レックス List of Products and Services

By synchronizing and synthesizing position data from GPS and depth data from an acoustic depth sounder, we display the ship's track and depth profile in real-time on a computer screen while also recording the data. This allows for measurements that are not affected by tidal levels (except in the case of using differential GPS).

The GPS1200+ antenna can simultaneously receive signals from all satellites of GPS, GLONASS, Galileo, and Compass on 120 channels. The receiver is buoyant, resistant to drops and impacts, and can operate in harsh conditions such as rain, dust, sand, and snow.

***Features*** - Measurement (General): It can display and record GPS data and depth sounder data, making it useful for tasks such as depth measurement, positioning, and flagging. - Measurement (Survey Line): Used during depth measurement tasks along planned survey lines. Pre-registered survey lines are displayed on the screen, allowing for efficient work by navigating the survey vessel along the displayed survey line. - Reverse Shooting (Guidance): The relative position to a target point, for which coordinates have been pre-registered, is displayed on the screen. By following the screen's instructions while operating the vessel, you can reach the target point. - Record Reproduction: Past recorded data can be graphically displayed just like at the time of measurement. Additionally, in this mode, it is possible to change the display method for antenna height and depth sounder data. - GPS Automatic Setting (Base Station / Mobile Station): GPS settings for use during surveying can be configured from a computer. It is not necessary to have a dedicated controller or program, nor is it required to have extensive knowledge of GPS. - Survey Line Registration: Data for planned survey lines can be registered using X and Y coordinates, and the survey line can be displayed on the screen. It is also possible to swap the starting and ending points. - Reverse Shooting Point Registration: Registers the X and Y coordinates of the reverse shooting point.

The performance of the recording section, such as gradation display, step-type paper feed speed, and scale, is that of a standard acoustic depth sounder.

This is a system that synchronizes the measurement values of X/Y/Z from real-time kinematic (RTK) GPS for precise measurements with depth measurements from an ultrasonic depth sounder, allowing for continuous measurements at the moving observation point in real-time without post-processing analysis, and records and displays three-dimensional data on devices such as laptops.

***Features*** - A stationary mechanism that combines a thermal head recording section with thermal recording paper. There are no fluctuations in recording due to inertia, and synchronization errors do not occur. - Low power consumption design. It can operate continuously for 6 hours on a built-in battery. It can also use an automotive battery. - Automatic printing on recording paper. It can print time, water depth values, range, sound speed correction values, scale, and more. - Clock function. It prints time marks regularly and can output externally. - Compact design that is small and lightweight. Weighing only 5 kg. Even with the battery attached, it is lightweight at 7 kg. - Large LCD display. It vividly displays time, water depth values, range, sound speed correction values, draft values, and depth values. - Automatic shift/manual shift. In automatic shift mode, the shift range is printed, and the width of the recording paper is not noticeable. - Sound speed correction. If the sound speed correction for the set depth during the vertical check is registered, it can be automatically corrected.

You can adjust it with the feeling of looking at a bubble level while watching the monitor screen. This fundamentally improves the conventional leveling work and expands the measurement range (±0.3°).

We are running a campaign for the rental of various measuring instruments, including a "standard sound level meter" that allows for long-term data recording on CF cards, an "air respirator" that can record continuously for extended periods, and a "wireless vehicle weight scale." If you are considering renting measuring equipment, please feel free to contact us by phone to discuss your purpose and intended use, and our experienced staff will respond promptly to any details.

This is an introduction to the energy compensation type scintillation survey meter TCS-172B (Hitachi Aloka Medical) for measuring ambient dose rate. It allows switching between dose equivalent rate (μSv/h) and counting rate (s^-1 = cps). Furthermore, the dose equivalent rate mode is suitable for measuring environmental gamma radiation, while the counting rate mode can also be used for iodine measurements in emergencies. For more details, please contact us or download the catalog.

PWM Light-Compatible Illuminance Meter T-10A (Konica Minolta Optics, formerly Konica Minolta Sensing): Introducing the illuminance meter, a photometer and infrared temperature measuring device. The light receiving unit is detachable and can be connected to the main unit with a commercially available LAN cable (standard configuration includes a 3m LAN cable). For measuring general lighting sources and white light-emitting diodes used for illumination, an illuminance meter compliant with JIS Class AA is required. For more details, please contact us or download the catalog.

This is a simple and easy-to-use model specialized for particle measurement necessary for cleanroom cleanliness measurement. By designing the housing in a streamlined shape, it has become possible to obtain reliable measurement results without obstructing the flow of sample air. Data can be recorded on the included SD card. For more details, please contact us or download the catalog.

The "ELT-400 type magnetic field exposure level tester" is an isotropic magnetic field measuring device used to evaluate low-frequency magnetic field strength in general or workplace environments. It allows waveform analysis on an oscilloscope through output from external output terminals. Additionally, it can evaluate exposure for any waveform. For more details, please contact us or download the catalog.

Rex offers the latest global technology information to all customers who require measuring instruments. We have a variety of measuring devices tailored to different scenarios such as concrete diagnostics, radiation measurement, and clean rooms, so please contact us for more details or download the catalog.

This is a portable liquid flow meter equipped with a large LCD screen that supports easy-to-use Japanese display. It utilizes a correlation reception method to accommodate fluids that have been difficult to measure, such as two-phase flows containing solids and bubbles, as well as hydrocarbon liquids. It also features a comprehensive self-diagnostic function that helps improve the efficiency of measurement tasks. Additionally, flow data can be transferred to a computer for editing in spreadsheet software. (Compatible with Windows XP and earlier.) For more details, please contact us or download the catalog.

Wireless remote display with stand. It features the largest LCD in its class, making it easy to read both outdoors and indoors. It is available in three types of hanging scales with capacities of 1,000, 3,000, and 5,000 kg. The use of aluminum die-cast case 8 achieves a compact and lightweight design. A waterproof version is also available. It uses an environmentally friendly lithium-ion rechargeable battery. ● For more details, please download the catalog or contact us.

The non-prism total station CX-105F can measure distances from 30cm to 500m, which is the shortest range in the non-prism industry. Its ultra-small diameter spot measurement allows for highly accurate direct measurements of wall corners, shallow-angled manholes on the street, power lines, and it is overwhelmingly advantageous for measurements through grid-like or mesh fences. The distance measuring light is a visible laser with an ultra-small diameter spot, and the laser pointer shares the same light source and optical axis as the distance measuring light. For more details, please contact us.

The TruPulse 360 is a next-generation laser measuring device that can measure "straight distance," "horizontal distance," "vertical distance," "slope angle," "height of the target," and "azimuth" with high precision and simple operation. With simple button operations, it allows for three-dimensional distance measurements. The slope sensor and azimuth compass are always active, enabling instant calculations of not only the "distance" to distant targets but also their "height," "spacing," "elevation difference," and "direction." For more details, please contact us.

The Leica 3D Disto is a laser distance meter operated with a handheld controller and remote controller. It allows for measurements in large spaces, special shapes, sloped walls, areas with fine decorations, and hard-to-reach places. The body is designed to be sturdy and slip-resistant, allowing it to be placed directly on the floor or mounted on a tripod for use. By measuring distance and angles, it enables accurate location information of measurement points, as well as photographing the measured objects and automatic scanning. For more details, please contact us.

MONMOS NET1AX is a three-dimensional measurement system that has added features to automate the initial data acquisition process and enable high-speed automatic measurement. Additionally, it has improved performance through the latest technology, including high-precision automatic alignment with prisms and sheets, long-distance non-prism measurement (NET1AX), and enhanced motor rotation speed. For more details, please contact us.

The GB-3 is equipped with hybrid positioning technology that can receive GPS, GLONASS, and GALILEO (GNSS). By using GNSS in combination, the number of available satellites increases. This leads to stable accuracy and enables positioning even in areas with poor overhead visibility, thereby extending operational time and improving productivity. The GB-3 is also widely utilized as various sensors. Its compact body, which has been streamlined to include only the necessary functions, allows for installation on various mobile units. It is particularly being used in the field of IT civil engineering, where it is mounted on many vibratory rollers as a compaction management system. For more details, please contact us or refer to the catalog.

The measurement of true north with the Auto Gyro Station GYRO 3X II does not require the relocation of reference points through traverse surveying or solar observations. It is highly portable and allows for efficient true north measurements. Compared to other observation methods, it is not constrained by the surrounding environment, enabling high-precision measurements anytime and anywhere. The mass of the gyro unit is 4 kg, and a single person can carry the entire set of equipment, including the total station and tripod. Additionally, since the tripod used is for the total station, it can be set up quickly without requiring special skills. Furthermore, even with preliminary and main measurements, the measurement is completed in 19 minutes, achieving a significant reduction in time compared to conventional manual devices. For more details, please contact us or refer to the catalog.

The Non-Prism Total Station ES-105F features a new type of EDM, a robust body, a thoroughly user-friendly design, LongLink data communication, a reliable angle measurement system, and the world's longest continuous usage time of 36 hours. Its ultra-small diameter spot measurement allows for high-precision direct measurements of wall corners, shallow-angled manholes on the road, power lines, and is overwhelmingly advantageous for measurements through grid-like or mesh fences. For more details, please contact us.

The LASER RANGE series is a rare product that achieves unprecedented long-distance laser measurement globally. Among the LASER RANGE series, the LRB6000CI is equipped with a high-end ultra-fast clock board that has a detection capability of up to 6000 meters. It is ideal for applications such as civil engineering surveys (road, bridge, dam construction), surveying projects for various government agencies, ports, forestry, urban area surveys, real estate, geoscience, large construction sites, urban development, security planning, disaster prevention, and golf course design. For more details, please contact us.

The RL-200 2S rotating laser makes slope setting easy and can be installed simply, providing a robust and high-precision rotating laser. It enables slope construction with world-class accuracy. 【Features】 ○ Achieves a uniform finished surface with excellent performance ○ Reduces construction errors → Achieves horizontal accuracy of ±7” ○ Operating range of 1100m in diameter (when using level sensor LS-80L) ○ Supports steep slopes and compound slopes ○ Operates for 100 hours on 4 alkaline batteries Please contact us for more details.

The Auto Level AT-B2 can be used in sudden rain or harsh fields due to its excellent waterproof performance. The speed of the focusing screw automatically switches between two levels (coarse and fine) depending on how quickly it is turned, allowing for quick focusing. 【Features】 ○ Automatic correction mechanism for quick and reliable stopping ○ Short focusing distance advantageous for narrow sites ○ Quick focusing with two-speed settings ○ Full-circle fine adjustment with clamp pressure ○ IPX6 rated with excellent waterproof performance, making it suitable for sudden rain and harsh environments For more details, please contact us.

The Hangnavi LN-100 is a surveying device that allows anyone to quickly and easily drive stakes by themselves. It provides reliable and prompt support to customers based on the product information accumulated on the server. Simply turning on the power will initiate automatic leveling, eliminating the need for cumbersome screw-type leveling tasks. ★ For more details, please check the product page from the link below【Related Links】. ★ You can also obtain the comprehensive catalog (electronic) from the "PDF Download" materials. ★ You can request a quote through the "Contact Us" section. Feel free to reach out.

The PLANIX5000 is an innovative shape measuring device that detects the coordinates of measurement shapes through a completely new mechanism and built-in computer, instantly measuring area and line length for digital display. For linear shapes, the point mode function allows for simultaneous measurement of area and line length by simply plotting each vertex, while for curved shapes, the stream mode function enables simultaneous calculation of area and line length. Additionally, it is equipped with numerous advanced features such as arithmetic calculation functions, memory functions, and high precision with a line resolution of 0.05mm. 【Features】 ○ Simultaneous measurement of area and line length ○ Point mode that changes the measurement process ○ Smooth stream mode for curved shapes For more details, please contact us.

If you need to rent measuring equipment, you can use it for the necessary period when you need it. Additionally, our company not only provides rentals but also offers comprehensive support from selecting the right model for our customers to after-sales service, so you can use our services with peace of mind. We are currently offering a free catalog! For more details, please download it or contact us.

This is a comprehensive catalog of rental measuring instruments featuring over 1,000 models. With a substantial total of 356 pages! There are four key points to help you find the measuring instruments you need. ■ Convenient comparison tables for model selection ■ Special features on measuring instruments by usage scenario ■ A wide range of system-compatible products ■ Calibration and repair services are also available Right now, we are offering the comprehensive catalog for free! << If you are interested, please apply through the contact form >>

By combining with the LR200 light receiver, we have achieved a high sensitivity range of ±0.5mm or ±2mm with a diameter of 500m. ★ For more details, please check the product page from the link below. ★ You can also obtain the comprehensive catalog (electronic) from the "PDF Download" materials. ★ You can request a quote from the "Contact Us" section. Please feel free to do so.

A compact model that condenses advanced features into a small and lightweight body. It comes standard with a wireless keyboard using infrared communication, equipped with 37 necessary keys, including full alphabet keys for numerical and text input, as well as soft keys and measurement keys. The RED-tech II EDM is an evolved version of the RED-tech EDM, which has brought innovative advancements to the optical distance meter. It maintains an unparalleled measurement range starting from just 30 cm (from the center of the machine) while achieving an upgrade. 【Features】 ○ Phase Difference Measurement → A phase difference measurement method that is overwhelmingly superior in terms of accuracy compared to pulse measurement methods. ○ Digital Signal Processing → Simultaneously samples three types of distance measurement signals and calculates distance using software. ○ Outstanding Precision Optical System → Light is emitted from the center of the objective lens and received at the periphery, thoroughly refining the traditional Sokkia optical system. For more details, please contact us or download the catalog.

The gradient setting range supports steep slopes with an X-axis of ±10% and a Y-axis of -5 to +25%. It has a working range of a diameter of 800m and operates for 85 hours over long distances and extended periods. High reproducibility is achieved through a closed-loop structure that can reproduce the same construction surface repeatedly. 【Features】 ○ Gradient setting range that accommodates steep slopes ○ Expanded working range ○ Achieves long operation time of 85 hours ○ Reliable reproducibility utilizing total station technology ○ Compact remote control RC-400 included as standard For more details, please contact us or download the catalog.

The high-precision total station TCA1100, proudly presented by Leica Geosystems, is the top model designed for measurement tasks that require accuracy, such as tunnel displacement measurement and shield machine control. The TCA1100 boasts unparalleled precision with an angular measurement accuracy of 3 seconds and a distance measurement accuracy of 2mm + 2ppm, and its capabilities have been recognized in large-scale projects worldwide. The built-in Automatic Target Recognition (ATR) function automatically identifies prisms and accurately sights them, eliminating human factors such as inexperience and mistakes. Additionally, the motor-driven function allows for pointing to any desired point and is suitable for capturing temporal changes like displacement measurement through continuous measurement. 【Features】 ○ Angular measurement accuracy of 3 seconds; distance measurement accuracy of 2mm + 2ppm ○ A fusion of the highest precision and ease of use ○ Automatic sighting function that supports high-precision measurement For more details, please contact us or download the catalog.

The digital level DiNi12 is a first-class electronic level certified by the Geospatial Information Authority of Japan. It connects to the Tamaya data collector and captures data in accordance with the agency's operational regulations. Zeiss's top technology accurately reads the barcode scale (precision inverter scale LD-13). It features a convenient handle for portability. When connected to the Tamaya data collector LC-2000LZ, it efficiently captures data according to the agency's operational regulations. The measurement time is fast at 3 seconds. 【Features】 - Measurements can be taken in dark places using a flashlight on the scale. - Battery life allows for continuous measurements for up to 10 hours. - The average value can be automatically calculated from multiple measurements. - When connected to the Tamaya data collector LC-2000LZ, data can be captured simply by focusing on the scale. - Data can also be saved to a computer. For more details, please contact us or download the catalog.

The Laser Theodolite DT-110LF achieves the same waterproofing (JIS Grade 6) and simple operability as the conventional DT series by incorporating a visible light semiconductor laser into the digital theodolite. 【Features】 ○ Waterproof design JIS water-resistant type (Protection grade: 6) → Effectively guards against dust and sudden heavy rain during work. ○ Compatible with dry batteries → No need to prepare an AC power source, allowing work to be done anywhere. ○ Compact and lightweight → Further compact and lightweight by incorporating a visible semiconductor laser internally. ○ Telescope can rotate 360° → The telescope can rotate fully, making zenith and nadir observations easy. ○ Uses semiconductor laser → The use of a semiconductor laser eliminates the need for a laser tube, making maintenance simple. → The laser spot diameter remains small even at long distances, allowing for quick positioning in construction work and bridge projects. For more details, please contact us or download the catalog.

The indirect measurement using a 360° tilt sensor is equipped with functions that are completely different from traditional Pythagorean functions. With simple operation, it has become possible to measure various "heights." It is chosen as the optimal tool for measuring "heights" in dangerous locations for "horizontal distance measurement," architectural design, renovation estimates, the height of high signs, forest management, and more. 【Features】 ○ Equipped with a color finder (4x magnification) that displays the target with 1 to 4 times zoom. ○ Built-in tilt sensor allows for slope measurement up to 360°. ○ Capable of measuring building heights and roof slopes with five types of indirect measurements. ○ Equipped with three types of Pythagorean functions, allowing measurement of building width and height from a distance using measurements from two or three points. ○ Bluetooth functionality enables wireless data transfer to a computer. For more details, please contact us or download the catalog.

The automatic tracking total station TCA1800 enables high-precision measurements for displacement measurement of tunnels, landslides, dams, and bridges, as well as control of large construction machinery, thanks to its automatic sighting function. It boasts an angle measurement accuracy of 1 second and a distance measurement accuracy of 2mm + 2ppm. 【Features】 ○ The highest precision model designed for measurement tasks that require accuracy, such as displacement measurement of tunnels and control of shield machines. ○ It boasts unparalleled accuracy with an angle measurement precision of 1 second and a distance measurement precision of 2mm + 2ppm, recognized for its capabilities in large-scale projects worldwide. ○ The built-in automatic sighting and tracking function (ATR) automatically recognizes prisms and sights accurately, completely eliminating human factors such as inexperience or mistakes by the operator. ○ With motor-driven functionality, it is suitable for directing to any point and capturing temporal changes, such as displacement measurement through continuous measurement. For more details, please contact us or download the catalog.

The automatic aiming total station TCRA1203 features high-precision measurement technology and functions that reduce work time, including angle and distance measurement (IR), non-prism distance measurement pinpoint technology, automatic aiming (ATR), and automatic tracking (lock). 【Features】 ○ Achieves high-speed and high-precision distance measurement by aligning the sighting axis and the optical axis of the distance meter coaxially. ○ Equipped with an EDM that allows selection of various measurement modes, capable of measuring distances up to 3 km when using a single-element prism. ○ Coaxially aligns the sighting axis and visible light laser. ○ Enables unprecedented measurement range (up to 500 m) and can measure targets that are extremely close, such as building corners, with very high precision. ○ Adopts a compact, lightweight, and high-capacity lithium-ion battery. For more details, please contact us or download the catalog.

The ultra-precision electronic level measure TX-21, in combination with a rotating irradiation type level planer, enables high-precision real-time measurement of structural displacement and tilting, as well as extensive ground subsidence measurement. It achieves unmanned measurement and remote centralized management. 【Components】 ○ Main unit ○ AC cable ○ Grounding adapter ○ Storage case ○ Instruction manual For more details, please contact us or download the catalog.

The Precision Tilting Level N3 is a tilting-type precision level used for first-class leveling surveys and industrial measurements. It comes with a parallel plane micrometer, and the direct reading scale is 0.1 millimeters. Certified by the Geospatial Information Authority of Japan, it has a standard deviation of ±0.2mm over a 1km round trip. It is ideal for precision leveling surveys, deformation or subsidence measurements, and industrial measurements. 【Features】 ○ Certified first-class leveling instrument by the Geospatial Information Authority of Japan ○ Ideal for precision leveling surveys, deformation or subsidence measurements, and industrial measurements ○ Equipped with a new pan-focal telescope ○ The shortest focusing distance is extremely short (45cm), and it has a tilting screw for gradient measurement ○ Standard deviation over a 1km round trip: ±0.2mm For more details, please contact us or download the catalog.

Waterproof angle measurement unit 5″/10″. Parallel light and focused beam serve dual purposes. The Laser Digital Theodolite LDT50S can be used for direction control, marking, alignment, and positioning in tunnel, shield, and thrust construction methods. 【Features】 ○ Uses laser diode ○ Beam spot close to a perfect circle ○ Easy one-touch switching between focused beam and parallel light ○ Two-stage laser output switching ○ Laser reach of over 400m For more details, please contact us or download the catalog.

The automatic zenith vertical instrument ZL is used in places that require high precision vertical accuracy, such as in the construction of high-rise buildings. By looking through the vertical instrument at measurement points (targets) installed at the top of the structure, deviations can be confirmed. Additionally, when used with the laser eyepiece (DL2), confirmation can be made on the target side. The standard deviation is 0.5mm at 100m (1:200,000), providing high precision, and the leveling plate is detachable. 【Features】 ○ For high-precision vertical management in the construction of high-rise buildings ○ Enables high-precision vertical management compared to other vertical instruments ○ The automatic correction device quickly and accurately determines the zenith vertical direction 　Standard deviation is 0.5mm at 100m (1:200,000) ○ Vertical accuracy is high precision at ±0.5mm/100m upwards, and the leveling plate GDF21 is detachable 　The automatically equipped correction device at right angles quickly and accurately determines the vertical direction ○ By using the optional laser eyepiece (DL2), surfaces that cannot be touched can be measured using the laser spot as the target → Laser measurement range: 150m during the day, 400m at night for long-distance projection For more details, please contact us or download the catalog.

The Gyro Station GP1-2A consists of a pendulous gyro unit for true north measurement (freely in two axial directions) and a total station SET3110, which has a built-in program for true north measurement and calculation. By utilizing mechanical properties, true north measurement can be performed at any time, place, or weather, eliminating the need for manual notebooks, stopwatches, calculators, and other tools. The surveyor simply tracks and observes the precession of the gyro and presses a key on the connected keyboard SF10 of the total station. At the end of the measurement, the azimuth is displayed on the upper display and the horizontal angle on the lower display. Moreover, the accuracy is within a standard deviation of 20″. 【Features】 ○ Centerline surveying of roads and shields ○ Direction angle installation when there are visibility obstructions ○ True north measurement for shadow calculations For more details, please contact us or download the catalog.

The automatic tracking total station TS15 I is equipped with a variety of image capture functions and features a newly revamped, user-friendly interface that enables intuitive and accurate measurement tasks. Capture everything on site in images! The Leica Viva "TS15" is a high-performance total station equipped with imaging capabilities and easy-to-use SmartWorx Viva software. 【Features】 ○ Capture images and record screen information with screenshots ○ Write text or drawings directly on the screen for recording ○ Link image data to measurement data ○ Tap on the screen, and the instrument will automatically rotate in the tapped direction ○ Simply tap the prism you want to measure, and then press the measurement button to complete the measurement For more details, please contact us or download the catalog.

The TruPulse 360R is a next-generation laser measuring device that can measure "straight distance," "horizontal distance," "vertical distance," "slope angle," "height of the target," and "azimuth" with high precision and simple operation. It allows for three-dimensional distance measurement with simple button operations. The tilt sensor and azimuth compass are always active, enabling instant calculation of the "distance" to distant targets, as well as "height," "spacing," "elevation difference," and "azimuth." 【Features】 - Cooperative grip that adapts to all field environments - Completely waterproof and robust body - Bluetooth communication is standard - Simple button operation - Instant measurement of 11 types of distance, height, and angle Please contact us for more details.