レックス List of Products and Services

This is a handy type weighing only 1.2 kg, designed for easy portability for inspections at sites and factories where solar panels are installed. The large LCD display shows the measurement menu selection and measurement results using control keys, and it can store over 200 measurement data in memory. Furthermore, by pre-registering the rated data of the solar panels being measured, it is possible to determine the pass or fail of the STC measurement data.

• Solar power generator

The photoionization gas detection sensor (PID) installed in this device has a wide detection range of 0 to 15,000 ppm, making it suitable for a variety of applications, from industrial to environmental health, for detecting gas leaks and hazardous substances. It is an ideal device that can be used for various applications, from industrial hygiene to indoor air quality and military use.

• Other environmental analysis equipment

Handheld (portable) X-ray fluorescence analyzers are currently used for various purposes, including PMI (plant equipment material verification), distinguishing steel grades in recycled metals, and quality control during product shipment and material acceptance. The greatest advantage is the ability to conduct non-destructive testing without cutting samples, allowing for analysis in any setting without compromising the value of the product. It can perform not only identification of aluminum alloys but also quantitative analysis within a few seconds of measurement. It is battery-operated and weighs approximately 1.7 kg, making it lightweight. The compact body is designed with usability in mind, significantly excelling in analysis speed and display functions, utilizing the best technology in handheld form. For more details, please contact us or refer to the catalog.

• X-ray fluorescence analyzer
• X-ray inspection equipment

It can measure both the 1 cm dose equivalent rate and the integrated 1 cm dose equivalent in two modes. Additionally, it is a versatile ionization chamber survey meter that can detect beta rays when the cap on the front of the ionization chamber is removed. It is capable of measurements up to the medium dose range and has excellent energy characteristics.

• Radiation detector

The 38DL PLUS is compatible with most inspection applications for ultrasonic thickness measurement and can use all types of probes, including dual-element and single-element probes. It can be used for a wide range of applications, from measuring wall thickness of internally corroded pipes with dual-element probes to accurately measuring the thickness of thin or multi-layer materials with single-element probes.

• Other measurement, recording and measuring instruments

The compact and lightweight body is equipped with sensors for compass, tilt, pressure, and temperature, which are recorded in the built-in memory. The sensor head is configured with three transducers tilted at 25 degrees, using three ultrasonic beams to obtain flow velocity profiles at any layer thickness (minimum 30 cm) and up to a maximum of 128 layers. With the standard 9MB memory and internal battery, it can conduct observations for 2 to 4 months. Additionally, by adding more batteries, the observation period can be further extended.

• Other measurement, recording and measuring instruments

It is compliant with dust and drip-proof standard IP66, equipped with software that conforms to JIS Z 3060, allowing inspections that meet Japanese welding inspection standards.

• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

DynaMIC is a hardness tester that adopts a rebound method and features an automatic impact direction correction function (patented) compliant with ASTM A956. The operation is simple; just place the impact device on the test material and read the measurement value. You can choose from several types of impact devices to suit your material and application. The DynaMIC DL, equipped with a data logging function, allows you to store measurement data internally.

• Defect Inspection Equipment

DynaPOCKET is a pocket-sized high-performance altitude measuring device using a rebound method (compliant with ASTM A956). It integrates the impact device and display unit to achieve a lightweight and compact design. Operation is also simple, allowing for one-touch measurement of averages and scale conversions.

• Other inspection equipment and devices

The Bearing Checker BC100 is a portable measuring instrument that has shock pulse measurement as its main measurement function, capable of diagnosing the condition of bearings, which are the most common cause of failures among the components of rotating machinery.

• Metal bearings

The whole-body vibration measurement device consists of a seat pickup PV-62, a 3-axis accelerometer VM-54, and a whole-body vibration measurement card, enabling measurements and evaluations as specified by the standards. Its application involves placing an acceleration pickup on a vehicle seat and sitting on it to measure the vibrations that the vehicle imparts to the body.

• Vibration Inspection

Supply air masks are respiratory protective equipment used in workplaces, fire scenes, ships, tunnels, and other locations where there is a risk of inhaling oxygen-deficient air, particulate matter, toxic gases, or vapors. They are typically used as airline masks. In case of an emergency where the supply of air is interrupted or as needed for work, they are designed to receive air from a portable high-pressure air container (air cylinder) and can be used as air respirators.

• mask

It is used to monitor and record the power quality of factories and buildings. It is an analysis device that can identify the causes when problems occur.

• Power Supplies

By combining with the LR200 light receiver, we have achieved a high sensitivity range of ±0.5mm or ±2mm with a diameter of 500m. ★ For more details, please check the product page from the link below. ★ You can also obtain the comprehensive catalog (electronic) from the "PDF Download" materials. ★ You can request a quote from the "Contact Us" section. Please feel free to do so.

• Analytical Equipment and Devices

A multi-channel waveform generator with function generator capabilities and arbitrary waveform generation capabilities. The function generator has eight basic waveforms built-in, including sine waves and square waves. Additionally, the arbitrary waveform output features a memory length of 128,000 words, a clock rate of 10 MHz, and a resolution of 16 bits, allowing for long-duration and high-quality waveform output. Both the function generator and arbitrary waveform generation functions support sweep capabilities for various parameters such as frequency and amplitude, making it a waveform generator that can easily provide diverse conditions as a signal source for evaluation.

• Other electronic measuring instruments

It features a robust all-stainless steel body and is designed with intrinsic safety and explosion-proof structure, making it usable in hazardous locations.

• Scale

The bearing wear condition before the vibration value increases can be understood. Abnormalities in the ultra-low speed rotation range, which are difficult to diagnose using vibration methods, can be easily diagnosed.

• Hydraulic Equipment

The wear condition of the shaft can be understood before the vibration values increase. Abnormalities in the ultra-low speed rotation range, which are difficult to diagnose with vibration methods, can be easily diagnosed.

• Hydraulic Equipment

You can adjust it with the feeling of looking at a bubble level while watching the monitor screen. This fundamentally improves the conventional leveling work and expands the measurement range (±0.3°).

• Other measurement, recording and measuring instruments

The current weather gauge PWD22 detects precipitation using a capacitive rain sensor. Additionally, by combining forward scattering optical data with temperature measurements, it distinguishes whether the precipitation is rain, snow, or another type of precipitation phenomenon. This result is output as a weather type indicated by WMO code or NWS code.

• Other environmental analysis equipment

The PWD20 measures visibility based on the principle of forward scattering. It is calibrated using a high-precision transmissometer as a standard. The optical sensor part that measures visibility is installed inside a downward-facing hood, which protects the lens from precipitation and dust. Its structure, capable of withstanding harsh weather, allows for stable and reliable measurements over a long period. In areas where there is a risk of snow and ice accumulation in winter, an optional hood heater is effective.

• Other environmental analysis equipment

Phasec 3 is a basic model suitable for a wide range of applications, from high-frequency surface inspection to low-frequency subsurface inspection. It is also capable of measuring conductivity and coating thickness.

• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

The resistance meter RM3542-01 can measure the DC resistance of resistors and ferrite beads quickly and accurately using the DC four-terminal method. This device is equipped with high-performance contact check functionality, comparator functionality, and data output functionality. Additionally, its intuitive user interface and high noise resistance make it ideal for taping machines and sorting machines.

• Insulation Tester

The LD-5D type is a relative concentration meter that employs a sheath air mechanism in the detection unit and incorporates a built-in suction pump, enabling measurements in relatively high dust concentration work environments such as tunnel construction sites. The relative concentration requires the determination of a mass concentration conversion coefficient (K value) based on the filtration collection method, and it needs to be corrected to mass concentration. However, the LD-5D allows for easy conversion and display of measurement values to mass concentration by inputting the mass concentration conversion coefficient in advance. Furthermore, it has similar characteristics to existing dust meters (laser light source type), allowing the use of previously established mass concentration conversion coefficients in the same work environment.

• Other environmental analysis equipment

This is a high-speed waveform recorder with enhanced performance in the basic area of "waveform recording," making field measurements easier, featuring color display, A4 size, and 4ch or 8ch capabilities. The 8835-01 Memory HiCorder inherits the functions of the previous 8835 Memory HiCorder, supports a range of input units for various signals, offers double the channels compared to the previous model with 8ch, and has memory capacity that is eight times greater than that of the previous model, enabling long-duration recording. *When using the 8946 4ch analog unit, the maximum input is 30Vrms or 60VDC.

• Other electronic measuring instruments

Achieving a resolution of 1/2.2 million (220g/0.1mg), we reduced the total weight by approximately 50% through lightweight design, cut the size by about 10%, and decreased power consumption by approximately 60% through energy-saving measures.

• Scale

Rich output options allow for connections to various devices. With compatibility for the data logger (GL-160), easy data storage and infrared communication are possible even in hazardous locations.

• Scale

In pressure tests and insulation resistance tests, issues such as incorrect test results due to disconnection or poor contact of test leads and the impact of fluctuations in test voltage caused by variations in power supply voltage have been pointed out.

• Other electric meters

This single device achieves safe measurements along with high accuracy, wide bandwidth, high-speed data processing, and simultaneous measurements required for converter/inverter inter-measurements, power conditioner output measurements, and battery panel output measurements.

• Other electronic measuring instruments

Equipped with FFT analysis functionality, real-time analysis frequency of 20 kHz, a maximum dynamic range of 110 dB achieved through 24-bit A/D conversion, and featuring a TFT color LCD with excellent visibility in any environment.

• Vibration Inspection

The Clamp-On Power HiTester 3169-01 is a clamp-type power meter that can handle single-phase lines to three-phase four-wire lines with just one unit. In addition to basic measurements such as voltage, current, power, power factor, and cumulative values, it can simultaneously perform demand measurements and harmonic measurements, which are important for power management and energy-saving measures.

• Ammeter
• Power meter
• Voltage Meter

The increase in computers and inverter devices has significantly affected the capacitive current component in leakage current measurements. In this case, accurate insulation management cannot be achieved with leakage current (Io) measurements, and it becomes necessary to measure Ior.

• Other electronic measuring instruments

The 3145 is a noise measurement device specifically designed for measuring noise that varies in frequency and level over time, as well as single transient noises like surges.

• Other electronic measuring instruments

It can measure both the 1 cm dose equivalent rate and the integrated 1 cm dose equivalent in two modes. Additionally, it is a versatile ionization chamber survey meter that can detect beta rays when the cap on the front of the ionization chamber is removed. It is capable of measurements up to the medium dose range and has excellent energy characteristics.

• Radiation detector

This is a standard scintillation survey meter using a NaI(Tl) scintillation detector with a diameter of 1 inch and a length of 1 inch. It is ideal for measuring dose rates of gamma rays and X-rays.

• Radiation detector

The RadEye G-10 enables the measurement of cumulative dose values as a personal dosimeter and dose rate measurement as a radiation measurement device. It supports a wide gamma-ray measurement range from 0.05 μSv/h to 100 mSv/h, providing quick and highly reliable measurement data.

• Radiation detector

The EPD Mk2 is an electronic personal dosimeter that has excellent response to gamma rays, beta rays, and X-rays. It also has a wide energy range with sensitivity from 15 keV to 10 MeV.

• Radiation detector

This is an ionization chamber survey meter that measures 1 cm dose equivalent. The measurement range is 0 to 50 mSv/h, and the measurement resolution is 0.01 µSv/h. *Please note that it cannot be taken on airplanes as it contains argon gas.

• Radiation detector

The TC-32K is a compact handheld measuring device that fits comfortably in one hand. It has a drip-proof design, making it safe to use outdoors. The terminal section for connecting sensors features a one-touch type (patented) that allows for easy connection with lead wires and banana plugs, enabling quick measurements.

• Other electronic measuring instruments

You can monitor footage from a real-time network camera remotely. You can control the camera's direction to view the desired location. It can be installed anywhere that has mobile phone reception. There are no distance limitations like with wireless LAN. Solar and battery operation options are also available.

• Color camera

The DPG100 allows for easy installation and operation of pull-out tests. It is a compact testing machine that provides great peace of mind for anchor installers, design offices, construction workers, and clients, enabling simple testing. It can measure up to 100 kN.

• Other measurement, recording and measuring instruments

The cable drum frame is equipped with small tires for transportation, making it useful in sites with frequent movement, such as civil engineering and sewer work. It is suitable for inspecting pipe diameters ranging from 50mm to 350mm, and with a fiberglass cable of 11mm in diameter, it allows for pushing into pipes and ensures reliable inspection in vertical piping with a 100m cable, functioning as a pipe inspection camera.

• Other inspection equipment and devices

The protection level is equivalent to IP67, ensuring safety for outdoor work. With an intrinsically safe explosion-proof structural design, it can be used even in hydrogen and acetylene atmospheres under Group 2C.

• Other measurement, recording and measuring instruments

The dual-type thickness gauge LZ-370 is a dual-type thickness gauge capable of measuring non-magnetic coatings on magnetic materials and insulating coatings on non-magnetic metals. It is the ideal thickness gauge for field use, handling a variety of materials and coatings.

• Coating thickness gauge

Apply a high voltage of 1 to 6 kV to short-circuit the coating defect area, generating a spark for detection. It comes with a buzzer and lamp, and the target coating thickness is 1 mm or less. Due to its low-frequency pulse type and microcurrent design, it allows for high voltage pinhole inspection without damaging the coating.

• Visual Inspection Equipment