未来舎 Product Lineup

The high-performance sine wave inverter "FI-S125D" is a directly imported inverter under an OEM contract from the United States. It is compact and lightweight, with a range of models available from 12V to 108V input, and there are no restrictions on the devices that can be used. For more details, please download the catalog.

• inverter

The battery charger "CH-1212GFP" is a compact and lightweight fully automatic battery charger that requires no maintenance. Its noise characteristics are also very excellent, and it hardly causes any noise interference even when most electronic devices are placed nearby. The GFP series is PSE compliant. For more details, please download the catalog.

• Charger

The DC-DC converter "DC-2440SBXF" is a compact and lightweight on-board charger that has significantly advanced from the conventional SBXE type. It comes with a remote display unit that digitally shows voltage, current, and set voltage, improving visibility. For more details, please download the catalog.

• converter

The solar battery charge and discharge controller "PV-1212D1A" allows you to check the day's power generation via an LCD display, and monitor the battery status with a three-color LED. Since low voltage disconnection and reconnection can be set using a push switch, it enables the construction of an advanced control system. For more details, please download the catalog.

• controller

The solar battery charge and discharge controller "PV-1206A" is a compact solar controller measuring approximately 46x90x27 mm, which adopts a constant voltage charging method using the latest PWM technology. It features a nighttime lighting load function, so the load output turns off when the solar panel voltage is above 5V and is output when it is below 3.5V. The casing is made of plastic and is sealed, with an IP rating of IP54. For more details, please download the catalog.

• controller

The high-performance sine wave inverter "FI-SU1503" automatically switches to inverter power (battery) when the supply from the AC power source is interrupted, allowing for continuous use. Once the AC power is restored, it switches back from inverter power to AC power. For more details, please download the catalog.

• inverter

The high-performance sine wave inverter "FI-S2003" is an exceptionally high-performance sine wave inverter that excels in improving surge current resistance for transformers, neon lights, and power applications. It is ideal for large electric drills, small microwave ovens, floodlights, electric heaters, mobile sales vehicles, and outdoor electrical work. For more details, please download the catalog.

• inverter

The battery charger "CH-1225GFP" is a compact and lightweight fully automatic battery charger that requires no maintenance. Its noise characteristics are also excellent, and it hardly causes any noise interference even when most electronic devices are placed nearby. The GFP series is PSE compliant. For more details, please download the catalog.

• Charger

The battery charger "CH-1225GFP" is a compact and lightweight fully automatic battery charger that requires no maintenance. Its noise characteristics are also very excellent, and it hardly causes any noise interference even when most electronic devices are placed nearby. The GFP series is PSE compliant. For more details, please download the catalog.

• Charger

The solar battery charge and discharge controller "PV-1230D1AB" allows you to check the day's power generation via an LCD display and monitor the battery status with a three-color LED. Since low voltage disconnection and reconnection can be set using a push switch, it enables the construction of an advanced control system. For more details, please download the catalog.

• controller

The solar battery charge and discharge controller "PV-2412D1AB" allows you to check the day's power generation via an LCD display and monitor the battery status with a three-color LED. Since low voltage disconnection and reconnection can be set using a push switch, it enables the construction of an advanced control system. For more details, please download the catalog.

• controller

○External control terminal: Remote control via engine key linkage or external contact switch ○Ultra-low standby current: Approximately 80mA, with very low power consumption during standby, making it suitable for automotive use. ○High efficiency: Particularly necessary to convert electricity efficiently in valuable batteries, achieving approximately 90% efficiency. ○Dual output: Equipped with multiple terminals for maximum 40A and 15A. (However, the total current must be used below 40A) ○Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again) ○Low noise: Significantly lower noise than conventional switching converters, allowing use without worrying about noise, similar to regular power supplies. ○Automatic cooling fan: The fan starts when the chassis temperature exceeds a certain level and automatically stops when the temperature falls below a certain level. ○Slim design: Despite high current, it is compact and particularly slim. ○Selected components: Uses high-performance components such as metal film resistors and glass-epoxy boards, selected for industrial use only.

• inverter

You can remotely turn the FI-S1500GRS ON/OFF.

• inverter

Introducing five essential types of "Solar Charge Controller" needed for generating electricity using solar panels! ● 'D1A Series' → A multifunctional controller with an LCD display, night light mode, various setting functions, etc. ● 'PV-1212C1A' → Some functions removed from the D1A series, but still sufficiently equipped with necessary features at a lower price. ● 'PV-1206A' → Compact yet equipped with essential functions, and the plastic housing is sealed for high waterproof and dustproof performance. *For more details, please refer to the catalog or feel free to contact us.*

• controller
• Solar power generator
• Charger

The solar battery charge and discharge controller "PV-1212D1A" is a budget version with some functions removed from the D1A series, but it is equipped with the necessary features for a solar controller. For more details, please download the catalog.

• controller

It is a high-function remote control with LED display that allows you to turn the inverter ON/OFF from a distance without using the POWER SWITCH on the inverter itself, and check various statuses.

• inverter

This is a high-function remote control with an LED display that allows you to turn the inverter ON/OFF from a distance without using the POWER SWITCH on the inverter itself, and to check various statuses. 【Features】 ■ Buzzer sound 〇 Engine key operation terminal ■ Input voltage display 〇 Output power display ■ Over-voltage alarm lamp 〇 Under-voltage alarm lamp ■ Over-temperature alarm lamp 〇 Overload alarm lamp ■ Power-saving mode display ■ The included remote control cable is approximately 7m long.

• inverter

The high-performance sine wave inverter "FI-SU603" automatically switches to inverter power (battery) when the supply from the AC power source is interrupted, allowing for continuous use. Once the AC power is restored, it switches back from inverter power to AC power. For more details, please download the catalog.

• inverter

The high-performance sine wave inverter "FI-SU603" automatically switches to inverter power (battery) when the supply from the AC power source is interrupted, allowing for continuous use. Once the AC power is restored, it switches back from inverter power to AC power. For more details, please download the catalog.

• inverter

The high-performance sine wave inverter "FI-SU2503" automatically switches to inverter power (battery) when the supply from the AC power source is interrupted, allowing for continuous use. Once the AC power is restored, it switches back from inverter power to AC power. For more details, please download the catalog.

• inverter

Compact and lightweight, easy to carry, equipped with AC100V output as well as a USB output terminal. Comes with a cable with a cigarette plug for immediate use.

• inverter

○Ultra-low standby current: Approximately 150mA, with very low power consumption during standby, making it suitable for automotive use. ○High efficiency: Especially important for valuable batteries, it achieves approximately 90% efficiency in converting electricity. ○Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again.) ○Low noise: Significantly lower noise than conventional switching converters, allowing for use similar to regular power supplies without worrying about noise. ○Slim design: Despite high current, it is compact and particularly thin. ○Selected components: Uses high-performance components such as metal film resistors and glass-epoxy substrates, specifically selected for industrial use.

• inverter

- Ultra-low standby current: Approximately 40mA, with very low power consumption in standby mode, making it suitable for automotive use. - High efficiency: Particularly efficient in converting electricity when using valuable batteries, achieving about 90% efficiency. - Overload electronic protection: Automatically cuts off output when overloaded. (To restore, the power switch must be turned off and on again.) - Low noise: Significantly lower noise compared to conventional switching converters, allowing for use without worrying about noise, just like a regular power supply. - Slim design: Despite high current, it is compact and particularly thin.

• inverter

- External control terminals: Remote control via engine key linkage or external contact switch. - High efficiency: It is particularly necessary to convert electricity efficiently in the case of valuable batteries, achieving approximately 90% efficiency. - Dual output: Equipped with multiple terminals for a maximum of 40A and 1A. (However, the total current should be used below 40A.) - Overload electronic protection: Automatically cuts off output when overloaded. (To restore, the power switch must be turned back on.) - Low noise: Significantly lower noise than conventional switching converters, allowing use without worrying about noise, similar to a regular power supply. - Automatic cooling fan: The fan starts when the case temperature exceeds a certain level and automatically stops when it falls below a certain temperature. - Slim design: Despite high current, it is compact and particularly slim. - Selected components: Uses high-performance components such as metal film resistors and glass-epoxy substrates, selected for industrial use only.

• inverter

The battery charger "CH-1235AS" has the following features: 1. Large capacity with a maximum current of 35A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency and high reliability 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Optional remote control for turning output ON/OFF, changing FAN mode, and adjusting charging voltage based on temperature sensor readings

• Charger

The battery charger "CH-1225AR" has the following features: 1. Maximum current of 25A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency, high reliability, and high functionality 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Remote ON/OFF output and FAN mode change via optional remote control, with charging voltage correction by temperature sensor 7. Charging while using the load is possible through a short circuit of the main unit pins, forcing it into a float charging state, which minimizes the risk of overcharging.

• Charger

The battery charger "CH-2415AR" has the following features: 1. Maximum current of 12.5A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency, high reliability, and high functionality 4. Two types of bulk charging voltage and two types of float charging voltage can be set individually 5. FAN speed control mode 6. Remote ON/OFF output and FAN mode change via optional remote control, and charging voltage correction using a temperature sensor 7. Charging while using a load is possible due to the main unit pin short, forcing it into a float charging state, which minimizes the risk of overcharging.

• Charger

The battery charger "CH-1250AR" has the following features: 1. Maximum current of 50A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency, high reliability, and high functionality 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Remote ON/OFF output and FAN mode change via optional remote control, with charging voltage correction based on temperature sensor 7. Charging while using the load is possible due to the main body pin short, forcing it into a float charging state, which minimizes the risk of overcharging.

• Charger

The battery charger "CH-1280AR" has the following features: 1. Maximum current of 80A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency, high reliability, and high functionality 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Optional remote control for turning output ON/OFF from a distance, changing FAN mode, and correcting charging voltage using a temperature sensor 7. Charging while using a load is possible due to the shorting of main unit pins, forcing it into a float charging state, which minimizes the risk of overcharging.

• Charger

The battery charger "CH-2425AR" has the following features: 1. Maximum current of 25A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency, high reliability, and high functionality 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Remote ON/OFF output and FAN mode change via optional remote control, with charging voltage correction using a temperature sensor 7. Charging while using a load is possible due to a short circuit in the main unit pins, forcing it into a float charging state, which minimizes the risk of overcharging.

• Charger

The battery charger "CH-1205" is a compact and lightweight fully automatic battery charger that requires no maintenance. It automatically recovers from stops due to reverse connection protection, over-temperature protection, and overload protection. For more details, please download the catalog.

• Charger

You can customize the inverter with remote power ON/OFF, various displays, and a variety of setting options.

• inverter