フロロコート List of Products and Services

This introduces cases where the heat resistance, cushioning, and rust prevention properties of fluororesin coatings are utilized for adjusting finishing dimensions. In "air conditioning compressors," a coating process of approximately 80μm is performed to prevent galling. In "superchargers," a coating process with a film thickness of over 800μm is implemented to achieve familiarity and prevent galling. 【Practical Examples】 ■ Air Conditioning Compressor - A coating process of approximately 80μm is performed. After coating, machining of the coating film is done, resulting in a coating film without defects inside. ■ Supercharger - A film thickness of over 800μm is achieved. - Material development considering broaching processability is also being conducted. *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the "Automatic Contact Angle Meter" available at our company. It has become possible to measure contact angles during wetting and the sliding angle when water droplets slide off, which could not be measured with conventional contact angle meters. One of the functions of fluoropolymer-coated films is their water-repellent property. The measurement results from such contact angle meters can be used as one of the criteria for selecting coating films. 【Main Measurement Functions Different from Conventional Methods】 1. Aging changes in the droplet method (conventional contact angle measurement method) 2. Sliding method (contact angle measurement method when water droplets slide off) *For more details, please refer to the PDF document or feel free to contact us.

In the fluorocoat, we propose challenges and solutions for the adoption of Mg alloy (magnesium alloy) as a trump card for weight reduction. Mg alloy (magnesium alloy) has issues such as susceptibility to corrosion, galvanic corrosion, and oxidation, but by applying a coating, it can be protected from chemicals, prevent galvanic corrosion as an insulator, and also prevent oxidation. This could significantly reduce the weight of vehicles. We also have case studies and achievements related to spray guns. ■ Advantages of Mg alloy (magnesium alloy) - The lightest among practical metals (specific gravity = aluminum 2/3, iron 1/4) - Higher specific strength than Al and iron - Maximum vibration absorption - Abundant resources (the last super metal on Earth) * For more details, please refer to the PDF materials or feel free to contact us.

Hard A (Ace) is more durable than fluoropolymer coatings and ceramic coatings. We have published data from reciprocal wear tests. *For more details, please refer to the PDF materials or feel free to contact us.

The "Adron(r)" coating of Fluoro Coat supports a safe, secure, and convenient life. 1. Quality Through thorough quality control, we fully utilize the performance of fluororesin. 2. Form We accommodate coatings for small, large, and complex shapes, as well as various forms. 3. Materials We have coating achievements not only for metals but also for rubber, resin, glass, ceramics, stone, and more. *For more details, please refer to the PDF materials or feel free to contact us.

At Florocoat, we support aspects such as initial evaluation and comparison of evaluations after use (post-testing) through our 60 years of experience and well-equipped evaluation facilities (sample evaluation, actual machine evaluation). We also accept prototype requests starting from one unit, including processing consultations and coating selection. 【Support Details】 ■ Initial evaluation & comparison of evaluations after use (post-testing) (sample evaluation, actual machine evaluation) ■ Prototype support starting from one unit (processing consultations, coating selection) *For more details, please refer to the PDF document or feel free to contact us.

What is "Hard A (Ace)"? It is a high wear-resistant coating that dramatically improves wear resistance, adhesion, hardness, and scratch resistance without compromising the heat resistance, non-adhesiveness, and slip properties of fluoropolymer coatings. If you are concerned about the durability of coating films, please give it a try. *For more details, please refer to the PDF materials or feel free to contact us.

The steel belt continuous band oven has adopted the unique Adron coating "Adron L-4283GB" developed by Fluorocoat. By automating the removal of baked goods from the steel belt, we were able to reduce personnel by three, as well as achieve improvements in flavor and other benefits.

Performance (Functions) Provided by Fluororesin Coating "Adron®" ■ Non-adhesiveness (Example: L-RN100 Coating) ■ Water and oil repellency (Example: L-RN300 Coating) ■ Heat resistance (Example: L-RN100 Coating) ■ Slipperiness (Example: L-RS100 Coating) ■ Wear resistance (Example: L-RS100 Coating) ■ Chemical resistance (Example: L-RK200 Coating) ■ Electrical properties (Example: L-RN300 Coating) *For more details, please refer to the PDF document or feel free to contact us.

Coating for belts over 100m long—are you still giving up? With FluoroCoat, our unique control system ensures quality management, achieving a uniform coating even for belts exceeding 100m. If you've tried various manufacturers and been turned away, please consult us about our FluoroCoat. 【Features】 ■ Scratch-resistant coating with special undercoating treatment ■ Durability for over 1000 hours in food production lines ■ Reusable substrate (belt) through film stripping and reprocessing ■ Coating can be selected to meet your specific requirements *For more details, please refer to the PDF document or feel free to contact us.

Fluoropolymer is a thermoplastic polymer composed of fluorine (F), which is abundant in fluorite, and carbon chains. It is widely used in coatings, molded products, films, and construction materials as a material with excellent physical properties. Furthermore, "fluoropolymer coatings" play a significant role in various fields, from household goods to the space industry, in streamlining and automating processes or protecting the global environment. 【Characteristics of Fluoropolymer Coatings】 ■ Non-adhesive ■ Heat resistance ■ Slip properties ■ Chemical resistance ■ Water and oil repellency ■ Abrasion resistance ■ Electrical properties *For more details, please refer to the PDF document or feel free to contact us.

This document is a comparison table of the properties of fluoropolymer coatings. It includes various types of coating materials such as "PTFE-based coatings," "ETFE-based coatings," "ECTFE-based coatings," and "fluororubber-based coatings." Please use this information for the utilization of fluoropolymer coatings. 【Types of Coating Materials】 ■ PTFE-based coatings ■ PFA-based coatings ■ FEP-based coatings ■ ETFE-based coatings ■ ECTFE-based coatings ■ Fluororubber-based coatings ■ Modified coatings *For more details, please refer to the PDF document or feel free to contact us.

Here are some examples of applications for fluoropolymer coatings. Starting with "heat rollers and pressure rollers for copiers and printers," there are also "protective tubes," "chemical tanks," and "plating jigs," among others. We aim to provide coating films that fully utilize the performance of fluoropolymers. Before giving up on fluoropolymer coatings, please consult with us. 【Examples of Applications】 ■ Fixing release claws and release plates for copiers and printers ■ Evaporators ■ Industrial molds ■ CFRP and CC composites ■ Cutting die rolls for rice cracker production ■ Sushi robot parts, etc. *For more details, please refer to the PDF materials or feel free to contact us.

Are you having trouble with sticking and stringing? For two resin parts (made of thermoplastic resins such as polycarbonate and acrylic), heating them to melt and then joining them together in a molten state, a fluororesin coating on heating molds or heating plates is effective. It prevents the sticking and stringing of the melted resin parts to the heating molds or plates, contributing to improved yield and increased productivity through simplified cleaning tasks. If you are struggling with durability issues or problems caused by stringing, we can propose a coating that matches your company’s needs, so please feel free to contact us. 【Features】 ■ Fluororesin coating is effective on heating molds and heating plates ■ Prevents sticking and stringing, improving yield ■ Increases productivity through simplified cleaning tasks *For more details, please refer to the external link page or feel free to contact us.

Introducing the strengths of Florocoat, which has been providing contract processing of fluororesin coatings in Japan for about 60 years. Since 1957, we have offered fluororesin coatings in Japan, and in 2009, we developed and launched cross-linked fluororesin coatings. Our technical capabilities, backed by our track record, will solve your company's challenges. We have obtained ISO 9001 certification at all our domestic factories, and with our well-equipped facilities, we can handle difficult-to-process items. Additionally, we have established a thorough inspection system with comprehensive equipment, including evaluation testing machines compliant with JIS standards. Furthermore, we manufacture jigs and tools in our dedicated manufacturing building. By producing the necessary jigs and tools in-house, we achieve short delivery times. [Strengths of Florocoat] - A manufacturer providing fluororesin coatings since 1957 - High-quality response to difficult-to-process items - Achieving short delivery times with in-house manufactured jigs and tools *For more details, please feel free to contact us.

Fluoropolymer is a thermoplastic polymer composed of fluorine elements (F) found abundantly in fluorite and carbon chains. Since the discovery of PTFE (polytetrafluoroethylene) in 1938, several types of fluoropolymers have been developed. Many fluoropolymers possess excellent properties such as: (1) Non-stickiness (2) Heat resistance (3) Lubricity (4) Chemical resistance (5) Water and oil repellency (6) Abrasion resistance (7) Electrical properties These materials are widely used in coatings, molded products, films, and construction materials. At Fluorocoat, we can provide various types of fluoropolymer coatings. We can accommodate a wide range of thicknesses from several micrometers to several millimeters, for items ranging from small to over 3 meters in size. Our quality control system has also obtained ISO 9001 certification at all domestic factories. *ISO 9001:2015 certification (as of January 10, 2018)* *For more details, please contact us or download the PDF.*

FloroCoat Corporation Video Channel https://www.youtube.com/channel/UCHo2ZUOzV0QPzdj-vHechAg offers the following video content: (1) Adron Coating Introduction Video Digest Version (3 minutes 45 seconds) (2) Adron Coating Introduction Video 1 - Slip Characteristics Introduction (1 minute 19 seconds) (3) Adron Coating Introduction Video 3 - Difficult Adhesion Characteristics Introduction (1 minute 35 seconds) (4) Adron Coating Introduction Video 4 - Slip Characteristics Introduction (1 minute 7 seconds) (5) Adron Coating Introduction Video 6 - Water Repellent Characteristics Introduction (1 minute 7 seconds) (6) Adron Coating Introduction Video 7 - Difficult Adhesion Characteristics Introduction (1 minute 39 seconds) Each video content clearly and easily introduces the effects that can be achieved by utilizing the properties of fluoropolymer coatings. Everyone, please take a look!

Heat exchangers (plate type, tube type) require regular cleaning because sludge adheres to their surfaces over time, reducing thermal conductivity. Previously, we would stop the factory line and hire an external contractor to spend an entire day removing sludge. Additionally, the sludge was as hard as stone, and we had to use wooden mallets to break it off, which often led to deformation or damage to the heat exchangers. By applying a fluoropolymer coating to impart non-adhesive properties, we were able to reduce cleaning time to 2-3 hours, making it easy to remove sludge. This has resulted in reduced working hours and effort, and the heat exchangers are no longer damaged. 【Effects】 ■ Reduction in man-hours due to shorter cleaning time ■ Decreased labor for cleaning tasks ■ Prevention of damage to heat exchangers during cleaning ■ Reduced sludge adhesion, preventing a decline in thermal efficiency *For more details, please refer to the PDF document or feel free to contact us.

A heater used for thermal welding of resin (contact type) is provided with a fluororesin coating on the surface to impart release properties, preventing resin stringing. This makes it difficult for the melted resin to stick, eliminating the need for a release agent application process, and if there are subsequent processes, the removal of the release agent is also unnecessary. This enables a reduction in labor costs and stable production. Performance and durability may vary depending on the type of resin used and the operating temperature, so please consult us. 【Effects】 ■ Improvement of yield due to stringing ■ Simplification of heater cleaning tasks ■ Increase in productivity *For more details, please refer to the PDF document or feel free to contact us.

By applying a fluororesin coating to the gasket (rubber material) of the automobile's gasoline cap, we achieve smooth opening and closing while maintaining gas sealing properties, as well as wear resistance against the opening and closing operation and the ability to follow the expansion and contraction of the rubber. Stable quality and supply through automatic painting robots. Depending on the material, fluororesin coatings can also be applied to rubber and resin parts, and we have numerous achievements in coating mass-produced items such as automobiles. We will design processes suitable for various purposes, shapes, and materials. 【Features】 ■ Stable quality and supply through automatic painting robots - Ensures accuracy and uniformity of film thickness and surface roughness - Supports mass production ■ Paint development - Improves flexibility, elasticity, and adhesion of the coating film *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case where we solved a problem by applying a fluororesin coating to the radiator cap component (negative pressure valve), which provided non-adhesive properties. The coolant liquid previously used, which contained a non-amine-based rust inhibitor, had issues such as damaging the main pressure valve (rubber) and causing the negative pressure valve (SUS) to seize. This led to the coolant liquid being unable to move between the reserve tank and the radiator during low temperatures, resulting in overheating and causing damage or rupture to the radiator. After hearing about these issues from the customer, our company selected the coating. We utilized the non-adhesive properties of the fluororesin to prevent the fixation of the main pressure valve and the negative pressure valve. 【Improvement Effects】 ■ The coating no longer peels off ■ Prevented seizing *For more details, please refer to the PDF document or feel free to contact us.

This document introduces fluoropolymer coatings. It features various properties, including "slipperiness," which has a very low friction coefficient compared to other plastics, "chemical resistance," which is not affected by most chemicals, and "electrical properties," which do not conduct electricity. Additionally, examples of representative coatings for each property and applications that utilize these properties are also included. Please feel free to download and take a look. [Contents (partial)] ■ Water and oil repellency ■ Heat resistance ■ Wear resistance ■ Anti-adhesion ■ Electrical properties *For more details, please refer to the PDF document or feel free to contact us.

This document introduces what can be achieved with fluororesin coatings for automotive parts. It includes body components such as "diaphragms" and "flanges," as well as engine components like "timing belts" and "superchargers," and powertrain components. It supports lightweighting, downsizing for high output, and ECO initiatives. Please feel free to download and take a look. [Contents] ■ Body components ■ Powertrain components ■ Engine components *For more details, please refer to the PDF document or feel free to contact us.

"Hard A" is a high wear-resistant coating that dramatically improves wear resistance, adhesion, hardness, and scratch resistance without compromising the characteristics of heat resistance, non-adhesion, and slip properties inherent in fluoropolymer coatings. This document provides a detailed introduction to the structure, applications, and case studies of this product, accompanied by photos and illustrations. Please feel free to download and take a look. [Contents] ■ What is Hard A ■ Structure of Hard A ■ Applications and case studies of Hard A *For more details, please refer to the PDF document or feel free to contact us.

Fluorocoat Co., Ltd. is a specialist in fluoropolymer coatings. This document provides a detailed explanation of "What is fluoropolymer coating?" Additionally, we showcase various coating achievements, such as "professional-grade frying pans" and "escalator side panels," along with photographs. Our company can propose coating specifications tailored to our customers and provide coating films that maximize the properties of fluoropolymers. Please feel free to download and take a look. [Contents] ■ What is fluoropolymer coating? ■ Let's solve challenges together ■ For example, in such places... *For more details, please refer to the PDF document or feel free to contact us.

This document introduces "fluororesin coatings." It categorizes surface treatments referred to as "fluorocoat," used in home appliances, cooking utensils, exterior painting of automobiles and buildings, and cavity prevention, based on their materials. It explains the types, properties, processing methods, and examples of applications related to fluororesin paints. This document serves as a useful reference when considering implementation, so please take a moment to read it. 【Contents】 ■ Introduction ■ About fluororesins ■ About fluororesin coatings ■ About fluororesin paint systems ■ About modified fluororesin paint systems ■ About processing processes ■ Conclusion *For more details, please refer to the PDF document or feel free to contact us.

This document contains information on metal dissimilar material joining technology. Fluororesin is heat-resistant with a continuous use temperature of 260°C and has high insulation properties, making it suitable as an insulating material. It is introduced that it has good adhesion strength to various metals such as aluminum alloys and stainless steel. [Contents] ■ Test Overview ■ Peel Strength ■ Properties of Fluororesin *For more details, please refer to the PDF document or feel free to contact us.

This document includes examples of high-precision thin-walled inner surface coating. 【Contents】 ■Coating ■Coating Robots ■Destructive Testing After Coating *For more details, please refer to the PDF document or feel free to contact us.