太洋電機産業 List of Products and Services

Adhesion of materials such as polypropylene and polyethylene can be easily done with a single action of pressing the lever. The adjustment of the dial (timer circuit) allows for uniform adhesion from thin to thick materials. It has excellent durability and stability with a metal body.

• Other machine elements

The "HE-110" is a hot slide cutter that can be used for heat cutting processing of nylon gardening nets, fishing nets, promotional flags, and more. After processing, the cut edges do not fray. When used in conjunction with the power controller "PC-11," you can operate it at a lower tip temperature. *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• cutter

The "HA-400" is a heater specifically designed for bending acrylic sheets. With a positioning plate and gauge, it allows for easy holding and positioning of the bending location for acrylic sheets. It is suitable for processing large acrylic sheets. 【Specifications】 ■ Rated Voltage: 100V AC 50/60Hz ■ Power Consumption: 65W ■ Heater Temperature: Approximately 220℃ ■ Heater: Sheath Heater ■ Gauge Setting Dimensions: 70−450mm ■ Maximum Bending Width: 400mm ■ Power Cord Length: 1.5m ■ Size: 640(W)×60(H)×60(D)mm ■ Weight: 2.0kg *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other processing machines

- You can freely set the temperature with the volume, allowing for optimal working conditions. - Due to zero-cross control (time proportional), output noise is significantly reduced. - The LED lamp lights up when the heater is powered on. - Comes with a scraping squeegee. - Size of the cavity: φ34 (inner diameter) × 32 (D) mm.

• EMS
• Other electronic parts
• Electrical equipment parts

The "POT-50C" is a lead-free solder pot suitable for pre-soldering of transformer leads and soldering of small printed circuit boards. It enables reliable temperature management through PID control. The temperature of the solder pot can be set from room temperature to 500°C. It features a safe design with a low case temperature. 【Features】 ■ Reliable temperature management through PID control (ON-OFF control possible via sensor feedback) ■ Temperature of the solder pot can be set from room temperature to 500°C ■ Secure temperature management with a digital key lock ■ Safe design with a low case temperature ■ Twin digital display *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Soldering Equipment

Ideal for lead-free solder! Economical long-life solder pot Precise temperature control with PID control Easy maintenance as the pot and heater are separate, making heater replacement effortless

• EMS
• Other electronic parts
• Electrical equipment parts

●PID Control Achieves precise temperature management. ●Twin Digital Display Allows simultaneous confirmation of set temperature and measured temperature. ●Easy Heater Replacement The separation of the solder pot and heater allows for easy replacement. ■Demo units are available for loan. Please check the detailed URL and contact your nearest sales department. *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

● Thanks to PID control, the measured temperature quickly approaches the set temperature regardless of disturbances such as changes in solder amount, ambient temperature, or changes in temperature settings, ultimately resulting in almost no deviation. ● It features a digital display that shows both the set temperature and the measured temperature simultaneously. ● Equipped with a sleeve heater (POT-350C). ● Includes upper and lower limit alarm lamps. ● With the optional PC loader, it is possible to manage settings and record temperature data via a computer connection. (POT-50C, 51C, 75C, 76C) ● The solder bath and heater are separate, making heater replacement easy. (POT-100C/200C)

• Other processing machines

This product is an electrostatic discharge mat that can be cut to your desired length. WD-130: 10m roll WD-13: 2m roll ● Double structure of electrostatic dispersion layer and conductive layer The double structure consists of an electrostatic dispersion layer (green) approximately 0.5mm thick and a conductive layer (black) approximately 1.5mm thick. ● Matte green color It can be used on both workbenches and floors. Being made of rubber, it is elastic and can be cut to fit the shape of desks and other surfaces. ● Complies with ROHS2. * It can also be used in conjunction with optional items. * For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This is a special tip cleaner that makes it difficult for the tip temperature to drop. The main body is made of heat-resistant silicone rubber with a special shape that prevents slipping and prevents solder from scattering.

• Other machine elements

The "ST-45" is a polishing rubber made from natural materials that removes dirt from soldering tips by rubbing. It can restore the "stickiness" of solder. The size is 40(W)×60(H)×20(D)mm, and the weight is 70g. 【Specifications】 ■Material: Natural rubber, abrasive (grit #60) ■Size: 40(W)×60(H)×20(D)mm ■Weight: 70g ■RoHS compliant *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This tip refresher removes the oxidized material from the blackened soldering iron tip using the action of an activator, re-coats it with tin, and restores the "stickiness" of the solder. The main component is a substance subject to the PRTR law.

• Other environmental equipment

● The connection part of the slit-type perforated board can be cut. ● It can be cut with light force, and the structure minimizes stress on the board. ● Recommended for Bakelite, paper epoxy, and glass epoxy (CEM-3).

• Other machine elements

● Flat Cut The cutting surface is cut in a horizontal state. There is no worry about impact on the main body of the parts during cutting operations of precision component lead wires. ● Comes with a clip to prevent scattering of cut lead wires. (YN-10AS) * Please do not use for cutting materials other than copper wire. * For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Resin processing machine