カタリナ List of Products and Services

Equipped with an electric heater ideal for areas without hot water piping or where it cannot be used. The mutual convection fan operates along the entire length of the duct, boasting a speedy startup and high heat dissipation capability. 【Features】 ○ Rated AC200V 0.83kw・1.24kw・1.67kw points ○ High heating capacity ○ Heat dissipation capability quickly follows the fan speed ○ In case of improper operation or malfunction, the power to the electric heater is immediately cut off, ensuring a safe design that prevents overheating ○ Can be installed in areas without hot water piping ● For other functions and details, please contact us.

• Other air conditioning equipment

This is a slim-line duct heater with a depth of 92mm, and it is a fanless type. It is ideal to install it along the window glass for use as an auxiliary heating device. 【Features】 - Cools air falling down is warmed by the convector, allowing warm air to rise naturally. - Prevents window condensation. - Ideal for use as an auxiliary heating device. - Also available in non-standard sizes (depths of 120, 150, and 200mm) and various widths (NKV type). For other functions and details, please contact us.

• Other air conditioning equipment

The cross-flow fan of the mutual convection operates along the entire length of the duct. It delivers high-temperature output not only at normal fan speed but also at low fan speed. The operating noise is low, making it suitable for use in quiet environments. 【Features】 ○ Quick startup ○ Draws in cold air to enhance heating efficiency ○ Recommended for use as an auxiliary heating device ● For other functions and details, please download the catalog.

• Other air conditioning equipment

The device itself and the grill (grid-like mesh) are integrated, creating a design that makes the space appear sharp. Since the grill and the heating element part are hinged, they can be easily lifted for thorough cleaning. 【Features】 ○ Quick and easy to clean (ideal for environments with strict hygiene management) ○ Available in a wide range of sizes ○ Ideal for use as an auxiliary heating device ● For other functions and details, please download the catalog.

• Other air conditioning equipment

This is a high-output main heating system ideally suited for installation in areas with tall window glass. The S-shaped brackets and airflow induction walls within the system have been developed over several years to ensure the most optimal installation and heating output. 【Features】 - Equipped with galvanized steel convection units - Made to order - Immediate installation available - Can also be used as a main heating unit - Draws in cold air to enhance heating efficiency - Can be produced with groove widths ranging from 205 to 705 mm - Can be produced with groove heights ranging from 200 to 600 mm ● For other functions and details, please contact us.

• Other air conditioning equipment

With very low operating noise, it provides high-level cooling and heating throughout every corner of the room. The separation jet function prevents the incoming and outgoing air from mixing, enhancing efficiency. Available in two-pipe and four-pipe systems. 【Features】 ○ Dual heating and cooling ○ Equipped with air filter ○ Adjustable angle convection device for directing outgoing air ○ Condensate drainage function within the unit ● For other functions and details, please contact us.

• Other air conditioning equipment

We provide a combination of heating and ventilation. The large heat dissipation openings ensure the necessary ventilation volume without causing discomfort from the low-temperature fresh outside air. 【Features】 ○ Ideal combination of heating and ventilation ○ Comfortable airflow speed of 0.3 m/s or less ○ Ideal for use as an auxiliary heating device ● For other functions and details, please contact us.

• Other air conditioning equipment

The high-performance CR thermostat and mixing valve for primary control are ideal for hospitals, elderly care and welfare facilities, sports facilities, and production facilities. In hospitals and elderly care and welfare facilities, they are suitable for group control measures such as "legionella prevention" and "burn prevention." In sports facilities, they are appropriate for primary control of "forced showers, multi-shower systems," and "vanity sinks." In production facilities, they are suitable for individually controlling high-temperature water to the appropriate temperature. For more details, please contact us or download the catalog.

• valve

The bathtub optimal temperature water supply unit, featuring a high-performance CR thermostat and mixing valve, is ideal for hospitals, nursing homes, welfare and care facilities, sports facilities, and production facilities. The automatic optimal temperature water supply CRMH series comes with a stop valve and electric valve. Additionally, it includes a strainer, check valve, and thermometer (the primary side thermometer is optional). The maximum operating pressure is 0.5 MPa, and the minimum operating pressure is 0.05 MPa. The maximum operating temperature is 85°C, the minimum operating temperature is 5°C, and the minimum temperature difference is 10°C. For more details, please contact us or download the catalog.

• valve

The CRESY series circulation thermostat for medium temperature water circulation lines is ideal for situations where the hot water supply temperature is too high and dangerous, or when the system's hot water capacity is small. The unit includes a thermo mixing valve, check valve, thermometer, Y-type strainer, return valve, and flow meter. The CRESY50 circulation hot water mixing thermostat is the standard specification. For more details, please contact us or download the catalog.

• valve

The washbasin thermostat Catalina Thermomixer is available in types 32, 42, and 52. It can be used with under-basin and general mixing faucets. The connection diameters are 15A for the inlet and 15A (20A) for the outlet. The materials used are BC and others (body), and a special resin that suppresses lime scale adhesion (thermo cartridge). The minimum operating pressure is 0.01MPa for both hot and cold water, and the maximum operating pressure is 1.0MPa for both hot and cold water. The maximum operating temperature is 85°C, the minimum operating temperature is 5°C, and the temperature setting range is 15 to 55°C. For more details, please contact us or download the catalog.

• valve

The Thermostat for Mixing Hot and Cold Water, Thermix Tandem Type, is a stop-type thermostat for mixing hot and cold water. There are TYUM series and TYUMS series. The maximum operating pressure is 0.4 MPa, and the minimum operating pressure is 0.02 MPa. For more details, please contact us or download the catalog.

• valve

The warm water management equipment series, made of stainless steel, features column showers that can accommodate multiple users simultaneously. You can choose from various types, ranging from high-capacity (25L/min) to low-capacity (6L/min). They can be installed for both open spaces and closed environments. They can be widely installed in various venues such as sports arenas, gyms, beaches, and accommodation facilities, with options available for small groups, accommodating 2 to 6 people. For more details, please contact us or download the catalog.

• others

Leonard Coin-style showers, including corner, panel, booth types, and integrated changing room models, offer a variety of temperature control and shower water discharge operation differences. We have a wide range of models available. For more details, please contact us or download the catalog.

• others

The socket-type ball valve has an exterior that is not much different from the outer diameter of the connected pipe, and without a handle, it blends into the system to the extent that it is difficult to distinguish at first glance. Additionally, it reduces installation labor and does not require space as a valve, making it compact. The ball and spindle are integrally molded, and on the opposite side of the spindle, there is a projection that prevents the ball from shifting and fixes the rotation angle of the ball at 90°. Since the ball's vertical position is fixed, there are no leaks or uneven wear caused by ball displacement. For more details, please contact us or download the catalog.

• Pipe Fittings

The direct-reading flow control valve, Flow Setter, inline type, is a flow control valve that allows for easy adjustment of circuit balance while monitoring flow in systems such as heating, air conditioning, and cooling. The maximum operating temperature is 100°C, the maximum operating pressure is 1MPa (10kg/cm²), and the measurement accuracy is ±10% of the maximum flow rate for each model. The applicable fluids are water (including rust inhibitors and antifreeze), hot water, and cooling water. For more details, please contact us or download the catalog.

• Flow Meter

The bath and pool circulation fittings are used for water intake and discharge, as well as for connecting two or more tanks. Please use them appropriately, taking into consideration the intended use, the material of the bathtub or pool, water quality, and structural constraints. For more details, please contact us or download the catalog.

• others

The bathing area and pool circulation fittings for the jet bath are made entirely of stainless steel, both the main body and the head, featuring jet nozzles with excellent corrosion resistance. They are high-quality products made using the lost-wax process. Available options include single nozzles, double nozzles connected in pairs, and triple nozzles connected in threes. We also offer models with waterproof plates. For more details, please contact us or download the catalog.

• others

The corner pipe type and box type vibramats blow air sent from the blower into small bubbles that are released from the bottom of the bathtub. The blower sends a large amount of air. Additionally, the air supply pipe needs to be raised at least 500mm above the water surface to prevent backflow of the bathtub water when the blower is stopped. There are two types of vibramats: corner pipe type and box type. The box type mat is designed to be shaped like a box, with only a single stainless steel plate visible on the bottom surface of the bathtub, giving it a luxurious feel. We can accommodate specified dimensions within the range of what can be manufactured. For more details, please contact us or download the catalog.

• Piping Materials

The stainless steel SHCS type hair catcher is a dust collector that captures threads, hair, leaves, and debris before the pump while circulating hot or cold water in bathtubs, pools, ponds, and aquariums. Please install it in a position close to the pump with the lid facing upwards. Regular cleaning is necessary, so choose a location that allows easy access for people and has drainage capabilities. The maximum operating pressure is 3 kgf/cm², and the maximum operating temperature is 60°C. For more details, please contact us or download the catalog.

• Piping Materials

The Uta-se nozzle LU-25 and LUTS-25 come with various nozzles to suit different usage conditions. The material is SUS304, and the surface finish is #400 buff polished. The operation sequence is as follows: when the push button switch is pressed, warm water is discharged from the Uta-se nozzle. Pressing the push button switch again or the timer timing out will stop the water discharge and drain the stagnant water in the piping. Additionally, in the event of detecting an abnormal high temperature, the water discharge will stop, and drainage and an alarm will be activated. For more details, please contact us or download the catalog.

• nozzle

The large digital thermometer TDU-010, round wall-mounted type, features a highly visible large high-brightness LED. It is waterproof, making it suitable for installation in bathrooms. Its slim design allows for easy wall mounting. It has a safe design with a 10V specification. Additionally, we offer a titanium temperature sensor for hot springs (standard SUS316). For more details, please contact us or download the catalog.

• Thermometer

The "CRE/CRMH series" is an optimal hot water mixing device for hospitals, nursing facilities, sports facilities, and production facilities. The "CRE series" is ideal for controlling hot water supply in hospitals, nursing facilities, and various sports facilities, including both main control and individual control. Additionally, the "CRMH series" is equipped with electric valves and is suitable for filling various bathing areas and pools. 【Applications】 ■CRE Series - Hospitals and medical facilities For group control measures against Legionella bacteria and burn prevention - Sports facilities For main control of forced/combined showers and washbasins - Production equipment For individual control of high-temperature water to suitable temperatures ■CRMH Series For filling various bathing areas and pools *For more details, please download the catalog or contact us.

• valve