ニッシン産業 List of Products and Services

We would like to introduce the electrical tester + insulated hand tool starter kit, 'Fluke T6-1000,' which we handle. By using this product equipped with FieldSense technology, you can quickly and easily measure voltage levels by simply inserting the fork opening around the conductor. No test leads are required. The 'T6' comes with an insulated hand tool starter kit. 【Features】 ■ Measures voltages up to 1000V AC with an open-head fork ■ No need to open covers or remove wire nuts ■ Simultaneously measures voltage and current ■ The open-head fork width is 17.8mm, the largest in the industry, capable of measuring up to 200A with 4/0 (120mm2) wire ■ Can measure actual AC voltage/current values without using test leads *For more details, please refer to the PDF document or feel free to contact us.

• Voltage Meter
• Ammeter

We would like to introduce the "High Durability Temperature Sensor" manufactured by Ando Instrumentation, which we handle. This sensor has sufficient durability for measuring high-temperature surfaces, and pipe lengths are available in 100, 200, 300, 500, and 1000 mm. The lineup includes three types: straight, 90°, and 45°. It is suitable for measuring the surface temperature of carbon molds and the surface temperature of metals inside furnaces, making it ideal for relatively high-temperature metal surface measurements. 【Specifications (partial)】 ■ Thermocouple type: Type K ■ Operating temperature range: -50 to 1200℃ ■ Response time: 15 seconds ■ Durability: B (over 10,000 times) ■ Pipe material: Stainless steel (SUS316) ■ Grip material: Polyacetal *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

We handle the "Submersible Temperature Sensor" manufactured by Anritsu, which can be used for measuring the temperature distribution of seawater and the temperature of wells. This sensor is suitable for temperature measurement in deep water, with a head mass of approximately 100g and a maximum cable length of 20m. Customers who require a cable length exceeding 20m are encouraged to consult us separately. 【Specifications】 ■ Thermocouple type: Type E or K ■ Operating temperature range: -50 to -150℃ ■ Tolerance (for temperatures between 0℃ and 150℃): ±2.5℃ ■ Response time: 3 seconds ■ Durability: S (no evaluation due to special structure) ■ General (manufacturer) calibration temperature range: 0 to 100℃ ■ Repair: Non-repairable item *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

We handle the "Piercing Protection Tube Type Temperature Sensor" manufactured by Ando Instrumentation. This sensor is suitable for measuring the temperature of semi-solid materials, with a variable protection tube that allows for adjustable insertion lengths (ranging from 5mm to 15mm). It can be used for measuring the temperature of resin injected from the nozzle of molding machines, as well as for measuring the internal temperature of frozen foods and tires. 【Specifications (partial)】 ■ Thermocouple type: Type E or K ■ Operating temperature range: -200 to 300℃ ■ Tolerance (for temperatures between 0℃ and 300℃): ±2.5℃ ■ Response time: 1.5 seconds ■ Durability: B (more than 1 year) ■ Grip material: Black phenolic resin *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

We handle the "Temperature Sensor for Molten Metal Surfaces" manufactured by Anritsu, which can be used for measuring the solder surface temperature of solder baths. It measures the surface of molten metal regardless of the immersion length with two thermocouples. The design allows for continued use even if the immersed part corrodes and shortens. We offer two types: "518" with a measurement section thickness of φ1.6mm and "524" with a thickness of φ2.3mm. 【Specifications (partial)】 ■ Thermocouple type: Type E or K ■ Operating temperature range: 0 to 700℃ ■ Response time: 2 seconds ■ Durability: S (no evaluation due to special structure) ■ Calibration temperature range (general manufacturer): 0 to 500℃ ■ Repair: Non-repairable items *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

We handle the "Tape Type Temperature Sensors" manufactured by Ando Instrumentation. We offer three types: the low-temperature type "503," the high-temperature type "505," and the skin surface type "540." These sensors are suitable for temperature measurement by attachment and can be used for measuring surface temperatures of both metal and non-metal materials. 【Specifications (partial)】 ■ Thermocouple type: Type E or K ■ Operating temperature range - 503: -50 to 210℃, 505: -50 to 400℃, 540: -50 to 100℃ ■ Response time - 503: 3 seconds, 505: 6 seconds, 540: 8 seconds ■ Durability: S (not evaluated due to special structure) *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

The "TDC-1006 series" is a compact dust collector that can capture fine dust generated in various work processes in clean environments. It uses a high vacuum type vacuum motor, allowing it to suction through narrow and long piping with high pressure loss. Additionally, the airflow can be adjusted continuously using the airflow adjustment dial. 【Features】 ■ Capable of collecting fine dust generated in various work processes in clean environments ■ Uses a high vacuum type vacuum motor ■ Can suction through narrow and long piping with high pressure loss ■ Continuous operation for 8000 hours is possible due to the adoption of a brushless motor ■ Airflow can be adjusted continuously using the airflow adjustment dial ■ Since it uses a brushless motor, the exhaust does not contain carbon fine dust *For more details, please refer to the PDF document or feel free to contact us.

• Dust collector
• Other environmental equipment
• Industrial Vacuum Cleaners

The "TVC-1500K" is a high-power cleaner designed for continuous operation, combining the functions of a vacuum cleaner and a dust collector. It can continuously collect dust, scraps, and chips generated in factories, contributing to a cleaner work environment and vacuum transport from production lines over extended periods. Additionally, with a rich lineup, it allows for the selection of necessary airflow and vacuum levels according to the application, and soundproofing measures are implemented in the motor box and exhaust process. 【Features】 ■ Rich lineup: Allows for the selection of necessary airflow and vacuum levels according to the application ■ Collection hoses can be selected from Φ38, Φ50, or Φ75 depending on the situation ■ Soundproofing measures are implemented in the motor box and exhaust process ■ Optional HEPA filters can be installed for cleanroom-compatible specifications ■ Dimensions: 500W × 650D × 1120H *For more details, please refer to the PDF document or feel free to contact us.

• Dust collector
• Other environmental equipment
• Industrial Vacuum Cleaners

One of the means to resolve troubles that occur during transportation is the measurement of the transportation environment. If product damage occurs during transportation, being able to understand the extent of environmental stress that occurred during the transport process and what caused the damage will make it easier to implement various measures such as improving the strength of the product itself, reconsidering packaging design, and reducing transportation stress. By using the transportation environment recorder "DER-1000," you can measure these transportation environments. 【Features of DER-1000】 ■ Vibration and shock measurement using a 3-axis acceleration pickup ■ Equipped with temperature and humidity sensors ■ Continuous measurement for up to 70 days (when using lithium batteries) ■ Maximum memory capacity of 1GB (data count: 160,000) ■ Compact size: 121×109×58mm * For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Recorders
• Other electronic measuring instruments

The "BT Series" is a penetrating type temperature sensor suitable for measuring semi-solid substances. It is possible to combine items according to the application, such as the thickness of the needle and the needle exchange type. There are two types of tip shapes available: "diagonal cut (injection needle cut)" that opens the measurement target during needle insertion, and "conical cut" that pushes open the measurement target during needle insertion. 【BT-1 Specifications (partial)】 ■ Thermocouple type: Type E or K ■ Operating temperature range: -200 to 210℃ ■ Response time: 0.5 seconds ■ Durability: C (more than six months) *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

The "BS Series" is an internal temperature sensor suitable for measuring liquids and semi-solid substances. It is possible to combine items such as the outer diameter and length of the protective tube and the presence or absence of coating according to the application. The appearance shape is "sleeve type" when the outer diameter of the protective tube is 1.5mm or less, and "grip type" when it is 2.1mm or more. 【BS-91 Specifications (Partial)】 ■ Thermocouple type: Type E or K ■ Operating temperature range: -200 to 300℃ ■ Response time: 0.5 seconds ■ Durability: C (more than six months) *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

The "BR Series" is a low-temperature temperature sensor that can measure from stainless steel pipes to the parallel flat wire section within a temperature range of -100 to 200°C. It is suitable for temperature management inside freezers, refrigerators, constant temperature baths, incubators, and drying ovens, as well as for comparative checks of installed thermometers. Additionally, items can be combined according to application needs. 【Features】 ■ Can measure from stainless steel pipes to the parallel flat wire section within a temperature range of -100 to 200°C ■ Can be clamped in a door with a thickness of 0.2mm ■ Suitable for measuring internal temperatures and ambient temperatures ■ Items can be combined according to application needs *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

The "AT Series" is a temperature sensor specifically designed for air temperature with a reduced thermal mass. It has a temperature range of -50 to 200°C, and the sensor shapes include the Teflon-coated wire "AT-10," as well as "AT-20," "AT-30," and "AT-40" in the lineup. You can combine items according to your application. 【Product Lineup】 ■AT-10 ■AT-20 ■AT-30 ■AT-40 *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

We would like to introduce our gap insertion type temperature sensor, the "504 Series." It is suitable for measuring the temperature between layers of materials such as plywood and paper during press machine operations. The operating temperature range is a high-temperature type, from -50 to 500°C. Additionally, we also offer a low-temperature type, the "502 Series," with an operating temperature range of -50 to 210°C. 【Specifications (partial)】 ■ Thermocouple type: Type E or K ■ Operating temperature range: -50 to 500°C ■ Response time: 6 seconds *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

The "502 Series" is a gap insertion type temperature sensor with a temperature range of -50 to 210°C. It is suitable for measuring interlayer temperatures in materials such as plywood and paper, and can be used for temperature measurement during press operations and for measuring interlayer temperatures of paper after drying. Additionally, a high-temperature type "504 Series" with a temperature range of -50 to 500°C is also available. 【Specifications (partial)】 ■ Thermocouple type: Type E or K ■ Operating temperature range: -50 to 210°C ■ Response time: 3 seconds *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

The "343 Series" is a miniature surface temperature sensor (plug-in type) designed to easily penetrate into electrical equipment. It has a pipe shape with a 30° type, and can measure on both metal and non-metal surfaces. Applications include measuring temperature distribution in IC packages and surface temperature measurement on printed circuit boards. 【Features】 ■ Designed for easy penetration into electrical equipment ■ Capable of measuring on both metal and non-metal surfaces ■ Available in straight and 30° types ■ Usable for measuring temperature distribution in IC packages, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors
• Thermometer

The "310 Series" is a plug-type temperature sensor for micro surfaces with a straight pipe shape. It is designed to easily penetrate into electrical devices and can measure both metal and non-metal surfaces. Additionally, we also offer the "343 Series," which has a 30° pipe shape. 【Features】 ■ Designed for easy penetration into electrical devices ■ Capable of measuring both metal and non-metal surfaces ■ Available in straight and 30° types ■ Usable for measuring temperature distribution in IC packages, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

The "213/214/215/216/217 series" is a high-temperature moving surface temperature sensor that can be used for measuring the surface temperature of steel plates immediately after they exit the furnace. The guard is made of mica-based heat-resistant material that can withstand high temperatures, and there are five pipe lengths available: 100, 200, 300, 500, and 1000 mm. Additionally, the model name and suggested retail price vary depending on the length of the stainless steel pipe. 【Features】 ■ Suitable for measuring high-temperature moving surface temperatures ■ Guard made of mica-based heat-resistant material ■ Five pipe lengths available: 100, 200, 300, 500, and 1000 mm ■ Can be used for measuring the surface temperature of steel plates immediately after they exit the furnace *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

This product achieves high-performance measurement of moving surface temperatures, which is challenging for contact-type temperature sensors, while also featuring durability. By fixing one side of the contact plate with an axis, it reduces deformation of the contact plate caused by unexpected small attachments or distortions on the surface of the measured object. It is suitable for measuring the temperature of high-temperature metal surfaces during processes such as rolling. 【Features】 ■ Adopts a 4-point support structure ■ Includes a test report ■ Remarkably durable ■ Fast response speed *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

This product is a self-weight sensor that measures using its own weight. It employs a four-point support structure at the contact area of the temperature sensor. The contact plate is shaped like a "C" and is supported at four points without fixing the support points, maintaining a free state to avoid stress. Additionally, by selecting specifications for each item, a single sensor suitable for the customer's application can be created. 【Features】 ■ Four-point support structure ■ Test report included ■ Exceptional durability ■ Fast response speed *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

This product is a high-performance sensor that integrates high responsiveness and high durability. The head shape is an ultra-compact pencil size of 6×7mm (the tip contact area is 6×5mm). It is available for high temperatures (MAX. 800℃) with a ceramic guard and low temperatures (MAX. 300℃) with a liquid crystal polymer guard. 【Features】 ■ Adopts a 4-point support structure ■ Includes a test report ■ Exceptional durability ■ Fast response speed *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

This product is a high-performance temperature sensor for general surface temperature measurement, applicable to both metal and non-metal surfaces. It enables high-level measurements that pursue response speed and durability. There are two head sizes available: Φ15mm and Φ10mm, each equipped with a stainless steel guard capable of measuring high temperatures (MAX. 800℃) and a liquid crystal polymer guard suitable for measuring low temperatures (MAX. 300℃). 【Features】 ■ Adopts a 4-point support structure ■ Includes a test report ■ Remarkably durable ■ Fast response speed *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Thermometer

We would like to introduce our surface/internal temperature calibration system 'ACSII-4000' that we handle. It is a multi-faceted type that can calibrate surface temperatures up to 500°C and internal temperatures with a resolution of 0.01. By incorporating various proprietary technologies, we can achieve a high-level traceability environment. 【Specifications】 ■ Surface temperature calibration: Room temperature to 500°C ■ Internal temperature calibration: Room temperature to 500°C ■ External dimensions (W) × (H) × (D) mm ・Control unit: 430×177×350 ・Calibration block: 450×405×400 ■ Weight (kg) ・Control unit: 5 ・Calibration block: 70 *For more details, please refer to the PDF document or feel free to contact us.

• Thermometer

We would like to introduce our internal temperature calibration system, the 'ACSII-3000'. It overcomes traditional issues and allows for internal temperature calibration from room temperature to 500°C. The mass is 5 kg for the control unit and 70 kg for the calibration block. 【Specifications】 ■ Internal temperature calibration: Room temperature to 500°C ■ External dimensions (W) × (H) × (D) mm ・ Control unit: 430 × 177 × 350 ・ Calibration block: 405 × 405 × 400 ■ Mass (kg) ・ Control unit: 5 ・ Calibration block: 70 *For more details, please refer to the PDF document or feel free to contact us.

• Thermometer

We would like to introduce our high-temperature surface temperature calibration system, 'ACSII-2000'. Since there was no established reference point for surface temperature, we developed the "ACSII series" with the aim of determining a surface temperature standard. This product achieves surface temperature calibration up to 500°C with a calibration block using our unique technology. 【Specifications】 ■ Surface temperature calibration: Room temperature to 500°C ■ External dimensions (W) × (H) × (D) mm ・ Control unit: 320×177×350 ・ Calibration block: 390×221×360 ■ Weight (kg) ・ Control unit: 4.5 ・ Calibration block: 20 *For more details, please refer to the PDF document or feel free to contact us.

• Thermometer

The "ACSII-1000" is a surface temperature calibration system that can perform high-precision calibration up to a surface temperature of 300°C. By incorporating various proprietary technologies, it achieves a high-dimensional traceability environment. Additionally, we offer a high-temperature surface temperature calibration system "ACSII-2000" and an internal temperature calibration system "ACSII-3000" among our lineup. 【Specifications】 ■ Surface temperature calibration: Room temperature to 300°C ■ External dimensions (W) × (H) × (D) mm ・ Control unit: 320×177×350 ・ Calibration block: 260×130×260 ■ Weight (kg) ・ Control unit: 4.5 ・ Calibration block: 7 *For more details, please refer to the PDF document or feel free to contact us.

• Thermometer

The "VSD4 Series" is a transmitter that calculates the output from two pressure sensors to detect differential pressure. It features a safe and secure structure that does not use filling liquid, with an output of 4-20mA (2-wire) and a scaling function. Additionally, you can choose between 1 output (differential pressure output only) and 2 outputs (differential pressure output + low pressure side output). 【Features】 ■ Calculates the output from two pressure sensors to detect differential pressure ■ Output of 4-20mA (2-wire) with scaling function ■ Choice of 1 output (differential pressure output only) or 2 outputs (differential pressure output + low pressure side output) ■ High-strength pressure receiving surface *For more details, please refer to the PDF materials or feel free to contact us.

• Converters and Transducers

The "VCCP Series" is a built-in amplifier pressure sensor capable of measuring in a vacuum environment. Calibration ranges can be selected from 1500Pa (abs), 5kPa (abs), and 10kPa (abs). The maximum allowable pressure is 400kPa, with the connection screw part made of SUS316L, the sensing part made of alumina ceramic, and the case made of SUS304. 【Measurement Overview】 ■ Measurement media: Fluids that do not corrode ceramic + SUS316L + O-ring, such as water, oil, and gas ■ Measurement type: Capable of measuring absolute pressure ■ Measurement range: Calibration ranges can be selected from 1500Pa (abs), 5kPa (abs), and 10kPa (abs) ■ Output type: Can be specified as 4–20mA (4-wire) or 1–5V *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "VLC-200KNJ544" is a high-capacity load button type load cell. It has a rated displacement of approximately 0.05mm and a weight of about 3.6kg (including cable). Additionally, the material is SUS630 (only for the main body), and it comes with a standard 5m robot cable. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Rated output: 1.995–2.005mV/V ■ Non-linearity: ±0.1% R.C. ■ Hysteresis: ±0.1% R.C. ■ Repeatability: ±0.05% R.C. ■ Zero balance: -0.060–0.060mV/V ■ Zero point temperature effect: ±0.05% R.C./10℃ *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "VLC-218 series" is a load button type load cell with a rated output of 2mV/V ± 0.1mV/V. The protection structure is equivalent to IP64 (only for the main body). (The sealing performance of the cable outlet may decrease due to aging of the cable sheath.) It comes with a standard 5m robot cable and offers high precision. Additionally, both the temperature compensation range and allowable temperature range are from -10 to 60°C. 【Lineup】 ■VLC-50KN-218 ■VLC-100KN-218 ■VLC-200KN-218 *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

We would like to introduce our load cell, the "VLC-H400 series." This product is a vibration-resistant load button type, with a standard robot cable length of 5m. The material is SUS630 (only for the main body), and the allowable temperature range is -15 to 75°C. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Rated output: 2mV/V ±0.5% ■ Non-linearity: ±0.1% R.C. ■ Hysteresis: ±0.1% R.C. ■ Repeatability: ±0.05% R.C. ■ Zero balance: ±3% R.O. ■ Zero point temperature effect: ±0.05% R.C. / 10°C *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "VPW4MC3 series" is a thin single-point type load cell. The temperature influence on output is ±0.0175% R.C. / 10°C from 20 to 40°C, and ±0.0117% R.C. / 10°C from -10 to 20°C. It has excellent environmental resistance and low capacity with high precision. The material is aluminum alloy (only for the main body). 【Lineup】 ■VPW4MC3-0.3kg ■VPW4MC3-0.5kg ■VPW4MC3-2kg ■VPW4MC3-3kg ■VPW4MC3-5kg *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

We would like to introduce the 'VLC-E333M1H series' that we handle. This product is capable of withstanding high temperatures of 150°C. It is a compact load cell with a load button type. The rated output is 1.200 to 1.800 mV/V, and the input resistance is 343.0 to 357.0 Ω. 【Lineup】 ■VLC-500NE333M1H ■VLC-1KNE333M1H ■VLC-2KNE333M1H ■VLC-3KNE333M1H ■VLC-5KNE333M1H ■VLC-10KNE333M1H ■VLC-20KNE333M1H *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

We would like to introduce our load button type load cell, the 'VLC-E344 series.' It comes with a standard 5m robot cable and is well-suited for measuring load changes in pressing and insertion applications. Additionally, the maximum applied voltage is 15V, and the insulation resistance is over 1000MΩ (DC 50V). 【Lineup】 ■VLC-500NE344 ■VLC-1KNE344 ■VLC-2KNE344 ■VLC-5KNE344 ■VLC-10KNE344 ■VLC-20KNE344 *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "VMS Series" can manufacture custom-made pressure transmitters (pressure sensors with built-in amplifiers) in lots. You can select specifications that suit your application from a wide range of ranges, accuracy, and output signals. It eliminates waste and offers high cost performance tailored to the desired specifications. 【Features】 ■ High precision total error band (TEB) ■ Wide pressure range and operating temperature range ■ Robust integrated structure of the sensor (Material: 17-4PH) ■ Compliant with CE and RoHS2 ■ IP65 to IP67 compliant *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors

We handle pressure sensors certified for "Intrinsic Safety Explosion Protection." The ignition degree and explosion grade for the target gas or vapor is II CT3. Recommended barriers include "MTL7787+" and "MTL5541," as well as "MTL5541 + MTL661." Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Type of explosion-proof structure: Intrinsic safety explosion-proof structure (ia) ■ Ignition degree and explosion grade for target gas or vapor: II CT3 ■ Ratings - Circuit: Allowable voltage 28V, allowable current 93mA, allowable power 0.65W - Internal inductance: 0.021mH - Internal capacitance: 0.061μF *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "VPRF2 Series" is a pressure sensor for medium to high pressure applications designed for high temperature (max. 150°C). The wetted part features a robust and long-lasting diaphragm-integrated structure made through machining. The wetted part is a flush type (without an inlet), making it less prone to clogging, which is ideal for measuring viscous media. 【Features】 ■ Less prone to clogging ■ Suitable for measuring viscous media ■ High temperature type (max. 150°C) ■ Wetted part has a diaphragm-integrated structure made through machining *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

We would like to introduce our mid to high pressure pressure sensor, the 'VPRF Series'. The liquid contact part is a flush type (without an inlet), making it less prone to clogging, which is ideal for measuring viscous media. The liquid contact part features a diaphragm-integrated structure that does not use any filling liquid, ensuring durability, reliability, and a long lifespan. 【Features】 ■ Flush type liquid contact part (without an inlet) ■ Diaphragm-integrated structure that does not use any filling liquid ■ Durable, reliable, and long-lasting ■ A wide variety of analog output types available (4-20mA [2-wire, 4-wire], 1-5V, 0-5V, 0-10V) *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

We would like to introduce our economy-type pressure sensor for medium to high pressure, the 'VPRQ(F) series'. The sensor part features a diaphragm-integrated structure made through machining, making it robust and long-lasting. The pressure inlet is wide at φ9.5, designed to minimize the accumulation of sludge and liquid. 【Features】 ■ Economy type for medium to high pressure ■ Robust and long-lasting ■ Wide pressure inlet at φ9.5 ■ Structure that minimizes liquid accumulation *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "VESV/VESI series" is a compact pressure sensor with a built-in amplifier for medium to high pressure, featuring a response time of 5 msec or less. It is suitable for locations with rapid pressure fluctuations due to the adoption of a diaphragm cover. It has high environmental resistance and achieves short delivery times and low prices. Please feel free to contact us when you need assistance. 【Features】 ■ Wide temperature compensation range ■ Protection structure: Equivalent to IPx7 ■ Vibration resistance: 196 m/s² (50–1000 Hz) ■ Adoption of diaphragm cover *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors

We would like to introduce our clamp-type temperature sensor, the '1811 Series (Clip)'. It can be used for measuring the surface temperature of cylindrical heating furnaces in textile factories and for measuring the surface temperature of steam pipes, among other applications. It is suitable for pipe diameters of φ6 to 25mm, with a temperature range of -50 to 100℃. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Thermocouple type: Type E or K ■ Operating temperature range: -50 to 100℃ ■ Tolerance (for temperatures between 0℃ and 1000℃): ±2.5℃ ■ Response time: 2 seconds *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

We would like to introduce our pipe outer surface type temperature sensor, the '528 Series (Hook).' It is suitable for pipe diameters of φ20 to 50mm, with a temperature range of -50 to 210℃. Additionally, the response time is 3 seconds, and the grip material is black phenolic resin. Please feel free to contact us if you have any inquiries. 【Specifications (Partial)】 ■ Thermocouple type: Type E or K ■ Operating temperature range: -50 to 210℃ ■ Tolerance (for temperatures between 0℃ and 210℃): ±2.5℃ ■ Response time: 3 seconds *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

We would like to introduce our temperature sensor, the '344 Series (Straight)'. This sensor is designed for measuring the inner surface of pipes, with a measurement capability for inner diameters of 8mm or more. The operating temperature range is -50 to 400°C, and it can also be used for fine grooves. Please feel free to contact us if you have any inquiries. 【Features】 ■ Ideal for measuring the temperature of pipe inner walls ■ Capable of measuring inner diameters of 8mm or more ■ Usable for fine grooves as well *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "305 Series (L Shape)" is a temperature sensor designed for the inner surface of pipes. It can measure inner diameters of 8mm or more and can also be used for narrow grooves. It is suitable for applications such as measuring the inner wall temperature of pipe heaters and cylindrical heating devices. 【Features】 ■ Ideal for measuring the inner wall temperature of pipes ■ Capable of measuring inner diameters of 8mm or more ■ Usable for narrow grooves as well *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

We would like to introduce our R-type temperature sensor, the '123 Series'. It is suitable for measuring the surface temperature of pipes and small curved surfaces. The guard can be cut to fit pipe curves ranging from φ9 to φ100mm. 【Features】 ■ Guards available according to the diameter of the pipe being measured ■ Ideal for measuring the surface temperature of pipes and small curved surfaces ■ Repairable *For more details, please refer to the PDF document or feel free to contact us.

• Sensors