藤川伝導機 Product Lineup

No piping or hydraulic work required Control valve and hydraulic source are integrated Reduced oil degradation, lowering the frequency of hydraulic oil replacement Position control stop accuracy: ±5μm or less (sensor measurement) Load fluctuation during constant load control: ±1% or less (sensor measurement) Energy-saving as the motor stops when not in operation No connections other than electrical cables (standard) Compatible with standard products when using Mitsubishi Electric PLC MELSEC-Q Special products available for use with other PLCs

• cylinder

Achieving high environmental performance by using tap water as the working fluid. Widely usable from tap water pressure (approximately 0.3 MPa) to medium pressure of 7 MPa. Cylinder material is made of stainless steel.

• cylinder

Easy to set installation position Compatible with existing products

• switch

The hydraulic cylinder with an automatic tightening mechanism for V packing (NETIS registration number: KK-180043-A) extends the lifespan of the V packing and contributes to reducing running costs.

• cylinder

Detect the position of the cylinder with an accuracy of ±0.5mm Switching output at any position within the measurement range Compatible with standard hydraulic cylinders such as tie rod type F, thin CSR, CHR series, etc. 4-20mA analog output Digital output compatible with IO-Link

• Sensors

Our standard products are configured to be offered at a low cost for relatively small tasks, and they do not meet the "dynamic press machine structural standards" as a press machine.

• Other processing machines

A smart storage solution that maximizes the use of vertical space and prevents picking errors. It enables efficient, accurate, and speedy picking in limited spaces.

• Picking robot system

Our unique structure enables high torque, high efficiency, and low noise. We offer a wide range of sizes (outer diameter Φ26mm to Φ200mm) and reduction ratios (3 to 7), and by combining planetary units, high reduction ratios can also be achieved. The planetary gearbox is structured as a unit, allowing for reduction on the same axis and enabling compact and flexible device design.

• Gearbox

Ideal for dust prevention and wire breakage measures for cable tubes.

• cable

It is a long-span linear drive and a lightweight synchronous transmission and conveyor belt.

• Belts and pulleys

We have renewed the completed pulley StarQuick as "StarQuick CAD" and have started offering the publication of 3D CAD data as a new service. By accessing our company website and selecting your desired specifications, you can download 2D and 3D CAD data.

• Belts and pulleys

e-POWER has a cog or notch shape, which provides excellent flexibility. As a result, it has less power loss due to bending compared to conventional standard V-belts (wrapped belts), leading to energy-saving effects.

• belt

New Orange V-Belt This belt is designed to withstand harsh operating conditions such as large impacts, small pulley diameters, reverse bending, and high-temperature use, compared to general industrial belts. It also excels in heat resistance, bending resistance, and crack resistance compared to general industrial belts. Super AG-X Made with special canvas, it has excellent wear resistance. This belt features high impact resistance due to its high elasticity and short fiber-reinforced rubber. It possesses high durability, making it suitable for use in heavily loaded areas of large agricultural machinery, and is the pinnacle of agricultural machinery belts. Orange Cog The cog type generates little heat and has excellent heat and crack resistance. Its low-edge design, without canvas on the sides, provides a large grip and enables high power transmission. It is thinner and has superior bending resistance compared to general V-belts. Super AG Cog 4 This belt enhances heat and crack resistance compared to the Orange Cog. Super AG Cog 20 Compared to the Orange Cog and Super AG Cog 4, it has improved bending resistance and durability. By using high-hardness chloroprene rubber, its wear resistance is further enhanced compared to the Super AG Cog 4. It also excels in impact resistance due to the use of special aramid core wires.

• belt

The "Tailored Belt" is crafted by selecting the belt type (fabric and color) according to the customer's requests, cutting the dimensions, and welding or sewing various profiles (parts). Furthermore, processes such as hole punching (various buttonholes) and accessory processing (such as metal fasteners) are applied, resembling the tailoring of clothing. These belts are likened to the "quality craftsmanship of tailoring a fine suit," and are carefully and thoughtfully made one by one, delivered to our customers.

• belt

Efficiently change direction in the required space and transport items stably across various scenes, from low to high speeds. Thanks to the technical know-how of Mitsutei Belt, cultivated over many years since its establishment, system settings such as conveyor radius, belt width, and turn angle can be selected at the customer's discretion. We can accommodate integration into existing lines as well as diverse equipment conditions. Our solutions are widely applicable for transporting bulk items, including grains, confectionery, mechanical parts like bolts and nuts, as well as glass and plastic.

• Conveyor

Mitsuboshi Belt responds to the streamlining and efficiency of various industries with advanced conveying technology. Since its founding in 1919, we have been delivering conveyor belts and supporting the essence of "transportation." Leveraging our long-cultivated core technology in rubber, we offer high-quality products that adapt to various environments. Moving forward, Mitsuboshi Belt will continue to respond with the same passion to all those who are passionate about transporting goods.

• belt

"LOGISTAR" provides a comfortable working environment for lines that require acceleration, such as logistics truck terminals, airports, newspaper distribution centers, and e-commerce pickup and delivery centers.

• belt

High rigidity cast nylon Cast nylon HM grade is a resin material that has improved rigidity and heat resistance compared to conventional cast nylon resin materials, thanks to our unique formulation.

• Engineering Plastics

Electrostatic Prevention in Cast Nylon Cast Nylon CDM grade is a resin material that incorporates electrostatic prevention properties and improved heat resistance through our unique formulation, enhancing the traditional cast nylon resin material.

• Engineering Plastics

Ultra-high molecular weight polyethylene SA grade makes soft and safe contact and sliding with counterpart materials, achieving a longer lifespan for components.

• Engineering Plastics

This is a special coating that can stop the hydrolysis of FRP (fiber-reinforced plastic), which has not been possible until now. By simply applying the tank stencol coating to existing FRP water tanks, they can be transformed into completely new tanks. This method extends the lifespan, reduces the generation of industrial waste, and is an environmentally friendly construction method for the 21st century.

• others

"Kurimpy" is an antibacterial polyethylene (PE) material that has passed antibacterial tests based on the antibacterial standard JIS Z 2801 and complies with the Food Sanitation Act. It can be used in warm water without compromising its antibacterial performance.

• Engineering Plastics

Antibacterial and mold-resistant grade of UHMW-PE has arrived. "Clinpy UH" is a super high molecular weight polyethylene material that has passed antibacterial performance tests, mold resistance tests, and the Food Sanitation Act. It has excellent chemical resistance and is also ideal as a sliding component.

• Engineering Plastics

High rigidity polypropylene "MEP-PPF" complies with the Food Sanitation Act, and "Kurinpi PPF" is a polypropylene resin material that has passed antibacterial tests, mold resistance tests, and complies with the Food Sanitation Act.

• Engineering Plastics

Bestar G is a material with excellent sliding and wear resistance, in which our proprietary lubricant is dispersed in a polyacetal copolymer.

• Engineering Plastics

It is a super engineering plastic that combines excellent mechanical properties and dimensional stability. It has a continuous use temperature of 240°C, demonstrating very high heat resistance. It possesses excellent chemical resistance. It is also flame-retardant and radiation-resistant.

• Engineering Plastics

This is a wiper that is installed on sliding parts of machine tools and is used for scraping chips, oil, and other debris, contributing to the maintenance of machining accuracy for machine tools that require high precision processing. It is made of NBR rubber, which has oil resistance and wear resistance, providing excellent durability. The surface of the steel plate is treated with anti-rust processing in compliance with the RoHS directive. We also accept additional processing such as drilling and cutting. The slide-type seal can be molded as a single piece to match the shape of the sliding bed. Since there are no joints in the seal, it offers better sealing performance than standard combination processed products. Installation is made easier, reducing the labor required for mounting on the machine. We also offer solutions to prevent lip curling for slide-type seals.

• Wipers

Rich measurement capabilities for various belts Compatible with a variety of belts such as timing belts, flat belts, V-belts, and V-ribbed belts. Simultaneous display of belt vibration frequency and tension value The two-line display allows you to check frequency and tension values on the same screen. Wide measurement frequency range Can measure a wide frequency range of 10.0 to 999 [Hz] (upper three digits). Short measurement time due to unique high-speed data processing Thanks to the adoption of a high-performance single-chip microcontroller and unique data processing, tension measurement can be performed in a short time (as fast as 0.5 seconds). Memory function equipped Can store data for 10 types of tension measurement conditions and 89 types of unit mass data. Auto power-off function Automatically turns off the power after 5 minutes of inactivity, preventing battery drain due to forgetting to turn off the power switch. Switching between Japanese and English is possible By pressing and holding the "0" and "Enter" keys simultaneously when powering on, you can switch the display between Japanese and English.

• belt

Lightweight Design By using carbon (CFRP) instead of steel for the main body material of the shaft, it is possible to reduce the weight to about half of the original mass. *This comparison is only for the main body part excluding the shaft end. High Strength with Low Deflection When aluminum alloy is used to reduce weight, the strength significantly decreases compared to steel, and deflection may increase, making it unsuitable for high-load applications. In the case of carbon (CFRP), the reduction in strength is minimal, and the increase in deflection is also low, allowing it to be suitable for high-load applications similar to steel. Low Inertia and Eco-Friendly The GD2 (inertia) of carbon (CFRP) shafts is about half that of aluminum alloy and about one-fifth that of steel. This means that energy consumption for rotational motion can be reduced, making it an eco-friendly air shaft that matches the times. Beautiful Appearance The outer surface is wrapped with a lattice-patterned cross, resulting in a beautiful finish. Additionally, CFRP has high corrosion resistance and does not rust.

• Other machine elements

By incorporating a ball unit into the clean air shaft, it becomes the optimal shaft (shaft with rollers) for use in clean rooms. It uses a ball transfer that can rotate in any direction. The core can be rotated in the circumferential direction, allowing for adjustment of the chuck position. Cleanliness and maintainability have been improved. The load capacity has doubled.

• Other machine elements

Compared to conventional models, this compact design reduces the body length by 46mm for 3 inches and 88mm for 6 inches, while still being able to transmit a large torque. Tube replacement can be easily done on-site without removing the body from the machinery. The standard chucks for 3 inches and 6 inches are compatible with cores of all materials.

• shaft

"Can be used anywhere," "easily," "reliably," "gentle on products." Roll products can be handled. No air supply needed due to the mechanical locking system! No air source required at the usage location! Locking can be easily done with lever operation! Since it uses a mechanical locking system, there is no worry about product drops due to air shortages or leaks! Locks on the inner surface of the paper tube, so it won't damage the products!

• roller
• Other machine elements

This is an AIREX mechanical shaft (screw type) that can be used in a vacuum environment. It is optimal as a winding and feeding shaft for solar panels and semiconductor manufacturing equipment. It can be used in ultra-high vacuum areas down to 10^-6 Pa. We use carefully selected materials. The components are made from materials with low gas emission. Metals include SUS303, SUS304, SUS440C, and A2017. Resins include Vespearl SP-1, Ketron PEEK, and Viton fluorine rubber. The lubricant is vacuum grease (Barrierta SUPER IS/V, NOK). It has a structure that suppresses dust generation. To minimize contact dust generation during core attachment and detachment, a roller unit is embedded in the outer diameter of the body. During the expansion and contraction of the lugs, it suppresses dust generation from inside the shaft while preventing component seizure by ensuring that the sliding components are a combination of metal and resin. Residual foreign substances from the components are removed. Before assembly, all components are degreased, cleaned with ultrasonic cleaning, and dried to remove moisture. Assembly is carried out in a clean booth with the utmost care to prevent the attachment of oils, dust, and other contaminants.

• roller

It generates little dust and can be used in a Class 1000 cleanroom. * The dust generation of the shaft body with a particle diameter of 0.5μm or larger has been confirmed to be below 100 particles/ft³. You can chuck it at any position of the lag without selecting the width of the core. Tube replacement and cleaning can be easily done on-site. Tube replacement is completed in 5 minutes per tube.

• roller

It can be used in a Class 1000 cleanroom. It is compatible with all standard types of AIREX air shafts. To reduce dust generation caused by core contact, the head cap and lugs are made of resin components. In a Class 1000 cleanroom, the lugs have been expanded and contracted, confirming that the dust generation of particles with a diameter of 0.5 μm or more is below 100 particles/ft³.

• shaft

The "TU" is a compact and slim positioning table that features a sliding table placed inside a U-shaped track rail. By adopting the U-shaped track rail, the rigidity against moments and torsion is significantly improved. It is also possible to use the track rail as a structural component of machines and devices, expanding design flexibility. With a wide variety of sizes and a rich selection of options, you can easily configure the appropriate positioning table for your needs by specifying the required functions and performance by part number. 【Features】 ■ A compact and slim positioning table that employs a newly designed U-shaped track rail ■ Suitable table specifications can be selected from a wide range of options ■ The sliding table has a high-precision, high-rigidity integrated structure *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "TE B" is a lightweight, low-profile, and compact positioning table that uses high-strength aluminum alloy for its main components and features a slide table positioned inside a U-shaped bed. The overall mass of the table is reduced to about 40% of the TU series. The profile heights are low, with 26mm for the TE50B, 33mm for the TE60B, and 46mm for the TE86B. Various sensors can be directly mounted on the sensor mounting grooves of the bed, contributing to space-saving. By reducing the number of parts and optimizing part shapes, it achieves excellent cost performance. 【Features】 ■ Lightweight, low-profile, and high-precision positioning table ■ Table specifications can be selected according to application ■ Excellent cost performance *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "TSLH M/CTLH M" is a high-precision and high-rigidity positioning table composed of a cast iron slide table and bed with high rigidity and vibration damping properties. By incorporating two sets of linear ways in parallel into the precision-ground cast iron slide table and bed, and combining them with precision ball screws, it achieves high travel accuracy and precise positioning. With two sets of linear ways optimally arranged on a high-rigidity bed, it has a large load capacity and a structure that is strong against moments and combined loads. 【Features】 ■ High-precision and high-rigidity positioning table ■ High travel accuracy and positioning precision ■ High rigidity and large load capacity *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "TSL M" is a lightweight, long-stroke positioning table composed of a slide table and bed made from high-strength aluminum alloy. It is available in four sizes, with table widths ranging from 90mm to 220mm. The XY bracket allows for easy multi-axis configurations. Additionally, by incorporating two sets of linear ways in parallel and combining them with precision ball screws, it achieves high running accuracy and precise positioning. 【Features】 ■ Lightweight, long-stroke positioning table ■ Stable high running accuracy and positioning precision ■ Multi-axis system configuration possible with XY bracket *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The flat cage "FT/FTW A" features a simple structure that combines high-precision rollers and retainers, providing a low-profile linear motion guide with the roller diameter equal to the cross-sectional height. Since the rollers are guided by a precisely machined retainer, friction resistance is low, allowing for stable linear motion without stick-slip. Additionally, the retainer made of synthetic resin is suitable for applications where acoustics are important. 【Features】 ■ Low profile ■ High rated load ■ Easy to implement rolling guidance ■ Smooth operation with low noise ■ Easy to handle *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "IKO Ball Spline" is a linear motion guide device where the outer cylinder moves in a straight line along the spline shaft. Due to its structure where steel balls roll along the spline grooves, it can withstand not only radial loads but also rotational torque. It is suitable for mechanisms that require linear motion while transmitting torque. We offer the "C Groove Ball Spline G MAG," made of stainless steel with excellent corrosion resistance, and the "Ball Spline G LSAG," which features a compact size due to its simple structure. 【Features】 ■ High rigidity despite its compact size ■ High precision and accurate positioning ■ Low friction for smooth operation ■ Combines high-speed durability with maintenance-free performance *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "Linear Bushing G LMG" features a structure where steel balls are arranged in two rows, making contact with the raceway grooves provided on the shaft, resulting in high rigidity and increased load capacity. There are two types of shafts with raceway grooves: solid shafts and hollow shafts, with the hollow shafts being suitable for applications such as piping, wiring, and air venting. Additionally, we offer the "LM" for easy rolling guidance and the compactly designed "LMS." 【Features】 ■ High load capacity ■ Solid shafts and hollow shafts ■ Dimensionally compatible with Linear Bushing LM *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "ST" is a stroke rotary bushing that enables axial reciprocating linear motion simultaneously with rotational motion, achieved through a combination of an outer cylinder with a cylindrical trajectory surface and steel balls incorporated into a holder. By integrating high-precision steel balls into a precisely finished outer cylinder, it realizes minimal rolling motion resistance and extremely smooth rotational and reciprocating movements. Additionally, we offer the ultra-precision miniature stroke rotary bushing "STSI" and the high-performance ball guide "BG" with excellent high-speed operation capabilities. 【Features】 ■ Rotation and linear motion ■ Minimal rolling motion resistance ■ Low inertial force ■ Abundant variations *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce our "Standard Precision Ball Screws" that we handle. Based on screw gauge manufacturing technology and under strict quality control with abundant screw processing techniques, we specialize in small ball screws with ISSOKU's "GPR/GTR Series," and we offer a wide range of products from ultra-precision ball screws to rolled screws with KURODA's "GG Series," which is based on gauge technology. Additionally, we also provide "Slide Shafts" that can be used in combination with linear bushings and stroke rotary bushings. 【Product Lineup】 ■GPR Series ■GTR Series ■GG Series ■Slide Shaft *For more details, please download the PDF or feel free to contact us.

• Screw
• Other machine elements

The "BWU" is a compact and simple structure finite stroke type high rigidity precision ball slide that incorporates steel balls and retainers between a monolithic table and bed. Due to its two-row four-point contact structure, it achieves stable precision and rigidity even in applications where variable loads and combined loads are applied. Additionally, we offer a wide range of products including the finite wired motion type "BSP," the rack and pinion integrated type "BSPG," and the lightweight linear guide unit "BSU A." 【Features】 ■ Simple structure finite linear guide ■ High precision ■ Smooth operation ■ Made of stainless steel with excellent corrosion resistance *For more details, please download the PDF or feel free to contact us.

• Other machine elements