小森安全機研究所 List of Products and Services

The "N800 Series" is a load cell designed and developed with high functionality and low cost, replacing the conventional 4-channel monitors. It can instantly respond to complex user demands by adding various options, starting from simple load display. Additionally, it prevents overload on press machines. 【Features】 ■ Quality effect: Reduction of defect rates through proper load ■ 4-channel compact type ■ Easy setup with arrow key operation ■ 5-digit KN display ■ Ability to view one-shot waveforms on-site *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "N700 Series" is a load cell that significantly enhances the functionality of press forming load measurement with 1 and 2 channel support, achieving a low-cost type. Even with older press machines, stable quality control can be maintained thanks to the auto-zero function. Additionally, it is capable of outputting breakthrough waveforms, which are a quality issue in press processing. There are four load setting modes available to match the work. 【Features】 ■ Compact size for easy integration into equipment ■ Large digital display for easy reading of load cell tonnage ■ Easy setting of upper and lower load configurations with tuning knobs ■ Compatible with TT graph software ■ Waveform display possible on a computer *For more details, please refer to the catalog or feel free to contact us.

• Other weight measuring instruments

The "N500 Series" is a load cell for small two-channel presses that minimizes defect rates and setup times. It allows for accurate load display even on older presses and protects the press from overload. Additionally, by managing the numerical data, it helps to understand mold wear and abnormalities, significantly improving mold lifespan. 【Features】 ■ Freely selectable from four load setting modes ■ Easy setup with a tuning knob ■ Displays bar graphs, load values, production numbers, etc., on a digital display ■ Analog waveforms can be easily extracted from the recorder output ■ Uses a special sensor cable that is resistant to noise *For more details, please refer to the catalog or feel free to contact us.

• Press Dies

The "N500 Series" is a load cell for small two-channel presses that minimizes defect rates and setup times. It allows for accurate load readings even with older presses and protects the press from overload. Additionally, by managing the data, it helps to understand mold wear and abnormalities, significantly improving mold lifespan. 【Features】 ■ Freely selectable from four load setting modes ■ Easy setup with a tuning knob ■ Displays bar graph, load values, production numbers, etc., on a digital display ■ Analog waveforms can be easily extracted from the recorder output ■ Uses a special sensor cable that is resistant to noise *For more details, please refer to the catalog or feel free to contact us.

• Press Dies

The "N700 Series" is a load cell that significantly enhances the functionality of press forming load measurement with 1 and 2 channel support, achieving a low-cost type. Even with older press machines, stable quality control can be maintained thanks to the auto-zero function. Additionally, it is capable of outputting breakthrough waveforms, which are a quality concern in press processing. There are four load setting modes available to match the work requirements. 【Features】 ■ Compact size for easy integration into equipment ■ Large digital display for easy reading of load cell tonnage ■ Easy setting of upper and lower load limits with tuning knobs ■ Compatible with TT graph software ■ Waveform display possible on a computer *For more details, please refer to the catalog or feel free to contact us.

• Other weight measuring instruments

The "N800 Series" is a load cell designed and developed to be high-functionality and low-cost, replacing the conventional 4-channel monitors. It can instantly respond to users' complex demands by adding various options, from simple load display to more advanced features. Additionally, it prevents overload in press machines. 【Features】 ■ Quality effect: Reduction of defect rates due to proper load ■ 4-channel compact type ■ Easy setup with arrow key operation ■ 5-digit KN display ■ Ability to view one-shot waveforms on the spot *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "N800 Series" is a load cell designed and developed with high functionality and low cost, replacing the conventional 4-channel monitors. It can instantly respond to users' complex demands by adding various options, from simple load display to more advanced features. Additionally, it prevents overload in press machines. 【Features】 ■ Quality effect: Reduction of defect rates due to proper load ■ 4-channel compact type ■ Easy setup with arrow key operation ■ 5-digit KN display ■ Ability to view one-shot waveforms on the spot *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "N700 Series" is a load cell that significantly enhances the functionality of press forming load measurement with 1 and 2 channel support, achieving a low-cost type load cell. Even with older press machines, stable quality control can be maintained thanks to the auto-zero function. Additionally, it is capable of outputting breakthrough waveforms, which are often a quality issue in press processing. There are four load setting modes available to suit different tasks. 【Features】 ■ Compact size for easy integration into equipment ■ Large digital display for easy reading of load cell tonnage ■ Easy setting of upper and lower load limits with tuning knobs ■ Compatible with TT graph software ■ Waveform display possible on a computer *For more details, please refer to the catalog or feel free to contact us.

• Other weight measuring instruments

The "N500 Series" is a load cell for small two-channel presses that minimizes defect rates and setup times. It enables accurate load display even on older presses and protects the press from overload. Additionally, by managing the data, it helps to understand mold wear and abnormalities, significantly improving mold lifespan. 【Features】 ■ Freely selectable from four load setting modes ■ Easy setup with a tuning knob ■ Displays bar graphs, load values, production numbers, and more on a digital display ■ Analog waveforms can be easily extracted from the recorder output ■ Uses a special sensor cable that is resistant to noise *For more details, please refer to the catalog or feel free to contact us.

• Press Dies

The "N500 Series" is a load cell for small two-channel presses that minimizes defect rates and setup times. It allows for accurate load readings even with older presses and protects the press from overload. Additionally, by managing the data, it helps identify wear and abnormalities in molds, significantly improving mold lifespan. 【Features】 ■ Freely selectable from four load setting modes ■ Easy setup with a tuning knob ■ Displays bar graph, load values, production counts, and more on a digital display ■ Analog waveforms can be easily extracted from the recorder output ■ Uses a special sensor cable that is resistant to noise *For more details, please refer to the catalog or feel free to contact us.

• Press Dies

The "N700 Series" is a load cell that significantly enhances the functionality of press forming load measurement with 1 and 2 channel support, achieving a low-cost type load cell. Even with older press machines, stable quality control can be maintained thanks to the auto-zero function. Additionally, it is capable of outputting breakthrough waveforms, which are a quality issue in press processing. There are four load setting modes available to match the work requirements. 【Features】 ■ Compact size for easy integration into equipment ■ Large digital display for easy reading of load cell tonnage ■ Easy setting of upper and lower load limits with tuning knobs ■ Compatible with TT Graph software ■ Waveform display possible on a computer *For more details, please refer to the catalog or feel free to contact us.

• Other weight measuring instruments

The "N800 Series" is a load cell designed and developed to be high-performance and low-cost, replacing the conventional 4-channel monitors. It can instantly respond to users' complex demands by adding various options, from simple load display to more advanced features. Additionally, it prevents overload in press machines. 【Features】 ■ Quality effect: Reduction of defect rate due to proper load ■ 4-channel compact type ■ Easy setup with arrow key operation ■ 5-digit KN display ■ Ability to view one-shot waveforms on the spot *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "N800 Series" is a load cell designed and developed with high functionality and low cost, improving upon the conventional 4-channel monitors. It can instantly respond to users' complex demands by adding various options, starting from simple load display. Additionally, it prevents overload on press machines. 【Features】 ■ Quality effect: Reduction of defect rates due to proper load ■ Compact 4-channel type ■ Easy setup with arrow key operation ■ 5-digit KN display ■ Ability to view one-shot waveforms on the spot *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "N800 Series" is a load cell designed and developed with high functionality and low cost, improving upon the conventional 4-channel monitors. It can instantly respond to users' complex demands by adding various options, from simple load display to more advanced features. Additionally, it prevents overload on press machines. 【Features】 ■ Quality effect: Reduction of defect rates through proper load ■ Compact 4-channel type ■ Easy setup with arrow key operation ■ 5-digit KN display ■ Ability to view one-shot waveforms on-site *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "N700 Series" is a load cell that significantly enhances the functionality of press forming load cells with 1 and 2 channel support, achieving a low-cost type. Even with older press machines, stable quality control can be maintained thanks to the auto-zero function. Additionally, it is capable of outputting breakthrough waveforms, which are a quality issue in press processing. There are four load setting modes available to suit different tasks. 【Features】 ■ Compact size for easy integration into equipment ■ Large digital display for easy reading of load cell tonnage ■ Easy setting of upper and lower load limits with tuning knobs ■ Compatible with TT graph software ■ Waveform display possible on a computer *For more details, please refer to the catalog or feel free to contact us.

• Other weight measuring instruments

The "N500 Series" is a load cell for small two-channel presses that minimizes defect rates and setup times. It enables accurate load display even on older presses and protects the press from overload. Additionally, by managing the numerical data, it helps identify wear and abnormalities in molds, significantly improving mold lifespan. 【Features】 ■ Freely selectable from four load setting modes ■ Easy setup with a tuning knob ■ Displays bar graphs, load values, production counts, etc., on a digital display ■ Analog waveforms can be easily extracted from the recorder output ■ Uses a special sensor cable that is resistant to noise *For more details, please refer to the catalog or feel free to contact us.

• Press Dies

The "N700 Series" is a load cell that significantly enhances the functionality of press forming load measurement with 1 and 2 channel support, achieving a low-cost type load cell. Even with older press machines, stable quality control can be maintained thanks to the auto-zero function. Additionally, it is capable of outputting breakthrough waveforms, which are a quality issue in press processing. There are four load setting modes available to suit different tasks. 【Features】 ■ Compact size for easy integration into equipment ■ Large digital display for easy reading of load cell tonnage ■ Easy setting of upper and lower load limits with tuning knobs ■ Compatible with TT graph software ■ Waveform display possible on a computer *For more details, please refer to the catalog or feel free to contact us.

• Other weight measuring instruments

The "N500 Series" is a load cell for small two-channel presses that minimizes defect rates and setup time. It allows for accurate load display even with older presses and protects the press from overload. Additionally, by managing the numerical data, it helps identify mold wear and abnormalities, significantly improving mold lifespan. 【Features】 ■ Four load setting modes to choose from freely ■ Easy setup with a tuning knob ■ Displays bar graph, load values, production counts, and more on a digital display ■ Analog waveforms can be easily extracted from the recorder output ■ Uses a special sensor cable that is resistant to noise *For more details, please refer to the catalog or feel free to contact us.

• Press Dies

The "N800 Series" is a load cell designed and developed with high functionality and low cost, replacing the conventional 4-channel monitors. It can instantly respond to users' complex demands by adding various options, starting from simple load display. Additionally, it prevents overload on press machines. 【Features】 ■ Quality effect: Reduction of defect rates due to proper load ■ 4-channel compact type ■ Easy setup with arrow key operation ■ 5-digit KN display ■ Ability to view one-shot waveforms on-site *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "SLC440" is a light beam safety device that enables safe and efficient operation with three types of blanking modes: fixed blanking mode, variable edge area fixed blanking mode, and dual optical axis shielding mode. It can also be used with press brakes and can deactivate the optical axis when there are items like conveyor belts within the detection area. It offers a protective height of 140 to 1420 mm with a total of 17 sizes, and each size is available in two types with continuous shielding widths of 14 and 24 mm. It features a compact design with a cross-section of 28 × 33 mm. ■ Ministry of Health, Labour and Welfare certification numbers: TA562, TA563. *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

In the revision of the Labor Safety and Health Act in 2011, measures to prevent access to the danger limits of moving presses became necessary. The "EOS Series" is a newly designed safety device that eliminates blind spots and provides protection up to the corners, using an optical beam type. Utilizing advanced optical technology, it achieves a long detection distance and a compact body of 28×30mm. Additionally, the dual circuit within the sensor enhances safety by mutually monitoring the output. We offer the "EOS-J type," which can be installed on the sides, rear, and entire circumference of automatic presses, and the "EOS-JS type," which can be installed around the entire circumference of presses. 【Features】 ■ Achieves a long detection distance and a compact body ■ Enhanced IP65 dustproof and waterproof (oil) properties ■ Up to two auxiliary light axis sensors can be connected (optional at the time of order) ■ Response time: 20–30ms (Sensor 10–20ms + Control box 10ms) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "EOS Series" is a newly designed safety device that eliminates blind spots and provides protection to the corners with an EOS-type light beam. Utilizing advanced optical technology, it achieves a long detection distance and a compact body measuring 28×30mm. Additionally, the dual circuits within the sensor enhance safety by mutually monitoring the output. We offer the "EOS-JS type," which can be installed around the entire press, and the "EOS-J type," which can be installed on the sides and back of the press, as well as around the entire automatic press. 【Features】 ■ Achieves a long detection distance and a compact body ■ Enhanced IP65 dustproof and waterproof (oil) properties ■ Up to two auxiliary light axis sensors can be connected (optional at the time of order) ■ Response time: 20–30ms (Sensor 10–20ms + Control box 10ms) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "EOS Series" is a newly designed safety device with no blind spots, providing protection all the way to the corners using the EOS-type light beam safety system. Utilizing advanced optical technology, it achieves a long detection distance and a compact body of 28×30mm. Additionally, the dual circuits within the sensor enhance safety by mutually monitoring the output. We offer the "EOS-J type," which can be installed around the entire perimeter of the automatic press, and the "EOS-JS type," which can be installed around the entire perimeter of the press. 【Features】 ■ Achieves long detection distance and compact body ■ Enhanced IP65 dust and waterproof (oil) resistance ■ Up to two auxiliary light axis sensors can be connected (optional at the time of order) ■ Response time: 20–30ms (Sensor 10–20ms + Control box 10ms) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "EOS Series" is a newly designed safety device that eliminates blind spots and provides protection to the corners using an EOS-type light beam. Utilizing advanced optical technology, it achieves a long detection distance and a compact body measuring 28×30mm. Additionally, the dual circuit within the sensor enhances safety by mutually monitoring the output. We offer the "EOS-JS type," which can be installed around the entire perimeter of the press, and the "EOS-J type," which can be installed on the sides and back of the press, as well as around the entire perimeter of automatic presses. 【Features】 ■ Achieves a long detection distance and a compact body ■ Enhanced IP65 dust and waterproof (oil) resistance ■ Up to two auxiliary light axis sensors can be connected (optional at the time of order) ■ Response time: 20–30ms (Sensor 10–20ms + Control box 10ms) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "SLC440" is a light-type safety device that enables safe and efficient operation with three types of blanking modes: fixed blanking mode, variable edge area fixed blanking mode, and dual optical axis shielding mode. It can deactivate the optical axis when there are items like conveyor belts within the detection area. It is also usable with press brakes. The protective height ranges from 140 to 1420 mm, with a total of 17 sizes available, and each size comes in two types with continuous shielding widths of 14 and 24 mm. It features a compact design with a cross-section of 28 × 33 mm. ■ Ministry of Health, Labour and Welfare certification numbers: TA562, TA563. *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "SLC440" is a light beam safety device that enables safe and efficient work with three types of blanking modes: fixed blanking mode, variable edge area fixed blanking mode, and dual optical axis light shielding mode. 【Features】 ■ Relay contact monitoring monitor EDM that detects abnormalities in external relays ■ Easy-to-read and user-friendly 7-segment parameter display settings ■ Compact design ■ High visibility LED display ■ Ministry of Health, Labour and Welfare certification numbers: TA562, TA563 *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of operators. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Adjusting the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "Touch Start" is a capacitive touch switch that allows you to activate a press simply by touching the button with a light force, making it suitable for operations requiring both hands. It is certified by the Ministry of Health, Labour and Welfare, with certification number TA555. It is ideal for use as an operating switch for equipment involved in hazardous tasks such as press machines and cutting machines, helping to create a safe working environment. Compared to conventional push-button switches, it reduces the burden on operators by allowing operation with minimal force. Additionally, unlike general proximity switches, it is designed to respond to the capacitance of the human hand and includes a built-in malfunction prevention feature against noise. 【Features】 - Easy two-handed operation with just a touch - Significantly reduces the burden on operators - Increases work efficiency - Contributes to the prevention of occupational diseases such as tendonitis - Built-in malfunction prevention feature against noise *For more details, please refer to the catalog or feel free to contact us.

• switch
• Safety switch
• Switching Power Supply

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points, safeguarding the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of operators. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) KOMORI Safety Device's laser-type safety equipment for press brakes (DSP-J, AP type LB-100) has a proven track record of implementing safety measures for over 1,300 press brakes. ★ We are currently offering a "Safety Newspaper" that summarizes the amendments to the Safety and Health Act (press-related laws) in an easy-to-understand manner. It introduces the points of attention for corporate safety personnel, along with the amendments such as the expansion of regulations from machine tools to general machinery, in a newspaper format. *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "DSP-J" is a safety device that creates a protective zone (area) with laser light and four detection points, safeguarding the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at a low closing speed (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "DSP-J" is a safety device that creates a protective zone (area) using laser light and four detection points to protect the hands and fingers of the operator. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

This is a load cell capable of digital display necessary for load monitoring of press machines. You can accurately grasp the load value with the Auto Cell digital display. Please choose according to your capacity, from 1t to 2000t. Measuring the load is surprisingly easy; simply place the Auto Cell on the press for easy measurement. We encourage you to use this user-friendly and accurate Auto Cell.

• Other weight measuring instruments

The manual safety device is a mechanism that utilizes the downward movement of a slide to pull a cord, thereby pulling the hand of a worker wearing a wristband away from the danger zone. It is effective against issues such as double drops or unexpected drops of the slide, as it is mechanically linked to the slide's descent. Although it has a primitive mechanism, it is a reliable safety device. The DT/DF type of this safety device meets the press safety device structural standards and has passed the certification of the Ministry of Health, Labour and Welfare.

• Circuit breakers and switches

The "DSP-J" is a safety device that creates a protective zone (area) with laser light and four detection points to protect the hands and fingers of operators. Ministry of Health, Labour and Welfare Certification Number: TA501 It is compatible with box bending and small part bending, and the mounting bracket can be easily removed during mold changes. Aligning the optical axis is also simple. 【Features】 ■ Demonstrates effectiveness in safety measures for press brakes ■ Multi-axis laser ■ Capable of switching between two modes for flat bending and box bending operations ■ Easy mold changes ■ Inactive at low closing speeds (10mm/s) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "LB-100" is an auxiliary device designed to ensure safety protection in hazardous areas, enhancing safety during operations that require close proximity to molds. It detects subtle finger intrusions using laser beams. It is effective as a safety measure when hands or fingers need to approach the danger limit while holding or processing materials. Additionally, mold changes and sensor positioning are easy. 【Features】 ■ Detects subtle finger intrusions with laser beams ■ Easy mold exchange mechanism ■ Simple sensor positioning ■ Effective as a safety measure when hands or fingers approach the danger limit ■ Can be installed on upward-acting press brakes *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "SLC440" is a light beam safety device that enables safe and efficient operation with three types of blanking modes: fixed blanking mode, variable edge area fixed blanking mode, and dual-axis light shielding mode. It is equipped with a coating function to prevent mutual interference between adjacent sensor light axes. Additionally, the safety has been enhanced with three reset settings for the sensor's recovery operation after light shielding: auto reset, manual reset, and double confirmation manual reset. 【Features】 ■ Relay contact monitoring EDM that detects abnormalities in external relays ■ Easy-to-read and user-friendly 7-segment parameter display settings ■ Compact design ■ High visibility LED display ■ Ministry of Health, Labour and Welfare certification numbers: TA562, TA563 *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "EOS Series" is a newly designed safety device that eliminates blind spots and provides protection all the way to the corners using an EOS-type light beam. Utilizing advanced optical technology, it achieves a long detection distance and a compact body of 28×30mm. Additionally, the dual circuits within the sensor enhance safety by mutually monitoring the output. We offer the "EOS-JS type," which can be installed around the entire perimeter of the press, and the "EOS-J type," which can be installed on the sides and back of the press, as well as around the entire perimeter of automatic presses. 【Features】 ■ Achieves a long detection distance and a compact body ■ Enhanced IP65 dust and waterproof (oil) properties ■ Up to two auxiliary light axis sensors can be connected (optional at the time of order) ■ Response time: 20–30ms (Sensor 10–20ms + Control box 10ms) *For more details, please refer to the catalog or feel free to contact us.

• Other safety equipment

The "Admiral AX" is a 2-4 optical axis area sensor that smoothly protects hazardous areas while maximizing the benefits of production lines, such as processing machines, robots, and automated warehouses. By using corner mirrors, it enables protection on two or three sides. Additionally, it can be easily installed without any installation work. 【Features】 ■ Long detection distance of up to 60m ■ Easy installation work using a dedicated self-supporting stand (column) ■ Built-in EDM external device monitoring function ■ Selectable lockout function, auto-reset, and manual reset functions ■ Complies with international standards (IEC61496-1-2 Type 4) *For more details, please refer to the catalog or feel free to contact us.

• Area Sensor

Laser safety devices can set warning and protection areas on a surface. They are used in various locations, such as for internal intrusion protection in hazardous areas of turret punches, large presses, large machinery, and robots.

• Area Sensor

The "N800 Series" is a load cell designed and developed with high functionality and low cost, replacing the conventional 4-channel monitors. It can instantly respond to the user's complex demands by adding various options, starting from simple load display. Additionally, it prevents overload in press machines. 【Features】 ■ Quality effect: Reduction of defect rates due to proper load ■ 4-channel compact type ■ Easy setup with arrow key operation ■ 5-digit KN display ■ Ability to view one-shot waveforms on the spot *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "N500 Series" is a load cell for small two-channel presses that minimizes defect rates and setup times. It allows for accurate load display even with older presses and protects the press from overload. Additionally, by managing numerical data, it helps identify wear and abnormalities in molds, significantly improving mold lifespan. 【Features】 ■ Freely selectable from four load setting modes ■ Easy setup with a tuning knob ■ Displays bar graphs, load values, production counts, and more on a digital display ■ Analog waveforms can be easily extracted from the recorder output ■ Uses a special sensor cable that is resistant to noise *For more details, please refer to the catalog or feel free to contact us.

• Press Dies