CBCオプテックス Product Lineup

● Extension Tube Kit Model Number: VM100 Usage: To be attached between the lens and camera for close-up photography 0.5mm, 1mm, 5mm, 10mm, 20mm, 40mm ● Adapter Ring (5mm) Model Number: VM400 Usage: To be attached when using C-mount lenses with CS-mount cameras. ● 1.5x Extender (for CS mount) Model Number: EX1.5CS Usage: To be attached between the lens and camera to increase the focal length by 1.5 times. ● 2x Extender (for CS mount) Model Number: EX2CS Usage: To be attached between the lens and camera to double the focal length. ● 1.5x Extender (for C mount) Model Number: EX1.5C Usage: To be attached between the lens and camera to increase the focal length by 1.5 times. ● 2x Extender (for C mount) Model Number: EX2C Usage: To be attached between the lens and camera to double the focal length.

• lens
• Surveillance Cameras
• Other FA equipment

*The following text is an excerpt from the "FA Dedicated Catalog." For details, please refer to the "FA Dedicated Catalog."* 1. Calculation method for determining focal length (W.D) When determining the distance from the lens tip to the subject (= W.D), it is possible to apply the sensor size of the camera being used, the focal length, and the dimensions of the subject into a formula for calculation. (Some parts omitted) 2. Calculation method for determining focal length If the dimensions of the camera and subject, as well as the distance between the lens and the subject (= W.D), are known, it is possible to derive the theoretical optimal focal length using a formula. (Some parts omitted) 3. Sensor size ● Lens selection It is necessary to select a lens that is compatible with the camera's sensor size. → A lens marked with "Compatible Sensor Size: 1/2 type" can also be used with a camera that has a smaller 1/3 type sensor. However, it is not suitable for a camera with a larger 2/3 type sensor. (Some parts omitted) 4. Optical specifications* (A table is included in the catalog) *The products listed in the FA Dedicated Catalog are from our group company, CBC Corporation, but we also accept inquiries and consultations. Please feel free to contact us.

• lens
• Surveillance Cameras
• Other FA equipment

● Ultra-low distortion specification (optical distortion below 0.1%) ● High peripheral illumination ratio ● Floating mechanism adopted ● Consideration for seismic resistance, with fixed screws used for focus and iris

• lens
• Other FA equipment
• Surveillance Cameras

The "9th Advanced Surface Technology Exhibition and Conference 2014," held from January 29 (Wednesday) to 31 (Friday), has successfully concluded with great success, thanks to everyone! We sincerely thank all those who visited our booth! Finally! The exhibition materials are now available on Ipros! For those who could not attend the exhibition, or those who attended but did not receive the materials, this is a must-see! We also welcome any questions, consultations, or requests for estimates regarding the materials, so please feel free to contact us at the phone/FAX number or email address below! [CBC Optex] TEL: 03-3764-2271 FAX: 03-3764-2267 E-mail: info@cbcopt.co.jp 143-006 9th Floor, Asahi Beer Heiwajima Building, 6-1 Heiwajima 5-chome, Ota-ku, Tokyo

• Laser Components

Our company, CBC Optics, will be exhibiting at ASTEC2014, the 9th Advanced Surface Technology Exhibition and Conference, which will be held from January 29 (Wednesday) to January 31 (Friday), 2014! (For details, please refer to the URL below) 【ASTEC2014 TOP page】 　　http://www.astecexpo.jp/ 【Our company website exhibition information page】 　　http://www.cbcopt.co.jp/topics/cat35/astec2014.html We sincerely look forward to your visit!

• lens
• prism
• mirror

At the end of this month, on October 31st (Thursday), it has finally been decided to introduce the 'ZYGO Mini (interferometer) surface measurement system'! (Details about the system will be posted after its introduction.) With the introduction of this system, we will be able to guarantee the surface accuracy of our products! If you have any products or prototypes for which you require surface accuracy guarantees, please do not hesitate to contact us!

• lens
• prism
• mirror

The "3rd External Line Fair 2013," held from November 26 (Tuesday) to 28 (Thursday), has successfully concluded thanks to your support! We sincerely thank everyone who visited our booth! We are currently introducing the exhibition materials on Ipros and our company website! If you couldn't attend the exhibition or if you attended but didn't receive the materials, this is a must-see! ↓ Download here ↓ <Material 1> https://www.ipros.jp/catalog/detail/286580?secure <Material 2> https://www.ipros.jp/catalog/detail/286581?secure 【Announcement】 We plan to exhibit at "ASTEC 2014," the 9th Advanced Surface Technology Exhibition and Conference (in Tokyo Big Sight) from January 29 (Wednesday) to 31 (Friday)! For details, please visit the URL below: http://www.astecexpo.jp/index.html

• lens
• prism
• mirror