アサダ List of Products and Services

To prevent the release of refrigerant gas into the atmosphere, a ball valve is installed on the main unit in addition to the quick coupler (with shut-off valve) at the tip of the charging hose, to prevent any accidental release of refrigerant into the atmosphere.

• Gas recovery/treatment equipment

● Fully automatic operation with easy setup Fully automatic operation from recovery and regeneration → vacuuming → oil filling → refrigerant filling with simple settings (refrigerant charging amount/vacuum time/oil filling amount). *Vacuuming is only available with C60G (with vacuum pump). ● Equipped with two special filters Removes impurities from refrigerant during recovery and regenerates high purity, enhancing the cooling capacity of car air conditioning. ● Equipped with a two-stage high vacuum pump (except C60GS) R134a tends to absorb moisture, so vacuuming the car air conditioning with a vacuum pump removes moisture in a short time. ● Each mode can operate independently Independent operation is possible for recovery, vacuuming (only C60G), additional refrigerant filling, and oil filling. ● Equipped with a heat exchange type oil separator Separates refrigerant and oil. ● Oil-less type ● Built-in 6L cylinder for ample capacity ● Conventional refrigerant service cans and oil cans can be used as is.

• Gas recovery/treatment equipment

■ Equipped with a 4-compressor ● The newly developed horizontally opposed 4-compressor significantly increases the speed of liquid and gas recovery. ● The horizontally opposed pistons eliminate compression failures due to wear, maintaining maximum capacity. ● The highest recovery speed for 100V machines. ■ High durability & long lifespan ● The high-speed turbine fan powerfully cools the compressor head and condenser, achieving high efficiency and durability. ● Prevents damage to bearings and other components by ensuring no refrigerant enters the crankcase. ● Capable of recovering refrigerant without oil. ■ Compact & lightweight ● Weighs only 20kg, making it easy to carry by one person. ■ Easy to handle ● High-speed gas recovery without the need for valve throttling adjustments. ● No need for equalization between the high-pressure and low-pressure sides at startup. ■ Outstanding recovery capability ● Easily recovers from large refrigeration and air conditioning equipment with a high refrigerant charge. ■ Self-cleaning function ● Collects any residual liquid refrigerant in the recovery device back into the cylinder, preventing the mixing of different refrigerants. ■ Capable of vacuuming ■ Oil-free type ■ Gas/liquid/push-pull ■ Compatible with limit scales

• Gas recovery/treatment equipment

No need for digital cameras or video equipment at all. You can immediately show on-site images. Micro clear camera head. ● No need for digital cameras or video equipment Built-in recording, still image, and playback functions mean you don't need a digital camera, video equipment, AV cables, or cords, making it easy to move on-site. Simple recording, still image capture, and playback with just one button. Connecting an SD card to a PC is convenient for creating reports. ● You can immediately show on-site footage. After work, you can quickly explain the condition of the drainage pipes and the cleaning effects to the customer. (Videos can be easily played back) The clear scope main unit and cable are easy to detach. Micro clear head With a head diameter of 5.5mm and a 1m cable, it is ideal for checking air conditioning drains, fins, and plumbing maintenance.

• Industrial Endoscope

Next-generation camera endoscope that allows easy recording, still images, and playback of drain pipe conditions with the push of a button 2522 ● No need for digital cameras or video equipment; built-in recording, still image, and playback functions eliminate the need for digital cameras, videos, AV cables, and cords, making it easy to move on-site. - Simple recording, still image capture, and playback with just one button. - The included SD card (2GB) can store 30,000 still images and 200 minutes of video data. - Connecting the SD card to a PC is convenient for creating reports. ● You can immediately show on-site footage. After work, you can quickly explain the condition of the drain pipe and the cleaning effect to customers (video playback is easy). - The endoscope body weighs 400g, making it easy to hold with one hand. - The connection and disconnection of the endoscope body and cable are simple. ● Rotating cable drum - The rotating drum makes it easy to insert and remove the cable. - Inserting into the drain pipe and storing in the drum is easy. ● Ultra-compact camera head - With a head diameter of 25mm and a flexible cable, it easily passes through 40A pipes and elbows. - Eight white LEDs brightly illuminate dark pipes. - The camera head is made of stainless steel, making it resistant to scratches and durable.

• Industrial Endoscope

● Lightweight and compact, making it convenient for transport to the job site. ● Stable arc characteristics enabled by DC inverter control allow for high-quality welding. ● Adjustable pulse current, upslope, and downslope. (200GTS・300GTS)

• Welding Machine

A compact test pump that weighs only 3.3 kg, making it easy to carry. It is a pressure and leak testing pump for piping. While conventional models required manual operation for both "water delivery" and "pressurization," the product being introduced allows for "water delivery" with a rechargeable driver and "pressurization" to be done manually. ● High-speed water delivery with a rechargeable driver! ● Water delivery time of 75 seconds when using the rechargeable driver (for a 45m length of 10A cross-linked polyethylene pipe) ● Water delivery with a rechargeable driver / pressurization with a manual lever ● Large capacity tank of 10.5L ● Easy-to-read large 75mm pressure gauge ● Continuous use is possible with the equipped air release valve ● High-pressure rubber hose with a working pressure of 22.5MPa

• Other environmental equipment

Next-generation camera endoscope 203 that allows easy recording, still images, and playback of drain pipe conditions with the push of a button. ● Eight white LEDs brightly illuminate even dark pipes. ● The camera head is made of stainless steel, making it resistant to scratches and durable. ● With a flexible cable of 20mm in diameter and 3m in length, it easily passes through 40A pipes and elbows.

• Industrial Endoscope

−

• Temperature and humidity measuring instruments

We offer a comprehensive catalog of machinery tools for processing pipe materials and steel materials, such as thread cutting machines, cutting machines, welding machines, and cleaning machines, as well as environmental equipment for refrigerant recovery. 【Featured Products】 ■ Steel Pipe Piping Equipment 　● Water and gas pipe thread cutting machines, bolt thread cutting machines 　● Band saws, saw blades 　● Manual and electric test pumps 　● Pliers, wrenches, vises, plastic pipe cutters, flexible pipe cutters, cable strippers ■ Copper Piping Tools 　● Angle processing machines 　● Copper pipe tools (tube cutters, bending machines, burners, solder) ■ Plant Piping Equipment 　● Plasma cutting machines, compressors 　● Arc welding machines, TIG welding machines ■ Cleaning and Maintenance Equipment 　● Pipe inspection cameras, industrial endoscopes (scopes) 　● Drain cleaning equipment (pressurized, manual, electric clog removers, high-pressure washers) 　● Refrigerant and greenhouse gas recovery, regeneration, and decomposition devices 　● Refrigerant recovery and regeneration devices, refrigerant cleaners ■ Air Conditioning Service Equipment 　● Vacuum pumps, vacuum gauges 　● Manifolds (for refrigerants / for ammonia) ■ Air Conditioning Measurement and Leak Detection Equipment 　● Leak detectors 　● Thermometers, hygrometers, anemometers 　● Refrigerant analysis, acid content testing ■ Lifts 　● Hydraulic / pneumatic lifts

• Plastic processing machines (cutting and rolling)
• Welding Machine
• Other cleaning machines

● Lightweight and compact, making it convenient to carry to the job site. ● With DC inverter control, it enables high-quality welding with stable arc characteristics. ● The electric shock prevention feature allows for safe and optimal arc starting.

• Welding Machine

A drainage pipe cleaning machine that can be used not only for standard piping but also for factory piping and boiler piping. Electric drain cleaner R-550, a versatile model that can be used for various applications! ● Features a working range of up to 40 meters and a compact design that excels in portability.

• Other environmental equipment

It is capable of cutting newly installed pipes with a maximum diameter of 220mm, making it ideal for plumbing in construction sites and factories. ● The standard pipe support allows for easy setup of large-diameter and long pipes. ● Easy and simple operation. ● The pipe cutting surface is at a right angle. ● Adopting a chip saw that produces minimal sparks and dust, leaving no burns or burrs on the cutting surface, enabling safe pipe cutting. ● There is no need to move heavy pipes; you can simply clamp the pipe and push to cut easily. ● The sturdy pipe clamp supports the pipe, minimizing blade vibration, allowing for cutting any pipe at a right angle, making it ready for welding. ● Its ultra-compact and lightweight design is perfect for dimensioning large-diameter pipes on-site. ● It can cut in narrow spaces. ● Cutting small-diameter pipes can be easily done on a workbench, and changing the saw blade is simple.

• Plastic processing machines (cutting and rolling)

● Improved work efficiency with exceptional cutting speed. ● Enhanced right-angle cutting performance with the adoption of a new load adjustment mechanism. ● Lightweight and portable, ideal for on-site work. ● Safe and environmentally friendly with no sparks, odors, or cutting dust. ● Equipped with an overload protection device to prevent motor burnout.

• Plastic processing machines (cutting and rolling)

For removing clogs in toilets, bathrooms, and sinks. ● Ideal for clogs in Japanese and Western toilets (long adapter), sinks, and washbasins (short adapter). ● Quickly resolves clogs with powerful water pressure. ● Can also suction, accommodating various types of clogs. ● Clean operation without touching the clogged water. ● Ultra-lightweight and easy to carry.

• Other environmental equipment

Asada High-Pressure Washer 8.5/60 Electric 100V Cold Water Pump ● Equipped with a cleaning tank ● Cleaning and pipe cleaning capability ● High-performance three-piston pump with durability ● Equipped with an air release valve for excellent self-priming capability ● Adjustable nozzle for switching between high and low pressure and adjusting the spray angle

• Other cleaning machines

● Compact yet powerful cleaning ability. ● Quiet operation, making it safe for use in residential areas. ● 100V specification allows for easy power access in ordinary households, ensuring smooth operation.

• Other cleaning machines

● Soundproof panels shut out engine noise. ● Lightweight and compact at only 45kg with low noise. ● Equipped with an automatic air release valve for high suction capability. ● Recoil start. ● Easy connection with SUS one-touch coupler.

• Other cleaning machines

High-speed threading machine for mass production and continuous threading operations up to 2 inches. ● Significantly reduces processing time with an auto chuck and a powerful 1700W high-speed motor. ● Ensures secure grip on pipes with double auto chuck jaws at the front and rear of the spindle. ● Designed specifically for steel pipes (not suitable for outer lining pipes).

• Plastic processing machines (cutting and rolling)

● A 90° bend of a rigid copper pipe 11/8" (28.58mm) can be completed in 8 seconds. ● The gear automatically releases at the set angle, resulting in a perfect bend finish at the desired angle.

• Other work tools

● A genuine 3" machine that excels in durability and precision, pursuing a threading design that minimizes leaks. Equipped with a powerful 1140W motor, it allows for effortless cutting even at low voltage. ● Uses maintenance-free ball bearings for the main spindle, preventing any play in the spindle. ● High-capacity oil pump ensures sufficient oil supply even at low rotational speeds, providing stable threading. ● Features an easy-to-grip hammer chuck for strong clamping power. ● The cutter and reamer blades developed for the Beaver series are optimized in tip shape to enhance cutting performance and durability.

• Plastic processing machines (cutting and rolling)

A 2" machine that excels in durability and pursues precision with minimal leakage in threading. ● Equipped with a high-output 750W motor, allowing for ample cutting even at low voltage. ● High-precision ball bearings are used for the main spindle bearing, ensuring no play in the spindle even after long-term use, enabling precise cutting. ● A high-capacity oil pump is adopted to ensure sufficient oil supply even at low rotational speeds, allowing for precise cutting. ● An easy-to-grip hammer chuck provides strong clamping force. ● The cutter and reamer blades developed for the Beaver series optimize the cutting edge shape, enhancing sharpness and durability.

• Plastic processing machines (cutting and rolling)

■Twin Compressor ● Equipped with a newly developed horizontally opposed twin compressor, significantly increasing the speed of liquid and gas recovery. ■ High Durability & Long Lifespan ● The horizontally opposed piston eliminates compression failures due to wear, maintaining maximum capacity. ● The high-speed turbine fan powerfully cools the compressor head and condenser, achieving high efficiency and durability. ● Prevents damage to bearings and other components as refrigerant does not enter the trunk case. ● Capable of recovering refrigerant without oil. ■ Lightweight & Compact ● Compact size with a weight of 13.5 kg makes it easy to move on-site. ■ Easy to Handle ● High-speed gas recovery without valve throttling adjustments. ● No need for equalization between the high-pressure and low-pressure sides at startup. ■ Outstanding Recovery Capability ● Demonstrates power in summer and during R410A recovery. ■ Built-in Strainer ● The built-in stainless steel mesh filter protects the recovery device circuit from dirty refrigerants. ■ Self-Cleaning Function ● Collects any remaining liquid refrigerant in the recovery device back into the cylinder, preventing mixing of different refrigerants. ■ Capable of Vacuum Pulling ■ Oil-less Type ■ Gas/Liquid/Push-Pull ■ Limit Scale Compatible

• Gas recovery/treatment equipment

● No need to purchase or stock sockets. ● 50% reduction in time and labor costs. ● 50% reduction in filler material and brazing work time. ● Transforms scrap copper pipes destined for the trash into usable fittings.

• Other work tools

An ultra-lightweight and compact electric threading machine that can be easily transported to any job site, weighing only 7.2 kg. ● Ideal for threading work in tight spaces, such as installation and repair of existing pipes. ● Lightweight and compact, making it easy to carry to any job site. ● Designed specifically for steel pipes (not suitable for lined pipes).

• Plastic processing machines (cutting and rolling)

● Industry-first vacuum gauge with built-in monitoring capability. ● Built-in check valve prevents backflow of oil from the vacuum pump. ● Equipped with 1/4”, (3/8”), and 1/2” suction ports, significantly reducing evacuation time. ● Adoption of a 2-stage rotary pump achieves high vacuum of 15 microns. ● Powerful high-torque motor ensures smooth startup even in winter. ● Large oil capacity prevents temperature rise during operation and helps reduce contamination. ● A powerful model that quickly reaches a vacuum of 15 microns or more, sufficient to eliminate contamination that can cause system failures.

• Other pumps