藤川伝導機 List of Products and Services

This book introduces the configuration of each product in the handle automation unit. It provides detailed explanations of the configuration of transmitters and devices, as well as connection examples, using diagrams and tables. Before using each product, please read the instruction manual carefully and ensure you understand the correct usage. [Contents] ■ Introduction ■ Overview ■ Equipment Selection ■ Revision History *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the "Handle Automation Unit" that we offer. We have a variety of products available, including the Modbus-compatible "EPU-210" and the "EPU-100," which can automate the positioning mechanisms of devices and equipment. Please feel free to contact us when you need assistance. 【Product Lineup (Excerpt)】 ■EPU-210 ■EPU-220 ■EPU-100 ■EPC-200-CC ■EPC-210-EIP *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "Lite Series" is a flexible joint that adopts a newly designed pressed flange. We offer three products: "CLEAN FLEXLite," suitable for pump surroundings; "TANK FLEXLite," suitable for water tank surroundings; and "TWIN FLEXLite," suitable for heat source equipment surroundings. Using the included flat washer increases strength. 【Features】 ■ Newly designed pressed flange ■ Leaching performance (compliant with Ministry of Health, Labour and Welfare Ordinance No. 14 "Ordinance on the Structure and Materials of Water Supply Equipment") ■ Pressure and depressurization cycling performance test for 200,000 cycles ■ Dacro treatment resistant to rust *For more details, please download the PDF or feel free to contact us.

• joint

This catalog introduces Kurashiki Kako's "Vibration Isolation Series for Building Equipment." It includes detailed information on guidelines for implementing vibration isolation measures, case studies of vibration isolation bases, and a series of vibration isolation components. Additionally, reference materials are also included, so please take a moment to read through them. 【Contents (Excerpt)】 ■ Vibration Isolation Measures and Guidelines ■ Vibration Isolation Design and Support ■ Vibration Isolation Bases ■ Hanging Vibration Isolation ■ Vibration Isolation Parts *For more details, please download the PDF or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

The "e-Stable" is an active vibration isolation table available in two types: linear motor control and pneumatic control. The vibration-damping linear active isolation table newly developed by Kurashiki Kako pursues the advantages of both types. Please feel free to contact us when you need assistance. 【Features】 ■ Achieves vibration-damping performance that greatly exceeds that of the pneumatic control type ■ Significantly improves productivity ■ Equipped with motion feedforward control ■ Allows for more accurate position control by inputting stage movement information in advance ■ Maximizes the performance of high-resolution devices ■ Consumes very little air *For more details, please download the PDF or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

We would like to introduce our "Tabletop Vibration Isolation Table" that we handle. We offer a lineup of four products, including the "p-Stable 50C Series," which is designed for clean rooms with dust prevention specifications, and the "p-Stable 51 Series," which features air damper vibration isolation rubber. Please feel free to contact us when you need assistance. 【Product Lineup】 ■p-Stable ・50C Series ・51 Series ・53 Series ■e-Stable ・Mini Series *For more details, please download the PDF or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

This product is a natural rubber seismic isolation system with a structure in which each rubber layer is completely separated by steel plates. By removing the protective rubber, the thickness and total number of each rubber layer, as well as the deformation and parallelism of the steel plates, can be visually confirmed. It has stable restoring force and is designed to be less prone to buckling even when subjected to large deformations. 【Features】 ■ Easy maintenance ■ Stable horizontal stiffness ■ Low dependency of horizontal stiffness on surface pressure ■ Steel plates are resistant to plastic deformation *For more details, please download the PDF or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

This catalog introduces "Seismic Supplex," a flexible joint for seismic isolation provided by a seismic isolation laminated rubber manufacturer. It includes detailed information on seismic structures, selection procedures, and system variations. Our product is a flexible joint for seismic isolation provided by a seismic isolation laminated rubber manufacturer, designed to flexibly absorb earthquake vibrations, ensuring the safety of building lifelines and supporting a secure living environment for everyone. [Contents (excerpt)] ■ Supplex Bender Series ■ About Seismic Isolation Structures ■ Supplex Selection Procedure ■ System Variations by Category *For more details, please download the PDF or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

We would like to introduce the 'MXH2 Series' that we handle. By extending the length of the guide section of the linear guide, we improve rigidity. This significantly reduces the table displacement during moment action. Additionally, if you need to change the port position, we offer a custom product number -XC3□. 【Features】 ■ 48% reduction in pitch direction displacement ■ 63% reduction in yaw direction displacement ■ 90% reduction in roll direction displacement ■ Achieves high rigidity ■ Up to 6% reduction in weight ■ Compatible with compact auto switches *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the 'SJ1000/2000/3000/4000 Series' that we handle. It adopts a 34-pin connector. With a double solenoid, it can support up to 16 connections, and with a single solenoid, it can support up to 32 connections. By sliding the switch, it prevents the manual from being pressed, thus preventing erroneous operations. 【Features】 ■ Supports non-plug-in individual wiring ■ The manifold uses non-halogen lead wires ■ Equipped with a switch (compatible with connector connection) ■ Replaceable fittings ■ Valve connection mechanism *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "HF3-JSX Series" is a 2-port solenoid valve that pursues optimal magnetic efficiency, improving the coil's suction power by 10% compared to conventional products, while reducing power consumption by 14%. The coil can rotate 360°, making it easy to handle the lead wires. By converting to DC through full-wave rectification, it reduces humming noise. Please feel free to contact us when you need assistance. 【Features】 ■ Energy-saving ■ Stopper structure ■ Protection structure IP67 ■ Lead wires can be extracted 360° ■ Improved corrosion resistance of the core ■ Body material SUS *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PFCQ Series" is an air flow controller that adjusts the flow rate by moving a valve body attached to a built-in linear motor. When a flow command signal is input to the product, the built-in calculation circuit compares the flow rate measured by the flow sensor, and based on that value, drives the linear motor to control the flow rate. When the power is OFF, the valve closes due to the attraction of the permanent magnet in the linear motor (normally closed). 【Features】 ■ Flow control range: 9–300 L/min ■ Operating differential pressure range: 0.05–0.5 MPa ■ Time to reach set flow rate: 0.5 seconds or less (at operating differential pressure of 0.3 MPa and flow rate setting of 300 L/min) ■ Control accuracy: ±3% F.S. ■ Non-grease *For more details, please download the PDF or feel free to contact us.

• controller

The "ITV1100/2100/3100 Series" is a pneumatic regulator that can control multiple pressure reducing valves with a single unit. By adjusting the gain, it is possible to change the responsiveness. Additionally, by adjusting the sensitivity, the corrective action of pressure near the set pressure will change. 【Features】 ■ High flow rate, up to approximately 5 times ■ Lightweight, up to 19% reduction ■ Multi-stage pressure control ■ Compact, height reduction of up to 10mm ■ Modular connection available *For more details, please download the PDF or feel free to contact us.

• Flow Control

The "JSXH-X2" is a pilot-type 2-port solenoid valve with an improved environmental resistance and an IP67 structure. The cover can be removed for cleaning or replacing the main valve section. It is designed for use in applications such as high-pressure washing, fountains, and spraying. Please feel free to contact us when you need assistance. 【Features】 ■ Improved environmental resistance ■ IP67 structure ■ Power consumption: 8W ■ Weight: 960g (diameter: 3/8), 920g (diameter: 1/2) ■ Easy maintenance *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce our lifespan-enhancing cylinder, the 'CXS2-XB24'. Thanks to new technology, we have achieved over four times the durability. The specifications and external dimensions are the same as the existing product (Dual Rod Cylinder CXS2 Series). Please feel free to contact us when you need assistance. 【Specifications】 ■ Bearing Type: Sliding Bearing ■ Tube Inner Diameter (mm): 6, 10, 16, 20, 25, 32 ■ Cushion: Rubber Cushion ■ Standard Stroke (mm) ・φ6: 10–100 ・φ10: 10–150 ・φ16 to φ32: 10–200 *For more details, please download the PDF or feel free to contact us.

• cylinder

The "JSY1000-E Series" is a valve manifold that integrates equipment for applications using both actuators and vacuum suction. By combining a check valve ejector with a built-in pressure sensor, the air consumption during vacuum generation of the spacer-type ejector is reduced by 90%. Additionally, by combining the newly developed spacer-type ejector with a solenoid valve, it allows for differentiation based on application needs. 【Features】 ■ 64% reduction in installation area ■ 42% reduction in weight ■ Energy-saving function ■ Pilot air control unit ■ Spacer-type ejector ■ 4-position, 5-port valve *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the pilot check valve equipped speed controller 'ASP Series' that we handle. It can be installed in narrow spaces. The stainless steel type does not use materials primarily composed of copper (Cu) or zinc (Zn). Please feel free to contact us when you need assistance. 【Features】 ■ Available in horizontal and vertical types to suit installation conditions ■ Improved installation workability with hex wrench * For more details, please download the PDF or feel free to contact us.

• controller

The "IN502-44/45" is an air flow controller capable of automatic flow adjustment. By utilizing a pressure sensor for flow conversion (differential pressure type) and a temperature sensor for flow temperature compensation, it enables measurement and output. In "tolerance mode" for switch output, the switch will activate when the controlled flow falls within a specified tolerance range of the flow command value. 【Features】 ■ Control accuracy ±5% F.S. ■ Response time under 0.5s ■ Automatic control of set flow ■ Reduction of installation labor ■ Mitigation of the effects of load fluctuations *For more details, please download the PDF or feel free to contact us.

• controller

The "JSXF/JSXFA Series" is a valve for dust collectors that uses high-strength elastomers. It features a springless structure with a diaphragm integrated into the valve. With its "springless" and "integrated diaphragm structure," it allows for easy replacement, and we also provide a maintenance kit that includes the main valve and sub-valve (for 40A). 【Features】 ■ Eliminates the need for a control box, enabling reduced wiring ■ A single base valve can control up to 31 remote valves ■ When combined with a differential pressure sensor (provided by the customer), it can detect filter clogging ■ OFF response time: reduced by 45% ■ Easy maintenance *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce our longevity-enhancing cylinder, the 'CUJ-XB24'. Thanks to new technology, its durability is more than four times that of existing products (Mini Free Mount Cylinder CUJ Series). The specifications and external dimensions are the same. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Operating method: Double-acting ■ Fluid used: Air ■ Guaranteed pressure resistance: 1.05 MPa ■ Maximum operating pressure: 0.7 MPa ■ Ambient temperature and fluid temperature ・ Without auto switch: -10℃ to 70℃ (provided there is no freezing) ・ With auto switch: -10℃ to 60℃ (provided there is no freezing) *For more details, please download the PDF or feel free to contact us.

• cylinder

The "RMH□ Series" is an air gripper for collaborative robots that can operate by simply connecting one air supply tube and one electrical wiring. With simple operations, tool changes are made easy, allowing for a reduction in labor hours. Tool fixation is achieved by tightening just two clamping bolts. Please feel free to contact us when you need assistance. 【Features】 ■ Three types of grippers available according to the workpiece ■ Compatible with 12 brands of collaborative robots ■ Standard equipped with a manual changer ■ Air consumption reduced by up to 80% ■ Improved installation and maintenance *For more details, please download the PDF or feel free to contact us.

• Other industrial robots

The "ZP3M Series" features a bowl shape with diagonally arranged ribs to ensure grip in all directions. It has a horizontal holding force of 387N (pad diameter ø100) and is suitable for high-temperature work (up to 200°C). Oil is discharged from the grooves between the special ribs, preventing lateral slippage of the workpiece even on oil-coated steel plates. 【Features】 ■ Improved lifespan (more than double that of urethane) ■ Anti-slip special ribs ■ Excellent followability with bowl shape ■ Compatible with oil-coated workpieces ■ Bowl shape accommodates curved workpieces ■ Can be mounted from the bottom *For more details, please download the PDF or feel free to contact us.

• Other work tools

This catalog introduces collaborative robot grippers from SMC Corporation. It features two products: the flange-mounted pad "ZXP7-PFL1-□-X1" and the air gripper "JMHZ2-X7500-KR." It includes details on each product's characteristics, specifications, and dimensional drawings. Please make use of this information when selecting products. [Contents (Flange-mounted Pad)] ■ Features ■ Pad Variation Examples ■ Specifications ■ Model Number Display Method ■ Dimensional Drawings ■ Individual Product Precautions *For more details, please download the PDF or feel free to contact us.

• Other industrial robots

The "HRS040-A-20-T1-X158/X164" is a compact circulating liquid temperature control device that operates at low temperatures of -10°C. It has a cooling capacity of 1kW (at -10°C), a temperature stability of ±0.1°C, and a set temperature range of -10°C to 40°C. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Cooling method: Air-cooled refrigeration ■ Temperature control method: PID control ■ Set temperature range/temperature stability (°C): -10 to 40 / ±0.1 ■ Cooling capacity (50Hz/60Hz) W: 1000/1000 ■ Refrigerant specification: R410A (HFC), 0.53kg *For more details, please download the PDF or feel free to contact us.

• Temperature and Humidity Control

The "JSB Series" is an angle seat valve/air-operated type that achieves a large flow rate through optimized flow path design (approximately 2.5 times Cv). It features a squeeze packing with a scraper function added for liquid leakage prevention. It also includes a guide push to prevent shaft wobble and extend the lifespan of the squeeze packing. Please feel free to contact us when you need assistance. 【Features】 ■ Long lifespan ■ Low pressure loss / large flow rate ■ Compact size ■ Low leakage ■ All-in-one ■ Clean design *For more details, please download the PDF or feel free to contact us.

• valve

The "IBG Series" is an impact blower that significantly reduces air consumption and working time with instantaneous air blowing. We offer two products: the "IBG1 Series," which achieves over three times peak pressure, and the "IBG2 Series," which realizes a 13% reduction in occupied volume. Please feel free to contact us when you need assistance. 【Features】 ■ Powerful blowing ■ Reduced air consumption ■ Shortened working time *For more details, please download the PDF or feel free to contact us.

• Other work tools

The "JAS-SML/SCL Series" is a speed controller equipped with a secondary scale on the top of the handle, allowing for fine adjustments in increments of 1/4. It reduces the height dimension by a maximum of 20.8mm and improves resolution for precise tuning. It features a scale window that allows for numerical management of flow rates. Please feel free to contact us when you need assistance. 【Features】 ■ Fine adjustments in increments of 1/4 are possible with the secondary scale display - 32 divisions (connection screw diameter: M3, M5, 10-32UNF) - 40 divisions (connection screw diameter: 1/8) ■ Reduces labor hours and setting errors *For more details, please download the PDF or feel free to contact us.

• controller

The "JAS-S Series" is a speed controller equipped with a secondary scale on the top of the handle, allowing for fine adjustments in increments of 1/4. It features a scale window that enables numerical management of flow rate, reducing the height dimension by a maximum of 20.8mm. We offer both right-side and left-side stud position types. Please feel free to contact us if you have any inquiries. 【Features】 ■ Fine adjustments in increments of 1/4 are possible with the secondary scale display - 32 divisions (connection screw diameter: M3, M5, 10-32UNF) - 40 divisions (connection screw diameter: 1/8) ■ Reduces work hours and setting errors ■ Easy identification *For more details, please download the PDF or feel free to contact us.

• controller

The "ZNC-C Series" is a Bernoulli gripper that prevents lateral slipping during workpiece adsorption. Since it adsorbs while blowing air, there is no concern about sucking in powdery substances attached to the workpiece into the equipment or piping. The Coanda effect directs the blown air upwards, which suppresses the blowing away of lightweight workpieces such as trays. 【Features】 ■ Reduces the blowing away of lightweight workpieces and adjacent workpieces ■ Prevents lateral slipping during workpiece adsorption ■ Equipped with Coanda grip *For more details, please download the PDF or feel free to contact us.

• Other work tools

The "EQFS□H/EQY□H Series" is an e-Actuator with an integrated easy control controller. Since the encoder retains position information even during power outages, there is no need for origin return when power is restored. Additionally, because it does not use a battery to maintain position information, there is no need for backup battery management or maintenance replacement. 【Features】 ■ Space-saving ■ Reduced wiring ■ Reduced labor - No programming required - Shortened adjustment time *For more details, please download the PDF or feel free to contact us.

• Actuator

The "AS-FSMA/FSCA Series" is a compact scale-equipped speed controller that allows for inspection and maintenance work to be easily performed from a 360° perspective. It features a scale window that enables numerical management of flow rates. This product allows for fine adjustments due to improved resolution. Please feel free to contact us when you need assistance. 【Features】 ■ Fine settings possible with fractional display, allowing for adjustments every 1/4 - 32 divisions (Body size 1) - 40 divisions (Body size 2) ■ Reduces work hours and setting errors *For more details, please download the PDF or feel free to contact us.

• controller

The "AS-FSA Series" is a compact speed controller with a height dimension reduced by a maximum of 5.4mm and equipped with a scale. By attaching an identification plate, it allows for easy identification during multiple installations and direction of flow identification. It is equipped with a scale window that enables numerical management of flow rate. Please feel free to contact us when you need assistance. 【Features】 ■ Fine settings possible with 1/4 increments using the auxiliary scale display ・32 divisions (Body size 100) ・40 divisions (Body size 200) ■ Reduces work hours and setting errors *For more details, please download the PDF or feel free to contact us.

• controller

We would like to introduce the guided thin cylinder "MGPK Series" that we handle. You can choose the material of the plate from two types: carbon steel and aluminum alloy (for weight reduction). Additionally, since the plug does not protrude from the side, it allows for a more compact width dimension. 【Features】 ■ Volume: Up to 28% reduction ■ Weight: Up to 41% reduction ■ High rigidity: Achieved through optimized shape for compactness and high rigidity *For more details, please download the PDF or feel free to contact us.

• cylinder

The "DAS Series" is a deceleration controller that allows for numerical management of flow rates through a graduated adjustment handle. With two-speed control of the cylinder, it is possible to adjust the deceleration position (cushion timing) and the speed in the second gear (cushion strength). Please feel free to contact us when you need assistance. 【Features】 ■ Cycle time reduction through two-speed control ■ Impact mitigation at stroke ends ■ Numerical management of flow rates with a graduated adjustment handle ■ Up to 76% reduction in occupied space *For more details, please download the PDF or feel free to contact us.

• controller

The "ZP3P-JT Series" is a vacuum pad/bellow type capable of suction conveying film packaging work that undergoes significant deformation, such as liquids and powders. It reduces the deformation of the pad and the sway of the workpiece during suction conveying. The low-rebound bellow alleviates the impact on the workpiece. Please feel free to contact us when you need assistance. 【Features】 ■ Thin film skirt and special rib shape ■ Shortened overall length ■ Pads and attachments are made from materials that comply with FDA (U.S. Food and Drug Administration) standards and food sanitation regulations ■ Blue color adopted *For more details, please download the PDF or feel free to contact us.

• Other work tools

The "ZHV Series" is a vacuum flow capable of supplying compressed air with a maximum blow rate of 6820L/min (ANR) and a maximum vacuum rate of 5270L/min (ANR). It contributes to reducing consumption flow rates in applications requiring blow flow and suction flow. It is compatible with conventional products (ZH-X185) in terms of body mounting, port connection methods, and fluid passage diameter. 【Features】 ■ Weight: Up to 50% reduction (208g reduction) ■ Volume: Up to 50% reduction (17000mm3 reduction) ■ Large passage diameter allows for the suction of chips, dust, etc. ■ Maintenance-free ■ Mounting brackets and dust bags are available *For more details, please download the PDF or feel free to contact us.

• Other work tools

We would like to introduce our longevity-enhancing cylinder, the "MGP-XB24." Thanks to new technology, its durability is more than four times that of existing products (the guide-equipped thin cylinder MGP Series). It also reduces maintenance frequency. 【Specifications (excerpt)】 ■ Operating method: Double-acting ■ Bearing: Sliding bearing ■ Tube inner diameter (mm): 12, 16, 20, 25, 32, 40 ■ Cushion: Rubber cushion on both sides ■ Standard stroke (mm) ・φ12, φ16: 10–150 ・φ20, φ25: 20–200 *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce our lifespan-enhancing cylinder, the 'MGJ-XB24'. Thanks to new technology, its durability is more than four times that of existing products (Mini Guide Rod Cylinder MGJ Series). The specifications and mounting dimensions are the same. 【Specifications (excerpt)】 ■ Operating method: Double-acting ■ Bearing: Sliding bearing ■ Tube inner diameter (mm): 6, 10 ■ Cushion: Rubber cushion ■ Standard stroke (mm) ・φ6: 5, 10, 15 ・φ10: 5, 10, 15, 20 *For more details, please download the PDF or feel free to contact us.

• cylinder

We received an inquiry from a customer who visited our booth at the exhibition regarding the production of in-house equipment. The customer was considering moving towards in-house production of equipment in response to the diversification of automotive parts manufacturing and the increasing frequency of line changes. We aligned the image of the equipment while incorporating sketches and conducted requirement definition at our company. Although the requirements were quite complex, we were able to manufacture the equipment tailored to the customer's needs by effectively handling manufacturers and partner companies. 【Case Overview】 ■Challenge: Considering the production of an XYZ device without a specification document ■Proposal: Conduct requirement definition and produce the XYZ device using IKO *For more details, please download the PDF or feel free to contact us.

• Contract manufacturing

We received an inquiry from a customer who has been a long-time partner with us regarding a set manufacturer, stating that repairs have been delayed due to the worsening availability of Fuji Electric servo motors. We recommend renewing a complete set of multiple control devices, such as servos and sequencers, to improve overall operability and efficiency in terms of availability. The technical staff on the client's side expressed their satisfaction, stating that they were able to proceed with repairs thanks to the seamless renewal. 【Case Overview】 ■Issue: Delays in repairs due to difficulties in obtaining servo motors ■Proposal: Renewal of ejector pin inner diameter processing machine *For more details, please download the PDF or feel free to contact us.

• Other contract services

We received information from a new customer in the automotive industry that they are progressing with the construction of a new factory. Due to the ongoing construction of the new factory, we were unable to confirm the site, and it was necessary to consider appropriate manufacturers and layouts based on the preliminary layout. As a result, we decided on Sakae's product shelves, which had advantages in terms of pricing and support. By intentionally providing proposals from two companies, we believe we were able to help the customer select a suitable manufacturer appropriately. [Case Summary] ■Challenge: Proposal activities for new factory construction ■Proposal: Suggested Sakae's product shelves, which are cost-effective and highly earthquake-resistant *For more details, please download the PDF or feel free to contact us.

• Other contract services

We received a consultation from an existing customer in the chemical industry who is troubled because their current conveyor manufacturer has gone out of business and they can no longer conduct regular inspections. Together with our partner company, we conducted an on-site survey. We undertook inspection and maintenance work on two conveyors and submitted a report. During the inspection, we discovered and pointed out the cause of the contact noise and made improvement proposals. Subsequently, the customer understood the necessity of addressing the issue, and we received an order for the shortening work of part of the conveyor chain. By carrying out the work, we achieved a reduction in the contact noise. [Case Summary] ■ Issue: Due to the manufacturer's closure, regular inspection work on two vertical conveyors (height 11M) can no longer be conducted. ■ Effect: Discovery of the cause of the contact noise and improvement proposals led to a reduction in noise and acquisition of part updates with new conveyors. *For more details, please download the PDF or feel free to contact us.

• Other contract services

We received a consultation from a customer stating, "We have equipment to deliver to a parts manufacturer, but it seems we won't make the deadline, so we would like your assistance." We conducted selection consultations centered around the most challenging indexing device. With the introduction of a vendor knowledgeable about indexing, we held multiple meetings involving the customer, our company, the subcontractor, and the indexing manufacturer, and we proceeded with the work carefully. Thanks to our management of the schedule, we were able to secure additional personnel during the assembly process, which contributed to completing the project on time. [Case Summary] ■ Issue: Consultation on the production of a slat conveyor tempering furnace ■ Proposal: Design and assembly of the conveying conveyor for the slat conveyor tempering furnace *For more details, please download the PDF or feel free to contact us.

• Other contract services

We received a report from an existing customer that an unusual odor was emanating from the vicinity of the bag-making machine, and the set manufacturer consulted with the distributor. Upon receiving the inquiry, we quickly arranged a meeting with the manufacturer to discuss countermeasures. We installed vinyl curtains on all four sides and implemented a solution by hanging sheets in an L-shape to cover the gaps at the corners. As feedback from the customer, while it did not completely eliminate the odor issue, they reported that it was significantly more effective compared to the open state. We provide detailed service for even minor issues like this, so please feel free to contact us if you have any concerns. 【Case Overview】 ■Issue: Unusual odor problem from the bag-making machine ■Proposal: Conducted construction with the manufacturer and distributor present *For more details, please download the PDF or feel free to contact us.

• Other contract services

We received an inquiry about a plastic box welding device from a customer with whom we have had a long-standing business relationship. To build a system that minimizes costs as much as possible, we provided a comprehensive solution from equipment purchase to design and manufacturing, which allowed us to reduce indirect costs through collaboration with our partners. By purchasing the necessary equipment for building dedicated machines, such as conductive machines and FA equipment, in-house, we were able to produce devices that kept costs and delivery times low. [Case Summary] ■ Challenge: Unable to handle excessive orders solely in-house ■ Effect: Delivery of devices with excellent QCD on schedule *For more details, please download the PDF or feel free to contact us.

• Other contract services