ADLINKジャパン List of Products and Services

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows it to be controlled via a simple ASCII command and response protocol through a standard RS-485 interface, enabling control of all NuDAM modules within the RS-485 network. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection, enabling communication over RS-485 networks from distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows it to be controlled via a simple ASCII command and response protocol through a standard RS-485 interface, enabling control of all NuDAM modules within the RS-485 network. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows it to be controlled via a simple ASCII command and response protocol through a standard RS-485 interface, enabling control of all NuDAM modules within the RS-485 network. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection, enabling communication over distances of up to 4000 feet to an RS-485 network from a host computer. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows it to be controlled via a simple ASCII command and response protocol through a standard RS-485 interface, enabling control of all NuDAM modules within the RS-485 network. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, enabling the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows it to be controlled via a simple ASCII command and response protocol through a standard RS-485 interface, enabling control of all NuDAM modules within the RS-485 network. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection, enabling communication over RS-485 networks from distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

The ADLINK LPCIe-7230 is a 32-channel isolated input and/or card. It provides 2500 V optical isolation protection. The two wide input ranges of the LPCIe-7230 allow for easy sensing of external device states. Its non-polarity characteristics make it suitable for a wide range of industrial applications. The LPCIe-7230 device is also suitable for relay-driven industrial automation applications and features a wide output range of 5 to 35 V. Additionally, the LPCIe-7230 offers two interrupt sources on easily configurable digital input channels for users.

The LPCIe-7250 provides 8-CH SPDT (Form C) relay outputs and 8-CH isolated digital inputs. The state of each relay output is indicated by an onboard LED. When the relay is in the SET state, its corresponding LED is on, and it is off in the opposite case. All digital input channels are optically isolated and non-polarized, and can be configured depending on whether an RC filter is used. The LPCIe-7250 is suitable for collecting digital inputs in noisy environments.

The ADLINK PCI-7300A is a high-speed digital I/O card. It consists of 32 digital input/output channels. Its high-performance design and cutting-edge technology make this card ideal for a wide range of applications, including high-speed data transfer, digital pattern generation and digital pattern capture applications, and logic analyzer applications. Trigger signals are available to initiate data collection for pattern generation.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows it to be controlled via a simple ASCII command and response protocol through a standard RS-485 interface, enabling control of all NuDAM modules within the RS-485 network. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows it to be controlled via a simple ASCII command & response protocol through a standard RS-485 interface, enabling control of all NuDAM modules within the RS-485 network. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

ADLINK's DAQ-2010, DAQ-2005, and DAQ-2006 are simultaneous sampling multifunction DAQ cards that meet a wide range of application requirements. The devices can sample 4 AI channels simultaneously in a differential input configuration while maximizing noise reduction. They also provide waveform generation capabilities that can be used alongside analog input functions, offering 2CH, 12-bit analog output. If multiple analog input or output channels are needed, synchronization can be achieved with multiple cards via the SSI (System Synchronization Interface) bus. This is ideal for stimulus/response testing with the DAQ-2000 series. The DAQ-2000 series is equipped with analog and digital triggers, 24-CH programmable digital I/O lines, and a 2ch 16-bit general-purpose timer/counter. The automatic calibration feature adjusts for increases or shifts, eliminating the need for trim pot adjustments to calibrate the card.

The ADLINK DAQe-2200 series is a high-density, high-performance, multifunctional DAQ PCI Express card. The device can sample up to 64 AI channels with different gain settings and scan sequences. It is optimized for handling high-density analog signals with various input ranges and sampling speeds. These devices offer differential mode for 32 AI channels to achieve maximum noise reduction.

The ADLINK DAQe-2208 is a high-density, high-performance analog input card. The device can sample up to 96 AI channels with different gain settings and scan arrays. It is ideal for handling high-density analog signals with various input ranges and sampling speeds. These devices offer differential mode for 48 AI channels to achieve maximum noise reduction.

The ADLINK DAQe-2213/2214 can sample up to 16 AI channels with different gain settings and scan sequences. It is ideal for handling analog signals with various input ranges and sampling speeds. These devices offer differential mode for 8 AI channels to achieve maximum noise reduction.

The ADLINK DAQe-2500 series is a high-speed and high-performance analog output, multifunctional DAQ PCI Express card. The device can maintain simultaneous 12-bit analog output at 1 MS/s, updating up to 8 channels. The reference source and output polarity allow the ADLINK DAQe-2500 series DAQ card to generate complex modulated analog signals when combined with a multiplying DAC architecture, and it is programmable per channel. Hardware-based arbitrary waveform generation ensures that all analog outputs are updated at full speed, freeing the CPU from intervention, even if the waveform length is limited by dedicated system memory.

The ADLINK DAQe-2000 series is a simultaneous sampling multifunction PCI Express DAQ card that can extensively meet application requirements. The device can sample 4 AI channels in a differential input configuration to achieve maximum noise reduction simultaneously. It also provides waveform generation capabilities that can be used alongside analog input functions, with 2 channels of 12-bit analog output. If multiple analog input or output channels are needed, synchronization can be achieved with multiple cards via the SSI (System Synchronization Interface) bus. This is ideal for stimulus/response testing with the DUKE-2000 series.

The ADLINK DAQ-2204, DAQ-2205, and DAQ-2206 are high-density, high-performance multifunction DAQ cards. The devices can sample up to 64 AI channels with different gain settings and scan sequences. They are ideal for handling high-density analog signals with various input ranges and sampling speeds. Additionally, these devices feature a 24-CH programmable digital I/O, analog and digital triggers, waveform generation capabilities, and 2-CH 12-bit analog outputs, equipped with differential mode for 32 AI channels to achieve maximum noise reduction, as well as 2-CH 16-bit general-purpose timers/counters.

The ADLINK DAQ-2208 is a high-density, high-performance analog input card.

The ADLINK DAQe-2213/2214 is a low-cost, multifunctional DAQ card with 16 channels, 16-bit resolution, and a maximum sampling rate of 250 kS/s.

The ADLINK DAQ-2501 and DAQ-2502 are high-speed, high-performance analog output multifunction DAQ cards. The devices maintain 12-bit analog output simultaneously at 1 MS/s and can update up to 8 channels. The reference source and output polarity can be programmed for each channel, allowing the ADLINK DAQ-2500 series DAQ cards to generate complex modulated analog signals when combined with a multiplying DAC architecture. Hardware-based arbitrary waveform generation is achieved with all analog outputs updated at full speed, freeing the CPU from intervention even if the waveform length is limited by dedicated system memory. The DAQ-2500 series integrates up to 8 channels and features 400 kS/s, programmable polarity, 24 channels of programmable digital I/O lines, and 2 channels of 16-bit general-purpose timers along with 14-bit single-ended analog input/counters.

The ADLINK PXI-2010, PXI-2005, and PXI-2006 are multifunctional PXI modules for simultaneous sampling that meet a wide range of application requirements. The devices can sample four AI channels simultaneously with maximum noise reduction in a differential input configuration. They also provide waveform generation capabilities that can be used alongside analog input functions, as well as 2-channel, 12-bit analog output. If multiple analog input or output channels are needed, they can be synchronized across multiple cards via the PXI trigger bus. The PXI-2000 series is ideal for stimulus/response testing. The PXI-2000 series is equipped with analog and digital triggers, 24-channel programmable digital I/O lines, and a 2-channel 16-bit general-purpose timer/counter. The automatic calibration feature adjusts for increases or shifts, eliminating the need for trim pot adjustments to calibrate the module.

ADLINK's PXI-2204, PXI-2205, and PXI-2206 are high-density, high-performance multifunction PXI modules. These devices can sample up to 64 AI channels with different gain settings and scan sequences. They are ideal for handling high-density analog signals with various input ranges and sampling speeds. Additionally, the PXI-2200 series features analog and digital triggers, waveform generation capabilities, 2-CH 12-bit analog output, differential mode for 32 AI channels to achieve maximum noise reduction, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timers/counters.

The ADLINK PXI-2208 is a high-density, high-performance analog input module. This device is optimized for handling ultra-high-density analog signals with various input ranges and sampling speeds. It can upsample with various gain settings and scan sequences across 96 AI channels. These devices provide differential mode on 48 AI channels to achieve maximum noise reduction. The PXI-2208 features analog and digital triggers as well as 24-channel programmable digital I/O lines. Like all other lines in the PXI-2000 series, the PXI-2208 can perform analog input at full speed. Multiple modules can be synchronized via the PXI trigger bus. The auto-calibration feature eliminates the need to calibrate the module by adjusting the gain and trim pots, offsetting to the specified accuracy.

The ADLINK DAQ-2501 and DAQ-2502 are multifunctional PXI modules with high-speed and high-performance analog output. The devices maintain 12-bit analog output simultaneously at 1 MS/s and can update up to 8 channels. The reference source and output polarity are programmable for each channel, allowing the PXI-2500 series PXI modules to generate complex modulated analog signals in combination with a multiplying DAC architecture. Hardware-based arbitrary waveform generation ensures that all analog outputs are updated at full speed, freeing the CPU from intervention even if the waveform length is limited by dedicated system memory. The PXI-2500 series integrates up to 8 channels and features 400 kS/s, programmable polarity, 24-channel programmable digital I/O lines, and 2-channel 16-bit general-purpose timers along with 14-bit single-ended analog input/counter.

The USB-2401 is a USB DAQ module with universal inputs featuring 24-bit, 4-channel simultaneous sampling, built-in signal conditioning circuits, current output transducers, and direct measurement of commonly used sensors such as thermocouples, RTDs, load cells, and strain gauges. Individual channels can be programmed to measure different signal types. The USB-powered USB-2401 is equipped with removable screw terminal connectors for easy device connections, and the included multifunctional stand can be used for desktop, rail, or wall mounting. The USB-2401 is suitable for basic measurement applications requiring high resolution and accuracy, laboratory research material testing environments, and industrial temperature measurements. The included U-Test is a free, ready-to-use test program that comes with all ADLINK USB data acquisition (DAQ) series.

The USB-7230/7250 USB-based digital I/O modules support high voltage on/off control and monitoring, with an isolation voltage of 2500VRMS. The USB-7230 offers 32 channels of isolated digital I/O and 2 channels of frequency/event counters. The USB-7250 provides 8 channels of relay output (4 to C, 4 to A), 8 channels of isolated digital inputs, and 2 channels of frequency/event counters. The USB-driven USB-7230/7250 is equipped with removable screw terminals for easy device connections, and the included multifunction stand can be used for desktop, rail, or wall mounting. The USB-7230/7250 is suitable for industrial I/O control applications that require high voltage and excellent protection. The high isolation voltage protects against damage from accidental contact with external voltages and eliminates troublesome ground loops. The included U-Test is a free, ready-to-use testing program that comes with all ADLINK USB data acquisition (DAQ) series products.

The USB-2401 is a USB DAQ module with universal inputs featuring a built-in signal conditioning circuit for 24-bit, 4-channel simultaneous sampling, providing direct measurement of commonly used sensors such as current output transducers and thermocouples, as well as RTDs, load cells, and strain gauges. Each individual channel can be programmed to measure different signal types. The USB-powered USB-2401 is equipped with removable screw terminal connectors for easy device connections, and the included multifunctional stand can be used for desktop, rail, or wall mounting. The USB-2401 is suitable for basic measurement applications requiring high resolution and accuracy in laboratory research material testing environments and industrial temperature measurements. The included U-Test is a free, ready-to-use test program that comes with all ADLINK USB data acquisition (DAQ) series products.

The USB-1210 is a 16-bit high-speed USB 2.0-based DAQ module equipped with four analog input channels that provide simultaneous sampling at a maximum of 2 MS/s per channel. The USB-1210 offers excellent dynamic performance with high accuracy and maximum sampling rates, as well as flexible triggering capabilities. Additionally, the onboard 64M sample FIFO ensures that there is no data loss during acquisition, even under heavy CPU or system load. The USB-1210 features removable screw terminal connections for easy device connection powered by the USB bus. The included multifunctional stand can be used for desktop, rail, or wall mounting. Suitable for high-speed data acquisition in laboratory and medical research, the USB-1210 provides a reliable measurement solution at an affordable price.

The NuDAM module provides direct communication with a wide variety of sensors, performs signal conditioning, scaling, linearization, and conversion, and acquires measurements of temperature, pressure, flow, voltage, and current. It can handle multiple digital signal types widely used in IoT and other industrial applications, such as equipment monitoring, environmental monitoring, and industrial process control. The new ND-6117, ND-6124, ND-6150, and ND-6160 modules adopt Modbus/RTU as the best remote data transmission protocol, offering customers a comprehensive product.

The NuDAM module provides direct communication with a wide variety of sensors, performs signal conditioning, scaling, linearization, and conversion, and acquires measurements of temperature, pressure, flow, voltage, and current. It can handle multiple digital signal types widely used in IoT and other industrial applications, such as equipment monitoring, environmental monitoring, and industrial process control. The new ND-6117, ND-6124, ND-6150, and ND-6160 modules adopt Modbus/RTU as the best remote data transmission protocol, offering customers a comprehensive product.

The NuDAM module provides direct communication with a wide variety of sensors, performs signal conditioning, scaling, linearization, and conversion, and acquires measurements of temperature, pressure, flow, voltage, and current. It can handle multiple digital signal types widely used in IoT and other industrial applications, such as equipment monitoring, environmental monitoring, and industrial process control. The new ND-6117, ND-6124, ND-6150, and ND-6160 modules adopt Modbus/RTU as the best remote data transmission protocol, offering customers a comprehensive product.

The NuDAM module provides direct communication with a wide variety of sensors, performs signal conditioning, scaling, linearization, and conversion, and acquires measurements of temperature, pressure, flow, voltage, and current. It can handle multiple digital signal types widely used in IoT and other industrial applications such as equipment monitoring, environmental monitoring, and industrial process control. The new ND-6117, ND-6124, ND-6150, and ND-6160 modules adopt Modbus/RTU as the best remote data transmission protocol, offering customers a comprehensive product.