ケニックシステム List of Products and Services

The "KS-WVCT-I2" is an LCD controller IC for the Smart LCDC series designed for high-brightness WVGA liquid crystal displays. 【Main Features】 - Since it is not directly connected to the bus, it can be used with low-pin microcontrollers. It can also be used with 8-pin microcontrollers. - By using a microSD card, it can display up to 8,000 bitmap images at will. - It also integrates a touch panel controller and a 16-dot kanji font on a single chip. - It can render a maximum of 8,192 screens of "BMP images" or "JPEG images." (Please note that both "BMP images" and "JPEG images" cannot be registered in the serial flash memory.) - It is an LCD controller that allows for easy design changes. - It can quickly respond to discontinuation of LCD production or specification changes. *Custom orders for specific LCDs as requested by users are also accepted.

• Other semiconductors

This is the complete unit of the Smart LCDC series "UNT500WVC-02A" with a 5-inch WVGA high-brightness LCD. It is a complete set of hardware including the "LCD," "LCD controller board," and "panel unit."

• Other electronic parts

The "STK500WVC-02" is a starter kit from Maihai, featuring a 5-inch WVGA-sized LCD. It includes a touch panel LCD, an LCD controller board, a panel unit, various cables, and a CD-ROM. By using this starter kit, you can smoothly develop the LCD display section in a short period of time.

• Other electronic parts

This is the LCD controller board "LCDCWVC-02" equipped with the LCD controller "KS-WVCT-I2" for the Smart LCDC series WVGA high-brightness LCD. It supports 5-inch WVGA high-brightness LCDs. In the future, it is also planned to support 7-inch WVGA high-brightness LCDs.

• Other electronic parts

Our company is developing LCD controllers with the highest priority on being "easy to understand and easy to use." Although it appears to be a dedicated IC, it is a reprogrammable LSI, which brings various advantages. The image frame buffer appears as local memory from the microcontroller side, making software design very easy. 【Features】 ■ No supply instability ■ Based on reprogrammable LSI, allowing for custom orders ■ Prices are comparable to existing products ■ Supply format ■ In the future, we will provide easy-to-understand manuals and starter kits, offering products along with our know-how. *For more details, please refer to the PDF document or feel free to contact us.

• controller

This is the "UNT700WVC-01A," a complete unit driven by commands with a 7-inch WVGA LCD attached. It is a complete set of hardware including the "LCD," "LCD controller board," and "panel unit."

• Other semiconductors

This is the "KSS70MFBP-R," a resin-made 7-inch WVGA LCD panel unit. It comes as a complete set with a frame, mounting brackets, and screws. *For further details, please contact us.

• Other semiconductors

◆Must-See◆ Manufacturers who have hesitated to adopt due to long production periods Manufacturers who have hesitated to adopt due to low production quantities Manufacturers troubled by changes in LCD specifications 【What is Smart LCDC?】 It is a very convenient series of LCD controllers equipped with a command interpretation engine. It is a compact LSI dedicated to LCDs that incorporates various functions into a single chip. You can build small-scale systems at a low cost. 【Features of Kenic System's LCD Controllers】 - Even if the LCD is discontinued, there is no need to change the LCD controller IC or software. Additionally, if you adopt our recommended LCDs, we will introduce equivalent LCDs if that LCD is discontinued. - Available for purchase from 1 piece. - Custom orders are also possible. *The 4-panel comic "The Development Story of Smart LCDC" can be downloaded from the "PDF Download" link below.*

• controller
• Dedicated IC

This is the "KSS50MHFBP-R," a resin-made 5-inch WVGA LCD panel unit. It comes as a complete set with a frame, mounting brackets, and screws. *For further details, please contact us.

• Other semiconductors

◆Must-See◆ - Manufacturers struggling due to the discontinuation of LCD controller ICs from other companies - Manufacturers facing issues with the discontinuation of LCD production or specification changes 〇 This is an LCD controller IC designed for customers requiring small lots and long-term production. 〇 We also sell compatible LCDs along with the LCD controller. If you adopt our recommended LCDs, we can introduce equivalent LCDs in case the selected LCD is discontinued. 〇 Our products can generally be purchased starting from 1 piece. 【Smart LCDC Series (LCD Controller IC)】 This is a very convenient series of LCD controllers equipped with a command interpretation engine. It is a compact LSI dedicated to small LCDs that integrates various functions into a single chip, allowing for the cost-effective construction of small-scale systems.

• controller
• Dedicated IC

◆Must-See◆ - Manufacturers struggling to obtain LCD controller ICs - Manufacturers facing issues due to the discontinuation of LCD controller ICs from other companies - Manufacturers troubled by the discontinuation of LCD production or changes in specifications 〇 We are overcoming the global semiconductor long lead time issue. 〇 This product is designed for customers requiring small lots and long-term production. 〇 It offers a strong solution against the discontinuation of LCD production and the production halt of LCD controller IC devices. 〇 Our products can generally be purchased from as little as 1 piece. 【Smart LCDC Series (LCD Controller IC)】 This is a very convenient series of LCD controllers equipped with a command interpretation engine. It is a compact LSI dedicated to small LCDs that incorporates various functions into a single chip. It allows for the cost-effective construction of small-scale systems.

• controller
• Dedicated IC

We have a wealth of design assets and achievements, allowing us to meet various requests. We have particularly extensive experience with monitor ICs from Linear Technology and Lapis. It is also easy to create voltage monitoring displays using LCD monitor controllers ICs from our products. Our achievements include "electric vehicle experimental vehicles from major manufacturers," "cranes," "ships," "medical devices," "robots," "streetlights," and "deep-sea submersibles," among others.

• Power storage device

◆Must-See◆ - Manufacturers struggling to obtain LCD controller ICs - Manufacturers facing issues due to discontinuation of LCD controller ICs from other companies - Manufacturers troubled by discontinuation of LCD production or changes in specifications 〇 This product is designed for customers requiring small lots and long-term production. 〇 It provides a strong solution to the discontinuation of LCD production and the discontinuation of LCD controller IC devices. 〇 Our products can generally be purchased from 1 piece. 【Smart LCDC Series (LCD Controller IC)】 - A very convenient series of LCD controllers equipped with a command interpretation engine. - A compact LSI dedicated to small LCDs that incorporates various functions into a single chip. - Enables the cost-effective construction of small systems with LCDs.

• controller
• Dedicated IC

"KS-RLTPC" is a touch panel controller IC for "Fast LCDC" and "Standard LCDC." 【Main Features】 - Built-in 8-bit A/D conversion. - Automatically acquires the pressed X, Y coordinate data. - Operates with an internal oscillator, eliminating the need for a crystal oscillator or ceramic resonator. - The price range will be significantly reduced as it will be changed to the latest devices.

• Other electronic parts

◆Must-See◆ - Manufacturers struggling to obtain LCD controller ICs - Manufacturers facing difficulties due to the discontinuation of other companies' LCD controller ICs - Manufacturers troubled by the discontinuation of LCD production or changes in specifications 〇 This product is aimed at customers requiring small lots and long-term production. 〇 It provides a strong solution to the discontinuation of LCD production and the discontinuation of LCD controller IC devices. 〇 Our products can generally be purchased starting from 1 piece. 【Smart LCDC Series (LCD Controller IC)】 - A very convenient series of LCD controllers equipped with a command interpretation engine. - A compact LSI dedicated to small LCDs that integrates various functions into a single chip. - Enables the cost-effective construction of small systems with LCDs. <<New Product Information>> We are developing the successor to the touch panel controller IC for the "Fast LCDC" and "Standard LCDC" series, called "KS-RLTPC." Switching to the latest device will result in significant cost reductions compared to the previous model. Currently, we can provide samples of up to 5 pieces free of charge.

• controller
• Dedicated IC

The "STK350C-02" is a 3.5-inch version starter kit of the "Smart LCDC" series. The "STK350C-02" includes a touch panel LCD, an LCD controller board, various cables, and a CD-ROM. By using this starter kit, you can smoothly develop the LCD display section in a short period of time.

• controller

The "KS-350CT-I2" is an LCD controller for a 3.5-inch QVGA size IPS LCD in the Smart LCDC series. 【Main Features】 - Since it is not directly connected to the bus, you can use a low-pin microcontroller. An 8-pin microcontroller can also be used. - By using a microSD, you can display up to 8,000 bitmap images as desired. - It also integrates a touch panel controller and a 16-dot kanji font on a single chip. - It is an LCD controller that allows for easy design changes. - It can quickly respond to discontinuation of LCD production or specification changes. *For 3.5-inch LCDs, we also accept custom orders for specific LCDs as requested by the user, limited to QVGA.

• Other electronic parts

The "KS-LTWV-SDA/SDAI (LVDS)" is an LCD controller for WVGA TFT color LCDs with built-in LVDS. 【Features of Kenic System's LCD Controller】 - It is the definitive choice for "small lot and long-term production manufacturers." - It is an LCD controller that allows for easy design changes. - It can quickly respond to discontinuation of LCD production or specification changes. - Since it is "directly connected to the microcontroller bus," the image frame buffer appears as part of your local bus. - The power supply is a single 3.3V source.

• Other electronic parts

The "KS-LCTV-2PA (2PAI)" is an LCD controller for VGA-sized TFT color displays. 【Features of Kenic System's LCD Controllers】 - It is the definitive choice for "small lot and long-term production manufacturers." - The datasheet is concise at 40 pages! It is a very easy-to-understand controller. - It is an LCD controller that allows for easy design changes. - Custom controllers for your company can be made at a very low cost. Customization costs due to changes in LCD specifications can be done for just a few hundred thousand yen. - Additionally, even standard custom designs can be achieved in the range of one million yen. - It can quickly respond to production discontinuations or specification changes of the LCD. - The image frame buffer appears as "SRAM image" from the microcontroller side, making software design simple. - With "direct connection to the microcontroller bus," the mapping coordinates of the pixels and the addresses as seen from your CPU are completely "one-to-one correspondence." - The power supply is a single 3.3V source.

• Other electronic parts

The "KS-LDTW-2PI" is an LCD controller for a 4.3-inch TFT color LCD with WQVGA size. 【Features of Kenic System's LCD Controller】 - It is the definitive choice for "small lot and long-term production manufacturers." - The datasheet is concise, around 40 pages, making it a very easy-to-understand controller. - It is an LCD controller that allows for easy design changes. - It can quickly respond to discontinuation of LCD production or specification changes. - It connects directly to the microcontroller bus, making the image frame buffer appear on your local bus. - The power supply is a single 3.3V source.

• Other electronic parts

The "KS3224-LVP28" is an LCD controller for monochrome LCDs with a QVGA size. 【Features of Kenic System's LCD Controllers】 - It is the definitive choice for "small lot and long-term production manufacturers." - Most datasheets are concise, around 40 pages, making it a very easy-to-understand controller. - It is an LCD controller that can easily accommodate custom requests. - It can quickly respond to discontinuation of LCD production or specification changes. - Since it is "directly connected to the microcontroller bus," the image frame buffer appears on your local bus. - The power supply is a single 3.3V source.

• Other electronic parts

The "KS-LCTQ-2PA (2PAI)" is an LCD controller for TFT color LCDs in QVGA size. 【Features of Kenic System's LCD Controller】 - It is the definitive choice for "small lot and long-term production manufacturers." - The datasheet is concise at 40 pages! It is a very easy-to-understand controller. - It is an LCD controller that allows for easy design changes. - Custom controllers for your company can be made at a very low cost. Customization costs due to changes in LCD specifications can be done for just a few hundred thousand yen. - Additionally, even standard custom designs can be done for around one million yen. - It can quickly respond to production discontinuation or specification changes of the LCD. - The image frame buffer appears as "SRAM image" from the microcontroller side, making software design simple. - With "direct connection to the microcontroller bus," the mapping coordinates of the pixels and the addresses seen from the customer's CPU are completely "one-to-one correspondence." - The power supply is a single 3.3V supply.

• Other electronic parts

The "KS3224-LD29" is a low-cost LCD controller for 5.7-inch QVGA LCDs. It can be used with LCDs from Densitron and Tianma Japan. 【Features of Kenic System's LCD Controller】 - It is the definitive version for "small lot and long-term production manufacturers." - The datasheet is concise at 40 pages! It is a very easy-to-understand controller. - It is an LCD controller that allows for easy design changes. - Custom controllers for your company can be made at a very low cost. Customization costs due to changes in LCD specifications can be done for just a few hundred thousand yen. - Additionally, even standard custom designs can be done in the range of one million yen. - It can quickly respond to discontinuation of LCD production or specification changes. - The image frame buffer appears as "SRAM image" from the microcontroller side, making software design simple. - With "direct connection to the microcontroller bus," the pixel mapping coordinates and the addresses as seen from your CPU are completely "one-to-one correspondence." - The power supply is a single 3.3V source.

• Other electronic parts

The "KS3224-LACP29" is an LCD controller for a 5.7-inch color TFT LCD with a QVGA size. 【Features of Kenic System's LCD Controller】 - It is the definitive choice for "small lot and long-term production manufacturers." - The datasheet is concise at 40 pages! It is a very easy-to-understand controller. - It is an LCD controller that allows for easy design changes. - Custom controllers for your company can be made very affordably. Customization costs due to changes in LCD specifications can be done for just a few hundred thousand yen. - Additionally, even standard custom designs can be done for around one million yen. - It can quickly respond to discontinuation of LCD production or specification changes. - The image frame buffer appears as "SRAM image" from the microcontroller side, making software design simple. - With "direct connection to the microcontroller bus," the mapping coordinates of the pixels and the addresses seen from your CPU are completely "one-to-one correspondence." - The power supply is a single 3.3V supply.

• Other electronic parts

The "KS-LDTQ-2PI" is a high-function version of an LCD controller for a 5.7-inch TFT color LCD made by Denkitron, designed for QVGA size. 【Features of Kenic System's LCD Controller】 - It is the definitive choice for manufacturers looking for small lot and long-term production. - The datasheet is concise at 40 pages! It is a very easy-to-understand controller. - It is an LCD controller that allows for easy design changes. - Custom controllers for your company can be made at a very low cost. Customization costs due to changes in LCD specifications can be done for just a few hundred thousand yen. - Additionally, even standard custom designs can be achieved in the range of one million yen. - It can quickly respond to discontinuation of LCD production or specification changes. - The image frame buffer appears as "SRAM image" from the microcontroller side, making software design simple. - With "direct connection to the microcontroller bus," the mapping coordinates of the pixels and the addresses as seen from your CPU are completely "one-to-one correspondence." - The power supply is a single 3.3V supply.

• Other electronic parts

The "KS-LETQ-2P(2PI)" is an LCD controller for a 3.5-inch QVGA size TFT color LCD. 【Features of Kenic System's LCD Controller】 - It is the definitive choice for "small lot and long-term production manufacturers." - The datasheet is concise, around 40 pages, making it a very easy-to-understand controller. - It is an LCD controller that allows for easy design changes. - It can quickly respond to discontinuation of LCD production or specification changes. - Since it is "directly connected to the microcontroller bus," the image frame buffer appears as part of your local bus. - The power supply is a single 3.3V source.

• Other electronic parts

The "KSLBC-2" is an LED backlight power supply board for Kyocera's 5.7-inch LCD (LED backlight type). 【Features】 - It can be easily configured with a general-purpose microcontroller for ON/OFF and brightness adjustments. Additionally, it can be directly controlled from our LCD controller. - It uses a device with built-in overvoltage protection, so even if the LED is disconnected, the device is protected. - It is compact and lightweight, measuring 60×15mm. *For more details, please visit our website or contact us.

• controller

The "KSLBC-3" is an LED backlight power supply board that supports up to 6 strings. 【Features】 - It can simultaneously light up and dim up to 6 strings of LEDs. - ON/OFF and brightness adjustments can be easily set using a general-purpose microcontroller. - It uses devices with built-in overvoltage protection, so even if an LED is disconnected, the device is protected. - It is compact and lightweight, measuring 67×20mm.

• controller

The "KSLBC-3(K2)" is an LED backlight power supply board for high-brightness LCDs manufactured by Kyocera. 【Features】 - It can be easily configured using a general-purpose microcontroller for ON/OFF and brightness adjustment. - It uses devices with built-in overvoltage protection, so even if the LED is disconnected, the device is protected. - It is compact and lightweight, measuring 67×20mm.

• controller

The "CPU-328LTA-V" is a CPU board equipped with the SH7085, designed as a higher compatibility product for the "CPU-328LT-V" for the "KS-LCTV-2PBI/2PAI". A major feature is that all of Kenic System's backlight DC-DC converters can now be connected (*1). Additionally, the termination resistor for RS-485, which was previously an external component, can now be mounted as a chip resistor in the designated location. This board features the Renesas "SH7085" CPU, along with the LCD controller "KS-LCTV-2PBI/2PAI", Flash-ROM, SRAM, RS-232C, RS-485, E2PROM, and more. (*1) Note that the default brightness setting is "off" only when using KSLBC-2. * For further details, please refer to the datasheet or contact us.

• Other electronic parts

The "CPU-328LTA-Q" is a higher compatibility product of the "CPU-328LT-Q." It is a CPU board equipped with the SH7085 for the "KS-LCTQ-2PBI/2PAI." A major feature is that all of Kenic System's backlight DC-DC converters can now be connected (*1). Additionally, the termination resistor for RS-485, which was previously an external component, can now be mounted as a chip resistor in the designated location. This board is equipped with the Renesas "SH7085" CPU, an LCD controller "KS-LCTQ-2PBI/2PAI," Flash ROM, SRAM, RS-232C, RS-485, E2PROM, and more. (*1) Note that the default brightness setting is "off" only when using KSLBC-2. *For further details, please refer to the datasheet or contact us.

• Other electronic parts

The "CPU-324L" is a CPU board with an LCD controller for a 5.7-inch color TFT LCD of QVGA size. It features a Renesas "SH7145" CPU, an LCD controller "KS3224-LACP29," Flash ROM, SRAM, RS-232C, RS-485, E2PROM, and more. *For further details, please refer to the data sheet or contact us.

• controller

The "CPU-339L-2P" is a CPU board with an LCD controller for 3.5-inch color TFT LCDs manufactured by DENSITRON and SGD. It features a Renesas "SH7145" CPU, an LCD controller "KS-LETQ-2P(2PI)", Flash ROM, SRAM, RS-232C, RS-485, E2PROM, and more. *For further details, please refer to the datasheet or contact us.

• Other electronic parts

The "UNT-339L-2P" is a complete hardware product that includes a 3.5-inch touch panel LCD made by DENSITRON, a CPU board "CPU-339L-2P," and a full set of mounting hardware. *For more details, please contact us.

• Other electronic parts

It is the "KSS57TFP," an aluminum front panel for a 5.7-inch LCD.

• Other semiconductors

It is the "KSS57BP," an aluminum mounting bracket for a 5.7-inch LCD.

• Other semiconductors