藤川伝導機 List of Products and Services

We would like to introduce our "Valve Seat Surface Runout Measuring Tool." By adopting a unique reference bar method, it is possible to easily measure the surface runout (concentricity) of the seat surface based on the valve guide hole in the engine and cylinder head. If the diameter of the valve guide hole is the same, it can accommodate many workpieces with just an adjustment at the dial gauge mounting part. 【Features】 ■ Reduces variability caused by the operator ■ The reference bar expands to a zero gap state against the finished diameter of the guide hole (0.05φ tolerance range), allowing measurement without being affected by the hole diameter ■ Easy maintenance ■ A series with improved rigidity and stability is also available *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the "OZAK Linear Bearings" that we handle. We offer a variety of options including single, double, and triple lengths, as well as round, square, and oval flanged bearing units, rust-resistant types, various grease-filled options, and maintenance-free models to accommodate various applications. Additionally, we also have the Ultra Series, which can withstand harsh specifications and offers ultra-long life. Please feel free to contact us when you need assistance. 【Features】 ■ Wide variety ■ High reliability to low cost based on rank classification ■ Rust-resistant series ■ Series with lubrication holes ■ Maintenance-free series ■ Ultra-long life Ultra series *For more details, please refer to the PDF document or feel free to contact us.

The "IKO Ball Spline Series" is a linear motion guide device where the outer cylinder moves in a straight line along the spline shaft. There are two types in the lineup: the C-Roove Ball Spline G "MAG Series" and the Ball Spline G "LSAG Series." The structure allows steel balls to roll along the spline grooves, enabling it to handle not only radial loads but also rotational torque. Additionally, it features a compatible system with a free combination specification, allowing for flexible combinations of types, precision, and preload. 【Features】 ■ Compact yet high rigidity ■ High precision for accurate positioning ■ Low friction for smooth operation ■ Combines high-speed durability with maintenance-free performance ■ Free combination specification *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our micro precision positioning table 'TM'. By combining a high-lead ball screw with a high-torque AC servo motor, high-speed movement is possible without sacrificing accuracy. The slide table is available in two types: standard table and long table. Additionally, it is possible to specify the built-in sensors for the origin, pre-origin, CW limit, and CCW limit while keeping the external dimensions unchanged. 【Points】 ■ Ultra-small positioning table with a cross-section height of 20mm and width of 17mm driven by a ground ball screw ■ Achieves a maximum table speed of 75mm/s ■ Table specifications can be selected according to application ■ Optionally, ultra-small sensors can also be built-in *For more details, please refer to the PDF document or feel free to contact us.

This catalog introduces "Linear Bearings." It features a rich lineup including "Basic Technology," "Linear Bearings," "Linear Shafts & Shaft Blocks," and more. With photos and diagrams included, it serves as a helpful reference when considering implementation. We encourage you to read it. 【Contents (partial)】 ■Basic Technology ■Linear Bearings ■Linear Shafts & Shaft Blocks ■Linear Guides ■Lead Screws *For more details, please refer to the PDF document or feel free to contact us.

This catalog introduces "linear guide devices." Featuring a rich lineup, including the ultra-compact "Ball Type Miniature Series" created through our unique small-sizing technology, the "Ball Type Low Profile Lightweight Series" which achieves high load capacity, and the versatile "Ball Type Compact Series." It includes photographs and diagrams, making it easy to reference when considering implementation. We encourage you to take a look. 【Featured Products (Partial)】 ■ Ball Type Miniature Series ■ Ball Type Miniature Value Series ■ Ball Type Low Profile Lightweight Series ■ Ball Type Compact Series ■ Ball Type High Rigidity Series *For more details, please refer to the PDF document or feel free to contact us.

This catalog introduces "linear guide devices." It features a rich lineup including the "cross roller way," which incorporates cylindrical rollers with retainers between two guide rails, the "ball slide," which achieves light and smooth operation, and the "ball spline," where the outer cylinder transmits torque while moving linearly along a spline shaft. The catalog also includes product features illustrated with photos and diagrams, making it a useful reference when considering implementation. We encourage you to take a look. [Featured Products] ■ Cross Roller Way ■ Ball Slide ■ Ball Spline ■ Linear Bushing ■ Stroke Rotary Bushing ■ Roller Way Flat Cage *For more details, please refer to the PDF document or feel free to contact us.

This catalog provides detailed information about the products handled by SBC Corporation. It introduces linear products such as our main products, linear rails, rolled ball screws, and support units, which are supplied to the global market. It also includes information on the composition of blocks and the selection process for linear rail systems, so please take a moment to read through it. 【Featured Products (Excerpt)】 ■ Linear Rails ■ Miniature Linear Rails ■ Roller Linear Rails ■ Linear Bushings ■ Rolled Ball Screws *For more details, please refer to the PDF document or feel free to contact us.

This catalog introduces the "Slide Shaft" products handled by our company. It includes information on the materials of products such as "HGS," "HGQ," and "HGP," as well as surface hardness, surface roughness, specifications, and lengths. Additionally, we also provide calculations for deflection amount and deflection angle under shaft usage conditions. Please make use of this information for product selection. 【Featured Products (Excerpt)】 ■ HGS Standard Slide Shaft ■ HGQ Standard Stainless Steel Slide Shaft ■ HGP Standard Pipe Slide Shaft ■ HGP Standard Small Diameter Pipe Slide Shaft *For more details, please refer to the PDF document or feel free to contact us.

This catalog introduces the "Slide Shaft Machining Standard Products" handled by our company. It includes products such as "STP," "WTP," and "SDN." Specifications such as nominal diameter and standard dimensions are also provided. Please make use of this for selecting products. 【Featured Products (Excerpt)】 ■STP Single-Sided Tapped Machining Standard Products ■WTP Double-Sided Tapped Machining Standard Products ■SDN Single-Sided Step Machining Standard Products ■WDN Double-Sided Step Machining Standard Products *For more details, please refer to the PDF document or feel free to contact us.

This catalog introduces the "30-degree trapezoidal screws" that we handle. It includes information on the materials of products such as "TMR," "TML," and "TMK," as well as details on single pitch error, cumulative pitch error, and standard lengths. Additionally, it explains the selection of screw shafts, the range of screw usage, friction coefficients, and tolerance accuracy. Please make use of this information for product selection. 【Featured Products (Excerpt)】 ■ TMR Standard Rolled 30-degree Trapezoidal Screw Shaft ■ TML Standard Cut 30-degree Trapezoidal Screw Shaft ■ TMK Standard High-Strength Material 30-degree Trapezoidal Screw Shaft ■ TMS Standard Stainless Steel 30-degree Trapezoidal Screw Shaft (Cut) ■ TMSR Standard Stainless Steel 30-degree Trapezoidal Screw Shaft (Rolled) *For more details, please refer to the PDF document or feel free to contact us.

This catalog introduces the "High Lead Screws" that we handle. It includes information on products such as the "Standard 30-Degree Trapezoidal High Lead Screw Shaft" and the "Standard Round Flange Nut," detailing their materials, dimensions, and weights. Additionally, we also present specifications for additional processing dimensions at the screw shaft end. We encourage you to read through it. 【Contents (Excerpt)】 ■ TMH4 Standard 30-Degree Trapezoidal High Lead Screw Shaft ■ TTMH4 Standard Round Flange Nut ■ TMH8 Standard 30-Degree Trapezoidal High Lead Screw Shaft ■ TTMH8 Standard Round Flange Nut ■ TMHSP Standard High Lead Screw Shaft *For more details, please refer to the PDF document or feel free to contact us.

The "TMH" is a small-diameter high-lead screw made of SUS303 material. The single pitch error is ±0.02mm. Available in 2-start, 4-start, and 8-start configurations. Additionally, we also offer the small-diameter high-lead screw nut "PATM" made of polyacetal resin. 【Features】 ■ Material: SUS303 ■ Single pitch error: ±0.02(mm) ■ Cumulative pitch error: ±0.20/300(mm) *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our small-diameter feed screw shaft 'MST'. The material used is S45C (carbon steel for machine structures). We offer five different model numbers. Additionally, we also have a small-diameter feed screw nut 'MSN' made of BC6 (bronze casting) in our lineup. 【Specifications (partial)】 ■ Model number: MST05008 ■ Nominal outer diameter (mm): 5 ■ Pitch: 0.8 ■ Lead (mm): 0.8 ■ Number of starts: 1 ■ Standard length L (mm): 400 *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our small-diameter spherical feed screw nut 'MSN'. The material is polyacetal resin (POM). We offer six different model numbers. Additionally, we also have the backlash-free type "SRS" and the small-diameter spherical feed screw shaft "MRS" available in the same nut. 【Features】 ■ Material: Polyacetal resin (POM) ■ Thrust clearance: 0.15 mm or less *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our precision grinding feed screw shaft 'TMG'. We also offer surface treatment, and upon request, high-frequency hardening and carburizing are possible. This product primarily focuses on individual responses to customer needs, and the specifications will be set through consultation. 【Materials】 ■ Male thread: SK, SUJ, SC, SCM, SNCM, SUS, and others ■ Female thread: BC, ALBC, PBC, other copper alloys, resin, and others *For more details, please refer to the PDF document or feel free to contact us.

"LWLF2" is a super compact linear guide device created using unique small sizing technology. The track rail is designed with a tapped rail specification, ensuring secure fixation. Due to its structure, which arranges steel balls in two rows that contact the track at four points, it achieves not only an extremely small size but also stable precision and rigidity even in applications where loads with varying directions and magnitudes, as well as combined loads, are applied. 【Features】 ■ Easy assembly ■ Ultra-compact sizing ■ Made of stainless steel with excellent corrosion resistance *For more details, please refer to the PDF document or feel free to contact us.

The "SA200DE" is an alignment stage that has been newly added with the standard setting of SA200DE/X, which is an X-table for linear positioning. By combining it with the SA200DE/S, which is for rotational positioning, it is possible to easily construct an extremely compact alignment stage that can move in three directions: XYθ axes. Compared to stages driven by ball screws, it achieves an extremely low profile height. 【Features】 ■ Free combination of XYθ axes ■ Thin and compact ■ Energy-efficient with high tact *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce our precision positioning table 'LH'. It features a long-term maintenance-free design with an integrated C-groove. The optimal amount of oil is always maintained in the load area, ensuring long-lasting lubrication performance, and new lubricant is continuously supplied to the surface of the capillary lubrication body that comes into contact with the rolling elements from other parts. We offer both single-axis and dual-axis configurations with high travel accuracy and positioning precision. 【Features】 ■ High reliability and precision with carefully selected components ■ High rigidity with a large load capacity ■ High travel accuracy and positioning precision ■ Available in a series up to an ultra-large size with a table width of 420mm ■ Long-term maintenance-free design with an integrated C-groove *For more details, please refer to the PDF document or feel free to contact us.

The "TX Series" is a high-precision positioning table with single-axis specifications that enables high-precision positioning control through full closed-loop control, and it can be specified with a linear encoder. An absolute type linear encoder has been newly added, allowing customers to select a suitable linear encoder for their equipment. Additionally, we also offer an orthogonal two-axis specification (CTX...M). 【Features】 ■ Newly added absolute type linear encoder ■ Ability to select a suitable linear encoder for customer equipment ■ Extensive size variations ■ Orthogonal two-axis specification (CTX...M) also available *For more details, please refer to the PDF document or feel free to contact us.

The "Linear Roller Way Super X" is an infinite motion type linear guide device that features a highly rigid casing with four rows of cylindrical rollers arranged in a balanced manner. Similar to general roller bearings, it employs a flange guide, condensing IKO's unique know-how to ensure smoother circulation of the cylindrical rollers within the guide. Additionally, the two pairs of V-shaped raceway surfaces are arranged at a contact angle of 45 degrees, allowing the structure to withstand loads and moments from all directions. 【Features】 ■ Increased rated load due to improved contact area at load points ■ Enhanced machining accuracy due to increased rigidity of rolling elements ■ Improved vibration damping for better product quality ■ Enhanced tracking performance with a small friction coefficient ■ Minimal wear from operation, ensuring stable accuracy ■ Reduction of minor pulsations during roller operation *For more details, please download the PDF or feel free to contact us.

This document introduces the IKO Mechatronics series, which excels in various scenes such as transporting, arranging, assembling, and measuring. It features products like the ball screw-driven, high-precision "High-Precision Positioning Table TX" and the compact "Nano Linear NT-V" driven by linear motors. The IKO Mechatronics series is produced at the Toki Mechatronics Center, a mechatronics production facility that combines advanced equipment with a high-quality production system. [Contents] ■ Want to move workpieces from one line in the factory to another ■ Want to neatly arrange many workpieces within a space ■ Want to quickly and accurately attach small parts to designated positions ■ Want to accurately adjust the distance and position with workpieces and detect them with sensors ■ IKO Mechatronics series lineup *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Pick and Place Unit" that we handle. In addition to the original dedicated drivers from IKO and SMAC, drivers compatible with motion networks such as EtherCAT and SSCNET III/H are also available. This allows for the construction of more advanced systems with reduced wiring. The SMAC actuator is equipped with a soft landing control function that gently places the rod tip on the work surface. 【Features】 ■ Clean linear motor-driven unit ■ Thin multi-link twin head with rotation mechanism ■ Thrust control suitable for handling and assembling fine parts ■ Supports various combinations and customization *For more details, please download the PDF or feel free to contact us.

This catalog introduces the lineup of IKO's linear motion series. It features a wide range of products including cross roller ways, ball slides, ball splines, linear bushings, and stroke rotary bushings. IKO linear guiding devices are widely used as positioning component parts that support the performance of various industrial machines, including machine tools, semiconductor and LCD manufacturing equipment, robots, and measuring instruments, boasting numerous achievements. [Contents (partial)] ■ Full lineup of linear motion series ■ Classification and features of the linear motion series ■ Explanation and dimension tables for each product series ■ Features of the IKO cross roller way series ■ Cross roller way with built-in rack and pinion *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Linear Motor" series. Starting with the compact and high-precision positioning table "IKO Linear Motor Table LT," which incorporates an optical linear encoder, we also offer the "PBA Linear Motor Actuator," which achieves low-speed ripple and high stability. Additionally, we have a range of compact linear motor series including "IKO Nano Linear NT," "IKO Alignment Stage SA," and "SMAC Actuator." 【Unit Solutions】 ■ Panel transport equipment (Gantry synchronized stage) ■ Optical positioning module (XY stage) ■ High-precision multi-link twin unit ■ Thrust control twin unit ■ High-speed multi-link unit *For more details, please download the PDF or feel free to contact us.

The "Liquid Crystal Lubrication Series" is a linear guide device and needle product that incorporates a newly developed high-performance liquid crystal lubricant, which is neither grease nor oil. Since it is composed only of carbon, hydrogen, and oxygen, it does not contain organic fluorine compounds and is also halogen-free. No harmful gases are generated during combustion. It is capable of reducing sliding resistance across a wide speed range, from low to high speeds. It also contributes to the performance improvement of high-precision positioning devices such as linear motor tables. 【Features】 ■ Consideration for the environment ■ Vacuum characteristics ■ Excellent lubrication durability ■ Sliding characteristics *For more details, please download the PDF or feel free to contact us.

This document is a proposal regarding the realization of carbon neutrality through IKO Eco Products. It introduces our efforts in product development, including the C-Lube Maintenance-Free Series and the Liquid Crystal Lubrication Series, as well as our initiatives in energy-saving measures and the procurement of renewable energy. IKO products contribute to the reduction of CO2 emissions throughout the entire product life cycle. [Contents (partial)] ■ C-Lube Maintenance-Free Series ■ Liquid Crystal Lubrication Series ■ Linear Roller Way Series ■ Linear Way Series ■ Cam Follower Series *For more details, please download the PDF or feel free to contact us.