小森安全機研究所 List of Products and Services

The "LB-100" is an auxiliary device designed to ensure safety protection in hazardous areas, enhancing safety during operations that require close proximity to molds. It detects subtle finger intrusions using laser beams. It is effective as a safety measure when hands or fingers need to approach the danger limit while holding or processing materials. Additionally, mold changes and sensor positioning are easy. 【Features】 ■ Detects subtle finger intrusions with laser beams ■ Easy mold exchange mechanism ■ Simple sensor positioning ■ Effective as a safety measure when hands or fingers approach the danger limit ■ Can be installed on upward-acting press brakes *For more details, please refer to the catalog or feel free to contact us.

"Laser protection glasses" are glasses designed to protect the eyes of those engaged in laser work. They can be used while wearing prescription glasses. We offer a lineup including the over-glass type "YL-717," the flexible temple "YL-760" which allows for angle adjustment, and the elastomer cushion "YL-130." [Features] ■ Laser protection glasses that can be used while wearing regular glasses ■ Stick-on type laser shield ■ Laser barrier curtain *For more details, please refer to the catalog or feel free to contact us.

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of operators. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Adjusting the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points, safeguarding the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of operators. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) KOMORI Safety Device's laser-type safety equipment for press brakes (DSP-J, AP type LB-100) has a proven track record of implementing safety measures for over 1,300 press brakes. ★ We are currently offering a "Safety Newspaper" that summarizes the amendments to the Safety and Health Act (press-related laws) in an easy-to-understand manner. It introduces the points of attention for corporate safety personnel, along with the amendments such as the expansion of regulations from machine tools to general machinery, in a newspaper format. *For more details, please refer to the catalog or feel free to contact us.

The "DSP-J" is a safety device that creates a protective zone (area) with laser light and four detection points, safeguarding the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at a low closing speed (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

The "DSP-J" is a safety device that creates a protective zone (area) with laser light and four detection points to protect the hands and fingers of operators. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

■Work can be performed without reducing production efficiency In conventional safety devices, there was a tendency for work efficiency to decrease. With the DSP-AP, high-speed descent is possible up to a position of 2mm above the material plate, achieving high productivity. Additionally, since high-speed descent is possible up to a position of 2mm above the material plate, the range of high-speed monitoring has expanded, resulting in improved safety compared to conventional methods. ■Smooth operation with automatic plate thickness detection function In conventional safety devices, the upper die would sometimes stop. The DSP-AP, with its material detection function, can perform bending at the appropriate pressure point even if the material discharged from the roll machine is warped or has distortions. Furthermore, due to the planar laser projection, adjusting the optical axis and moving during mold changes is easy. ■Supports various workpieces such as box bending Mode 1: All zones active Mode 2: Central zone active mode (used during box bending) Mode 3: Front and central zone active mode In normal mode, even box bending work that would block the optical axis at the front can be processed in box bending mode, where only the center optical axis is active. Additionally, even if the system stops due to shading, processing can continue by re-pressing the operation foot switch to deactivate the optical axis. (Re-pressing processing)

The "Laser Tracker" is a material bending position display device that shows the bending position with a laser beam when attached to a press brake. It can correct positional deviations even without a back gauge, allowing for visual confirmation of the bending position, which contributes to reducing processing errors. Additionally, when used in conjunction with the "Laser Safety Device for Press Brakes," which immediately sends a stop signal upon detecting a person or object, efficient work can be performed while ensuring the safety of the operator. 【Laser Tracker Features】 - Can correct positional deviations in bending operations without a back gauge - Compact and practical, easy to install - Always allows for visual confirmation of the material processing position - Battery-operated, no wiring required *For more details, please refer to the materials. Feel free to contact us with any inquiries.

This document provides an explanation of the safety devices and effective operation of sheet metal processing machines. It introduces two safety devices: the "DSP-J type" safety device for laser press brakes and the "Area Sensor SLC type" safety device. [Contents] - Unique safety devices that balance workability and safety - Safety devices for laser press brakes - Protection for new area sensor robots and automated processing machines *For more details, please refer to the PDF document or feel free to contact us.

Features - Self-adjusting incremental optical scale measured with a stainless steel grid. - Maintains high precision and stable signal output even under high acceleration and vibration, possesses high mechanical resistance and thermal expansion properties, achieving consistent accuracy at all temperatures, particularly suitable for applications in synchronized press brakes. - The read head features a spring system for automatic cleaning, effectively removing dirt. Additionally, it is non-contact and frictionless, ensuring high durability and tolerance against environmental contamination. - Modular design with a maximum measurement length of 30,000 mm. Maximum resolution of 0.1 μm. Accuracy type: ±1 μm.