フロロコート Product Lineup

This document is a white paper introducing the types, functions, and application examples of fluoropolymer and fluoropolymer coatings. It explains the development of fluoropolymers, key characteristics, category classifications, specifications for PTFE, PFA, and PFEP coatings, specifications for ETFE, ECTFE, and PVDF coatings, and processing methods. Additionally, it also discusses PFAS, which has been a topic of social concern in recent years. [Contents (partial)] ■ Introduction ■ About fluoropolymers ■ About fluoropolymer coatings ■ About fluoropolymer paint systems ■ About modified fluoropolymer paint systems *For more details, please download the PDF or feel free to contact us.

• Coating Agent

In the medical device industry, hygiene management of products is extremely important. Particularly for parts that require repeated use and cleaning, surface degradation and foreign matter adhesion can become problematic. This can lead to a decrease in equipment performance and an increased risk of infection. ADLON coating maintains the hygienic condition of medical devices by preventing discoloration and scratching of the substrate and improving wear resistance. Low-temperature processing also makes it possible to reduce damage to the base material. 【Usage Scenarios】 - Surgical instruments - Testing equipment - Parts requiring sterilization 【Benefits of Implementation】 - Improved cleanability - Reduced risk of foreign matter adhesion - Enhanced durability of equipment

• Coating Agent

In the telecommunications industry, the stability of signals is extremely important. Deterioration of the covering wire's winding pulley can lead to damage to the covered wire. Traditional rubber lining is costly and has challenges regarding the frequency of replacement. Adroncoat was developed to address these issues. 【Application Scenarios】 - Base stations - Data centers - Communication cable manufacturing 【Benefits of Implementation】 - Stabilization of signal transmission - 90% cost reduction - Improvement in product quality

• Coating Agent

In the robotics industry, the durability and reliability of moving parts are crucial. In particular, pulleys that support the flexible movement of cables have a high replacement frequency due to wear and damage, which can lead to decreased operational rates. Pulleys with coated wires treated with Adron Coat improve wear resistance and contribute to the longevity of robots. 【Usage Scenarios】 - Cable guide for robotic arms - Cable protection for moving parts - Measures against cable wear 【Benefits of Implementation】 - Cost reduction (rubber lining replacement costs) - Improved operational rates of robots - Prevention of scratches on products

• Coating Agent

In the wire manufacturing industry, maintaining product quality and reducing costs are important challenges. In particular, the rubber lining of coated wire winding pulleys needs to be replaced due to wear and deterioration, leading to increased costs. Additionally, scratches on the wire can also cause a decline in quality. Adroncoat contributes to cost reduction and extends product lifespan as an alternative to rubber lining. 【Usage Scenarios】 - Coated wire winding pulleys - Wear countermeasures in the wire manufacturing process - Reduction of rubber lining replacement costs 【Effects of Implementation】 - 90% reduction in rubber lining replacement costs - Prevention of product scratches - Improved wear resistance

• Coating Agent

In the electronic components industry, as miniaturization and high density of products progress, ensuring insulation performance has become an important challenge. The occurrence of short circuits and leakage currents between components significantly undermines product reliability, necessitating coating technologies that achieve high insulation properties. Adron Coating provides excellent insulation and contributes to the performance enhancement of electronic components. 【Usage Scenarios】 - Electronic circuit boards - Connectors - Sensors - Semiconductor devices 【Benefits of Implementation】 - Improved product reliability through enhanced insulation - Increased heat resistance and chemical resistance - Extended product lifespan

• Processing Contract

In the automotive industry, wear resistance is required to improve the durability of parts. For components used in harsh environments, performance degradation due to wear is a challenge. Adron coating offers excellent wear-resistant coatings compatible with PTFE, PFA, and modified paint systems. 【Application Scenes】 - Engine parts - Transmission parts - Brake parts 【Benefits of Implementation】 - Extended lifespan of parts - Reduced maintenance costs - Improved product reliability

• Processing Contract

In the semiconductor industry, controlling contamination during the manufacturing process is extremely important. Surface treatment of materials is a key factor in maintaining a high-purity environment and improving product quality and yield. Adron coating leverages the excellent properties of fluororesin to provide a coating that is ideal for use in high-purity environments. Its non-stick properties prevent foreign substances from adhering and help maintain cleanliness. 【Application Scenarios】 - Semiconductor manufacturing equipment - High-purity reagent containers 【Benefits of Implementation】 - Reduced risk of contamination - Improved product quality - Enhanced yield

• Processing Contract

In the food manufacturing industry, there is a demand for maintaining food quality and improving production efficiency. In particular, the adhesion of food to molds and containers is a significant challenge that reduces product yield, increases cleaning efforts, and hinders productivity. Adron Coating prevents food adhesion with its excellent non-stick properties, addressing these issues. 【Usage Scenarios】 - Food baking trays - Food containers - Food production lines 【Benefits of Implementation】 - Prevention of food adhesion - Reduction in cleaning time - Improvement in yield

• Processing Contract

"Adron Coating" plays a significant role in various fields, from household goods to the space industry, contributing to labor-saving, automation, and the protection of the global environment. Inherited from the fluororesin coating specialist "Tokyo Silicone," we have continuously supported cutting-edge industries and realized our management philosophy of "contributing to society through surface modification technology." It is a coating with excellent non-adhesive properties that make it difficult for substances to stick. 【Compatible Materials】 ■ PTFE ■ PFA ■ Modified paint systems *For more details, please download the PDF or feel free to contact us.

• Processing Contract

Fluoropolymer is a thermoplastic polymer composed of fluorine elements (F) found abundantly in fluorite and carbon chains. Since the discovery of PTFE (polytetrafluoroethylene) in 1938, several types of fluoropolymers have been developed. Many fluoropolymers possess excellent properties such as: (1) Non-stickiness (2) Heat resistance (3) Lubricity (4) Chemical resistance (5) Water and oil repellency (6) Abrasion resistance (7) Electrical properties These materials are widely used in coatings, molded products, films, and construction materials. At Fluorocoat, we can provide various types of fluoropolymer coatings. We can accommodate a wide range of thicknesses from several micrometers to several millimeters, for items ranging from small to over 3 meters in size. Our quality control system has also obtained ISO 9001 certification at all domestic factories. *ISO 9001:2015 certification (as of January 10, 2018)* *For more details, please contact us or download the PDF.*

• Surface treatment contract service

Introducing the strengths of Florocoat, which has been providing contract processing of fluororesin coatings in Japan for about 60 years. Since 1957, we have offered fluororesin coatings in Japan, and in 2009, we developed and launched cross-linked fluororesin coatings. Our technical capabilities, backed by our track record, will solve your company's challenges. We have obtained ISO 9001 certification at all our domestic factories, and with our well-equipped facilities, we can handle difficult-to-process items. Additionally, we have established a thorough inspection system with comprehensive equipment, including evaluation testing machines compliant with JIS standards. Furthermore, we manufacture jigs and tools in our dedicated manufacturing building. By producing the necessary jigs and tools in-house, we achieve short delivery times. [Strengths of Florocoat] - A manufacturer providing fluororesin coatings since 1957 - High-quality response to difficult-to-process items - Achieving short delivery times with in-house manufactured jigs and tools *For more details, please feel free to contact us.

• Surface treatment contract service

The "ADLON (L-4813CR) coating" is a fluoropolymer coating that offers 40% better release properties than conventional PTFE coatings. Traditionally, in the rice cooking line, workers, commonly referred to as the "shamoji team," were needed to drop the cooked rice. By adopting our "ADOLON L-4813CR coating," the need for workers to drop rice from the rice cooker has been eliminated, resulting in reduced labor costs and less rice waste. If you consult with us, we can propose suitable coating applications aimed at improving the yield of your production line. 【Features】 ■ 40% better release properties than conventional PTFE coatings ■ Reduction in labor costs and rice waste ■ Proposal of suitable coating applications *For more details, please refer to the external link page or feel free to contact us.

• Coating Agent
• Surface treatment contract service
• others

"ADLON Coating" has various adoption examples specifically for food machinery manufacturing companies or companies involved in food production and processing. In the washing (flushing) process, it is used in hoppers, chutes, and jar pots. In the cutting and molding process, it is utilized in Baumkuchen sticks, cake molds, and mochi-making machines. If you share with us the issues you are currently facing, we can propose suitable coating specifications. We hope you can use these examples as hints for improving production efficiency and solving problems, and consider adopting "ADLON Coating." 【Adoption Examples (Excerpt)】 ■ Washing (Flushing) - PTFE: Hopper - PFA: Chute - Modified paint: Jar pot ■ Cutting and Molding - PTFE: Baumkuchen stick - PFA: Mochi-making machine - Modified paint: Knife ■ Kneading, Mixing, and Molding - PTFE: Fluffing blade - PFA: Noodle dough - Modified paint: Stirring blade, etc. *For more details, please refer to the external link page or feel free to contact us.

• Coating Agent
• Surface treatment contract service
• others

Are you having trouble with sticking and stringing? For two resin parts (made of thermoplastic resins such as polycarbonate and acrylic), heating them to melt and then joining them together in a molten state, a fluororesin coating on heating molds or heating plates is effective. It prevents the sticking and stringing of the melted resin parts to the heating molds or plates, contributing to improved yield and increased productivity through simplified cleaning tasks. If you are struggling with durability issues or problems caused by stringing, we can propose a coating that matches your company’s needs, so please feel free to contact us. 【Features】 ■ Fluororesin coating is effective on heating molds and heating plates ■ Prevents sticking and stringing, improving yield ■ Increases productivity through simplified cleaning tasks *For more details, please refer to the external link page or feel free to contact us.

• Coating Agent
• Surface treatment contract service
• others

Here are some examples of applications for fluoropolymer coatings. Starting with "heat rollers and pressure rollers for copiers and printers," there are also "protective tubes," "chemical tanks," and "plating jigs," among others. We aim to provide coating films that fully utilize the performance of fluoropolymers. Before giving up on fluoropolymer coatings, please consult with us. 【Examples of Applications】 ■ Fixing release claws and release plates for copiers and printers ■ Evaporators ■ Industrial molds ■ CFRP and CC composites ■ Cutting die rolls for rice cracker production ■ Sushi robot parts, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Surface treatment contract service

This document is a comparison table of the properties of fluoropolymer coatings. It includes various types of coating materials such as "PTFE-based coatings," "ETFE-based coatings," "ECTFE-based coatings," and "fluororubber-based coatings." Please use this information for the utilization of fluoropolymer coatings. 【Types of Coating Materials】 ■ PTFE-based coatings ■ PFA-based coatings ■ FEP-based coatings ■ ETFE-based coatings ■ ECTFE-based coatings ■ Fluororubber-based coatings ■ Modified coatings *For more details, please refer to the PDF document or feel free to contact us.

• Surface treatment contract service

Fluoropolymer is a thermoplastic polymer composed of fluorine (F), which is abundant in fluorite, and carbon chains. It is widely used in coatings, molded products, films, and construction materials as a material with excellent physical properties. Furthermore, "fluoropolymer coatings" play a significant role in various fields, from household goods to the space industry, in streamlining and automating processes or protecting the global environment. 【Characteristics of Fluoropolymer Coatings】 ■ Non-adhesive ■ Heat resistance ■ Slip properties ■ Chemical resistance ■ Water and oil repellency ■ Abrasion resistance ■ Electrical properties *For more details, please refer to the PDF document or feel free to contact us.

• Surface treatment contract service

The seismic isolation devices that are becoming widespread as earthquake countermeasures also utilize our "Adron Coating." Our Adron Coating is used in commercial buildings, single-family homes, hospitals, logistics centers, city halls, and seismic retrofitting. 【Properties (L-4279SL)】 ■ Film thickness (μm): 40±20 ■ Adhesion: 10 points ■ Static friction coefficient: 0.10 ■ Dynamic friction coefficient: 0.08 ■ Features: 2 coats *For more details, please refer to the PDF materials or feel free to contact us.

• Coating Agent

Coating for belts over 100m long—are you still giving up? With FluoroCoat, our unique control system ensures quality management, achieving a uniform coating even for belts exceeding 100m. If you've tried various manufacturers and been turned away, please consult us about our FluoroCoat. 【Features】 ■ Scratch-resistant coating with special undercoating treatment ■ Durability for over 1000 hours in food production lines ■ Reusable substrate (belt) through film stripping and reprocessing ■ Coating can be selected to meet your specific requirements *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent
• Surface treatment contract service
• others

Performance (Functions) Provided by Fluororesin Coating "Adron®" ■ Non-adhesiveness (Example: L-RN100 Coating) ■ Water and oil repellency (Example: L-RN300 Coating) ■ Heat resistance (Example: L-RN100 Coating) ■ Slipperiness (Example: L-RS100 Coating) ■ Wear resistance (Example: L-RS100 Coating) ■ Chemical resistance (Example: L-RK200 Coating) ■ Electrical properties (Example: L-RN300 Coating) *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent
• Surface treatment contract service
• others

The steel belt continuous band oven has adopted the unique ADLON coating "ADLONL-4283GB" developed by Fluorocoat. By automating the removal of baked goods from the steel belt, we were able to reduce personnel by three, as well as achieve improvements in flavor and other benefits.

• Coating Agent
• Surface treatment contract service
• others

We would like to introduce the "Automatic Contact Angle Meter" available at our company. It has become possible to measure contact angles during wetting and the sliding angle when water droplets slide off, which could not be measured with conventional contact angle meters. One of the functions of fluoropolymer-coated films is their water-repellent property. The measurement results from such contact angle meters can be used as one of the criteria for selecting coating films. 【Main Measurement Functions Different from Conventional Methods】 1. Aging changes in the droplet method (conventional contact angle measurement method) 2. Sliding method (contact angle measurement method when water droplets slide off) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

What is "Hard A (Ace)"? It is a high wear-resistant coating that dramatically improves wear resistance, adhesion, hardness, and scratch resistance without compromising the heat resistance, non-adhesiveness, and slip properties of fluoropolymer coatings. If you are concerned about the durability of coating films, please give it a try. *For more details, please refer to the PDF materials or feel free to contact us.

• Coating Agent
• Surface treatment contract service

At Florocoat, we support aspects such as initial evaluation and comparison of evaluations after use (post-testing) through our 60 years of experience and well-equipped evaluation facilities (sample evaluation, actual machine evaluation). We also accept prototype requests starting from one unit, including processing consultations and coating selection. 【Support Details】 ■ Initial evaluation & comparison of evaluations after use (post-testing) (sample evaluation, actual machine evaluation) ■ Prototype support starting from one unit (processing consultations, coating selection) *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent
• Surface treatment contract service

This introduces cases where the heat resistance, cushioning, and rust prevention properties of fluororesin coatings are utilized for adjusting finishing dimensions. In "air conditioning compressors," a coating process of approximately 80μm is performed to prevent galling. In "superchargers," a coating process with a film thickness of over 800μm is implemented to achieve familiarity and prevent galling. 【Practical Examples】 ■ Air Conditioning Compressor - A coating process of approximately 80μm is performed. After coating, machining of the coating film is done, resulting in a coating film without defects inside. ■ Supercharger - A film thickness of over 800μm is achieved. - Material development considering broaching processability is also being conducted. *For more details, please refer to the PDF materials or feel free to contact us.

• Coating Agent
• Surface treatment contract service

The "Adron(r)" coating of Fluoro Coat supports a safe, secure, and convenient life. 1. Quality Through thorough quality control, we fully utilize the performance of fluororesin. 2. Form We accommodate coatings for small, large, and complex shapes, as well as various forms. 3. Materials We have coating achievements not only for metals but also for rubber, resin, glass, ceramics, stone, and more. *For more details, please refer to the PDF materials or feel free to contact us.

• Coating Agent
• Surface treatment contract service
• others

Introducing "Extending the Lifespan of Parts with Nano Coat-S." Nano Coat-S has excellent wear resistance, achieving a longer lifespan for parts. It contributes to reducing defects and improving productivity. 【Comparison of Wear Resistance: Hard Chrome Plating vs. Nano Coat-S】 ■ The wear resistance of Nano Coat-S is over 100 times that of hard chrome plating. ■ Nano Coat-S is hard with a low wear coefficient, making it resistant to wear (up to 15 GPa, μk=0.2). 【Expected Applications】 ■ Various sliding parts ■ Various transport guides, etc. ■ Various film manufacturing processes ■ Prevention of scratches from contact with jigs in continuous printing processes *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

To all those engaged in the food manufacturing and processing industry, as well as the food machinery industry! Fluorocoat's Adron Coating can be applied in many situations within the food manufacturing and processing industry, as well as the food machinery industry! Of course, the coating specifications that can be used in food-related industries are applicable in various fields. If you have issues such as sticking, wanting to improve cleanliness, or enhancing the finish of your products, please let us know your concerns regarding Fluorocoat. With Fluorocoat's Adron Coating, we can provide solutions to your company's challenges! *For more details, please refer to the PDF materials or feel free to contact us.

• Coating Agent

Hard A (Ace) is more durable than fluoropolymer coatings and ceramic coatings. We have published data from reciprocal wear tests. *For more details, please refer to the PDF materials or feel free to contact us.

• Coating Agent
• Surface treatment contract service

In the fluorocoat, we propose challenges and solutions for the adoption of Mg alloy (magnesium alloy) as a trump card for weight reduction. Mg alloy (magnesium alloy) has issues such as susceptibility to corrosion, galvanic corrosion, and oxidation, but by applying a coating, it can be protected from chemicals, prevent galvanic corrosion as an insulator, and also prevent oxidation. This could significantly reduce the weight of vehicles. We also have case studies and achievements related to spray guns. ■ Advantages of Mg alloy (magnesium alloy) - The lightest among practical metals (specific gravity = aluminum 2/3, iron 1/4) - Higher specific strength than Al and iron - Maximum vibration absorption - Abundant resources (the last super metal on Earth) * For more details, please refer to the PDF materials or feel free to contact us.

• Coating Agent
• Surface treatment contract service

The fluoropolymer coating "ADLON" of the fluorocarbon coat can fully utilize the functions of fluoropolymer and may resolve your issues on-site. Fluoropolymer coatings are expressed in various ways, such as fluorocarbon coating, fluorine processing, and Teflon processing. *Note: "Teflon" is a registered trademark of Chemours Company in the United States. Just like the coating on the surface of frying pans, it is provided to various industries, from household goods to the aerospace industry. 【Features】 (1) A pioneer company in fluoropolymer coatings (2) High quality response even for difficult-to-process items (3) Comprehensive inspection system (4) Ability to manufacture necessary tools and jigs in-house (5)

• others

FloroCoat Corporation Video Channel https://www.youtube.com/channel/UCHo2ZUOzV0QPzdj-vHechAg offers the following video content: (1) Adron Coating Introduction Video Digest Version (3 minutes 45 seconds) (2) Adron Coating Introduction Video 1 - Slip Characteristics Introduction (1 minute 19 seconds) (3) Adron Coating Introduction Video 3 - Difficult Adhesion Characteristics Introduction (1 minute 35 seconds) (4) Adron Coating Introduction Video 4 - Slip Characteristics Introduction (1 minute 7 seconds) (5) Adron Coating Introduction Video 6 - Water Repellent Characteristics Introduction (1 minute 7 seconds) (6) Adron Coating Introduction Video 7 - Difficult Adhesion Characteristics Introduction (1 minute 39 seconds) Each video content clearly and easily introduces the effects that can be achieved by utilizing the properties of fluoropolymer coatings. Everyone, please take a look!

• Other surface treatment equipment
• Processing Contract

Fluororesin not only has water-repellent properties but also oil-repellent properties. The video demonstrates that by applying a fluororesin coating (ADLON coating) on a wire mesh, which would normally allow water to pass through, the coating exhibits water-repellent properties, causing water to flow over the surface of the wire mesh.

• others

Fluororesin not only has water-repellent properties but also oil-repellent properties. The video demonstrates using a model that applying a fluororesin coating (Adron coating) can reduce the amount of plating solution taken out from the plating bath.

• others

Heat exchangers (plate type, tube type) require regular cleaning because sludge adheres to their surfaces over time, reducing thermal conductivity. Previously, we would stop the factory line and hire an external contractor to spend an entire day removing sludge. Additionally, the sludge was as hard as stone, and we had to use wooden mallets to break it off, which often led to deformation or damage to the heat exchangers. By applying a fluoropolymer coating to impart non-adhesive properties, we were able to reduce cleaning time to 2-3 hours, making it easy to remove sludge. This has resulted in reduced working hours and effort, and the heat exchangers are no longer damaged. 【Effects】 ■ Reduction in man-hours due to shorter cleaning time ■ Decreased labor for cleaning tasks ■ Prevention of damage to heat exchangers during cleaning ■ Reduced sludge adhesion, preventing a decline in thermal efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent
• Heat exchanger

A heater used for thermal welding of resin (contact type) is provided with a fluororesin coating on the surface to impart release properties, preventing resin stringing. This makes it difficult for the melted resin to stick, eliminating the need for a release agent application process, and if there are subsequent processes, the removal of the release agent is also unnecessary. This enables a reduction in labor costs and stable production. Performance and durability may vary depending on the type of resin used and the operating temperature, so please consult us. 【Effects】 ■ Improvement of yield due to stringing ■ Simplification of heater cleaning tasks ■ Increase in productivity *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent
• Resin processing machine

By applying a fluororesin coating to the gasket (rubber material) of the automobile's gasoline cap, we achieve smooth opening and closing while maintaining gas sealing properties, as well as wear resistance against the opening and closing operation and the ability to follow the expansion and contraction of the rubber. Stable quality and supply through automatic painting robots. Depending on the material, fluororesin coatings can also be applied to rubber and resin parts, and we have numerous achievements in coating mass-produced items such as automobiles. We will design processes suitable for various purposes, shapes, and materials. 【Features】 ■ Stable quality and supply through automatic painting robots - Ensures accuracy and uniformity of film thickness and surface roughness - Supports mass production ■ Paint development - Improves flexibility, elasticity, and adhesion of the coating film *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent
• Rubber

We would like to introduce a case where we solved a problem by applying a fluororesin coating to the radiator cap component (negative pressure valve), which provided non-adhesive properties. The coolant liquid previously used, which contained a non-amine-based rust inhibitor, had issues such as damaging the main pressure valve (rubber) and causing the negative pressure valve (SUS) to seize. This led to the coolant liquid being unable to move between the reserve tank and the radiator during low temperatures, resulting in overheating and causing damage or rupture to the radiator. After hearing about these issues from the customer, our company selected the coating. We utilized the non-adhesive properties of the fluororesin to prevent the fixation of the main pressure valve and the negative pressure valve. 【Improvement Effects】 ■ The coating no longer peels off ■ Prevented seizing *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent
• Rubber
• stainless

We would like to introduce our fluororesin coating "ADLON Coating." It is used for coating food machinery, seismic isolation devices that absorb earthquake vibrations smoothly, adhesion to heat welding molds (plates), and preventing stringing, among other applications. For food utensils and packaging containers, we comply with the positive list system, which only uses substances that have been evaluated for safety. Additionally, the Adron L-R series 'L-RN400' showed an improvement of over 20% in release effect compared to typical coatings in rice cooking tests (reference value). [Examples of Applications (Excerpt)] - Cake molds and rice cake making machines - Noodle dough rolling rolls - Bread packaging machines - Seismic isolation device "slip plate" - Heat welding molds for manufacturing automotive tail lamps *For more details, please refer to the PDF materials or feel free to contact us.

• Coating Agent

This document introduces the challenges and countermeasures related to the adoption of CFRP (Carbon Fiber Reinforced Plastic). It lists various issues such as "inability to achieve continuous production (high cost)," "need for specialized molding techniques," and "handling of epoxy binders." Additionally, it provides detailed solutions through coatings and information about the filament winding molding method. We encourage you to read it. [Contents] ■ Challenges ■ Solutions ■ Benefits of Solutions ■ Filament Winding Molding Method *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

This document introduces the challenges and solutions related to the adoption of Mg alloys. It includes various issues such as "prone to corrosion," "prone to galvanic corrosion (when in contact with dissimilar metals)," and "prone to oxidation (cannot be used for exterior parts)." Additionally, it presents solutions through coatings and case studies of coatings applied to hand spray guns (made of Mg alloy). We encourage you to read it. [Contents] ■Challenges ■Solutions ■Benefits of Solutions ■Case Study: Coating on Hand Spray Guns (Made of Mg Alloy) *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

This document discusses measures for release agents in epoxy binders (adhesives). It introduces various benefits, such as "forming is possible without a release agent when applying ADLON coat to copper wire coil molds" and "there is no residue of release agents, allowing for post-processing (re-adhesion and painting)." Additionally, it includes information on the prepreg press molding method and examples of adoption. Please feel free to download and take a look. [Contents] ■ Benefits ■ Prepreg press molding method ■ Examples of adoption *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

This document introduces fluoropolymer coatings. It features various properties, including "slipperiness," which has a very low friction coefficient compared to other plastics, "chemical resistance," which is not affected by most chemicals, and "electrical properties," which do not conduct electricity. Additionally, examples of representative coatings for each property and applications that utilize these properties are also included. Please feel free to download and take a look. [Contents (partial)] ■ Water and oil repellency ■ Heat resistance ■ Wear resistance ■ Anti-adhesion ■ Electrical properties *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

This document explains surface treatment for superchargers. It includes sections such as "Coating a supercharger with ADLON L-RK200" and "Coating a turbocharger with ADLON." The coating on turbochargers is expected to reduce the adhesion of carbon and oil contaminants contained in exhaust gases, as well as stabilize the clearance with the wheel. Please feel free to download and take a look. 【Contents】 ■ Coating a supercharger with ADLON L-RK200 - Expected effects ■ Coating a turbocharger with ADLON - Expected effects *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent