly sensitive phototransistor on the receiving side. It can be used as a standalone unit for both the receiving and emitting sides. The gap between the emitting and receiving sides can be set arbitrarily (1 to 100 mm), and it is a low-cost type. Additionally, RoHS-compliant products are also available. It is suitable for applications such as object passage detection in financial equipment, object passage detection in vending machines and ticket machines, paper presence detection in copiers and printers, timing detection, and object passage detection in various automatic machines. For more details, please contact us or refer to the catalog.

• Sensors

The reflective photo sensor KR864 and the light modulation types KR865 and KR866 are dust-proof photo reflectors that use infrared light-emitting diodes on the emitting side and photo ICs on the receiving side. Due to their dust-proof structure, they are easy to clean from paper dust and can also detect materials with low reflectivity, such as black paper and OHP film. The KR865 and KR866 are resistant to noise from ambient light due to their light modulation method. Additionally, RoHS-compliant versions are available. They are suitable for applications such as paper detection in copiers, printers, and various automatic machines for object passage detection. For more details, please contact us or refer to the catalog.

• Sensors

The reflective photo sensor KR894 / light modulation type KR895 is a dust-proof photo reflector that uses an infrared light-emitting diode on the emitting side and a photo IC or modulated photo IC on the receiving side. Its dust-proof structure makes it easy to remove paper dust and allows for the detection of materials with low reflectivity, such as black paper and OHP film. The KR895, due to its light modulation method, is resistant to noise from ambient light and other disturbances. RoHS-compliant products are also available. It is suitable for applications such as paper detection in copiers, printers, and printing machines, as well as object passage detection in various automatic machines. For more details, please contact us or refer to the catalog.

• Sensors

The KR1207 reflective photo sensor, light modulation type, is a dustproof photo reflector that employs an infrared light-emitting diode on the emitting side and a modulated photo IC light-receiving element on the receiving side. Its dustproof structure makes it easy to remove paper dust and allows for the detection of materials with low reflectivity, such as black paper and OHP film. Due to its light modulation method, it is resistant to noise from ambient light and other disturbances. It has a wide detection range and is a low-cost option. Additionally, RoHS-compliant versions are also available. It is suitable for applications such as paper detection in copiers, printers, and various automatic machines for object passage detection. For more details, please contact us or refer to the catalog.

• Sensors

The reflective photo sensor KR1218, 1219, 3920, and 3930 is a photo reflector that combines various light-emitting diodes from blue to infrared with a high-sensitivity phototransistor. RoHS-compliant products are also available. The package type is PCB direct mount, and the detection distance is 1mm. Additionally, the photo current (μA) of the electrical and optical characteristics (Ta=25℃) is 200min for KR1219, 400min for KR1218 and KR3930, and 800min for KR3920. For more details, please contact us or refer to the catalog.

• Sensors

KR1226 is a high-resolution photoreflector that combines a red light-emitting diode with a high-sensitivity phototransistor, while KR1227 combines an infrared light-emitting diode with a high-sensitivity phototransistor. It is a compact and low-cost type due to the use of aspheric lenses and is designed for printed circuit board mounting. It is suitable for applications such as simple barcode sensors, paper edge sensors, and mark detection for OMR/OCR, among others. For more details, please contact us or refer to the catalog.

• Sensors

KR1228 is a high-resolution photoreflector that combines a red LED and a near-infrared LED with a high-sensitivity phototransistor. It is a compact and low-cost type that utilizes a cylindrical lens and is designed for printed circuit board mounting. It is suitable for applications such as simple barcode sensors, paper edge sensors, and mark detection for OMR/OCR, among others. For more details, please contact us or refer to the catalog.

• Sensors