ファラッド List of Products and Services

Compatible with 500W and has a frequency upper limit of 8.5GHz. A microwave attenuator that can handle both 2.45GHz and 5.8GHz. Manufactured by Weinschel Associates, USA. *For more details, please refer to the PDF document or feel free to contact us.

• High frequency/microwave parts

A microwave attenuator compatible with 2kWCW (2000WCW) with a frequency limit of 2.5GHz (3GHz is also available). Manufactured by Weinschel Associates, USA. *For more details, please refer to the PDF document or feel free to contact us.

• High frequency/microwave parts

It is optimal to place it in front of a spectrum analyzer during EMC measurements to amplify weak signals. *For more details, please refer to the PDF document or feel free to contact us.*

• Other electronic measuring instruments

High-speed SAR (Specific Absorption Rate) measurement using a vector probe array method. *For more details, please refer to the PDF document or feel free to contact us.*

• EMC Testing

No zero adjustment required before measurement; easily measure by connecting to a PC with dedicated software. *For more details, please refer to the PDF document or feel free to contact us.

• Power meter

Using weak microwaves in the 1-2 GHz range, it is possible to measure moisture content (g/m²) with various sensors from WORK Company (Germany). Applications: paper, coffee, pharmaceuticals, tobacco, cheese, cake, wood, textiles, food ingredients, oil, etc. For example, measuring the moisture content of paper can be done quickly and without being affected by printing or coating. Measurements can also be taken during high-temperature drying of coffee and tea leaves, among others. *For more details, please refer to the PDF document or feel free to contact us.*

• Sensors

Chip size 4.2 x 1.3mm, 2V single power supply, 25mA low-noise amplifier. 25dB gain, with a dual (1 chip 2 LNA) type available for 2CH reception. Arralis also offers E-band, mixers, and switches up to SD8T, as well as W-band products in the 94GHz range. *For more details, please refer to the PDF document or feel free to contact us.

• Other semiconductors

The P/N: AT-P40B-3030 manufactured by Wright Technologies in the United States is a wideband 1W power amplifier operating at 20-40GHz. It amplifies small signals from SG to 1W, making it ideal for various tests. Gain is typically 30dB, P1dB is typically +30dBm, and OIP3 is typically +38dBm. Voltage is 12V. *For more details, please refer to the PDF document or feel free to contact us.*

• High frequency/microwave parts

White Gaussian Noise - Noise source with output of -17 to +13 dBm Frequency range: 10 Hz to 100 MHz (+13 dBm for each model), 1 GHz to 10 GHz (-17 to +10 dBm for each model) Operating temperature range: -35 to +100°C, standard input voltage +28 VDC (<1.5 GHz), +15 VDC (>1.5 GHz) Applications include secure communication, jamming, CATV/HDTV, 10GE, PCI Express, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

The WHNX6-2555-3500-26500-60CC is a high-pass filter manufactured by Wainwright in Germany. It attenuates 2.4GHz by 60dB and allows harmonics to pass from 3.5GHz to 24GHz (10 times the fundamental frequency). The insertion loss in the passband is 1.5dB, the return loss in the passband is 12dB, and it has a 3.5mm connector. It is used for measuring harmonics in 2.4GHz band wireless communication devices. *For more details, please refer to the PDF document or feel free to contact us.*

• High frequency/microwave parts

The CMIBPF23G-2G from Corry Micronics, USA, is an ultra-lightweight surface mount bandpass filter. It weighs approximately 0.0163 ounces (0.46 grams) with a passband of 22-24GHz. *For more details, please refer to the PDF document or feel free to contact us.*

• High frequency/microwave parts

Compact and lightweight, with modulation capabilities, wideband, and comes with dedicated software. *For more details, please refer to the PDF document or feel free to contact us.

• Signal Generator

CMIAT400M3GA153CH has announced an attenuator with low PIM (intermodulation distortion). It operates from 400 to 3000 MHz, with an attenuation of 15 dB, 3 channels, a maximum input of 100 WCW, and PIM of 160 dBc at 1850 MHz. It is intended for measuring wireless communication infrastructure such as DAS and 4G mobile networks. *For more details, please refer to the PDF document or feel free to contact us.*

• High frequency/microwave parts

R&K's high-frequency amplifiers have a rich track record for EMC, accelerators, and various electronic equipment testing. We can also accommodate various other frequencies and outputs. *For more details, please refer to the PDF document or feel free to contact us.

• Amplifier

Available for each waveguide band from the 260-410MHz model to the 75-110GHz model. You can choose between a waveguide interface or one with a coaxial converter. *For more details, please refer to the PDF document or feel free to contact us.

• antenna

Ideal for public safety, terrestrial mobile communications, and other multi-band radios, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other semiconductors